! Started logfile: J0704-1307_S_2017_06_15_pus_uvs.log on Tue May 7 15:13:14 2019 obs J0704-1307_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0704-1307_S_2017_06_15_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.840468 visibilities/baseline/integration-bin. ! Found source: J0704-1307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 14372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0704-1307_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982897Jy sigma=0.007497 ! Fit after self-cal, rms=0.949105Jy sigma=0.007268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=6.991 mas, bpa=-4.656 degrees ! Estimated noise=1403.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399695 Jy ! Component: 100 - total flux cleaned = 0.0506637 Jy ! Total flux subtracted in 100 components = 0.0506637 Jy ! Clean residual min=-0.006503 max=0.006886 Jy/beam ! Clean residual mean=-0.000050 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.0506637 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0506637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091144Jy sigma=0.000669 ! Fit after self-cal, rms=0.090437Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.216 mas, bpa=-5.262 degrees ! Estimated noise=946.934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103956 Jy ! Component: 100 - total flux cleaned = 0.0162154 Jy ! Component: 150 - total flux cleaned = 0.0201674 Jy ! Component: 200 - total flux cleaned = 0.022946 Jy ! Total flux subtracted in 200 components = 0.022946 Jy ! Clean residual min=-0.003354 max=0.003197 Jy/beam ! Clean residual mean=-0.000034 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0736097 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 50 components and 0.0736097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089260Jy sigma=0.000654 ! Fit after self-cal, rms=0.089174Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 1.04 KP 1.01 ! LA 0.91 MK 1.06 NL 1.05 OV 0.97 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.93 HN 1.01 KP 0.95 ! LA 0.91 MK 1.13 NL 1.08 OV 1.07 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.87 HN 1.10 KP 1.09 ! LA 0.93 MK 1.06 NL 1.00 OV 0.98 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.79 KP 1.00* ! LA 1.00 MK 0.62 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.089174Jy sigma=0.000652 ! Fit after self-cal, rms=0.089290Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.357 mas, bpa=-5.068 degrees ! Estimated noise=933.477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251638 Jy ! Component: 100 - total flux cleaned = 0.00317666 Jy ! Component: 150 - total flux cleaned = 0.00332311 Jy ! Component: 200 - total flux cleaned = 0.00336606 Jy ! Total flux subtracted in 200 components = 0.00336606 Jy ! Clean residual min=-0.002919 max=0.003090 Jy/beam ! Clean residual mean=-0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0769758 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.0769758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089192Jy sigma=0.000650 ! Fit after self-cal, rms=0.089289Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089289Jy sigma=0.000650 ! Fit after self-cal, rms=0.089181Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.244 mas, bpa=-5.111 degrees ! Estimated noise=933.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182584 Jy ! Component: 100 - total flux cleaned = 0.00210415 Jy ! Component: 150 - total flux cleaned = 0.0021849 Jy ! Component: 200 - total flux cleaned = 0.00225862 Jy ! Total flux subtracted in 200 components = 0.00225862 Jy ! Clean residual min=-0.002785 max=0.002450 Jy/beam ! Clean residual mean=-0.000004 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0792344 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.0792344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089127Jy sigma=0.000648 ! Fit after self-cal, rms=0.089148Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654473 Jy ! Component: 100 - total flux cleaned = 0.000613267 Jy ! Component: 150 - total flux cleaned = 0.000574475 Jy ! Component: 200 - total flux cleaned = 0.000609272 Jy ! Total flux subtracted in 200 components = 0.000609272 Jy ! Clean residual min=-0.002629 max=0.002555 Jy/beam ! Clean residual mean=-0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0798437 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.0798437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089107Jy sigma=0.000648 ! Fit after self-cal, rms=0.089095Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089095Jy sigma=0.000648 ! Fit after self-cal, rms=0.088139Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.141 mas, bpa=-4.98 degrees ! Estimated noise=925.325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134435 Jy ! Component: 100 - total flux cleaned = 0.0015818 Jy ! Component: 150 - total flux cleaned = 0.00161639 Jy ! Component: 200 - total flux cleaned = 0.00161749 Jy ! Total flux subtracted in 200 components = 0.00161749 Jy ! Clean residual min=-0.002563 max=0.002532 Jy/beam ! Clean residual mean=-0.000005 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0814611 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.0814611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088105Jy sigma=0.000647 ! Fit after self-cal, rms=0.088094Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -119.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226836 Jy ! Component: 100 - total flux cleaned = 0.00349448 Jy ! Component: 150 - total flux cleaned = 0.00426517 Jy ! Component: 200 - total flux cleaned = 0.00450213 Jy ! Total flux subtracted in 200 components = 0.00450213 Jy ! Clean residual min=-0.002351 max=0.002515 Jy/beam ! Clean residual mean=-0.000000 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0859633 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 0.0859633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088031Jy sigma=0.000647 ! Fit after self-cal, rms=0.088016Jy sigma=0.000646 ! Inverting map ! Added new window around map position (25.5, -100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224822 Jy ! Component: 100 - total flux cleaned = 0.00298152 Jy ! Component: 150 - total flux cleaned = 0.00354534 Jy ! Component: 200 - total flux cleaned = 0.00407825 Jy ! Total flux subtracted in 200 components = 0.00407825 Jy ! Clean residual min=-0.002257 max=0.002050 Jy/beam ! Clean residual mean=-0.000006 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0900415 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.0900415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087941Jy sigma=0.000646 ! Fit after self-cal, rms=0.087921Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087921Jy sigma=0.000646 ! Fit after self-cal, rms=0.087351Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=14.85 mas, bpa=-2.052 degrees ! Estimated noise=1161.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155424 Jy ! Component: 100 - total flux cleaned = 0.00256804 Jy ! Component: 150 - total flux cleaned = 0.00305685 Jy ! Component: 200 - total flux cleaned = 0.00340532 Jy ! Total flux subtracted in 200 components = 0.00340532 Jy ! Clean residual min=-0.001760 max=0.001713 Jy/beam ! Clean residual mean=-0.000012 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0934468 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 0.0934468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087329Jy sigma=0.000645 ! Fit after self-cal, rms=0.087332Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471915 Jy ! Component: 100 - total flux cleaned = 0.000777719 Jy ! Component: 150 - total flux cleaned = 0.000959698 Jy ! Component: 200 - total flux cleaned = 0.00109731 Jy ! Total flux subtracted in 200 components = 0.00109731 Jy ! Clean residual min=-0.001628 max=0.001695 Jy/beam ! Clean residual mean=-0.000008 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0945442 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 169 components and 0.0945442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087324Jy sigma=0.000645 ! Fit after self-cal, rms=0.087318Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=8.097 mas, bpa=-4.954 degrees ! Estimated noise=916.431 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 8.097 at -4.954 degrees (North through East) ! Clean map min=-0.0021164 max=0.050007 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.9 mas, bpa=-4.433 degrees ! Estimated noise=1352.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380172 Jy ! Component: 100 - total flux cleaned = 0.051181 Jy ! Component: 150 - total flux cleaned = 0.0599674 Jy ! Component: 200 - total flux cleaned = 0.0649291 Jy ! Total flux subtracted in 200 components = 0.0649291 Jy ! Clean residual min=-0.005244 max=0.004985 Jy/beam ! Clean residual mean=-0.000029 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.0649291 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0649291 Jy ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=8.097 mas, bpa=-4.954 degrees ! Estimated noise=916.431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678991 Jy ! Component: 100 - total flux cleaned = 0.0112051 Jy ! Component: 150 - total flux cleaned = 0.0147784 Jy ! Component: 200 - total flux cleaned = 0.0177417 Jy ! Total flux subtracted in 200 components = 0.0177417 Jy ! Clean residual min=-0.002874 max=0.002371 Jy/beam ! Clean residual mean=-0.000018 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0826708 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.0826708 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.411 mas, bmaj=14.85 mas, bpa=-2.052 degrees ! Estimated noise=1161.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357374 Jy ! Component: 100 - total flux cleaned = 0.00621538 Jy ! Component: 150 - total flux cleaned = 0.00823822 Jy ! Component: 200 - total flux cleaned = 0.00952109 Jy ! Total flux subtracted in 200 components = 0.00952109 Jy ! Clean residual min=-0.002062 max=0.001866 Jy/beam ! Clean residual mean=-0.000014 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0921919 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100514 Jy ! Component: 100 - total flux cleaned = 0.00168046 Jy ! Component: 150 - total flux cleaned = 0.00218376 Jy ! Component: 200 - total flux cleaned = 0.00262917 Jy ! Total flux subtracted in 200 components = 0.00262917 Jy ! Clean residual min=-0.001841 max=0.001813 Jy/beam ! Clean residual mean=-0.000008 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.094821 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 108 components and 0.094821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=8.097 mas, bpa=-4.954 degrees ! Estimated noise=916.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476991 Jy ! Component: 100 - total flux cleaned = 0.00100256 Jy ! Component: 150 - total flux cleaned = 0.00140225 Jy ! Component: 200 - total flux cleaned = 0.00165429 Jy ! Total flux subtracted in 200 components = 0.00165429 Jy ! Clean residual min=-0.002475 max=0.002061 Jy/beam ! Clean residual mean=-0.000003 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0964753 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.0964753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087319Jy sigma=0.000645 ! Fit after self-cal, rms=0.087282Jy sigma=0.000645 wmodel J0704-1307_S_2017_06_15_pus_map.mod ! Writing 125 model components to file: J0704-1307_S_2017_06_15_pus_map.mod wobs J0704-1307_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0704-1307_S_2017_06_15_pus_uvs.fits wwins J0704-1307_S_2017_06_15_pus_map.win ! wwins: Wrote 5 windows to J0704-1307_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059881 Jy ! Component: 100 - total flux cleaned = -0.000961967 Jy ! Component: 150 - total flux cleaned = -0.00103131 Jy ! Component: 200 - total flux cleaned = -0.00122623 Jy ! Component: 250 - total flux cleaned = -0.00131983 Jy ! Component: 300 - total flux cleaned = -0.00138012 Jy ! Component: 350 - total flux cleaned = -0.00149725 Jy ! Component: 400 - total flux cleaned = -0.0014972 Jy ! Component: 450 - total flux cleaned = -0.00158038 Jy ! Component: 500 - total flux cleaned = -0.0016076 Jy ! Component: 550 - total flux cleaned = -0.00166048 Jy ! Component: 600 - total flux cleaned = -0.00165998 Jy ! Component: 650 - total flux cleaned = -0.00166003 Jy ! Component: 700 - total flux cleaned = -0.00163555 Jy ! Component: 750 - total flux cleaned = -0.00156306 Jy ! Component: 800 - total flux cleaned = -0.00156337 Jy ! Component: 850 - total flux cleaned = -0.00149363 Jy ! Component: 900 - total flux cleaned = -0.00144804 Jy ! Component: 950 - total flux cleaned = -0.00142518 Jy ! Component: 1000 - total flux cleaned = -0.00133629 Jy ! Component: 1050 - total flux cleaned = -0.00133654 Jy ! Component: 1100 - total flux cleaned = -0.00122871 Jy ! Component: 1150 - total flux cleaned = -0.0011016 Jy ! Component: 1200 - total flux cleaned = -0.00093401 Jy ! Component: 1250 - total flux cleaned = -0.000726994 Jy ! Component: 1300 - total flux cleaned = -0.000584324 Jy ! Component: 1350 - total flux cleaned = -0.000423568 Jy ! Component: 1400 - total flux cleaned = -0.000304224 Jy ! Component: 1450 - total flux cleaned = -0.000127099 Jy ! Component: 1500 - total flux cleaned = 8.68477e-05 Jy ! Component: 1550 - total flux cleaned = 0.00027893 Jy ! Component: 1600 - total flux cleaned = 0.000449764 Jy ! Component: 1650 - total flux cleaned = 0.000524872 Jy ! Component: 1700 - total flux cleaned = 0.000747817 Jy ! Component: 1750 - total flux cleaned = 0.000894818 Jy ! Component: 1800 - total flux cleaned = 0.000967342 Jy ! Component: 1850 - total flux cleaned = 0.00111123 Jy ! Component: 1900 - total flux cleaned = 0.00120021 Jy ! Component: 1950 - total flux cleaned = 0.00137657 Jy ! Component: 2000 - total flux cleaned = 0.00149868 Jy ! Component: 2050 - total flux cleaned = 0.00165392 Jy ! Component: 2100 - total flux cleaned = 0.00177353 Jy ! Component: 2150 - total flux cleaned = 0.00184126 Jy ! Component: 2200 - total flux cleaned = 0.00199206 Jy ! Component: 2250 - total flux cleaned = 0.00210856 Jy ! Component: 2300 - total flux cleaned = 0.00227284 Jy ! Component: 2350 - total flux cleaned = 0.00235442 Jy ! Component: 2400 - total flux cleaned = 0.00251608 Jy ! Component: 2450 - total flux cleaned = 0.00264428 Jy ! Component: 2500 - total flux cleaned = 0.00277141 Jy ! Component: 2550 - total flux cleaned = 0.00288186 Jy ! Component: 2600 - total flux cleaned = 0.00299135 Jy ! Component: 2650 - total flux cleaned = 0.00309981 Jy ! Component: 2700 - total flux cleaned = 0.00322274 Jy ! Component: 2750 - total flux cleaned = 0.00331421 Jy ! Component: 2800 - total flux cleaned = 0.00335951 Jy ! Component: 2850 - total flux cleaned = 0.00344986 Jy ! Component: 2900 - total flux cleaned = 0.00356906 Jy ! Component: 2950 - total flux cleaned = 0.00367268 Jy ! Component: 3000 - total flux cleaned = 0.00374621 Jy ! Component: 3050 - total flux cleaned = 0.00378993 Jy ! Component: 3100 - total flux cleaned = 0.00392019 Jy ! Component: 3150 - total flux cleaned = 0.00393438 Jy ! Component: 3200 - total flux cleaned = 0.00402018 Jy ! Component: 3250 - total flux cleaned = 0.00414793 Jy ! Component: 3300 - total flux cleaned = 0.00420432 Jy ! Component: 3350 - total flux cleaned = 0.0042463 Jy ! Component: 3400 - total flux cleaned = 0.00428806 Jy ! Component: 3450 - total flux cleaned = 0.00438482 Jy ! Component: 3500 - total flux cleaned = 0.00445345 Jy ! Component: 3550 - total flux cleaned = 0.00448075 Jy ! Component: 3600 - total flux cleaned = 0.00453503 Jy ! Component: 3650 - total flux cleaned = 0.00458902 Jy ! Component: 3700 - total flux cleaned = 0.00460256 Jy ! Component: 3750 - total flux cleaned = 0.00469566 Jy ! Component: 3800 - total flux cleaned = 0.00474865 Jy ! Component: 3850 - total flux cleaned = 0.00480116 Jy ! Component: 3900 - total flux cleaned = 0.00484039 Jy ! Component: 3950 - total flux cleaned = 0.00487935 Jy ! Component: 4000 - total flux cleaned = 0.00493109 Jy ! Component: 4050 - total flux cleaned = 0.00494385 Jy ! Total flux subtracted in 4096 components = 0.00498211 Jy ! Clean residual min=-0.000638 max=0.000764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.101457 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 402 components and 0.101457 Jy ![Exited script file: muppet] wmap "J0704-1307_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 8.097 at -4.954 degrees (North through East) ! Clean map min=-0.0017782 max=0.049963 Jy/beam ! Writing clean map to FITS file: J0704-1307_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0499633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224237 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34641 1.34641 2.69282 5.38564 10.7713 21.5426 43.0852 86.1703 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 8.097 at -4.954 degrees (North through East) ! Clean map min=-0.0017782 max=0.049963 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0704-1307_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:13:19 2019