! Started logfile: J0700+1709_S_2017_09_26_pus_uvs.log on Sat May 11 12:56:18 2019 obs J0700+1709_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0700+1709_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.621795 visibilities/baseline/integration-bin. ! Found source: J0700+1709 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0700+1709_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.398662Jy sigma=0.003513 ! Fit after self-cal, rms=0.390200Jy sigma=0.003444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=9.762 mas, bpa=-30.89 degrees ! Estimated noise=2441.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.49832 Jy ! Component: 100 - total flux cleaned = 0.617362 Jy ! Total flux subtracted in 100 components = 0.617362 Jy ! Clean residual min=-0.033400 max=0.051610 Jy/beam ! Clean residual mean=-0.000262 rms=0.010802 Jy/beam ! Combined flux in latest and established models = 0.617362 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.617362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186908Jy sigma=0.001558 ! Fit after self-cal, rms=0.186913Jy sigma=0.001557 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.733 mas, bmaj=10.08 mas, bpa=-31.4 degrees ! Estimated noise=1861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658502 Jy ! Component: 100 - total flux cleaned = 0.100801 Jy ! Component: 150 - total flux cleaned = 0.121279 Jy ! Component: 200 - total flux cleaned = 0.132125 Jy ! Total flux subtracted in 200 components = 0.132125 Jy ! Clean residual min=-0.029061 max=0.033462 Jy/beam ! Clean residual mean=-0.000236 rms=0.008834 Jy/beam ! Combined flux in latest and established models = 0.749487 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 0.749487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164142Jy sigma=0.001329 ! Fit after self-cal, rms=0.163781Jy sigma=0.001325 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.94 KP 1.03 ! LA 0.97 MK 0.96 NL 0.87 OV 1.00 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.99 KP 0.98 ! LA 0.94 MK 0.98 NL 1.23 OV 1.00 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.98 KP 0.98 ! LA 0.96 MK 1.04 NL 1.32 OV 0.99 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00* ! LA 0.97 MK 1.12 NL 1.00* OV 1.35 ! PT 1.01 ! ! ! Fit before self-cal, rms=0.163781Jy sigma=0.001325 ! Fit after self-cal, rms=0.167475Jy sigma=0.001103 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.752 mas, bmaj=10.01 mas, bpa=-31.11 degrees ! Estimated noise=1853.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000812908 Jy ! Component: 100 - total flux cleaned = -0.0031047 Jy ! Component: 150 - total flux cleaned = -0.00423652 Jy ! Component: 200 - total flux cleaned = -0.00460651 Jy ! Total flux subtracted in 200 components = -0.00460651 Jy ! Clean residual min=-0.024439 max=0.025913 Jy/beam ! Clean residual mean=-0.000066 rms=0.006997 Jy/beam ! Combined flux in latest and established models = 0.744881 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.744881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166411Jy sigma=0.001097 ! Fit after self-cal, rms=0.166532Jy sigma=0.001096 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166532Jy sigma=0.001096 ! Fit after self-cal, rms=0.172423Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.764 mas, bmaj=9.983 mas, bpa=-30.63 degrees ! Estimated noise=1853.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00342756 Jy ! Component: 100 - total flux cleaned = -0.00360241 Jy ! Component: 150 - total flux cleaned = -0.00360348 Jy ! Component: 200 - total flux cleaned = -0.00373744 Jy ! Total flux subtracted in 200 components = -0.00373744 Jy ! Clean residual min=-0.006905 max=0.010454 Jy/beam ! Clean residual mean=-0.000050 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.741143 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.741143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172059Jy sigma=0.000688 ! Fit after self-cal, rms=0.172433Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00707867 Jy ! Component: 100 - total flux cleaned = 0.00567489 Jy ! Component: 150 - total flux cleaned = 0.00523613 Jy ! Component: 200 - total flux cleaned = 0.00505197 Jy ! Total flux subtracted in 200 components = 0.00505197 Jy ! Clean residual min=-0.006383 max=0.005039 Jy/beam ! Clean residual mean=-0.000039 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.746195 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.746195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172029Jy sigma=0.000679 ! Fit after self-cal, rms=0.172165Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172165Jy sigma=0.000679 ! Fit after self-cal, rms=0.174139Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.753 mas, bmaj=9.985 mas, bpa=-30.55 degrees ! Estimated noise=1850.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.02961e-05 Jy ! Component: 100 - total flux cleaned = -0.000102894 Jy ! Component: 150 - total flux cleaned = -0.000380299 Jy ! Component: 200 - total flux cleaned = -0.000709488 Jy ! Total flux subtracted in 200 components = -0.000709488 Jy ! Clean residual min=-0.005798 max=0.004047 Jy/beam ! Clean residual mean=-0.000030 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.745486 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.745486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173990Jy sigma=0.000675 ! Fit after self-cal, rms=0.174000Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105747 Jy ! Component: 100 - total flux cleaned = -0.000154521 Jy ! Component: 150 - total flux cleaned = -0.000272632 Jy ! Component: 200 - total flux cleaned = -0.000382293 Jy ! Total flux subtracted in 200 components = -0.000382293 Jy ! Clean residual min=-0.005630 max=0.004001 Jy/beam ! Clean residual mean=-0.000031 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.745103 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 0.745103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173937Jy sigma=0.000675 ! Fit after self-cal, rms=0.173950Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173950Jy sigma=0.000675 ! Fit after self-cal, rms=0.173882Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.947 mas, bmaj=11.7 mas, bpa=-19.33 degrees ! Estimated noise=2078.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112833 Jy ! Component: 100 - total flux cleaned = -0.00134818 Jy ! Component: 150 - total flux cleaned = -0.00155846 Jy ! Component: 200 - total flux cleaned = -0.00173067 Jy ! Total flux subtracted in 200 components = -0.00173067 Jy ! Clean residual min=-0.005584 max=0.003832 Jy/beam ! Clean residual mean=-0.000043 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.743373 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 124 components and 0.743373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173851Jy sigma=0.000674 ! Fit after self-cal, rms=0.173870Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.91998e-05 Jy ! Component: 100 - total flux cleaned = -0.000184625 Jy ! Component: 150 - total flux cleaned = -0.000266443 Jy ! Component: 200 - total flux cleaned = -0.000369557 Jy ! Total flux subtracted in 200 components = -0.000369557 Jy ! Clean residual min=-0.005517 max=0.003886 Jy/beam ! Clean residual mean=-0.000045 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.743003 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 132 components and 0.743003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173851Jy sigma=0.000673 ! Fit after self-cal, rms=0.173852Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.748 mas, bmaj=9.985 mas, bpa=-30.48 degrees ! Estimated noise=1848.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.748 x 9.985 at -30.48 degrees (North through East) ! Clean map min=-0.005196 max=0.63421 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173852Jy sigma=0.000673 ! Fit after self-cal, rms=0.354463Jy sigma=0.000601 ! Inverting map and beam ! Estimated beam: bmin=4.744 mas, bmaj=9.985 mas, bpa=-30.45 degrees ! Estimated noise=1847.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000916317 Jy ! Component: 100 - total flux cleaned = -0.000913231 Jy ! Component: 150 - total flux cleaned = -0.00084918 Jy ! Component: 200 - total flux cleaned = -0.000739777 Jy ! Total flux subtracted in 200 components = -0.000739777 Jy ! Clean residual min=-0.004937 max=0.003584 Jy/beam ! Clean residual mean=-0.000021 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.742263 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.742263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354379Jy sigma=0.000600 ! Fit after self-cal, rms=0.354453Jy sigma=0.000600 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96545e-05 Jy ! Component: 100 - total flux cleaned = -0.000143032 Jy ! Component: 150 - total flux cleaned = -0.000185169 Jy ! Component: 200 - total flux cleaned = -0.000184641 Jy ! Total flux subtracted in 200 components = -0.000184641 Jy ! Clean residual min=-0.004813 max=0.003527 Jy/beam ! Clean residual mean=-0.000022 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.742079 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 0.742079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354415Jy sigma=0.000600 ! Fit after self-cal, rms=0.354466Jy sigma=0.000600 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354466Jy sigma=0.000600 ! Fit after self-cal, rms=0.353869Jy sigma=0.000599 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=9.672 mas, bpa=-30.1 degrees ! Estimated noise=2403.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.490325 Jy ! Component: 100 - total flux cleaned = 0.60695 Jy ! Component: 150 - total flux cleaned = 0.656694 Jy ! Component: 200 - total flux cleaned = 0.687431 Jy ! Total flux subtracted in 200 components = 0.687431 Jy ! Clean residual min=-0.009303 max=0.016053 Jy/beam ! Clean residual mean=-0.000066 rms=0.003083 Jy/beam ! Combined flux in latest and established models = 0.687431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.687431 Jy ! Inverting map and beam ! Estimated beam: bmin=4.742 mas, bmaj=9.983 mas, bpa=-30.4 degrees ! Estimated noise=1846.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246634 Jy ! Component: 100 - total flux cleaned = 0.0384519 Jy ! Component: 150 - total flux cleaned = 0.0467982 Jy ! Component: 200 - total flux cleaned = 0.0522026 Jy ! Total flux subtracted in 200 components = 0.0522026 Jy ! Clean residual min=-0.004816 max=0.004247 Jy/beam ! Clean residual mean=-0.000023 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.739633 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 65 components and 0.739633 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.936 mas, bmaj=11.71 mas, bpa=-19.05 degrees ! Estimated noise=2078.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331738 Jy ! Component: 100 - total flux cleaned = 0.00364656 Jy ! Component: 150 - total flux cleaned = 0.00374455 Jy ! Component: 200 - total flux cleaned = 0.00374716 Jy ! Total flux subtracted in 200 components = 0.00374716 Jy ! Clean residual min=-0.005214 max=0.003627 Jy/beam ! Clean residual mean=-0.000024 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.74338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.2549e-05 Jy ! Component: 100 - total flux cleaned = -0.000227136 Jy ! Component: 150 - total flux cleaned = -0.000377797 Jy ! Component: 200 - total flux cleaned = -0.000518601 Jy ! Total flux subtracted in 200 components = -0.000518601 Jy ! Clean residual min=-0.004976 max=0.003525 Jy/beam ! Clean residual mean=-0.000027 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.742862 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 127 components and 0.742862 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.742 mas, bmaj=9.983 mas, bpa=-30.4 degrees ! Estimated noise=1846.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466196 Jy ! Component: 100 - total flux cleaned = -0.000543676 Jy ! Component: 150 - total flux cleaned = -0.00066641 Jy ! Component: 200 - total flux cleaned = -0.000832242 Jy ! Total flux subtracted in 200 components = -0.000832242 Jy ! Clean residual min=-0.004283 max=0.003527 Jy/beam ! Clean residual mean=-0.000019 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.74203 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 141 components and 0.74203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353759Jy sigma=0.000600 ! Fit after self-cal, rms=0.353703Jy sigma=0.000599 wmodel J0700+1709_S_2017_09_26_pus_map.mod ! Writing 141 model components to file: J0700+1709_S_2017_09_26_pus_map.mod wobs J0700+1709_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0700+1709_S_2017_09_26_pus_uvs.fits wwins J0700+1709_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0700+1709_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171585 Jy ! Component: 100 - total flux cleaned = -0.0023353 Jy ! Component: 150 - total flux cleaned = -0.00303662 Jy ! Component: 200 - total flux cleaned = -0.00353278 Jy ! Component: 250 - total flux cleaned = -0.00384953 Jy ! Component: 300 - total flux cleaned = -0.00420328 Jy ! Component: 350 - total flux cleaned = -0.00449317 Jy ! Component: 400 - total flux cleaned = -0.00491312 Jy ! Component: 450 - total flux cleaned = -0.00513783 Jy ! Component: 500 - total flux cleaned = -0.00548634 Jy ! Component: 550 - total flux cleaned = -0.00590798 Jy ! Component: 600 - total flux cleaned = -0.00615404 Jy ! Component: 650 - total flux cleaned = -0.00647322 Jy ! Component: 700 - total flux cleaned = -0.00674505 Jy ! Component: 750 - total flux cleaned = -0.00693435 Jy ! Component: 800 - total flux cleaned = -0.00722935 Jy ! Component: 850 - total flux cleaned = -0.00737309 Jy ! Component: 900 - total flux cleaned = -0.00747879 Jy ! Component: 950 - total flux cleaned = -0.00765131 Jy ! Component: 1000 - total flux cleaned = -0.00775224 Jy ! Component: 1050 - total flux cleaned = -0.00788447 Jy ! Component: 1100 - total flux cleaned = -0.00801401 Jy ! Component: 1150 - total flux cleaned = -0.00810912 Jy ! Component: 1200 - total flux cleaned = -0.00817134 Jy ! Component: 1250 - total flux cleaned = -0.00820246 Jy ! Component: 1300 - total flux cleaned = -0.00829238 Jy ! Component: 1350 - total flux cleaned = -0.0083511 Jy ! Component: 1400 - total flux cleaned = -0.00843759 Jy ! Component: 1450 - total flux cleaned = -0.00843731 Jy ! Component: 1500 - total flux cleaned = -0.00849324 Jy ! Component: 1550 - total flux cleaned = -0.00852045 Jy ! Component: 1600 - total flux cleaned = -0.00857468 Jy ! Component: 1650 - total flux cleaned = -0.00865512 Jy ! Component: 1700 - total flux cleaned = -0.0087074 Jy ! Component: 1750 - total flux cleaned = -0.00878524 Jy ! Component: 1800 - total flux cleaned = -0.00881095 Jy ! Component: 1850 - total flux cleaned = -0.00886175 Jy ! Component: 1900 - total flux cleaned = -0.00901219 Jy ! Component: 1950 - total flux cleaned = -0.00898743 Jy ! Component: 2000 - total flux cleaned = -0.00901189 Jy ! Component: 2050 - total flux cleaned = -0.00906055 Jy ! Component: 2100 - total flux cleaned = -0.00913224 Jy ! Component: 2150 - total flux cleaned = -0.00915565 Jy ! Component: 2200 - total flux cleaned = -0.00920237 Jy ! Component: 2250 - total flux cleaned = -0.00922546 Jy ! Component: 2300 - total flux cleaned = -0.00924836 Jy ! Component: 2350 - total flux cleaned = -0.00931602 Jy ! Component: 2400 - total flux cleaned = -0.00938297 Jy ! Component: 2450 - total flux cleaned = -0.00940526 Jy ! Component: 2500 - total flux cleaned = -0.00944905 Jy ! Component: 2550 - total flux cleaned = -0.00947075 Jy ! Component: 2600 - total flux cleaned = -0.00955667 Jy ! Component: 2650 - total flux cleaned = -0.00953513 Jy ! Component: 2700 - total flux cleaned = -0.00955648 Jy ! Component: 2750 - total flux cleaned = -0.00955622 Jy ! Component: 2800 - total flux cleaned = -0.00957683 Jy ! Component: 2850 - total flux cleaned = -0.00951486 Jy ! Component: 2900 - total flux cleaned = -0.00951492 Jy ! Component: 2950 - total flux cleaned = -0.00953531 Jy ! Component: 3000 - total flux cleaned = -0.00949484 Jy ! Component: 3050 - total flux cleaned = -0.00951506 Jy ! Component: 3100 - total flux cleaned = -0.00947489 Jy ! Component: 3150 - total flux cleaned = -0.00947492 Jy ! Component: 3200 - total flux cleaned = -0.00947492 Jy ! Component: 3250 - total flux cleaned = -0.00947488 Jy ! Component: 3300 - total flux cleaned = -0.00949429 Jy ! Component: 3350 - total flux cleaned = -0.00945518 Jy ! Component: 3400 - total flux cleaned = -0.0094358 Jy ! Component: 3450 - total flux cleaned = -0.00939718 Jy ! Component: 3500 - total flux cleaned = -0.00941641 Jy ! Component: 3550 - total flux cleaned = -0.00937809 Jy ! Component: 3600 - total flux cleaned = -0.00941624 Jy ! Component: 3650 - total flux cleaned = -0.00935911 Jy ! Component: 3700 - total flux cleaned = -0.0093591 Jy ! Component: 3750 - total flux cleaned = -0.00935906 Jy ! Component: 3800 - total flux cleaned = -0.00932157 Jy ! Component: 3850 - total flux cleaned = -0.00932155 Jy ! Component: 3900 - total flux cleaned = -0.00934013 Jy ! Component: 3950 - total flux cleaned = -0.00932163 Jy ! Component: 4000 - total flux cleaned = -0.00932153 Jy ! Component: 4050 - total flux cleaned = -0.00935853 Jy ! Total flux subtracted in 4096 components = -0.00932159 Jy ! Clean residual min=-0.001006 max=0.001199 Jy/beam ! Clean residual mean=0.000004 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.732708 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 427 components and 0.732708 Jy ![Exited script file: muppet] wmap "J0700+1709_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.742 x 9.983 at -30.4 degrees (North through East) ! Clean map min=-0.0032322 max=0.6359 Jy/beam ! Writing clean map to FITS file: J0700+1709_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.635898 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324087 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152896 0.152896 0.305792 0.611584 1.22317 2.44634 4.89267 9.78535 19.5707 39.1414 78.2828 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.635 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.742 x 9.983 at -30.4 degrees (North through East) ! Clean map min=-0.0032322 max=0.6359 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0700+1709_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:56:23 2019