! Started logfile: J0707+3822_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:42 2019 obs J0707+3822_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0707+3822_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.531012 visibilities/baseline/integration-bin. ! Found source: J0707+3822 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0707+3822_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 491 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 641 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 987 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993159Jy sigma=0.009641 ! Fit after self-cal, rms=0.959062Jy sigma=0.009319 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=6.329 mas, bpa=-21.34 degrees ! Estimated noise=1365.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322906 Jy ! Component: 100 - total flux cleaned = 0.0401395 Jy ! Total flux subtracted in 100 components = 0.0401395 Jy ! Clean residual min=-0.003949 max=0.004105 Jy/beam ! Clean residual mean=0.000006 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.0401395 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0401395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075107Jy sigma=0.000638 ! Fit after self-cal, rms=0.074028Jy sigma=0.000628 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=7.105 mas, bpa=-20.61 degrees ! Estimated noise=849.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529621 Jy ! Component: 100 - total flux cleaned = 0.00776149 Jy ! Component: 150 - total flux cleaned = 0.00901036 Jy ! Component: 200 - total flux cleaned = 0.00940349 Jy ! Total flux subtracted in 200 components = 0.00940349 Jy ! Clean residual min=-0.002923 max=0.002681 Jy/beam ! Clean residual mean=-0.000003 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.049543 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.049543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073555Jy sigma=0.000625 ! Fit after self-cal, rms=0.073472Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.10 KP 1.01 ! LA 1.07 MK 1.04 NL 0.83 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.10 KP 0.91 ! LA 1.06 MK 1.05 NL 0.73 OV 1.00* ! PT 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.13 KP 0.89 ! LA 0.93 MK 1.09 NL 0.84 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.93 KP 1.00* ! LA 0.69 MK 0.86 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.073472Jy sigma=0.000625 ! Fit after self-cal, rms=0.069829Jy sigma=0.000624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.156 mas, bpa=-19.13 degrees ! Estimated noise=870.186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787551 Jy ! Component: 100 - total flux cleaned = 0.000918365 Jy ! Component: 150 - total flux cleaned = 0.000918214 Jy ! Component: 200 - total flux cleaned = 0.00093331 Jy ! Total flux subtracted in 200 components = 0.00093331 Jy ! Clean residual min=-0.002062 max=0.002287 Jy/beam ! Clean residual mean=-0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0504763 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0504763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069812Jy sigma=0.000624 ! Fit after self-cal, rms=0.069623Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069623Jy sigma=0.000623 ! Fit after self-cal, rms=0.068442Jy sigma=0.000622 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=7.135 mas, bpa=-19.06 degrees ! Estimated noise=867.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597256 Jy ! Component: 100 - total flux cleaned = 0.000741246 Jy ! Component: 150 - total flux cleaned = 0.000853105 Jy ! Component: 200 - total flux cleaned = 0.000920904 Jy ! Total flux subtracted in 200 components = 0.000920904 Jy ! Clean residual min=-0.001730 max=0.002046 Jy/beam ! Clean residual mean=-0.000002 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0513972 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0513972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068432Jy sigma=0.000622 ! Fit after self-cal, rms=0.068434Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (74, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154276 Jy ! Component: 100 - total flux cleaned = 0.00158138 Jy ! Component: 150 - total flux cleaned = 0.0016402 Jy ! Component: 200 - total flux cleaned = 0.00174309 Jy ! Total flux subtracted in 200 components = 0.00174309 Jy ! Clean residual min=-0.001496 max=0.001718 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0531403 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.0531403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068382Jy sigma=0.000622 ! Fit after self-cal, rms=0.068352Jy sigma=0.000621 ! Inverting map ! Added new window around map position (3, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163297 Jy ! Component: 100 - total flux cleaned = 0.00199719 Jy ! Component: 150 - total flux cleaned = 0.00222002 Jy ! Component: 200 - total flux cleaned = 0.00230396 Jy ! Total flux subtracted in 200 components = 0.00230396 Jy ! Clean residual min=-0.001448 max=0.001467 Jy/beam ! Clean residual mean=-0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0554443 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 0.0554443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068300Jy sigma=0.000621 ! Fit after self-cal, rms=0.068268Jy sigma=0.000621 ! Inverting map ! Added new window around map position (-4, 90). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159835 Jy ! Component: 100 - total flux cleaned = 0.0023478 Jy ! Component: 150 - total flux cleaned = 0.0028664 Jy ! Component: 200 - total flux cleaned = 0.00328985 Jy ! Total flux subtracted in 200 components = 0.00328985 Jy ! Clean residual min=-0.001420 max=0.001534 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0587341 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.0587341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068216Jy sigma=0.000620 ! Fit after self-cal, rms=0.068202Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068202Jy sigma=0.000620 ! Fit after self-cal, rms=0.068270Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.158 mas, bpa=-18.96 degrees ! Estimated noise=866.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128025 Jy ! Component: 100 - total flux cleaned = 0.00184378 Jy ! Component: 150 - total flux cleaned = 0.00211127 Jy ! Component: 200 - total flux cleaned = 0.00234809 Jy ! Total flux subtracted in 200 components = 0.00234809 Jy ! Clean residual min=-0.001297 max=0.001453 Jy/beam ! Clean residual mean=0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0610822 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 105 components and 0.0610822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068233Jy sigma=0.000620 ! Fit after self-cal, rms=0.068242Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950273 Jy ! Component: 100 - total flux cleaned = 0.00143172 Jy ! Component: 150 - total flux cleaned = 0.00166369 Jy ! Component: 200 - total flux cleaned = 0.00185435 Jy ! Total flux subtracted in 200 components = 0.00185435 Jy ! Clean residual min=-0.001356 max=0.001428 Jy/beam ! Clean residual mean=0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0629366 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 114 components and 0.0629366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068217Jy sigma=0.000619 ! Fit after self-cal, rms=0.068215Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068215Jy sigma=0.000619 ! Fit after self-cal, rms=0.068682Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=9.505 mas, bpa=-21.87 degrees ! Estimated noise=1092.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584474 Jy ! Component: 100 - total flux cleaned = 0.000729802 Jy ! Component: 150 - total flux cleaned = 0.000731906 Jy ! Component: 200 - total flux cleaned = 0.000753072 Jy ! Total flux subtracted in 200 components = 0.000753072 Jy ! Clean residual min=-0.001280 max=0.001416 Jy/beam ! Clean residual mean=0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0636896 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 0.0636896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068663Jy sigma=0.000619 ! Fit after self-cal, rms=0.068645Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202102 Jy ! Component: 100 - total flux cleaned = 0.000226472 Jy ! Component: 150 - total flux cleaned = 0.000294712 Jy ! Component: 200 - total flux cleaned = 0.000357538 Jy ! Total flux subtracted in 200 components = 0.000357538 Jy ! Clean residual min=-0.001302 max=0.001527 Jy/beam ! Clean residual mean=0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0640472 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 153 components and 0.0640472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068632Jy sigma=0.000619 ! Fit after self-cal, rms=0.068623Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.178 mas, bpa=-19.03 degrees ! Estimated noise=869.507 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.178 at -19.03 degrees (North through East) ! Clean map min=-0.0021406 max=0.043243 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=6.516 mas, bpa=-18.32 degrees ! Estimated noise=1396.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327186 Jy ! Component: 100 - total flux cleaned = 0.0414385 Jy ! Component: 150 - total flux cleaned = 0.0468602 Jy ! Component: 200 - total flux cleaned = 0.0501538 Jy ! Total flux subtracted in 200 components = 0.0501538 Jy ! Clean residual min=-0.003504 max=0.003326 Jy/beam ! Clean residual mean=0.000005 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0501538 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0501538 Jy ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.178 mas, bpa=-19.03 degrees ! Estimated noise=869.507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371446 Jy ! Component: 100 - total flux cleaned = 0.00578498 Jy ! Component: 150 - total flux cleaned = 0.00750195 Jy ! Component: 200 - total flux cleaned = 0.00871863 Jy ! Total flux subtracted in 200 components = 0.00871863 Jy ! Clean residual min=-0.001875 max=0.002257 Jy/beam ! Clean residual mean=0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0588725 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.0588725 Jy ! Inverting map ! Added new window around map position (37.5, -77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206402 Jy ! Component: 100 - total flux cleaned = 0.00308906 Jy ! Component: 150 - total flux cleaned = 0.00371149 Jy ! Component: 200 - total flux cleaned = 0.00421575 Jy ! Total flux subtracted in 200 components = 0.00421575 Jy ! Clean residual min=-0.001696 max=0.001538 Jy/beam ! Clean residual mean=0.000003 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0630882 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 73 components and 0.0630882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=9.505 mas, bpa=-21.87 degrees ! Estimated noise=1092.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518256 Jy ! Component: 100 - total flux cleaned = 0.000727155 Jy ! Component: 150 - total flux cleaned = 0.000941266 Jy ! Component: 200 - total flux cleaned = 0.00116298 Jy ! Total flux subtracted in 200 components = 0.00116298 Jy ! Clean residual min=-0.001307 max=0.001394 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0642512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144652 Jy ! Component: 100 - total flux cleaned = 0.000305846 Jy ! Component: 150 - total flux cleaned = 0.000405559 Jy ! Component: 200 - total flux cleaned = 0.000475398 Jy ! Total flux subtracted in 200 components = 0.000475398 Jy ! Clean residual min=-0.001181 max=0.001373 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0647266 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 121 components and 0.0647266 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.178 mas, bpa=-19.03 degrees ! Estimated noise=869.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.76507e-05 Jy ! Component: 100 - total flux cleaned = 4.0788e-05 Jy ! Component: 150 - total flux cleaned = 0.00017448 Jy ! Component: 200 - total flux cleaned = 0.000274993 Jy ! Total flux subtracted in 200 components = 0.000274993 Jy ! Clean residual min=-0.001374 max=0.001305 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0650016 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.0650016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068581Jy sigma=0.000618 ! Fit after self-cal, rms=0.068557Jy sigma=0.000618 wmodel J0707+3822_S_2017_10_09_pus_map.mod ! Writing 149 model components to file: J0707+3822_S_2017_10_09_pus_map.mod wobs J0707+3822_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0707+3822_S_2017_10_09_pus_uvs.fits wwins J0707+3822_S_2017_10_09_pus_map.win ! wwins: Wrote 5 windows to J0707+3822_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174637 Jy ! Component: 100 - total flux cleaned = -0.000127542 Jy ! Component: 150 - total flux cleaned = -0.000106217 Jy ! Component: 200 - total flux cleaned = 2.49274e-06 Jy ! Component: 250 - total flux cleaned = 0.000148565 Jy ! Component: 300 - total flux cleaned = 0.000288651 Jy ! Component: 350 - total flux cleaned = 0.000404003 Jy ! Component: 400 - total flux cleaned = 0.000441229 Jy ! Component: 450 - total flux cleaned = 0.00049618 Jy ! Component: 500 - total flux cleaned = 0.000602432 Jy ! Component: 550 - total flux cleaned = 0.000636311 Jy ! Component: 600 - total flux cleaned = 0.00058554 Jy ! Component: 650 - total flux cleaned = 0.000585649 Jy ! Component: 700 - total flux cleaned = 0.00055356 Jy ! Component: 750 - total flux cleaned = 0.000537719 Jy ! Component: 800 - total flux cleaned = 0.000476469 Jy ! Component: 850 - total flux cleaned = 0.000491821 Jy ! Component: 900 - total flux cleaned = 0.000506651 Jy ! Component: 950 - total flux cleaned = 0.000521117 Jy ! Component: 1000 - total flux cleaned = 0.000507133 Jy ! Component: 1050 - total flux cleaned = 0.000577363 Jy ! Component: 1100 - total flux cleaned = 0.000618574 Jy ! Component: 1150 - total flux cleaned = 0.000618617 Jy ! Component: 1200 - total flux cleaned = 0.000605234 Jy ! Component: 1250 - total flux cleaned = 0.000618281 Jy ! Component: 1300 - total flux cleaned = 0.000605142 Jy ! Component: 1350 - total flux cleaned = 0.000605237 Jy ! Component: 1400 - total flux cleaned = 0.00059262 Jy ! Component: 1450 - total flux cleaned = 0.000555591 Jy ! Component: 1500 - total flux cleaned = 0.000556012 Jy ! Component: 1550 - total flux cleaned = 0.000556057 Jy ! Component: 1600 - total flux cleaned = 0.000579718 Jy ! Component: 1650 - total flux cleaned = 0.000579591 Jy ! Component: 1700 - total flux cleaned = 0.000579503 Jy ! Component: 1750 - total flux cleaned = 0.000590851 Jy ! Component: 1800 - total flux cleaned = 0.000590937 Jy ! Component: 1850 - total flux cleaned = 0.000613261 Jy ! Component: 1900 - total flux cleaned = 0.000613173 Jy ! Component: 1950 - total flux cleaned = 0.000602274 Jy ! Component: 2000 - total flux cleaned = 0.000613019 Jy ! Component: 2050 - total flux cleaned = 0.000634279 Jy ! Component: 2100 - total flux cleaned = 0.00065529 Jy ! Component: 2150 - total flux cleaned = 0.000665618 Jy ! Component: 2200 - total flux cleaned = 0.000696743 Jy ! Component: 2250 - total flux cleaned = 0.00076861 Jy ! Component: 2300 - total flux cleaned = 0.000799133 Jy ! Component: 2350 - total flux cleaned = 0.0008596 Jy ! Component: 2400 - total flux cleaned = 0.000899462 Jy ! Component: 2450 - total flux cleaned = 0.000919261 Jy ! Component: 2500 - total flux cleaned = 0.000987834 Jy ! Component: 2550 - total flux cleaned = 0.00099756 Jy ! Component: 2600 - total flux cleaned = 0.00104573 Jy ! Component: 2650 - total flux cleaned = 0.00107438 Jy ! Component: 2700 - total flux cleaned = 0.00110295 Jy ! Component: 2750 - total flux cleaned = 0.00115958 Jy ! Component: 2800 - total flux cleaned = 0.00122508 Jy ! Component: 2850 - total flux cleaned = 0.00125302 Jy ! Component: 2900 - total flux cleaned = 0.00132676 Jy ! Component: 2950 - total flux cleaned = 0.00135425 Jy ! Component: 3000 - total flux cleaned = 0.00139073 Jy ! Component: 3050 - total flux cleaned = 0.00149936 Jy ! Component: 3100 - total flux cleaned = 0.00150832 Jy ! Component: 3150 - total flux cleaned = 0.00157983 Jy ! Component: 3200 - total flux cleaned = 0.00164198 Jy ! Component: 3250 - total flux cleaned = 0.00165963 Jy ! Component: 3300 - total flux cleaned = 0.00176477 Jy ! Component: 3350 - total flux cleaned = 0.0017735 Jy ! Component: 3400 - total flux cleaned = 0.00183415 Jy ! Component: 3450 - total flux cleaned = 0.00186859 Jy ! Component: 3500 - total flux cleaned = 0.00191142 Jy ! Component: 3550 - total flux cleaned = 0.00196242 Jy ! Component: 3600 - total flux cleaned = 0.00198783 Jy ! Component: 3650 - total flux cleaned = 0.00206358 Jy ! Component: 3700 - total flux cleaned = 0.00208871 Jy ! Component: 3750 - total flux cleaned = 0.00215529 Jy ! Component: 3800 - total flux cleaned = 0.00221328 Jy ! Component: 3850 - total flux cleaned = 0.00223803 Jy ! Component: 3900 - total flux cleaned = 0.00227904 Jy ! Component: 3950 - total flux cleaned = 0.00232805 Jy ! Component: 4000 - total flux cleaned = 0.00236869 Jy ! Component: 4050 - total flux cleaned = 0.00240102 Jy ! Total flux subtracted in 4096 components = 0.00244938 Jy ! Clean residual min=-0.000543 max=0.000518 Jy/beam ! Clean residual mean=-0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.067451 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 392 components and 0.0674509 Jy ![Exited script file: muppet] wmap "J0707+3822_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.178 at -19.03 degrees (North through East) ! Clean map min=-0.0018075 max=0.043093 Jy/beam ! Writing clean map to FITS file: J0707+3822_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0430935 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136614 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951051 0.951051 1.9021 3.80421 7.60841 15.2168 30.4336 60.8673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.597 x 7.178 at -19.03 degrees (North through East) ! Clean map min=-0.0018075 max=0.043093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0707+3822_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:48 2019