! Started logfile: J0710+4732_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:34:54 2019 obs J0710+4732_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0710+4732_S_2017_03_27_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.575926 visibilities/baseline/integration-bin. ! Found source: J0710+4732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0710+4732_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.579729Jy sigma=0.005220 ! Fit after self-cal, rms=0.572298Jy sigma=0.005156 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.134 mas, bmaj=10.74 mas, bpa=46.82 degrees ! Estimated noise=3707.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335378 Jy ! Component: 100 - total flux cleaned = 0.425256 Jy ! Total flux subtracted in 100 components = 0.425256 Jy ! Clean residual min=-0.020734 max=0.040660 Jy/beam ! Clean residual mean=-0.000360 rms=0.008181 Jy/beam ! Combined flux in latest and established models = 0.425256 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.425256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103518Jy sigma=0.000927 ! Fit after self-cal, rms=0.103332Jy sigma=0.000926 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.212 mas, bmaj=10.86 mas, bpa=52.35 degrees ! Estimated noise=2441.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485977 Jy ! Component: 100 - total flux cleaned = 0.071193 Jy ! Component: 150 - total flux cleaned = 0.0833387 Jy ! Component: 200 - total flux cleaned = 0.0905242 Jy ! Total flux subtracted in 200 components = 0.0905242 Jy ! Clean residual min=-0.009726 max=0.011382 Jy/beam ! Clean residual mean=-0.000191 rms=0.002941 Jy/beam ! Combined flux in latest and established models = 0.51578 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.51578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081377Jy sigma=0.000704 ! Fit after self-cal, rms=0.081152Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00* KP 1.02 ! LA 0.97 MK 1.05 NL 0.99 OV 0.99 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.00* KP 0.98 ! LA 0.94 MK 1.01 NL 1.03 OV 1.03 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 1.00* KP 1.01 ! LA 0.99 MK 1.08 NL 0.98 OV 0.95 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.11 HN 1.00* KP 1.00* ! LA 1.05 MK 0.89 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.081152Jy sigma=0.000702 ! Fit after self-cal, rms=0.076068Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.271 mas, bmaj=10.9 mas, bpa=52.21 degrees ! Estimated noise=2438.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 114.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809246 Jy ! Component: 100 - total flux cleaned = 0.0105986 Jy ! Component: 150 - total flux cleaned = 0.012185 Jy ! Component: 200 - total flux cleaned = 0.0136981 Jy ! Total flux subtracted in 200 components = 0.0136981 Jy ! Clean residual min=-0.004443 max=0.004650 Jy/beam ! Clean residual mean=-0.000037 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.529478 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.529478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075237Jy sigma=0.000645 ! Fit after self-cal, rms=0.075210Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075210Jy sigma=0.000645 ! Fit after self-cal, rms=0.075048Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.271 mas, bmaj=10.9 mas, bpa=52.2 degrees ! Estimated noise=2433.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149912 Jy ! Component: 100 - total flux cleaned = 0.00245412 Jy ! Component: 150 - total flux cleaned = 0.00296362 Jy ! Component: 200 - total flux cleaned = 0.00316315 Jy ! Total flux subtracted in 200 components = 0.00316315 Jy ! Clean residual min=-0.003899 max=0.004199 Jy/beam ! Clean residual mean=-0.000029 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.532641 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.532641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074940Jy sigma=0.000644 ! Fit after self-cal, rms=0.074930Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629481 Jy ! Component: 100 - total flux cleaned = 0.000849045 Jy ! Component: 150 - total flux cleaned = 0.00101326 Jy ! Component: 200 - total flux cleaned = 0.00124067 Jy ! Total flux subtracted in 200 components = 0.00124067 Jy ! Clean residual min=-0.003646 max=0.004073 Jy/beam ! Clean residual mean=-0.000027 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.533882 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.533882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074883Jy sigma=0.000643 ! Fit after self-cal, rms=0.074881Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074881Jy sigma=0.000643 ! Fit after self-cal, rms=0.074825Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.269 mas, bmaj=10.9 mas, bpa=52.15 degrees ! Estimated noise=2433.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595293 Jy ! Component: 100 - total flux cleaned = 0.000733735 Jy ! Component: 150 - total flux cleaned = 0.000797416 Jy ! Component: 200 - total flux cleaned = 0.000827234 Jy ! Total flux subtracted in 200 components = 0.000827234 Jy ! Clean residual min=-0.003621 max=0.003968 Jy/beam ! Clean residual mean=-0.000027 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.534709 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.534709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074795Jy sigma=0.000643 ! Fit after self-cal, rms=0.074792Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228744 Jy ! Component: 100 - total flux cleaned = 0.000286089 Jy ! Component: 150 - total flux cleaned = 0.00028648 Jy ! Component: 200 - total flux cleaned = 0.00025949 Jy ! Total flux subtracted in 200 components = 0.00025949 Jy ! Clean residual min=-0.003593 max=0.003915 Jy/beam ! Clean residual mean=-0.000027 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.534968 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.534968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074771Jy sigma=0.000643 ! Fit after self-cal, rms=0.074770Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074770Jy sigma=0.000643 ! Fit after self-cal, rms=0.074757Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.628 mas, bmaj=12.04 mas, bpa=60.35 degrees ! Estimated noise=2513.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371215 Jy ! Component: 100 - total flux cleaned = 0.000511631 Jy ! Component: 150 - total flux cleaned = 0.000562591 Jy ! Component: 200 - total flux cleaned = 0.000611645 Jy ! Total flux subtracted in 200 components = 0.000611645 Jy ! Clean residual min=-0.003580 max=0.003541 Jy/beam ! Clean residual mean=-0.000042 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.53558 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 0.53558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074746Jy sigma=0.000643 ! Fit after self-cal, rms=0.074741Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170268 Jy ! Component: 100 - total flux cleaned = 0.000194147 Jy ! Component: 150 - total flux cleaned = 0.000216817 Jy ! Component: 200 - total flux cleaned = 0.000261065 Jy ! Total flux subtracted in 200 components = 0.000261065 Jy ! Clean residual min=-0.003523 max=0.003536 Jy/beam ! Clean residual mean=-0.000043 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.535841 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 138 components and 0.535841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074734Jy sigma=0.000643 ! Fit after self-cal, rms=0.074731Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.267 mas, bmaj=10.9 mas, bpa=52.13 degrees ! Estimated noise=2433.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.267 x 10.9 at 52.13 degrees (North through East) ! Clean map min=-0.0035013 max=0.43813 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.173 mas, bmaj=10.82 mas, bpa=46.66 degrees ! Estimated noise=3693.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333929 Jy ! Component: 100 - total flux cleaned = 0.420859 Jy ! Component: 150 - total flux cleaned = 0.463437 Jy ! Component: 200 - total flux cleaned = 0.485275 Jy ! Total flux subtracted in 200 components = 0.485275 Jy ! Clean residual min=-0.010223 max=0.010912 Jy/beam ! Clean residual mean=-0.000097 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 0.485275 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.485275 Jy ! Inverting map and beam ! Estimated beam: bmin=6.267 mas, bmaj=10.9 mas, bpa=52.13 degrees ! Estimated noise=2433.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142252 Jy ! Component: 100 - total flux cleaned = 0.023261 Jy ! Component: 150 - total flux cleaned = 0.0295784 Jy ! Component: 200 - total flux cleaned = 0.0342643 Jy ! Total flux subtracted in 200 components = 0.0342643 Jy ! Clean residual min=-0.005032 max=0.004618 Jy/beam ! Clean residual mean=-0.000067 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.51954 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 49 components and 0.51954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.628 mas, bmaj=12.04 mas, bpa=60.35 degrees ! Estimated noise=2513.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428392 Jy ! Component: 100 - total flux cleaned = 0.00735952 Jy ! Component: 150 - total flux cleaned = 0.00947244 Jy ! Component: 200 - total flux cleaned = 0.0107109 Jy ! Total flux subtracted in 200 components = 0.0107109 Jy ! Clean residual min=-0.004147 max=0.003966 Jy/beam ! Clean residual mean=-0.000059 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.53025 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110784 Jy ! Component: 100 - total flux cleaned = 0.00204524 Jy ! Component: 150 - total flux cleaned = 0.00266648 Jy ! Component: 200 - total flux cleaned = 0.00310048 Jy ! Total flux subtracted in 200 components = 0.00310048 Jy ! Clean residual min=-0.003965 max=0.003665 Jy/beam ! Clean residual mean=-0.000052 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.533351 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 113 components and 0.533351 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.267 mas, bmaj=10.9 mas, bpa=52.13 degrees ! Estimated noise=2433.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546606 Jy ! Component: 100 - total flux cleaned = -0.000388101 Jy ! Component: 150 - total flux cleaned = -0.000338296 Jy ! Component: 200 - total flux cleaned = -7.84661e-05 Jy ! Total flux subtracted in 200 components = -7.84661e-05 Jy ! Clean residual min=-0.003909 max=0.003517 Jy/beam ! Clean residual mean=-0.000032 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.533272 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.533272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074835Jy sigma=0.000643 ! Fit after self-cal, rms=0.074817Jy sigma=0.000643 wmodel J0710+4732_S_2017_03_27_pus_map.mod ! Writing 131 model components to file: J0710+4732_S_2017_03_27_pus_map.mod wobs J0710+4732_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0710+4732_S_2017_03_27_pus_uvs.fits wwins J0710+4732_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J0710+4732_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118843 Jy ! Component: 100 - total flux cleaned = -0.00167411 Jy ! Component: 150 - total flux cleaned = -0.00200702 Jy ! Component: 200 - total flux cleaned = -0.00216439 Jy ! Component: 250 - total flux cleaned = -0.0022128 Jy ! Component: 300 - total flux cleaned = -0.00225832 Jy ! Component: 350 - total flux cleaned = -0.00225756 Jy ! Component: 400 - total flux cleaned = -0.00229934 Jy ! Component: 450 - total flux cleaned = -0.002299 Jy ! Component: 500 - total flux cleaned = -0.00237712 Jy ! Component: 550 - total flux cleaned = -0.00241591 Jy ! Component: 600 - total flux cleaned = -0.00238004 Jy ! Component: 650 - total flux cleaned = -0.00234416 Jy ! Component: 700 - total flux cleaned = -0.00234407 Jy ! Component: 750 - total flux cleaned = -0.0023444 Jy ! Component: 800 - total flux cleaned = -0.00228006 Jy ! Component: 850 - total flux cleaned = -0.00215422 Jy ! Component: 900 - total flux cleaned = -0.00206148 Jy ! Component: 950 - total flux cleaned = -0.00200154 Jy ! Component: 1000 - total flux cleaned = -0.00191366 Jy ! Component: 1050 - total flux cleaned = -0.00182776 Jy ! Component: 1100 - total flux cleaned = -0.00171539 Jy ! Component: 1150 - total flux cleaned = -0.00166083 Jy ! Component: 1200 - total flux cleaned = -0.0015796 Jy ! Component: 1250 - total flux cleaned = -0.00147316 Jy ! Component: 1300 - total flux cleaned = -0.00134287 Jy ! Component: 1350 - total flux cleaned = -0.00126616 Jy ! Component: 1400 - total flux cleaned = -0.0011154 Jy ! Component: 1450 - total flux cleaned = -0.000991989 Jy ! Component: 1500 - total flux cleaned = -0.00087094 Jy ! Component: 1550 - total flux cleaned = -0.000799613 Jy ! Component: 1600 - total flux cleaned = -0.000682105 Jy ! Component: 1650 - total flux cleaned = -0.000636022 Jy ! Component: 1700 - total flux cleaned = -0.000589926 Jy ! Component: 1750 - total flux cleaned = -0.000567337 Jy ! Component: 1800 - total flux cleaned = -0.000522668 Jy ! Component: 1850 - total flux cleaned = -0.000478717 Jy ! Component: 1900 - total flux cleaned = -0.000501046 Jy ! Component: 1950 - total flux cleaned = -0.000479596 Jy ! Component: 2000 - total flux cleaned = -0.000501048 Jy ! Component: 2050 - total flux cleaned = -0.000479954 Jy ! Component: 2100 - total flux cleaned = -0.000458924 Jy ! Component: 2150 - total flux cleaned = -0.000479711 Jy ! Component: 2200 - total flux cleaned = -0.000459048 Jy ! Component: 2250 - total flux cleaned = -0.000458972 Jy ! Component: 2300 - total flux cleaned = -0.000398335 Jy ! Component: 2350 - total flux cleaned = -0.000398482 Jy ! Component: 2400 - total flux cleaned = -0.000438184 Jy ! Component: 2450 - total flux cleaned = -0.000378665 Jy ! Component: 2500 - total flux cleaned = -0.000339246 Jy ! Component: 2550 - total flux cleaned = -0.000300144 Jy ! Component: 2600 - total flux cleaned = -0.000300138 Jy ! Component: 2650 - total flux cleaned = -0.000261467 Jy ! Component: 2700 - total flux cleaned = -0.000223093 Jy ! Component: 2750 - total flux cleaned = -0.000203991 Jy ! Component: 2800 - total flux cleaned = -0.000184921 Jy ! Component: 2850 - total flux cleaned = -9.0172e-05 Jy ! Component: 2900 - total flux cleaned = -9.0179e-05 Jy ! Component: 2950 - total flux cleaned = -7.12352e-05 Jy ! Component: 3000 - total flux cleaned = -3.36514e-05 Jy ! Component: 3050 - total flux cleaned = 2.25078e-05 Jy ! Component: 3100 - total flux cleaned = 5.98877e-05 Jy ! Component: 3150 - total flux cleaned = 9.70245e-05 Jy ! Component: 3200 - total flux cleaned = 0.000134026 Jy ! Component: 3250 - total flux cleaned = 0.000152584 Jy ! Component: 3300 - total flux cleaned = 0.000171136 Jy ! Component: 3350 - total flux cleaned = 0.000208078 Jy ! Component: 3400 - total flux cleaned = 0.000263319 Jy ! Component: 3450 - total flux cleaned = 0.000318639 Jy ! Component: 3500 - total flux cleaned = 0.000373724 Jy ! Component: 3550 - total flux cleaned = 0.000392069 Jy ! Component: 3600 - total flux cleaned = 0.000410548 Jy ! Component: 3650 - total flux cleaned = 0.000428894 Jy ! Component: 3700 - total flux cleaned = 0.000465521 Jy ! Component: 3750 - total flux cleaned = 0.000483991 Jy ! Component: 3800 - total flux cleaned = 0.000484122 Jy ! Component: 3850 - total flux cleaned = 0.000539544 Jy ! Component: 3900 - total flux cleaned = 0.000595014 Jy ! Component: 3950 - total flux cleaned = 0.000632191 Jy ! Component: 4000 - total flux cleaned = 0.000706514 Jy ! Component: 4050 - total flux cleaned = 0.000725319 Jy ! Total flux subtracted in 4096 components = 0.000818776 Jy ! Clean residual min=-0.001149 max=0.000981 Jy/beam ! Clean residual mean=-0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.534091 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 371 components and 0.534092 Jy ![Exited script file: muppet] wmap "J0710+4732_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.267 x 10.9 at 52.13 degrees (North through East) ! Clean map min=-0.0025385 max=0.43765 Jy/beam ! Writing clean map to FITS file: J0710+4732_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.437647 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332838 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.228156 0.228156 0.456311 0.912622 1.82524 3.65049 7.30098 14.602 29.2039 58.4078 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.437 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.267 x 10.9 at 52.13 degrees (North through East) ! Clean map min=-0.0025385 max=0.43765 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0710+4732_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:34:59 2019