! Started logfile: J0710+4732_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:41:39 2019 obs J0710+4732_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0710+4732_S_2017_05_31_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764103 visibilities/baseline/integration-bin. ! Found source: J0710+4732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0710+4732_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.581876Jy sigma=0.005321 ! Fit after self-cal, rms=0.573852Jy sigma=0.005253 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=11.17 mas, bpa=30.28 degrees ! Estimated noise=3020.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.33451 Jy ! Component: 100 - total flux cleaned = 0.425926 Jy ! Total flux subtracted in 100 components = 0.425926 Jy ! Clean residual min=-0.019533 max=0.039330 Jy/beam ! Clean residual mean=-0.000098 rms=0.006998 Jy/beam ! Combined flux in latest and established models = 0.425926 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.425926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108111Jy sigma=0.000970 ! Fit after self-cal, rms=0.107961Jy sigma=0.000969 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=11.2 mas, bpa=32.02 degrees ! Estimated noise=2059.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449966 Jy ! Component: 100 - total flux cleaned = 0.0658612 Jy ! Component: 150 - total flux cleaned = 0.0781914 Jy ! Component: 200 - total flux cleaned = 0.0863128 Jy ! Total flux subtracted in 200 components = 0.0863128 Jy ! Clean residual min=-0.009937 max=0.011848 Jy/beam ! Clean residual mean=0.000024 rms=0.002985 Jy/beam ! Combined flux in latest and established models = 0.512239 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.512239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089913Jy sigma=0.000782 ! Fit after self-cal, rms=0.089813Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.00* KP 1.00 ! LA 1.06 MK 1.06 NL 0.91 OV 0.98 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.99 HN 1.00* KP 0.97 ! LA 0.99 MK 1.02 NL 1.03 OV 1.03 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.01 HN 1.00* KP 0.99 ! LA 1.03 MK 1.08 NL 0.97 OV 0.93 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 1.11 MK 1.17 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.089813Jy sigma=0.000781 ! Fit after self-cal, rms=0.078501Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=11.19 mas, bpa=32.07 degrees ! Estimated noise=2049.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234932 Jy ! Component: 100 - total flux cleaned = 0.00252197 Jy ! Component: 150 - total flux cleaned = 0.00227052 Jy ! Component: 200 - total flux cleaned = 0.00215568 Jy ! Total flux subtracted in 200 components = 0.00215568 Jy ! Clean residual min=-0.005937 max=0.006019 Jy/beam ! Clean residual mean=0.000012 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.514394 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.514394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077773Jy sigma=0.000675 ! Fit after self-cal, rms=0.077774Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077774Jy sigma=0.000674 ! Fit after self-cal, rms=0.077966Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=11.16 mas, bpa=32.08 degrees ! Estimated noise=2051.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220795 Jy ! Component: 100 - total flux cleaned = 0.00210314 Jy ! Component: 150 - total flux cleaned = 0.00210761 Jy ! Component: 200 - total flux cleaned = 0.00210677 Jy ! Total flux subtracted in 200 components = 0.00210677 Jy ! Clean residual min=-0.005304 max=0.005214 Jy/beam ! Clean residual mean=0.000011 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.516501 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.516501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077675Jy sigma=0.000671 ! Fit after self-cal, rms=0.077664Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012976 Jy ! Component: 100 - total flux cleaned = -7.8246e-05 Jy ! Component: 150 - total flux cleaned = -0.000264858 Jy ! Component: 200 - total flux cleaned = -0.000264588 Jy ! Total flux subtracted in 200 components = -0.000264588 Jy ! Clean residual min=-0.005185 max=0.005003 Jy/beam ! Clean residual mean=0.000011 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.516237 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.516237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077554Jy sigma=0.000670 ! Fit after self-cal, rms=0.077548Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077548Jy sigma=0.000670 ! Fit after self-cal, rms=0.077650Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=11.13 mas, bpa=32.1 degrees ! Estimated noise=2052.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153536 Jy ! Component: 100 - total flux cleaned = 0.00183555 Jy ! Component: 150 - total flux cleaned = 0.00188995 Jy ! Component: 200 - total flux cleaned = 0.00189198 Jy ! Total flux subtracted in 200 components = 0.00189198 Jy ! Clean residual min=-0.004976 max=0.004824 Jy/beam ! Clean residual mean=0.000010 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.518129 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.518129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077560Jy sigma=0.000669 ! Fit after self-cal, rms=0.077560Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119206 Jy ! Component: 100 - total flux cleaned = 7.66429e-05 Jy ! Component: 150 - total flux cleaned = -3.93908e-05 Jy ! Component: 200 - total flux cleaned = -7.50159e-05 Jy ! Total flux subtracted in 200 components = -7.50159e-05 Jy ! Clean residual min=-0.004927 max=0.004720 Jy/beam ! Clean residual mean=0.000010 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.518053 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.518054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077520Jy sigma=0.000668 ! Fit after self-cal, rms=0.077519Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077519Jy sigma=0.000668 ! Fit after self-cal, rms=0.077574Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.747 mas, bmaj=11.4 mas, bpa=32.05 degrees ! Estimated noise=2451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109563 Jy ! Component: 100 - total flux cleaned = 0.000952872 Jy ! Component: 150 - total flux cleaned = 0.000952564 Jy ! Component: 200 - total flux cleaned = 0.000905009 Jy ! Total flux subtracted in 200 components = 0.000905009 Jy ! Clean residual min=-0.006668 max=0.006155 Jy/beam ! Clean residual mean=0.000017 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.518959 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 0.518959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077563Jy sigma=0.000668 ! Fit after self-cal, rms=0.077560Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103132 Jy ! Component: 100 - total flux cleaned = -0.000154577 Jy ! Component: 150 - total flux cleaned = -0.000176648 Jy ! Component: 200 - total flux cleaned = -0.00021298 Jy ! Total flux subtracted in 200 components = -0.00021298 Jy ! Clean residual min=-0.006643 max=0.006133 Jy/beam ! Clean residual mean=0.000017 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.518746 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 0.518746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077563Jy sigma=0.000668 ! Fit after self-cal, rms=0.077562Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=11.12 mas, bpa=32.12 degrees ! Estimated noise=2052.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 11.12 at 32.12 degrees (North through East) ! Clean map min=-0.004661 max=0.43452 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=11.09 mas, bpa=30.2 degrees ! Estimated noise=3024.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334785 Jy ! Component: 100 - total flux cleaned = 0.424894 Jy ! Component: 150 - total flux cleaned = 0.465737 Jy ! Component: 200 - total flux cleaned = 0.486888 Jy ! Total flux subtracted in 200 components = 0.486888 Jy ! Clean residual min=-0.010155 max=0.011706 Jy/beam ! Clean residual mean=-0.000035 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.486888 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.486888 Jy ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=11.12 mas, bpa=32.12 degrees ! Estimated noise=2052.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149958 Jy ! Component: 100 - total flux cleaned = 0.0234635 Jy ! Component: 150 - total flux cleaned = 0.0266316 Jy ! Component: 200 - total flux cleaned = 0.028716 Jy ! Total flux subtracted in 200 components = 0.028716 Jy ! Clean residual min=-0.005817 max=0.006107 Jy/beam ! Clean residual mean=0.000001 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.515604 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 44 components and 0.515604 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.747 mas, bmaj=11.4 mas, bpa=32.05 degrees ! Estimated noise=2451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314103 Jy ! Component: 100 - total flux cleaned = 0.00338256 Jy ! Component: 150 - total flux cleaned = 0.00344692 Jy ! Component: 200 - total flux cleaned = 0.00339225 Jy ! Total flux subtracted in 200 components = 0.00339225 Jy ! Clean residual min=-0.007104 max=0.006205 Jy/beam ! Clean residual mean=0.000018 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 0.518996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.93548e-07 Jy ! Component: 100 - total flux cleaned = -4.14891e-05 Jy ! Component: 150 - total flux cleaned = -7.76499e-05 Jy ! Component: 200 - total flux cleaned = -0.000107491 Jy ! Total flux subtracted in 200 components = -0.000107491 Jy ! Clean residual min=-0.006975 max=0.006239 Jy/beam ! Clean residual mean=0.000018 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.518889 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 76 components and 0.518889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=11.12 mas, bpa=32.12 degrees ! Estimated noise=2052.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599486 Jy ! Component: 100 - total flux cleaned = -0.000396573 Jy ! Component: 150 - total flux cleaned = -0.000302362 Jy ! Component: 200 - total flux cleaned = -0.000216514 Jy ! Total flux subtracted in 200 components = -0.000216514 Jy ! Clean residual min=-0.005329 max=0.005563 Jy/beam ! Clean residual mean=0.000008 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.518672 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.518672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077879Jy sigma=0.000670 ! Fit after self-cal, rms=0.077855Jy sigma=0.000670 wmodel J0710+4732_S_2017_05_31_pus_map.mod ! Writing 86 model components to file: J0710+4732_S_2017_05_31_pus_map.mod wobs J0710+4732_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0710+4732_S_2017_05_31_pus_uvs.fits wwins J0710+4732_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0710+4732_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117442 Jy ! Component: 100 - total flux cleaned = 0.00195785 Jy ! Component: 150 - total flux cleaned = 0.00227026 Jy ! Component: 200 - total flux cleaned = 0.00234121 Jy ! Component: 250 - total flux cleaned = 0.00247552 Jy ! Component: 300 - total flux cleaned = 0.00228769 Jy ! Component: 350 - total flux cleaned = 0.00217109 Jy ! Component: 400 - total flux cleaned = 0.00188837 Jy ! Component: 450 - total flux cleaned = 0.00177998 Jy ! Component: 500 - total flux cleaned = 0.00162394 Jy ! Component: 550 - total flux cleaned = 0.0013285 Jy ! Component: 600 - total flux cleaned = 0.00128108 Jy ! Component: 650 - total flux cleaned = 0.00123676 Jy ! Component: 700 - total flux cleaned = 0.00110679 Jy ! Component: 750 - total flux cleaned = 0.000981099 Jy ! Component: 800 - total flux cleaned = 0.000859125 Jy ! Component: 850 - total flux cleaned = 0.000819712 Jy ! Component: 900 - total flux cleaned = 0.000781686 Jy ! Component: 950 - total flux cleaned = 0.000819417 Jy ! Component: 1000 - total flux cleaned = 0.000819507 Jy ! Component: 1050 - total flux cleaned = 0.000962058 Jy ! Component: 1100 - total flux cleaned = 0.000997437 Jy ! Component: 1150 - total flux cleaned = 0.00116996 Jy ! Component: 1200 - total flux cleaned = 0.00137154 Jy ! Component: 1250 - total flux cleaned = 0.00143671 Jy ! Component: 1300 - total flux cleaned = 0.00166206 Jy ! Component: 1350 - total flux cleaned = 0.00172482 Jy ! Component: 1400 - total flux cleaned = 0.00188019 Jy ! Component: 1450 - total flux cleaned = 0.00191034 Jy ! Component: 1500 - total flux cleaned = 0.00203065 Jy ! Component: 1550 - total flux cleaned = 0.00211927 Jy ! Component: 1600 - total flux cleaned = 0.00226452 Jy ! Component: 1650 - total flux cleaned = 0.00234982 Jy ! Component: 1700 - total flux cleaned = 0.00234936 Jy ! Component: 1750 - total flux cleaned = 0.00240521 Jy ! Component: 1800 - total flux cleaned = 0.00248774 Jy ! Component: 1850 - total flux cleaned = 0.0025948 Jy ! Component: 1900 - total flux cleaned = 0.0025676 Jy ! Component: 1950 - total flux cleaned = 0.00246426 Jy ! Component: 2000 - total flux cleaned = 0.0024905 Jy ! Component: 2050 - total flux cleaned = 0.00241459 Jy ! Component: 2100 - total flux cleaned = 0.00233979 Jy ! Component: 2150 - total flux cleaned = 0.00226596 Jy ! Component: 2200 - total flux cleaned = 0.00216859 Jy ! Component: 2250 - total flux cleaned = 0.00202453 Jy ! Component: 2300 - total flux cleaned = 0.00190602 Jy ! Component: 2350 - total flux cleaned = 0.0018123 Jy ! Component: 2400 - total flux cleaned = 0.00174247 Jy ! Component: 2450 - total flux cleaned = 0.0016966 Jy ! Component: 2500 - total flux cleaned = 0.00158301 Jy ! Component: 2550 - total flux cleaned = 0.00153837 Jy ! Component: 2600 - total flux cleaned = 0.00147188 Jy ! Component: 2650 - total flux cleaned = 0.00140594 Jy ! Component: 2700 - total flux cleaned = 0.00136234 Jy ! Component: 2750 - total flux cleaned = 0.00131955 Jy ! Component: 2800 - total flux cleaned = 0.00125566 Jy ! Component: 2850 - total flux cleaned = 0.00121352 Jy ! Component: 2900 - total flux cleaned = 0.00121359 Jy ! Component: 2950 - total flux cleaned = 0.00123452 Jy ! Component: 3000 - total flux cleaned = 0.00123459 Jy ! Component: 3050 - total flux cleaned = 0.00127567 Jy ! Component: 3100 - total flux cleaned = 0.00131641 Jy ! Component: 3150 - total flux cleaned = 0.00137717 Jy ! Component: 3200 - total flux cleaned = 0.00135722 Jy ! Component: 3250 - total flux cleaned = 0.00147718 Jy ! Component: 3300 - total flux cleaned = 0.00151679 Jy ! Component: 3350 - total flux cleaned = 0.00159575 Jy ! Component: 3400 - total flux cleaned = 0.0016154 Jy ! Component: 3450 - total flux cleaned = 0.00171278 Jy ! Component: 3500 - total flux cleaned = 0.00177066 Jy ! Component: 3550 - total flux cleaned = 0.00180912 Jy ! Component: 3600 - total flux cleaned = 0.00186663 Jy ! Component: 3650 - total flux cleaned = 0.00192388 Jy ! Component: 3700 - total flux cleaned = 0.00194286 Jy ! Component: 3750 - total flux cleaned = 0.00196189 Jy ! Component: 3800 - total flux cleaned = 0.002056 Jy ! Component: 3850 - total flux cleaned = 0.00213093 Jy ! Component: 3900 - total flux cleaned = 0.00216811 Jy ! Component: 3950 - total flux cleaned = 0.00220515 Jy ! Component: 4000 - total flux cleaned = 0.00224207 Jy ! Component: 4050 - total flux cleaned = 0.0022237 Jy ! Total flux subtracted in 4096 components = 0.00227871 Jy ! Clean residual min=-0.001016 max=0.001081 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.520951 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 349 components and 0.520951 Jy ![Exited script file: muppet] wmap "J0710+4732_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 11.12 at 32.12 degrees (North through East) ! Clean map min=-0.002176 max=0.43482 Jy/beam ! Writing clean map to FITS file: J0710+4732_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315769 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.217862 0.217862 0.435724 0.871449 1.7429 3.4858 6.97159 13.9432 27.8864 55.7727 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.384 x 11.12 at 32.12 degrees (North through East) ! Clean map min=-0.002176 max=0.43482 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0710+4732_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:41:43 2019