! Started logfile: J0708-1421_S_2017_07_09_pus_uvs.log on Wed May 8 14:44:02 2019 obs J0708-1421_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0708-1421_S_2017_07_09_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775111 visibilities/baseline/integration-bin. ! Found source: J0708-1421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0708-1421_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 502 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880904Jy sigma=0.006735 ! Fit after self-cal, rms=0.856693Jy sigma=0.006559 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.546 mas, bmaj=7.1 mas, bpa=-5.053 degrees ! Estimated noise=1474.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107176 Jy ! Component: 100 - total flux cleaned = 0.16799 Jy ! Total flux subtracted in 100 components = 0.16799 Jy ! Clean residual min=-0.015393 max=0.043086 Jy/beam ! Clean residual mean=-0.000341 rms=0.005938 Jy/beam ! Combined flux in latest and established models = 0.16799 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.16799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136487Jy sigma=0.001080 ! Fit after self-cal, rms=0.135383Jy sigma=0.001074 ! Inverting map ! Added new window around map position (3.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452666 Jy ! Component: 100 - total flux cleaned = 0.0769802 Jy ! Total flux subtracted in 100 components = 0.0769802 Jy ! Clean residual min=-0.010448 max=0.028370 Jy/beam ! Clean residual mean=-0.000220 rms=0.003796 Jy/beam ! Combined flux in latest and established models = 0.24497 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 81 components and 0.24497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108930Jy sigma=0.000843 ! Fit after self-cal, rms=0.108255Jy sigma=0.000838 ! Inverting map ! Added new window around map position (-4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273749 Jy ! Component: 100 - total flux cleaned = 0.0473952 Jy ! Total flux subtracted in 100 components = 0.0473952 Jy ! Clean residual min=-0.006801 max=0.011731 Jy/beam ! Clean residual mean=-0.000145 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.292366 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.292366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096843Jy sigma=0.000737 ! Fit after self-cal, rms=0.096696Jy sigma=0.000736 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=8.23 mas, bpa=-5.356 degrees ! Estimated noise=1017.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024476 Jy ! Component: 100 - total flux cleaned = 0.0406838 Jy ! Component: 150 - total flux cleaned = 0.0517756 Jy ! Component: 200 - total flux cleaned = 0.0595065 Jy ! Total flux subtracted in 200 components = 0.0595065 Jy ! Clean residual min=-0.004644 max=0.008376 Jy/beam ! Clean residual mean=-0.000061 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.351872 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 179 components and 0.351872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089638Jy sigma=0.000674 ! Fit after self-cal, rms=0.089571Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.05 KP 0.99 ! LA 0.98 MK 1.07 NL 0.91 OV 1.04 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.04 KP 0.97 ! LA 0.94 MK 1.08 NL 1.09 OV 1.09 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.13 KP 0.99 ! LA 0.94 MK 0.95 NL 1.04 OV 0.98 ! PT 0.96 SC 0.82 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00 KP 1.00* ! LA 1.00* MK 0.49 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.089571Jy sigma=0.000673 ! Fit after self-cal, rms=0.086446Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.076 mas, bpa=-4.319 degrees ! Estimated noise=988.569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000443611 Jy ! Component: 100 - total flux cleaned = -0.000641633 Jy ! Component: 150 - total flux cleaned = -0.000479978 Jy ! Component: 200 - total flux cleaned = -0.000289623 Jy ! Total flux subtracted in 200 components = -0.000289623 Jy ! Clean residual min=-0.003376 max=0.004770 Jy/beam ! Clean residual mean=-0.000012 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.351582 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 186 components and 0.351582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086362Jy sigma=0.000662 ! Fit after self-cal, rms=0.086395Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086395Jy sigma=0.000662 ! Fit after self-cal, rms=0.086048Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=8.078 mas, bpa=-4.488 degrees ! Estimated noise=982.086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173015 Jy ! Component: 100 - total flux cleaned = 2.32329e-05 Jy ! Component: 150 - total flux cleaned = 5.36221e-05 Jy ! Component: 200 - total flux cleaned = 8.32047e-05 Jy ! Total flux subtracted in 200 components = 8.32047e-05 Jy ! Clean residual min=-0.003329 max=0.004133 Jy/beam ! Clean residual mean=-0.000000 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.351666 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 194 components and 0.351666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086020Jy sigma=0.000660 ! Fit after self-cal, rms=0.086030Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370583 Jy ! Component: 100 - total flux cleaned = 0.00427241 Jy ! Component: 150 - total flux cleaned = 0.00445608 Jy ! Component: 200 - total flux cleaned = 0.00440324 Jy ! Total flux subtracted in 200 components = 0.00440324 Jy ! Clean residual min=-0.002921 max=0.003388 Jy/beam ! Clean residual mean=0.000005 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.356069 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 222 components and 0.356069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085834Jy sigma=0.000659 ! Fit after self-cal, rms=0.085807Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085807Jy sigma=0.000659 ! Fit after self-cal, rms=0.084711Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=8.077 mas, bpa=-4.781 degrees ! Estimated noise=971.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249688 Jy ! Component: 100 - total flux cleaned = 0.00336287 Jy ! Component: 150 - total flux cleaned = 0.00345903 Jy ! Component: 200 - total flux cleaned = 0.00350081 Jy ! Total flux subtracted in 200 components = 0.00350081 Jy ! Clean residual min=-0.002678 max=0.002875 Jy/beam ! Clean residual mean=0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.35957 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 242 components and 0.35957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084626Jy sigma=0.000658 ! Fit after self-cal, rms=0.084614Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816053 Jy ! Component: 100 - total flux cleaned = 0.000775014 Jy ! Component: 150 - total flux cleaned = 0.000775108 Jy ! Component: 200 - total flux cleaned = 0.000810148 Jy ! Total flux subtracted in 200 components = 0.000810148 Jy ! Clean residual min=-0.002670 max=0.002623 Jy/beam ! Clean residual mean=0.000004 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.36038 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 253 components and 0.36038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084583Jy sigma=0.000657 ! Fit after self-cal, rms=0.084584Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084584Jy sigma=0.000657 ! Fit after self-cal, rms=0.083944Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=16.25 mas, bpa=-5.281 degrees ! Estimated noise=1284.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014475 Jy ! Component: 100 - total flux cleaned = 0.001951 Jy ! Component: 150 - total flux cleaned = 0.0023458 Jy ! Component: 200 - total flux cleaned = 0.00238677 Jy ! Total flux subtracted in 200 components = 0.00238677 Jy ! Clean residual min=-0.003077 max=0.003407 Jy/beam ! Clean residual mean=0.000001 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.362767 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 263 components and 0.362767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083929Jy sigma=0.000657 ! Fit after self-cal, rms=0.083926Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295779 Jy ! Component: 100 - total flux cleaned = 0.000369302 Jy ! Component: 150 - total flux cleaned = 0.000401194 Jy ! Component: 200 - total flux cleaned = 0.000400375 Jy ! Total flux subtracted in 200 components = 0.000400375 Jy ! Clean residual min=-0.003066 max=0.003082 Jy/beam ! Clean residual mean=0.000002 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.363167 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 277 components and 0.363167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083934Jy sigma=0.000657 ! Fit after self-cal, rms=0.083939Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=8.076 mas, bpa=-4.927 degrees ! Estimated noise=965.026 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 8.076 at -4.927 degrees (North through East) ! Clean map min=-0.0040749 max=0.12864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=6.993 mas, bpa=-4.516 degrees ! Estimated noise=1380.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102221 Jy ! Component: 100 - total flux cleaned = 0.164415 Jy ! Component: 150 - total flux cleaned = 0.207594 Jy ! Component: 200 - total flux cleaned = 0.239187 Jy ! Total flux subtracted in 200 components = 0.239187 Jy ! Clean residual min=-0.008443 max=0.018066 Jy/beam ! Clean residual mean=-0.000188 rms=0.003309 Jy/beam ! Combined flux in latest and established models = 0.239187 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.239187 Jy ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=8.076 mas, bpa=-4.927 degrees ! Estimated noise=965.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037055 Jy ! Component: 100 - total flux cleaned = 0.0611284 Jy ! Component: 150 - total flux cleaned = 0.0776007 Jy ! Component: 200 - total flux cleaned = 0.0894116 Jy ! Total flux subtracted in 200 components = 0.0894116 Jy ! Clean residual min=-0.004487 max=0.007096 Jy/beam ! Clean residual mean=-0.000056 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.328598 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 135 components and 0.328598 Jy ! Inverting map ! Added new window around map position (7.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086914 Jy ! Component: 100 - total flux cleaned = 0.0150929 Jy ! Component: 150 - total flux cleaned = 0.0198881 Jy ! Component: 200 - total flux cleaned = 0.0235296 Jy ! Total flux subtracted in 200 components = 0.0235296 Jy ! Clean residual min=-0.002830 max=0.002881 Jy/beam ! Clean residual mean=-0.000016 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.352128 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 184 components and 0.352128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=16.25 mas, bpa=-5.281 degrees ! Estimated noise=1284.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503995 Jy ! Component: 100 - total flux cleaned = 0.00742136 Jy ! Component: 150 - total flux cleaned = 0.00842331 Jy ! Component: 200 - total flux cleaned = 0.00916086 Jy ! Total flux subtracted in 200 components = 0.00916086 Jy ! Clean residual min=-0.002979 max=0.003094 Jy/beam ! Clean residual mean=-0.000008 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.361289 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659875 Jy ! Component: 100 - total flux cleaned = 0.00110278 Jy ! Component: 150 - total flux cleaned = 0.00150991 Jy ! Component: 200 - total flux cleaned = 0.00181668 Jy ! Total flux subtracted in 200 components = 0.00181668 Jy ! Clean residual min=-0.002932 max=0.002932 Jy/beam ! Clean residual mean=-0.000003 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.363105 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 256 components and 0.363106 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=8.076 mas, bpa=-4.927 degrees ! Estimated noise=965.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102235 Jy ! Component: 100 - total flux cleaned = 0.000278587 Jy ! Component: 150 - total flux cleaned = 0.000275725 Jy ! Component: 200 - total flux cleaned = 0.000275809 Jy ! Total flux subtracted in 200 components = 0.000275809 Jy ! Clean residual min=-0.002481 max=0.002113 Jy/beam ! Clean residual mean=-0.000000 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.363381 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 276 components and 0.363381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083890Jy sigma=0.000656 ! Fit after self-cal, rms=0.083859Jy sigma=0.000656 wmodel J0708-1421_S_2017_07_09_pus_map.mod ! Writing 276 model components to file: J0708-1421_S_2017_07_09_pus_map.mod wobs J0708-1421_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0708-1421_S_2017_07_09_pus_uvs.fits wwins J0708-1421_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J0708-1421_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874337 Jy ! Component: 100 - total flux cleaned = -0.00106877 Jy ! Component: 150 - total flux cleaned = -0.00117863 Jy ! Component: 200 - total flux cleaned = -0.00114339 Jy ! Component: 250 - total flux cleaned = -0.00107613 Jy ! Component: 300 - total flux cleaned = -0.00101024 Jy ! Component: 350 - total flux cleaned = -0.000851005 Jy ! Component: 400 - total flux cleaned = -0.00078912 Jy ! Component: 450 - total flux cleaned = -0.000668229 Jy ! Component: 500 - total flux cleaned = -0.000638698 Jy ! Component: 550 - total flux cleaned = -0.00055216 Jy ! Component: 600 - total flux cleaned = -0.00052483 Jy ! Component: 650 - total flux cleaned = -0.000497124 Jy ! Component: 700 - total flux cleaned = -0.000416406 Jy ! Component: 750 - total flux cleaned = -0.000285362 Jy ! Component: 800 - total flux cleaned = -0.000362149 Jy ! Component: 850 - total flux cleaned = -0.000336456 Jy ! Component: 900 - total flux cleaned = -0.000410552 Jy ! Component: 950 - total flux cleaned = -0.000458657 Jy ! Component: 1000 - total flux cleaned = -0.000529982 Jy ! Component: 1050 - total flux cleaned = -0.000717394 Jy ! Component: 1100 - total flux cleaned = -0.000671773 Jy ! Component: 1150 - total flux cleaned = -0.000876105 Jy ! Component: 1200 - total flux cleaned = -0.000875724 Jy ! Component: 1250 - total flux cleaned = -0.0008978 Jy ! Component: 1300 - total flux cleaned = -0.000919477 Jy ! Component: 1350 - total flux cleaned = -0.000941354 Jy ! Component: 1400 - total flux cleaned = -0.000983624 Jy ! Component: 1450 - total flux cleaned = -0.000942309 Jy ! Component: 1500 - total flux cleaned = -0.00106575 Jy ! Component: 1550 - total flux cleaned = -0.00104529 Jy ! Component: 1600 - total flux cleaned = -0.00110534 Jy ! Component: 1650 - total flux cleaned = -0.00116494 Jy ! Component: 1700 - total flux cleaned = -0.00114556 Jy ! Component: 1750 - total flux cleaned = -0.0011846 Jy ! Component: 1800 - total flux cleaned = -0.00118489 Jy ! Component: 1850 - total flux cleaned = -0.00124171 Jy ! Component: 1900 - total flux cleaned = -0.00126012 Jy ! Component: 1950 - total flux cleaned = -0.00127833 Jy ! Component: 2000 - total flux cleaned = -0.00126003 Jy ! Component: 2050 - total flux cleaned = -0.00129597 Jy ! Component: 2100 - total flux cleaned = -0.00133174 Jy ! Component: 2150 - total flux cleaned = -0.00134932 Jy ! Component: 2200 - total flux cleaned = -0.00138446 Jy ! Component: 2250 - total flux cleaned = -0.00141893 Jy ! Component: 2300 - total flux cleaned = -0.00141895 Jy ! Component: 2350 - total flux cleaned = -0.0015039 Jy ! Component: 2400 - total flux cleaned = -0.00150397 Jy ! Component: 2450 - total flux cleaned = -0.00155415 Jy ! Component: 2500 - total flux cleaned = -0.00155412 Jy ! Component: 2550 - total flux cleaned = -0.00158693 Jy ! Component: 2600 - total flux cleaned = -0.00160303 Jy ! Component: 2650 - total flux cleaned = -0.00157093 Jy ! Component: 2700 - total flux cleaned = -0.00165042 Jy ! Component: 2750 - total flux cleaned = -0.00166619 Jy ! Component: 2800 - total flux cleaned = -0.00174449 Jy ! Component: 2850 - total flux cleaned = -0.00174437 Jy ! Component: 2900 - total flux cleaned = -0.00179059 Jy ! Component: 2950 - total flux cleaned = -0.00183606 Jy ! Component: 3000 - total flux cleaned = -0.00194184 Jy ! Component: 3050 - total flux cleaned = -0.00195691 Jy ! Component: 3100 - total flux cleaned = -0.00201644 Jy ! Component: 3150 - total flux cleaned = -0.00209008 Jy ! Component: 3200 - total flux cleaned = -0.00217777 Jy ! Component: 3250 - total flux cleaned = -0.00226465 Jy ! Component: 3300 - total flux cleaned = -0.00232215 Jy ! Component: 3350 - total flux cleaned = -0.00236511 Jy ! Component: 3400 - total flux cleaned = -0.00242171 Jy ! Component: 3450 - total flux cleaned = -0.00249195 Jy ! Component: 3500 - total flux cleaned = -0.00250582 Jy ! Component: 3550 - total flux cleaned = -0.00257519 Jy ! Component: 3600 - total flux cleaned = -0.0026026 Jy ! Component: 3650 - total flux cleaned = -0.00264359 Jy ! Component: 3700 - total flux cleaned = -0.00273864 Jy ! Component: 3750 - total flux cleaned = -0.00276569 Jy ! Component: 3800 - total flux cleaned = -0.00284599 Jy ! Component: 3850 - total flux cleaned = -0.00289919 Jy ! Component: 3900 - total flux cleaned = -0.00291241 Jy ! Component: 3950 - total flux cleaned = -0.00299125 Jy ! Component: 4000 - total flux cleaned = -0.00303055 Jy ! Component: 4050 - total flux cleaned = -0.00309557 Jy ! Total flux subtracted in 4096 components = -0.00317299 Jy ! Clean residual min=-0.000828 max=0.000789 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.360208 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 551 components and 0.360208 Jy ![Exited script file: muppet] wmap "J0708-1421_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 8.076 at -4.927 degrees (North through East) ! Clean map min=-0.0028607 max=0.13158 Jy/beam ! Writing clean map to FITS file: J0708-1421_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13158 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229193 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.522555 0.522555 1.04511 2.09022 4.18044 8.36087 16.7217 33.4435 66.887 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 8.076 at -4.927 degrees (North through East) ! Clean map min=-0.0028607 max=0.13158 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0708-1421_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:44:08 2019