! Started logfile: J0706-4122_S_2017_09_26_pus_uvs.log on Sat May 11 12:56:30 2019 obs J0706-4122_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0706-4122_S_2017_09_26_pus_uva.fits ! AN table 1: 147 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.1661 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0706-4122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 3516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0706-4122_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1056 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930680Jy sigma=0.005119 ! Fit after self-cal, rms=0.888767Jy sigma=0.004925 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.01 mas, bmaj=227.8 mas, bpa=-20.99 degrees ! Estimated noise=3333.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0947657 Jy ! Component: 100 - total flux cleaned = 0.118925 Jy ! Total flux subtracted in 100 components = 0.118925 Jy ! Clean residual min=-0.012264 max=0.012416 Jy/beam ! Clean residual mean=-0.000046 rms=0.004817 Jy/beam ! Combined flux in latest and established models = 0.118925 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.118925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109124Jy sigma=0.000583 ! Fit after self-cal, rms=0.108899Jy sigma=0.000581 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=16.32 mas, bmaj=219.5 mas, bpa=-21.42 degrees ! Estimated noise=2389.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149211 Jy ! Component: 100 - total flux cleaned = 0.0223525 Jy ! Component: 150 - total flux cleaned = 0.0226905 Jy ! Component: 200 - total flux cleaned = 0.0223621 Jy ! Total flux subtracted in 200 components = 0.0223621 Jy ! Clean residual min=-0.005578 max=0.005657 Jy/beam ! Clean residual mean=-0.000036 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 0.141287 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 55 components and 0.141287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107256Jy sigma=0.000571 ! Fit after self-cal, rms=0.106413Jy sigma=0.000566 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.06 ! LA 1.02 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.99 MK 1.00* NL 1.00* OV 1.06 ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.89 ! LA 0.96 MK 1.00* NL 1.00* OV 0.95 ! PT 1.01 ! ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.106413Jy sigma=0.000566 ! Fit after self-cal, rms=0.100964Jy sigma=0.000570 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=16.52 mas, bmaj=212.5 mas, bpa=-21.59 degrees ! Estimated noise=2417.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171405 Jy ! Component: 100 - total flux cleaned = 0.0018795 Jy ! Component: 150 - total flux cleaned = 0.00193087 Jy ! Component: 200 - total flux cleaned = 0.00197047 Jy ! Total flux subtracted in 200 components = 0.00197047 Jy ! Clean residual min=-0.000657 max=0.000661 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.143258 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 127 components and 0.143258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100659Jy sigma=0.000568 ! Fit after self-cal, rms=0.100562Jy sigma=0.000567 ! Inverting map ! Added new window around map position (0, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011498 Jy ! Component: 100 - total flux cleaned = 0.00239719 Jy ! Component: 150 - total flux cleaned = 0.00325593 Jy ! Component: 200 - total flux cleaned = 0.00371666 Jy ! Total flux subtracted in 200 components = 0.00371666 Jy ! Clean residual min=-0.000859 max=0.000720 Jy/beam ! Clean residual mean=0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.146975 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 188 components and 0.146975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100470Jy sigma=0.000567 ! Fit after self-cal, rms=0.100403Jy sigma=0.000566 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100403Jy sigma=0.000566 ! Fit after self-cal, rms=0.100485Jy sigma=0.000566 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.55 mas, bmaj=212.5 mas, bpa=-21.6 degrees ! Estimated noise=2414.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149078 Jy ! Component: 100 - total flux cleaned = 0.000736576 Jy ! Component: 150 - total flux cleaned = 0.00118329 Jy ! Component: 200 - total flux cleaned = 0.00128182 Jy ! Total flux subtracted in 200 components = 0.00128182 Jy ! Clean residual min=-0.000572 max=0.000634 Jy/beam ! Clean residual mean=0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.148257 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 236 components and 0.148256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100445Jy sigma=0.000566 ! Fit after self-cal, rms=0.100434Jy sigma=0.000566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502892 Jy ! Component: 100 - total flux cleaned = -0.000637844 Jy ! Component: 150 - total flux cleaned = -0.000921258 Jy ! Component: 200 - total flux cleaned = -0.00102368 Jy ! Total flux subtracted in 200 components = -0.00102368 Jy ! Clean residual min=-0.000495 max=0.000597 Jy/beam ! Clean residual mean=0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.147233 Jy ! Performing phase self-cal ! Adding 104 model components to the UV plane model. ! The established model now contains 335 components and 0.147233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100396Jy sigma=0.000566 ! Fit after self-cal, rms=0.100372Jy sigma=0.000566 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100372Jy sigma=0.000566 ! Fit after self-cal, rms=0.100412Jy sigma=0.000566 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.55 mas, bmaj=212.5 mas, bpa=-21.6 degrees ! Estimated noise=2414.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559824 Jy ! Component: 100 - total flux cleaned = 0.00128659 Jy ! Component: 150 - total flux cleaned = 0.00157618 Jy ! Component: 200 - total flux cleaned = 0.00171097 Jy ! Total flux subtracted in 200 components = 0.00171097 Jy ! Clean residual min=-0.000563 max=0.000562 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.148944 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 376 components and 0.148944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100392Jy sigma=0.000566 ! Fit after self-cal, rms=0.100385Jy sigma=0.000566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213987 Jy ! Component: 100 - total flux cleaned = -0.000156878 Jy ! Component: 150 - total flux cleaned = 2.87249e-05 Jy ! Component: 200 - total flux cleaned = 0.000137543 Jy ! Total flux subtracted in 200 components = 0.000137543 Jy ! Clean residual min=-0.000387 max=0.000437 Jy/beam ! Clean residual mean=0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.149081 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 448 components and 0.149081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100376Jy sigma=0.000565 ! Fit after self-cal, rms=0.100365Jy sigma=0.000565 ! Inverting map ! Added new window around map position (-123, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503722 Jy ! Component: 100 - total flux cleaned = 0.000708608 Jy ! Component: 150 - total flux cleaned = 0.000817261 Jy ! Component: 200 - total flux cleaned = 0.000889109 Jy ! Total flux subtracted in 200 components = 0.000889109 Jy ! Clean residual min=-0.000445 max=0.000414 Jy/beam ! Clean residual mean=-0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.14997 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 506 components and 0.14997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100357Jy sigma=0.000565 ! Fit after self-cal, rms=0.100350Jy sigma=0.000565 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100350Jy sigma=0.000565 ! Fit after self-cal, rms=0.100366Jy sigma=0.000565 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.88 mas, bmaj=211 mas, bpa=-21.64 degrees ! Estimated noise=2412.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159622 Jy ! Component: 100 - total flux cleaned = 0.000281716 Jy ! Component: 150 - total flux cleaned = 0.000460508 Jy ! Component: 200 - total flux cleaned = 0.000540888 Jy ! Total flux subtracted in 200 components = 0.000540888 Jy ! Clean residual min=-0.000275 max=0.000270 Jy/beam ! Clean residual mean=-0.000001 rms=0.000104 Jy/beam ! Combined flux in latest and established models = 0.150511 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 548 components and 0.150511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100360Jy sigma=0.000565 ! Fit after self-cal, rms=0.100361Jy sigma=0.000565 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.90728e-05 Jy ! Component: 100 - total flux cleaned = 0.000236368 Jy ! Component: 150 - total flux cleaned = 0.000350386 Jy ! Component: 200 - total flux cleaned = 0.000321649 Jy ! Total flux subtracted in 200 components = 0.000321649 Jy ! Clean residual min=-0.000265 max=0.000253 Jy/beam ! Clean residual mean=-0.000003 rms=0.000099 Jy/beam ! Combined flux in latest and established models = 0.150833 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 596 components and 0.150833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100357Jy sigma=0.000565 ! Fit after self-cal, rms=0.100353Jy sigma=0.000565 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=16.54 mas, bmaj=212.7 mas, bpa=-21.59 degrees ! Estimated noise=2413.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 16.54 x 212.7 at -21.59 degrees (North through East) ! Clean map min=-0.00906 max=0.10569 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.54 mas, bmaj=212.7 mas, bpa=-21.59 degrees ! Estimated noise=2413.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861383 Jy ! Component: 100 - total flux cleaned = 0.112004 Jy ! Component: 150 - total flux cleaned = 0.127682 Jy ! Component: 200 - total flux cleaned = 0.137357 Jy ! Total flux subtracted in 200 components = 0.137357 Jy ! Clean residual min=-0.006090 max=0.006093 Jy/beam ! Clean residual mean=-0.000024 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 0.137357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.137357 Jy ! Inverting map and beam ! Estimated beam: bmin=16.54 mas, bmaj=212.7 mas, bpa=-21.59 degrees ! Estimated noise=2413.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244514 Jy ! Component: 100 - total flux cleaned = 0.00201896 Jy ! Component: 150 - total flux cleaned = 0.00408986 Jy ! Component: 200 - total flux cleaned = 0.0038135 Jy ! Total flux subtracted in 200 components = 0.0038135 Jy ! Clean residual min=-0.002375 max=0.002390 Jy/beam ! Clean residual mean=-0.000006 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.141171 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 114 components and 0.141171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.88 mas, bmaj=211 mas, bpa=-21.64 degrees ! Estimated noise=2412.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000692531 Jy ! Component: 100 - total flux cleaned = -0.00133703 Jy ! Component: 150 - total flux cleaned = -0.00196408 Jy ! Component: 200 - total flux cleaned = -0.00218761 Jy ! Total flux subtracted in 200 components = -0.00218761 Jy ! Clean residual min=-0.000771 max=0.000748 Jy/beam ! Clean residual mean=-0.000004 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.138983 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232078 Jy ! Component: 100 - total flux cleaned = -0.000230678 Jy ! Component: 150 - total flux cleaned = -0.000364118 Jy ! Component: 200 - total flux cleaned = -0.000444058 Jy ! Total flux subtracted in 200 components = -0.000444058 Jy ! Clean residual min=-0.001446 max=0.001500 Jy/beam ! Clean residual mean=-0.000005 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.138539 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 220 components and 0.138539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=16.54 mas, bmaj=212.7 mas, bpa=-21.59 degrees ! Estimated noise=2413.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000851532 Jy ! Component: 100 - total flux cleaned = -0.000973767 Jy ! Component: 150 - total flux cleaned = -0.00103284 Jy ! Component: 200 - total flux cleaned = -0.00129355 Jy ! Total flux subtracted in 200 components = -0.00129355 Jy ! Clean residual min=-0.001194 max=0.001175 Jy/beam ! Clean residual mean=-0.000000 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.137245 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 252 components and 0.137245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100433Jy sigma=0.000566 ! Fit after self-cal, rms=0.100471Jy sigma=0.000566 wmodel J0706-4122_S_2017_09_26_pus_map.mod ! Writing 252 model components to file: J0706-4122_S_2017_09_26_pus_map.mod wobs J0706-4122_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0706-4122_S_2017_09_26_pus_uvs.fits wwins J0706-4122_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0706-4122_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336158 Jy ! Component: 100 - total flux cleaned = -0.000186986 Jy ! Component: 150 - total flux cleaned = -3.18428e-05 Jy ! Component: 200 - total flux cleaned = 0.000156291 Jy ! Component: 250 - total flux cleaned = 0.000238945 Jy ! Component: 300 - total flux cleaned = 0.000307828 Jy ! Component: 350 - total flux cleaned = 0.000382687 Jy ! Component: 400 - total flux cleaned = 0.000436444 Jy ! Component: 450 - total flux cleaned = 0.000488325 Jy ! Component: 500 - total flux cleaned = 0.000530095 Jy ! Component: 550 - total flux cleaned = 0.000497004 Jy ! Component: 600 - total flux cleaned = 0.000454546 Jy ! Component: 650 - total flux cleaned = 0.000410959 Jy ! Component: 700 - total flux cleaned = 0.00036604 Jy ! Component: 750 - total flux cleaned = 0.000320137 Jy ! Component: 800 - total flux cleaned = 0.00026335 Jy ! Component: 850 - total flux cleaned = 0.00020473 Jy ! Component: 900 - total flux cleaned = 0.000144178 Jy ! Component: 950 - total flux cleaned = 8.19519e-05 Jy ! Component: 1000 - total flux cleaned = 7.16269e-06 Jy ! Component: 1050 - total flux cleaned = -7.0294e-05 Jy ! Component: 1100 - total flux cleaned = -0.000139435 Jy ! Component: 1150 - total flux cleaned = -0.000223522 Jy ! Component: 1200 - total flux cleaned = -0.000323026 Jy ! Component: 1250 - total flux cleaned = -0.000414081 Jy ! Component: 1300 - total flux cleaned = -0.000508736 Jy ! Component: 1350 - total flux cleaned = -0.000606952 Jy ! Component: 1400 - total flux cleaned = -0.000708926 Jy ! Component: 1450 - total flux cleaned = -0.000830653 Jy ! Component: 1500 - total flux cleaned = -0.000941203 Jy ! Component: 1550 - total flux cleaned = -0.0010562 Jy ! Component: 1600 - total flux cleaned = -0.00115815 Jy ! Component: 1650 - total flux cleaned = -0.00124707 Jy ! Component: 1700 - total flux cleaned = -0.00132142 Jy ! Component: 1750 - total flux cleaned = -0.00141863 Jy ! Component: 1800 - total flux cleaned = -0.0014995 Jy ! Component: 1850 - total flux cleaned = -0.00160516 Jy ! Component: 1900 - total flux cleaned = -0.00169359 Jy ! Component: 1950 - total flux cleaned = -0.00178566 Jy ! Component: 2000 - total flux cleaned = -0.00190543 Jy ! Component: 2050 - total flux cleaned = -0.00203155 Jy ! Component: 2100 - total flux cleaned = -0.0021364 Jy ! Component: 2150 - total flux cleaned = -0.00224527 Jy ! Component: 2200 - total flux cleaned = -0.00235946 Jy ! Component: 2250 - total flux cleaned = -0.00247788 Jy ! Component: 2300 - total flux cleaned = -0.00263261 Jy ! Component: 2350 - total flux cleaned = -0.00279508 Jy ! Component: 2400 - total flux cleaned = -0.00293036 Jy ! Component: 2450 - total flux cleaned = -0.00307094 Jy ! Component: 2500 - total flux cleaned = -0.00325497 Jy ! Component: 2550 - total flux cleaned = -0.00341012 Jy ! Component: 2600 - total flux cleaned = -0.00357075 Jy ! Component: 2650 - total flux cleaned = -0.00378038 Jy ! Component: 2700 - total flux cleaned = -0.00395634 Jy ! Component: 2750 - total flux cleaned = -0.00395533 Jy ! Component: 2800 - total flux cleaned = -0.00395493 Jy ! Component: 2850 - total flux cleaned = -0.00395668 Jy ! Component: 2900 - total flux cleaned = -0.00395762 Jy ! Component: 2950 - total flux cleaned = -0.00395856 Jy ! Component: 3000 - total flux cleaned = -0.00396035 Jy ! Component: 3050 - total flux cleaned = -0.00396022 Jy ! Component: 3100 - total flux cleaned = -0.00396163 Jy ! Component: 3150 - total flux cleaned = -0.00388111 Jy ! Component: 3200 - total flux cleaned = -0.00387966 Jy ! Component: 3250 - total flux cleaned = -0.00387871 Jy ! Component: 3300 - total flux cleaned = -0.00387775 Jy ! Component: 3350 - total flux cleaned = -0.00387628 Jy ! Component: 3400 - total flux cleaned = -0.00387524 Jy ! Component: 3450 - total flux cleaned = -0.00387402 Jy ! Component: 3500 - total flux cleaned = -0.00387305 Jy ! Component: 3550 - total flux cleaned = -0.00387196 Jy ! Component: 3600 - total flux cleaned = -0.0038716 Jy ! Component: 3650 - total flux cleaned = -0.00386562 Jy ! Component: 3700 - total flux cleaned = -0.0038621 Jy ! Component: 3750 - total flux cleaned = -0.00385939 Jy ! Component: 3800 - total flux cleaned = -0.003857 Jy ! Component: 3850 - total flux cleaned = -0.00385515 Jy ! Component: 3900 - total flux cleaned = -0.00385414 Jy ! Component: 3950 - total flux cleaned = -0.00412032 Jy ! Component: 4000 - total flux cleaned = -0.00413704 Jy ! Component: 4050 - total flux cleaned = -0.00384332 Jy ! Total flux subtracted in 4096 components = -0.00384213 Jy ! Clean residual min=-0.016708 max=0.016667 Jy/beam ! Clean residual mean=-0.000034 rms=0.005472 Jy/beam ! Combined flux in latest and established models = 0.133403 Jy keep ! Adding 200 model components to the UV plane model. ! The established model now contains 451 components and 0.133403 Jy ![Exited script file: muppet] wmap "J0706-4122_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 16.54 x 212.7 at -21.59 degrees (North through East) ! Clean map min=-0.028684 max=0.14133 Jy/beam ! Writing clean map to FITS file: J0706-4122_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141327 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00691352 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -14.6756 14.6756 29.3512 58.7025 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0207 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 16.54 x 212.7 at -21.59 degrees (North through East) ! Clean map min=-0.028684 max=0.14133 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0706-4122_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:56:53 2019