! Started logfile: J0706-2311_S_2017_02_19_pus_uvs.log on Sat May 4 18:44:54 2019 obs J0706-2311_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0706-2311_S_2017_02_19_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J0706-2311 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 17400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0706-2311_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 670 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987174Jy sigma=0.006507 ! Fit after self-cal, rms=0.939802Jy sigma=0.006210 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=6.081 mas, bpa=-4.352 degrees ! Estimated noise=1376.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451457 Jy ! Component: 100 - total flux cleaned = 0.0567451 Jy ! Total flux subtracted in 100 components = 0.0567451 Jy ! Clean residual min=-0.004993 max=0.007359 Jy/beam ! Clean residual mean=0.000019 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.0567451 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0567451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115412Jy sigma=0.000699 ! Fit after self-cal, rms=0.114421Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.532 mas, bpa=-6.874 degrees ! Estimated noise=902.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142125 Jy ! Component: 100 - total flux cleaned = 0.0219417 Jy ! Component: 150 - total flux cleaned = 0.0265468 Jy ! Component: 200 - total flux cleaned = 0.0293251 Jy ! Total flux subtracted in 200 components = 0.0293251 Jy ! Clean residual min=-0.005951 max=0.008249 Jy/beam ! Clean residual mean=0.000016 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.0860703 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 54 components and 0.0860703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112328Jy sigma=0.000681 ! Fit after self-cal, rms=0.111828Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.99 HN 1.11 KP 0.95 ! LA 0.89 MK 1.09 NL 1.10 OV 1.20 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.16 KP 0.80 ! LA 0.89 MK 1.17 NL 1.30 OV 1.14 ! PT 1.00* SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.06 KP 0.66 ! LA 0.70 MK 1.24 NL 1.38 OV 1.07 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.89 HN 0.81 KP 1.00* ! LA 0.66 MK 0.97 NL 1.00* OV 0.96 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.111828Jy sigma=0.000679 ! Fit after self-cal, rms=0.110884Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=7.775 mas, bpa=-6.37 degrees ! Estimated noise=908.302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418114 Jy ! Component: 100 - total flux cleaned = 0.000562266 Jy ! Component: 150 - total flux cleaned = 0.000661524 Jy ! Component: 200 - total flux cleaned = 0.000753937 Jy ! Total flux subtracted in 200 components = 0.000753937 Jy ! Clean residual min=-0.005767 max=0.008347 Jy/beam ! Clean residual mean=0.000013 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.0868242 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.0868242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110864Jy sigma=0.000670 ! Fit after self-cal, rms=0.111478Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111478Jy sigma=0.000667 ! Fit after self-cal, rms=0.127993Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.912 mas, bpa=-6.485 degrees ! Estimated noise=934.284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820078 Jy ! Component: 100 - total flux cleaned = 0.00106675 Jy ! Component: 150 - total flux cleaned = 0.00130458 Jy ! Component: 200 - total flux cleaned = 0.00139437 Jy ! Total flux subtracted in 200 components = 0.00139437 Jy ! Clean residual min=-0.004638 max=0.008097 Jy/beam ! Clean residual mean=0.000006 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.0882186 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0882186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127943Jy sigma=0.000660 ! Fit after self-cal, rms=0.129199Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218026 Jy ! Component: 100 - total flux cleaned = -0.000218587 Jy ! Component: 150 - total flux cleaned = -0.000176565 Jy ! Component: 200 - total flux cleaned = -0.000157393 Jy ! Total flux subtracted in 200 components = -0.000157393 Jy ! Clean residual min=-0.004276 max=0.005823 Jy/beam ! Clean residual mean=0.000007 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.0880612 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.0880612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129193Jy sigma=0.000658 ! Fit after self-cal, rms=0.129200Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129200Jy sigma=0.000658 ! Fit after self-cal, rms=0.141093Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.975 mas, bpa=-6.456 degrees ! Estimated noise=946.649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440665 Jy ! Component: 100 - total flux cleaned = 0.00065948 Jy ! Component: 150 - total flux cleaned = 0.000739581 Jy ! Component: 200 - total flux cleaned = 0.0007884 Jy ! Total flux subtracted in 200 components = 0.0007884 Jy ! Clean residual min=-0.004494 max=0.007212 Jy/beam ! Clean residual mean=0.000004 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.0888496 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0888496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141068Jy sigma=0.000657 ! Fit after self-cal, rms=0.141692Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (70, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582955 Jy ! Component: 100 - total flux cleaned = 0.00875875 Jy ! Component: 150 - total flux cleaned = 0.010583 Jy ! Component: 200 - total flux cleaned = 0.0119597 Jy ! Total flux subtracted in 200 components = 0.0119597 Jy ! Clean residual min=-0.003766 max=0.005039 Jy/beam ! Clean residual mean=0.000002 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.100809 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.100809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141388Jy sigma=0.000655 ! Fit after self-cal, rms=0.140774Jy sigma=0.000654 ! Inverting map ! Added new window around map position (-12, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494811 Jy ! Component: 100 - total flux cleaned = 0.00808292 Jy ! Component: 150 - total flux cleaned = 0.00959136 Jy ! Component: 200 - total flux cleaned = 0.0110111 Jy ! Total flux subtracted in 200 components = 0.0110111 Jy ! Clean residual min=-0.003588 max=0.003491 Jy/beam ! Clean residual mean=0.000005 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.11182 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.11182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140459Jy sigma=0.000653 ! Fit after self-cal, rms=0.139775Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139775Jy sigma=0.000652 ! Fit after self-cal, rms=0.132136Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=16.84 mas, bpa=3.037 degrees ! Estimated noise=1153.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558983 Jy ! Component: 100 - total flux cleaned = 0.0086308 Jy ! Component: 150 - total flux cleaned = 0.0099867 Jy ! Component: 200 - total flux cleaned = 0.0110362 Jy ! Total flux subtracted in 200 components = 0.0110362 Jy ! Clean residual min=-0.003569 max=0.004042 Jy/beam ! Clean residual mean=0.000013 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.122857 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 149 components and 0.122857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131946Jy sigma=0.000651 ! Fit after self-cal, rms=0.131374Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342886 Jy ! Component: 100 - total flux cleaned = 0.00445541 Jy ! Component: 150 - total flux cleaned = 0.00508249 Jy ! Component: 200 - total flux cleaned = 0.00562575 Jy ! Total flux subtracted in 200 components = 0.00562575 Jy ! Clean residual min=-0.003634 max=0.004740 Jy/beam ! Clean residual mean=0.000013 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.128482 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 162 components and 0.128482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131257Jy sigma=0.000650 ! Fit after self-cal, rms=0.130900Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.974 mas, bpa=-6.125 degrees ! Estimated noise=923.687 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.974 at -6.125 degrees (North through East) ! Clean map min=-0.0040493 max=0.062967 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=6.382 mas, bpa=-4.146 degrees ! Estimated noise=1456.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458243 Jy ! Component: 100 - total flux cleaned = 0.0593839 Jy ! Component: 150 - total flux cleaned = 0.0690053 Jy ! Component: 200 - total flux cleaned = 0.0768211 Jy ! Total flux subtracted in 200 components = 0.0768211 Jy ! Clean residual min=-0.005620 max=0.006442 Jy/beam ! Clean residual mean=0.000012 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.0768211 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0768211 Jy ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.974 mas, bpa=-6.125 degrees ! Estimated noise=923.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110167 Jy ! Component: 100 - total flux cleaned = 0.0190532 Jy ! Component: 150 - total flux cleaned = 0.0254924 Jy ! Component: 200 - total flux cleaned = 0.030804 Jy ! Total flux subtracted in 200 components = 0.030804 Jy ! Clean residual min=-0.004533 max=0.004521 Jy/beam ! Clean residual mean=0.000011 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.107625 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 63 components and 0.107625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=16.84 mas, bpa=3.037 degrees ! Estimated noise=1153.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00765229 Jy ! Component: 100 - total flux cleaned = 0.0124826 Jy ! Component: 150 - total flux cleaned = 0.0150022 Jy ! Component: 200 - total flux cleaned = 0.0170598 Jy ! Total flux subtracted in 200 components = 0.0170598 Jy ! Clean residual min=-0.004282 max=0.005081 Jy/beam ! Clean residual mean=0.000015 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.124685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181274 Jy ! Component: 100 - total flux cleaned = 0.00322295 Jy ! Component: 150 - total flux cleaned = 0.00402955 Jy ! Component: 200 - total flux cleaned = 0.00459695 Jy ! Total flux subtracted in 200 components = 0.00459695 Jy ! Clean residual min=-0.003640 max=0.004861 Jy/beam ! Clean residual mean=0.000013 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.129282 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 127 components and 0.129282 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.974 mas, bpa=-6.125 degrees ! Estimated noise=923.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138631 Jy ! Component: 100 - total flux cleaned = 0.00122897 Jy ! Component: 150 - total flux cleaned = 0.00130286 Jy ! Component: 200 - total flux cleaned = 0.0012387 Jy ! Total flux subtracted in 200 components = 0.0012387 Jy ! Clean residual min=-0.002916 max=0.003756 Jy/beam ! Clean residual mean=0.000008 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.130521 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.130521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130858Jy sigma=0.000649 ! Fit after self-cal, rms=0.130509Jy sigma=0.000649 wmodel J0706-2311_S_2017_02_19_pus_map.mod ! Writing 149 model components to file: J0706-2311_S_2017_02_19_pus_map.mod wobs J0706-2311_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0706-2311_S_2017_02_19_pus_uvs.fits wwins J0706-2311_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0706-2311_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137147 Jy ! Component: 100 - total flux cleaned = 0.00232098 Jy ! Component: 150 - total flux cleaned = 0.0032101 Jy ! Component: 200 - total flux cleaned = 0.00396286 Jy ! Component: 250 - total flux cleaned = 0.00473849 Jy ! Component: 300 - total flux cleaned = 0.0054432 Jy ! Component: 350 - total flux cleaned = 0.0060816 Jy ! Component: 400 - total flux cleaned = 0.00661325 Jy ! Component: 450 - total flux cleaned = 0.00708765 Jy ! Component: 500 - total flux cleaned = 0.00746571 Jy ! Component: 550 - total flux cleaned = 0.00771193 Jy ! Component: 600 - total flux cleaned = 0.00795285 Jy ! Component: 650 - total flux cleaned = 0.00806982 Jy ! Component: 700 - total flux cleaned = 0.00803147 Jy ! Component: 750 - total flux cleaned = 0.00821997 Jy ! Component: 800 - total flux cleaned = 0.00829308 Jy ! Component: 850 - total flux cleaned = 0.00840158 Jy ! Component: 900 - total flux cleaned = 0.00854391 Jy ! Component: 950 - total flux cleaned = 0.00868365 Jy ! Component: 1000 - total flux cleaned = 0.00875205 Jy ! Component: 1050 - total flux cleaned = 0.00898916 Jy ! Component: 1100 - total flux cleaned = 0.00908784 Jy ! Component: 1150 - total flux cleaned = 0.00915296 Jy ! Component: 1200 - total flux cleaned = 0.00918577 Jy ! Component: 1250 - total flux cleaned = 0.00937448 Jy ! Component: 1300 - total flux cleaned = 0.00937444 Jy ! Component: 1350 - total flux cleaned = 0.00949606 Jy ! Component: 1400 - total flux cleaned = 0.00931588 Jy ! Component: 1450 - total flux cleaned = 0.00934598 Jy ! Component: 1500 - total flux cleaned = 0.00925815 Jy ! Component: 1550 - total flux cleaned = 0.00937354 Jy ! Component: 1600 - total flux cleaned = 0.00925905 Jy ! Component: 1650 - total flux cleaned = 0.00925951 Jy ! Component: 1700 - total flux cleaned = 0.00925943 Jy ! Component: 1750 - total flux cleaned = 0.00920479 Jy ! Component: 1800 - total flux cleaned = 0.00920483 Jy ! Component: 1850 - total flux cleaned = 0.00923114 Jy ! Component: 1900 - total flux cleaned = 0.00920456 Jy ! Component: 1950 - total flux cleaned = 0.00917892 Jy ! Component: 2000 - total flux cleaned = 0.00915348 Jy ! Component: 2050 - total flux cleaned = 0.0092044 Jy ! Component: 2100 - total flux cleaned = 0.00915417 Jy ! Component: 2150 - total flux cleaned = 0.00917953 Jy ! Component: 2200 - total flux cleaned = 0.00917991 Jy ! Component: 2250 - total flux cleaned = 0.00922816 Jy ! Component: 2300 - total flux cleaned = 0.00917981 Jy ! Component: 2350 - total flux cleaned = 0.00908503 Jy ! Component: 2400 - total flux cleaned = 0.00915537 Jy ! Component: 2450 - total flux cleaned = 0.00901604 Jy ! Component: 2500 - total flux cleaned = 0.00897011 Jy ! Component: 2550 - total flux cleaned = 0.00894751 Jy ! Component: 2600 - total flux cleaned = 0.0089251 Jy ! Component: 2650 - total flux cleaned = 0.00901418 Jy ! Component: 2700 - total flux cleaned = 0.00894809 Jy ! Component: 2750 - total flux cleaned = 0.00899155 Jy ! Component: 2800 - total flux cleaned = 0.00894818 Jy ! Component: 2850 - total flux cleaned = 0.00896971 Jy ! Component: 2900 - total flux cleaned = 0.00894866 Jy ! Component: 2950 - total flux cleaned = 0.00896985 Jy ! Component: 3000 - total flux cleaned = 0.00901156 Jy ! Component: 3050 - total flux cleaned = 0.00903226 Jy ! Component: 3100 - total flux cleaned = 0.00905258 Jy ! Component: 3150 - total flux cleaned = 0.00897124 Jy ! Component: 3200 - total flux cleaned = 0.0089713 Jy ! Component: 3250 - total flux cleaned = 0.00899122 Jy ! Component: 3300 - total flux cleaned = 0.00883296 Jy ! Component: 3350 - total flux cleaned = 0.00883282 Jy ! Component: 3400 - total flux cleaned = 0.00877464 Jy ! Component: 3450 - total flux cleaned = 0.00869761 Jy ! Component: 3500 - total flux cleaned = 0.0087358 Jy ! Component: 3550 - total flux cleaned = 0.00860302 Jy ! Component: 3600 - total flux cleaned = 0.00856566 Jy ! Component: 3650 - total flux cleaned = 0.00858425 Jy ! Component: 3700 - total flux cleaned = 0.00849175 Jy ! Component: 3750 - total flux cleaned = 0.00847323 Jy ! Component: 3800 - total flux cleaned = 0.00840085 Jy ! Component: 3850 - total flux cleaned = 0.00831083 Jy ! Component: 3900 - total flux cleaned = 0.00829301 Jy ! Component: 3950 - total flux cleaned = 0.00823954 Jy ! Component: 4000 - total flux cleaned = 0.00820402 Jy ! Component: 4050 - total flux cleaned = 0.00811639 Jy ! Total flux subtracted in 4096 components = 0.00808171 Jy ! Clean residual min=-0.000964 max=0.000980 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.138602 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 430 components and 0.138602 Jy ![Exited script file: muppet] wmap "J0706-2311_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.974 at -6.125 degrees (North through East) ! Clean map min=-0.0034394 max=0.063886 Jy/beam ! Writing clean map to FITS file: J0706-2311_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0638859 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000316309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48535 1.48535 2.97069 5.94138 11.8828 23.7655 47.5311 95.0621 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.974 at -6.125 degrees (North through East) ! Clean map min=-0.0034394 max=0.063886 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0706-2311_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:45:00 2019