! Started logfile: J0707+3822_S_2017_05_27_pus_uvs.log on Fri May 3 10:59:47 2019 obs J0707+3822_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0707+3822_S_2017_05_27_pus_uva.fits ! AN table 1: 229 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983018 visibilities/baseline/integration-bin. ! Found source: J0707+3822 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 40520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0707+3822_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1251 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999941Jy sigma=0.019815 ! Fit after self-cal, rms=0.962352Jy sigma=0.019665 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=4.782 mas, bpa=7.36 degrees ! Estimated noise=898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275435 Jy ! Component: 100 - total flux cleaned = 0.0343278 Jy ! Total flux subtracted in 100 components = 0.0343278 Jy ! Clean residual min=-0.005134 max=0.005378 Jy/beam ! Clean residual mean=0.000003 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.0343278 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0343278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085370Jy sigma=0.000874 ! Fit after self-cal, rms=0.084026Jy sigma=0.000843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=5.794 mas, bpa=6.442 degrees ! Estimated noise=422.132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450315 Jy ! Component: 100 - total flux cleaned = 0.00583568 Jy ! Component: 150 - total flux cleaned = 0.00626801 Jy ! Component: 200 - total flux cleaned = 0.00648753 Jy ! Total flux subtracted in 200 components = 0.00648753 Jy ! Clean residual min=-0.003871 max=0.003951 Jy/beam ! Clean residual mean=0.000000 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0408153 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 25 components and 0.0408153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083530Jy sigma=0.000873 ! Fit after self-cal, rms=0.083506Jy sigma=0.000873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.91 HN 1.04 KP 0.90 ! LA 0.93 MK 0.78 NL 0.91 OV 1.02 ! PT 1.01 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 11.63 FD 0.96 HN 1.16 KP 0.93 ! LA 0.90 MK 0.89 NL 1.04 OV 0.99 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.99 HN 1.04 KP 0.91 ! LA 0.97 MK 0.93 NL 0.98 OV 0.93 ! PT 0.96 SC 0.91 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.85 KP 1.00* ! LA 0.85 MK 0.71 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.083506Jy sigma=0.000873 ! Fit after self-cal, rms=0.198003Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=6.068 mas, bpa=2.012 degrees ! Estimated noise=434.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169964 Jy ! Component: 100 - total flux cleaned = 0.00187604 Jy ! Component: 150 - total flux cleaned = 0.00184071 Jy ! Component: 200 - total flux cleaned = 0.0017789 Jy ! Total flux subtracted in 200 components = 0.0017789 Jy ! Clean residual min=-0.001973 max=0.001337 Jy/beam ! Clean residual mean=0.000004 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0425942 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0425942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197842Jy sigma=0.000649 ! Fit after self-cal, rms=0.198521Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198521Jy sigma=0.000646 ! Fit after self-cal, rms=0.247563Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=6.023 mas, bpa=2.32 degrees ! Estimated noise=436.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110526 Jy ! Component: 100 - total flux cleaned = 0.00121238 Jy ! Component: 150 - total flux cleaned = 0.00121267 Jy ! Component: 200 - total flux cleaned = 0.00121392 Jy ! Total flux subtracted in 200 components = 0.00121392 Jy ! Clean residual min=-0.001307 max=0.001240 Jy/beam ! Clean residual mean=-0.000003 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0438081 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0438081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247476Jy sigma=0.000644 ! Fit after self-cal, rms=0.247516Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.26151e-06 Jy ! Component: 100 - total flux cleaned = 3.46356e-06 Jy ! Component: 150 - total flux cleaned = -1.258e-05 Jy ! Component: 200 - total flux cleaned = -3.89677e-05 Jy ! Total flux subtracted in 200 components = -3.89677e-05 Jy ! Clean residual min=-0.001339 max=0.001248 Jy/beam ! Clean residual mean=-0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0437692 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0437692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247481Jy sigma=0.000644 ! Fit after self-cal, rms=0.247480Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247480Jy sigma=0.000644 ! Fit after self-cal, rms=0.194796Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=6.038 mas, bpa=2.246 degrees ! Estimated noise=438.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623897 Jy ! Component: 100 - total flux cleaned = 0.00071546 Jy ! Component: 150 - total flux cleaned = 0.000784688 Jy ! Component: 200 - total flux cleaned = 0.000784827 Jy ! Total flux subtracted in 200 components = 0.000784827 Jy ! Clean residual min=-0.001186 max=0.001140 Jy/beam ! Clean residual mean=-0.000003 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.044554 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.044554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194767Jy sigma=0.000642 ! Fit after self-cal, rms=0.194759Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010107 Jy ! Component: 100 - total flux cleaned = 0.000101998 Jy ! Component: 150 - total flux cleaned = 0.000102125 Jy ! Component: 200 - total flux cleaned = 7.72318e-05 Jy ! Total flux subtracted in 200 components = 7.72318e-05 Jy ! Clean residual min=-0.001245 max=0.001172 Jy/beam ! Clean residual mean=-0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.0446312 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0446312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194743Jy sigma=0.000642 ! Fit after self-cal, rms=0.194745Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194745Jy sigma=0.000642 ! Fit after self-cal, rms=0.206400Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=9.612 mas, bpa=2.337 degrees ! Estimated noise=553.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812055 Jy ! Component: 100 - total flux cleaned = 0.00091671 Jy ! Component: 150 - total flux cleaned = 0.000935199 Jy ! Component: 200 - total flux cleaned = 0.000935535 Jy ! Total flux subtracted in 200 components = 0.000935535 Jy ! Clean residual min=-0.001285 max=0.001319 Jy/beam ! Clean residual mean=-0.000006 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0455668 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.0455668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206374Jy sigma=0.000642 ! Fit after self-cal, rms=0.206368Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104231 Jy ! Component: 100 - total flux cleaned = 9.50829e-05 Jy ! Component: 150 - total flux cleaned = 7.01658e-05 Jy ! Component: 200 - total flux cleaned = 4.92951e-05 Jy ! Total flux subtracted in 200 components = 4.92951e-05 Jy ! Clean residual min=-0.001321 max=0.001260 Jy/beam ! Clean residual mean=-0.000006 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0456161 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.0456161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206357Jy sigma=0.000642 ! Fit after self-cal, rms=0.206355Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=6.047 mas, bpa=2.025 degrees ! Estimated noise=440.517 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 6.047 at 2.025 degrees (North through East) ! Clean map min=-0.0011647 max=0.040109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=5.134 mas, bpa=1.424 degrees ! Estimated noise=915.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305472 Jy ! Component: 100 - total flux cleaned = 0.037887 Jy ! Component: 150 - total flux cleaned = 0.0413086 Jy ! Component: 200 - total flux cleaned = 0.0434046 Jy ! Total flux subtracted in 200 components = 0.0434046 Jy ! Clean residual min=-0.002119 max=0.002225 Jy/beam ! Clean residual mean=-0.000001 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0434046 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0434046 Jy ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=6.047 mas, bpa=2.025 degrees ! Estimated noise=440.517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163234 Jy ! Component: 100 - total flux cleaned = 0.0019188 Jy ! Component: 150 - total flux cleaned = 0.00198299 Jy ! Component: 200 - total flux cleaned = 0.00201098 Jy ! Total flux subtracted in 200 components = 0.00201098 Jy ! Clean residual min=-0.001213 max=0.001146 Jy/beam ! Clean residual mean=-0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.0454156 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.0454156 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=9.612 mas, bpa=2.337 degrees ! Estimated noise=553.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240176 Jy ! Component: 100 - total flux cleaned = 0.000271891 Jy ! Component: 150 - total flux cleaned = 0.000285173 Jy ! Component: 200 - total flux cleaned = 0.000294941 Jy ! Total flux subtracted in 200 components = 0.000294941 Jy ! Clean residual min=-0.001234 max=0.001283 Jy/beam ! Clean residual mean=-0.000006 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0457105 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.81994e-06 Jy ! Component: 100 - total flux cleaned = 1.75627e-05 Jy ! Component: 150 - total flux cleaned = 2.51917e-05 Jy ! Component: 200 - total flux cleaned = 3.22116e-05 Jy ! Total flux subtracted in 200 components = 3.22116e-05 Jy ! Clean residual min=-0.001229 max=0.001271 Jy/beam ! Clean residual mean=-0.000006 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0457427 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 0.0457427 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=6.047 mas, bpa=2.025 degrees ! Estimated noise=440.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140484 Jy ! Component: 100 - total flux cleaned = -0.000156642 Jy ! Component: 150 - total flux cleaned = -0.000172096 Jy ! Component: 200 - total flux cleaned = -0.000171829 Jy ! Total flux subtracted in 200 components = -0.000171829 Jy ! Clean residual min=-0.001171 max=0.001171 Jy/beam ! Clean residual mean=-0.000003 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0455709 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.0455709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206312Jy sigma=0.000641 ! Fit after self-cal, rms=0.206317Jy sigma=0.000641 wmodel J0707+3822_S_2017_05_27_pus_map.mod ! Writing 90 model components to file: J0707+3822_S_2017_05_27_pus_map.mod wobs J0707+3822_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0707+3822_S_2017_05_27_pus_uvs.fits wwins J0707+3822_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0707+3822_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178255 Jy ! Component: 100 - total flux cleaned = 9.89002e-05 Jy ! Component: 150 - total flux cleaned = -3.32542e-05 Jy ! Component: 200 - total flux cleaned = -8.80935e-05 Jy ! Component: 250 - total flux cleaned = -0.000194239 Jy ! Component: 300 - total flux cleaned = -0.000263144 Jy ! Component: 350 - total flux cleaned = -0.000280263 Jy ! Component: 400 - total flux cleaned = -0.000361907 Jy ! Component: 450 - total flux cleaned = -0.00039365 Jy ! Component: 500 - total flux cleaned = -0.00039347 Jy ! Component: 550 - total flux cleaned = -0.000424294 Jy ! Component: 600 - total flux cleaned = -0.000363395 Jy ! Component: 650 - total flux cleaned = -0.000333334 Jy ! Component: 700 - total flux cleaned = -0.00028912 Jy ! Component: 750 - total flux cleaned = -0.000245247 Jy ! Component: 800 - total flux cleaned = -0.000202141 Jy ! Component: 850 - total flux cleaned = -0.00011776 Jy ! Component: 900 - total flux cleaned = -0.000117378 Jy ! Component: 950 - total flux cleaned = -3.47929e-05 Jy ! Component: 1000 - total flux cleaned = 5.96417e-06 Jy ! Component: 1050 - total flux cleaned = 1.9539e-05 Jy ! Component: 1100 - total flux cleaned = 8.56975e-05 Jy ! Component: 1150 - total flux cleaned = 9.86591e-05 Jy ! Component: 1200 - total flux cleaned = 9.88235e-05 Jy ! Component: 1250 - total flux cleaned = 0.000124522 Jy ! Component: 1300 - total flux cleaned = 0.000137211 Jy ! Component: 1350 - total flux cleaned = 0.000137091 Jy ! Component: 1400 - total flux cleaned = 0.000149444 Jy ! Component: 1450 - total flux cleaned = 0.000112629 Jy ! Component: 1500 - total flux cleaned = 0.000100538 Jy ! Component: 1550 - total flux cleaned = 0.00010066 Jy ! Component: 1600 - total flux cleaned = 0.000100647 Jy ! Component: 1650 - total flux cleaned = 8.8695e-05 Jy ! Component: 1700 - total flux cleaned = 5.36507e-05 Jy ! Component: 1750 - total flux cleaned = 1.89116e-05 Jy ! Component: 1800 - total flux cleaned = -1.55081e-05 Jy ! Component: 1850 - total flux cleaned = -3.82949e-05 Jy ! Component: 1900 - total flux cleaned = -9.4363e-05 Jy ! Component: 1950 - total flux cleaned = -9.4341e-05 Jy ! Component: 2000 - total flux cleaned = -0.000127597 Jy ! Component: 2050 - total flux cleaned = -0.000182262 Jy ! Component: 2100 - total flux cleaned = -0.000204093 Jy ! Component: 2150 - total flux cleaned = -0.000225671 Jy ! Component: 2200 - total flux cleaned = -0.000289656 Jy ! Component: 2250 - total flux cleaned = -0.000310837 Jy ! Component: 2300 - total flux cleaned = -0.000342295 Jy ! Component: 2350 - total flux cleaned = -0.000352597 Jy ! Component: 2400 - total flux cleaned = -0.000404477 Jy ! Component: 2450 - total flux cleaned = -0.000394219 Jy ! Component: 2500 - total flux cleaned = -0.000465578 Jy ! Component: 2550 - total flux cleaned = -0.000505994 Jy ! Component: 2600 - total flux cleaned = -0.000596242 Jy ! Component: 2650 - total flux cleaned = -0.00061617 Jy ! Component: 2700 - total flux cleaned = -0.000675458 Jy ! Component: 2750 - total flux cleaned = -0.000714789 Jy ! Component: 2800 - total flux cleaned = -0.000763495 Jy ! Component: 2850 - total flux cleaned = -0.000802153 Jy ! Component: 2900 - total flux cleaned = -0.000850159 Jy ! Component: 2950 - total flux cleaned = -0.000907373 Jy ! Component: 3000 - total flux cleaned = -0.000945157 Jy ! Component: 3050 - total flux cleaned = -0.00095462 Jy ! Component: 3100 - total flux cleaned = -0.00102943 Jy ! Component: 3150 - total flux cleaned = -0.00104789 Jy ! Component: 3200 - total flux cleaned = -0.00109392 Jy ! Component: 3250 - total flux cleaned = -0.00117624 Jy ! Component: 3300 - total flux cleaned = -0.00119433 Jy ! Component: 3350 - total flux cleaned = -0.00125758 Jy ! Component: 3400 - total flux cleaned = -0.00127553 Jy ! Component: 3450 - total flux cleaned = -0.00130231 Jy ! Component: 3500 - total flux cleaned = -0.00134658 Jy ! Component: 3550 - total flux cleaned = -0.00142569 Jy ! Component: 3600 - total flux cleaned = -0.00145188 Jy ! Component: 3650 - total flux cleaned = -0.00146924 Jy ! Component: 3700 - total flux cleaned = -0.00152954 Jy ! Component: 3750 - total flux cleaned = -0.00156381 Jy ! Component: 3800 - total flux cleaned = -0.00157236 Jy ! Component: 3850 - total flux cleaned = -0.00160621 Jy ! Component: 3900 - total flux cleaned = -0.00162304 Jy ! Component: 3950 - total flux cleaned = -0.0016816 Jy ! Component: 4000 - total flux cleaned = -0.00172315 Jy ! Component: 4050 - total flux cleaned = -0.00173966 Jy ! Total flux subtracted in 4096 components = -0.00173965 Jy ! Clean residual min=-0.000583 max=0.000479 Jy/beam ! Clean residual mean=-0.000000 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0438312 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 398 components and 0.0438312 Jy ![Exited script file: muppet] wmap "J0707+3822_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 6.047 at 2.025 degrees (North through East) ! Clean map min=-0.00096639 max=0.040104 Jy/beam ! Writing clean map to FITS file: J0707+3822_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0401037 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153711 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14985 1.14985 2.29971 4.59942 9.19883 18.3977 36.7953 73.5907 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.599 x 6.047 at 2.025 degrees (North through East) ! Clean map min=-0.00096639 max=0.040104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0707+3822_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:59:53 2019