! Started logfile: J0706-2311_S_2017_09_26_pus_uvs.log on Sat May 11 12:56:23 2019 obs J0706-2311_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0706-2311_S_2017_09_26_pus_uva.fits ! AN table 1: 421 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.512866 visibilities/baseline/integration-bin. ! Found source: J0706-2311 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 31092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0706-2311_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1458 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1615 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1636 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2954 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980632Jy sigma=0.006882 ! Fit after self-cal, rms=0.919965Jy sigma=0.006462 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=10.94 mas, bpa=-19.33 degrees ! Estimated noise=1742.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572724 Jy ! Component: 100 - total flux cleaned = 0.077007 Jy ! Total flux subtracted in 100 components = 0.077007 Jy ! Clean residual min=-0.012408 max=0.019094 Jy/beam ! Clean residual mean=-0.000361 rms=0.005442 Jy/beam ! Combined flux in latest and established models = 0.077007 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.077007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169919Jy sigma=0.001283 ! Fit after self-cal, rms=0.169264Jy sigma=0.001279 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=13.74 mas, bpa=-15.96 degrees ! Estimated noise=688.897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460068 Jy ! Component: 100 - total flux cleaned = 0.0756866 Jy ! Component: 150 - total flux cleaned = 0.095044 Jy ! Component: 200 - total flux cleaned = 0.107668 Jy ! Total flux subtracted in 200 components = 0.107668 Jy ! Clean residual min=-0.027195 max=0.046330 Jy/beam ! Clean residual mean=-0.000932 rms=0.014281 Jy/beam ! Combined flux in latest and established models = 0.184675 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.184675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157109Jy sigma=0.001169 ! Fit after self-cal, rms=0.156087Jy sigma=0.001163 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.45 FD 1.00* HN 1.90 KP 1.26 ! LA 0.65 MK 1.53 NL 3.34 OV 4.18 ! PT 0.51 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.44 FD 1.00* HN 1.88 KP 1.27 ! LA 0.59 MK 2.34 NL 3.78 OV 5.07 ! PT 0.50 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.90 FD 1.00* HN 1.80 KP 1.41 ! LA 0.66 MK 2.31 NL 3.29 OV 3.27 ! PT 0.44 ! ! ! Correcting IF 4. ! A total of 297 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.85 KP 1.00* ! LA 0.50 MK 1.06 NL 1.00* OV 1.14 ! PT 0.84 ! ! ! Fit before self-cal, rms=0.156087Jy sigma=0.001163 ! Fit after self-cal, rms=0.564532Jy sigma=0.000866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.322 mas, bmaj=17.31 mas, bpa=-15.56 degrees ! Estimated noise=1015.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134577 Jy ! Component: 100 - total flux cleaned = 0.0125015 Jy ! Component: 150 - total flux cleaned = 0.0116594 Jy ! Component: 200 - total flux cleaned = 0.0108906 Jy ! Total flux subtracted in 200 components = 0.0108906 Jy ! Clean residual min=-0.030957 max=0.037999 Jy/beam ! Clean residual mean=-0.000426 rms=0.008621 Jy/beam ! Combined flux in latest and established models = 0.195565 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.195565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.560832Jy sigma=0.000873 ! Fit after self-cal, rms=0.579522Jy sigma=0.000841 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579522Jy sigma=0.000841 ! Fit after self-cal, rms=0.848295Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=17.53 mas, bpa=-16.09 degrees ! Estimated noise=1136.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306844 Jy ! Component: 100 - total flux cleaned = 0.00270267 Jy ! Component: 150 - total flux cleaned = 0.00239326 Jy ! Component: 200 - total flux cleaned = 0.00212511 Jy ! Total flux subtracted in 200 components = 0.00212511 Jy ! Clean residual min=-0.009492 max=0.013999 Jy/beam ! Clean residual mean=0.000021 rms=0.003093 Jy/beam ! Combined flux in latest and established models = 0.19769 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.19769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.847969Jy sigma=0.000720 ! Fit after self-cal, rms=0.850210Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667142 Jy ! Component: 100 - total flux cleaned = 0.00515932 Jy ! Component: 150 - total flux cleaned = 0.00385175 Jy ! Component: 200 - total flux cleaned = 0.00269689 Jy ! Total flux subtracted in 200 components = 0.00269689 Jy ! Clean residual min=-0.008391 max=0.011586 Jy/beam ! Clean residual mean=0.000071 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 0.200387 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.200387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.849538Jy sigma=0.000716 ! Fit after self-cal, rms=0.847577Jy sigma=0.000714 ! Inverting map ! Added new window around map position (-71.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136323 Jy ! Component: 100 - total flux cleaned = 0.016115 Jy ! Component: 150 - total flux cleaned = 0.0172904 Jy ! Component: 200 - total flux cleaned = 0.0180899 Jy ! Total flux subtracted in 200 components = 0.0180899 Jy ! Clean residual min=-0.008733 max=0.010207 Jy/beam ! Clean residual mean=0.000085 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.218477 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 106 components and 0.218477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.846782Jy sigma=0.000711 ! Fit after self-cal, rms=0.845135Jy sigma=0.000708 ! Inverting map ! Added new window around map position (-104.5, 74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00997121 Jy ! Component: 100 - total flux cleaned = 0.0107487 Jy ! Component: 150 - total flux cleaned = 0.0120841 Jy ! Component: 200 - total flux cleaned = 0.0123772 Jy ! Total flux subtracted in 200 components = 0.0123772 Jy ! Clean residual min=-0.007338 max=0.009568 Jy/beam ! Clean residual mean=0.000084 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 0.230854 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 127 components and 0.230854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.844051Jy sigma=0.000705 ! Fit after self-cal, rms=0.842226Jy sigma=0.000703 ! Inverting map ! Added new window around map position (-99.5, -40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130659 Jy ! Component: 100 - total flux cleaned = 0.0202046 Jy ! Component: 150 - total flux cleaned = 0.0249724 Jy ! Component: 200 - total flux cleaned = 0.0281027 Jy ! Total flux subtracted in 200 components = 0.0281027 Jy ! Clean residual min=-0.006914 max=0.010953 Jy/beam ! Clean residual mean=0.000055 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 0.258957 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 156 components and 0.258957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.840938Jy sigma=0.000702 ! Fit after self-cal, rms=0.838400Jy sigma=0.000700 ! Inverting map ! Added new window around map position (-89, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127508 Jy ! Component: 100 - total flux cleaned = 0.019418 Jy ! Component: 150 - total flux cleaned = 0.0261592 Jy ! Component: 200 - total flux cleaned = 0.0318767 Jy ! Total flux subtracted in 200 components = 0.0318767 Jy ! Clean residual min=-0.007177 max=0.010596 Jy/beam ! Clean residual mean=0.000097 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.290834 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 173 components and 0.290834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.836846Jy sigma=0.000699 ! Fit after self-cal, rms=0.834046Jy sigma=0.000697 ! Inverting map ! Added new window around map position (45.5, 67.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124551 Jy ! Component: 100 - total flux cleaned = 0.021644 Jy ! Component: 150 - total flux cleaned = 0.028353 Jy ! Component: 200 - total flux cleaned = 0.0344718 Jy ! Total flux subtracted in 200 components = 0.0344718 Jy ! Clean residual min=-0.006901 max=0.008535 Jy/beam ! Clean residual mean=0.000085 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 0.325306 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 199 components and 0.325305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.832453Jy sigma=0.000696 ! Fit after self-cal, rms=0.830616Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.830616Jy sigma=0.000695 ! Fit after self-cal, rms=0.749417Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.499 mas, bmaj=17.87 mas, bpa=-16.53 degrees ! Estimated noise=1128.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083132 Jy ! Component: 100 - total flux cleaned = 0.0134615 Jy ! Component: 150 - total flux cleaned = 0.0167744 Jy ! Component: 200 - total flux cleaned = 0.0201007 Jy ! Total flux subtracted in 200 components = 0.0201007 Jy ! Clean residual min=-0.007122 max=0.006151 Jy/beam ! Clean residual mean=0.000003 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.345406 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 228 components and 0.345406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748785Jy sigma=0.000689 ! Fit after self-cal, rms=0.746079Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690091 Jy ! Component: 100 - total flux cleaned = 0.0120226 Jy ! Component: 150 - total flux cleaned = 0.0164478 Jy ! Component: 200 - total flux cleaned = 0.0205002 Jy ! Total flux subtracted in 200 components = 0.0205002 Jy ! Clean residual min=-0.007942 max=0.006654 Jy/beam ! Clean residual mean=0.000008 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.365906 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 249 components and 0.365906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.745350Jy sigma=0.000687 ! Fit after self-cal, rms=0.744190Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.744190Jy sigma=0.000686 ! Fit after self-cal, rms=0.766174Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.6 mas, bmaj=30.91 mas, bpa=-5.897 degrees ! Estimated noise=1038.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502558 Jy ! Component: 100 - total flux cleaned = 0.00853499 Jy ! Component: 150 - total flux cleaned = 0.0122708 Jy ! Component: 200 - total flux cleaned = 0.0154241 Jy ! Total flux subtracted in 200 components = 0.0154241 Jy ! Clean residual min=-0.008381 max=0.006577 Jy/beam ! Clean residual mean=-0.000007 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 0.38133 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 280 components and 0.38133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.765656Jy sigma=0.000684 ! Fit after self-cal, rms=0.764332Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357159 Jy ! Component: 100 - total flux cleaned = 0.00786851 Jy ! Component: 150 - total flux cleaned = 0.0124037 Jy ! Component: 200 - total flux cleaned = 0.0168802 Jy ! Total flux subtracted in 200 components = 0.0168802 Jy ! Clean residual min=-0.008579 max=0.006899 Jy/beam ! Clean residual mean=0.000001 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.398211 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 311 components and 0.398211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.763903Jy sigma=0.000683 ! Fit after self-cal, rms=0.763266Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.552 mas, bmaj=17.9 mas, bpa=-16.75 degrees ! Estimated noise=1121.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.552 x 17.9 at -16.75 degrees (North through East) ! Clean map min=-0.01342 max=0.12969 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=12.03 mas, bpa=-19.28 degrees ! Estimated noise=4383.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106104 Jy ! Component: 100 - total flux cleaned = 0.15493 Jy ! Component: 150 - total flux cleaned = 0.191152 Jy ! Component: 200 - total flux cleaned = 0.219725 Jy ! Total flux subtracted in 200 components = 0.219725 Jy ! Clean residual min=-0.021600 max=0.033802 Jy/beam ! Clean residual mean=-0.000065 rms=0.006420 Jy/beam ! Combined flux in latest and established models = 0.219725 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.219725 Jy ! Inverting map and beam ! Estimated beam: bmin=4.552 mas, bmaj=17.9 mas, bpa=-16.75 degrees ! Estimated noise=1121.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350238 Jy ! Component: 100 - total flux cleaned = 0.0609473 Jy ! Component: 150 - total flux cleaned = 0.0820453 Jy ! Component: 200 - total flux cleaned = 0.0949768 Jy ! Total flux subtracted in 200 components = 0.0949768 Jy ! Clean residual min=-0.013104 max=0.016778 Jy/beam ! Clean residual mean=-0.000010 rms=0.005228 Jy/beam ! Combined flux in latest and established models = 0.314701 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 76 components and 0.314701 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.6 mas, bmaj=30.91 mas, bpa=-5.897 degrees ! Estimated noise=1038.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186139 Jy ! Component: 100 - total flux cleaned = 0.028988 Jy ! Component: 150 - total flux cleaned = 0.0347903 Jy ! Component: 200 - total flux cleaned = 0.0413666 Jy ! Total flux subtracted in 200 components = 0.0413666 Jy ! Clean residual min=-0.013110 max=0.013436 Jy/beam ! Clean residual mean=-0.000056 rms=0.004532 Jy/beam ! Combined flux in latest and established models = 0.356068 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554323 Jy ! Component: 100 - total flux cleaned = 0.0134346 Jy ! Component: 150 - total flux cleaned = 0.0196859 Jy ! Component: 200 - total flux cleaned = 0.0251601 Jy ! Total flux subtracted in 200 components = 0.0251601 Jy ! Clean residual min=-0.012077 max=0.011835 Jy/beam ! Clean residual mean=0.000024 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 0.381228 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 126 components and 0.381228 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.552 mas, bmaj=17.9 mas, bpa=-16.75 degrees ! Estimated noise=1121.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805366 Jy ! Component: 100 - total flux cleaned = 0.0128671 Jy ! Component: 150 - total flux cleaned = 0.0178382 Jy ! Component: 200 - total flux cleaned = 0.0221276 Jy ! Total flux subtracted in 200 components = 0.0221276 Jy ! Clean residual min=-0.008427 max=0.010095 Jy/beam ! Clean residual mean=-0.000026 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 0.403356 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 154 components and 0.403356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.763645Jy sigma=0.000687 ! Fit after self-cal, rms=0.762751Jy sigma=0.000685 wmodel J0706-2311_S_2017_09_26_pus_map.mod ! Writing 154 model components to file: J0706-2311_S_2017_09_26_pus_map.mod wobs J0706-2311_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0706-2311_S_2017_09_26_pus_uvs.fits wwins J0706-2311_S_2017_09_26_pus_map.win ! wwins: Wrote 7 windows to J0706-2311_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604056 Jy ! Component: 100 - total flux cleaned = -0.000612494 Jy ! Component: 150 - total flux cleaned = -2.14662e-05 Jy ! Component: 200 - total flux cleaned = 0.000865227 Jy ! Component: 250 - total flux cleaned = 0.00170233 Jy ! Component: 300 - total flux cleaned = 0.00270414 Jy ! Component: 350 - total flux cleaned = 0.00367501 Jy ! Component: 400 - total flux cleaned = 0.00461844 Jy ! Component: 450 - total flux cleaned = 0.00544555 Jy ! Component: 500 - total flux cleaned = 0.00598371 Jy ! Component: 550 - total flux cleaned = 0.00668835 Jy ! Component: 600 - total flux cleaned = 0.00729539 Jy ! Component: 650 - total flux cleaned = 0.00806041 Jy ! Component: 700 - total flux cleaned = 0.00872985 Jy ! Component: 750 - total flux cleaned = 0.00922392 Jy ! Component: 800 - total flux cleaned = 0.00979331 Jy ! Component: 850 - total flux cleaned = 0.0100346 Jy ! Component: 900 - total flux cleaned = 0.0105112 Jy ! Component: 950 - total flux cleaned = 0.0108244 Jy ! Component: 1000 - total flux cleaned = 0.0112122 Jy ! Component: 1050 - total flux cleaned = 0.0113655 Jy ! Component: 1100 - total flux cleaned = 0.011593 Jy ! Component: 1150 - total flux cleaned = 0.0119674 Jy ! Component: 1200 - total flux cleaned = 0.0118925 Jy ! Component: 1250 - total flux cleaned = 0.0118183 Jy ! Component: 1300 - total flux cleaned = 0.0119646 Jy ! Component: 1350 - total flux cleaned = 0.0121096 Jy ! Component: 1400 - total flux cleaned = 0.0121098 Jy ! Component: 1450 - total flux cleaned = 0.012252 Jy ! Component: 1500 - total flux cleaned = 0.0121811 Jy ! Component: 1550 - total flux cleaned = 0.0123931 Jy ! Component: 1600 - total flux cleaned = 0.0123232 Jy ! Component: 1650 - total flux cleaned = 0.0119741 Jy ! Component: 1700 - total flux cleaned = 0.0118361 Jy ! Component: 1750 - total flux cleaned = 0.0115598 Jy ! Component: 1800 - total flux cleaned = 0.0113533 Jy ! Component: 1850 - total flux cleaned = 0.0109429 Jy ! Component: 1900 - total flux cleaned = 0.0106709 Jy ! Component: 1950 - total flux cleaned = 0.0101964 Jy ! Component: 2000 - total flux cleaned = 0.00985822 Jy ! Component: 2050 - total flux cleaned = 0.00958934 Jy ! Component: 2100 - total flux cleaned = 0.00911935 Jy ! Component: 2150 - total flux cleaned = 0.00865055 Jy ! Component: 2200 - total flux cleaned = 0.00824915 Jy ! Component: 2250 - total flux cleaned = 0.00771441 Jy ! Component: 2300 - total flux cleaned = 0.00711396 Jy ! Component: 2350 - total flux cleaned = 0.00651399 Jy ! Component: 2400 - total flux cleaned = 0.00571428 Jy ! Component: 2450 - total flux cleaned = 0.00524804 Jy ! Component: 2500 - total flux cleaned = 0.00464825 Jy ! Component: 2550 - total flux cleaned = 0.00431483 Jy ! Component: 2600 - total flux cleaned = 0.00378062 Jy ! Component: 2650 - total flux cleaned = 0.00324587 Jy ! Component: 2700 - total flux cleaned = 0.0026411 Jy ! Component: 2750 - total flux cleaned = 0.00216859 Jy ! Component: 2800 - total flux cleaned = 0.0016251 Jy ! Component: 2850 - total flux cleaned = 0.00107841 Jy ! Component: 2900 - total flux cleaned = 0.000597261 Jy ! Component: 2950 - total flux cleaned = 0.000319984 Jy ! Component: 3000 - total flux cleaned = -0.000102271 Jy ! Component: 3050 - total flux cleaned = -0.000531422 Jy ! Component: 3100 - total flux cleaned = -0.00096632 Jy ! Component: 3150 - total flux cleaned = -0.00147947 Jy ! Component: 3200 - total flux cleaned = -0.00200138 Jy ! Component: 3250 - total flux cleaned = -0.00245613 Jy ! Component: 3300 - total flux cleaned = -0.00307244 Jy ! Component: 3350 - total flux cleaned = -0.00354197 Jy ! Component: 3400 - total flux cleaned = -0.00409863 Jy ! Component: 3450 - total flux cleaned = -0.00466573 Jy ! Component: 3500 - total flux cleaned = -0.00524238 Jy ! Component: 3550 - total flux cleaned = -0.00591341 Jy ! Component: 3600 - total flux cleaned = -0.00659689 Jy ! Component: 3650 - total flux cleaned = -0.00720574 Jy ! Component: 3700 - total flux cleaned = -0.0076488 Jy ! Component: 3750 - total flux cleaned = -0.00801076 Jy ! Component: 3800 - total flux cleaned = -0.00847327 Jy ! Component: 3850 - total flux cleaned = -0.00875618 Jy ! Component: 3900 - total flux cleaned = -0.00923632 Jy ! Component: 3950 - total flux cleaned = -0.0096303 Jy ! Component: 4000 - total flux cleaned = -0.00993165 Jy ! Component: 4050 - total flux cleaned = -0.0102399 Jy ! Total flux subtracted in 4096 components = -0.0104486 Jy ! Clean residual min=-0.006626 max=0.006105 Jy/beam ! Clean residual mean=-0.000256 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.392907 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 420 components and 0.392907 Jy ![Exited script file: muppet] wmap "J0706-2311_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.552 x 17.9 at -16.75 degrees (North through East) ! Clean map min=-0.013273 max=0.14597 Jy/beam ! Writing clean map to FITS file: J0706-2311_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00198828 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.08628 4.08628 8.17256 16.3451 32.6903 65.3805 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.552 x 17.9 at -16.75 degrees (North through East) ! Clean map min=-0.013273 max=0.14597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0706-2311_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:56:30 2019