! Started logfile: J0659+0813_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:41:14 2019 obs J0659+0813_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0659+0813_S_2017_05_31_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.122222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0659+0813 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 396 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0659+0813_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.621526Jy sigma=0.004621 ! Fit after self-cal, rms=0.590530Jy sigma=0.004458 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=9.284 mas, bpa=37.17 degrees ! Estimated noise=7559.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407874 Jy ! Component: 100 - total flux cleaned = 0.505701 Jy ! Total flux subtracted in 100 components = 0.505701 Jy ! Clean residual min=-0.096332 max=0.094882 Jy/beam ! Clean residual mean=-0.000011 rms=0.038609 Jy/beam ! Combined flux in latest and established models = 0.505701 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.505701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.481620Jy sigma=0.001280 ! Fit after self-cal, rms=0.481636Jy sigma=0.001272 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=9.946 mas, bpa=35.6 degrees ! Estimated noise=6524.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698475 Jy ! Component: 100 - total flux cleaned = 0.0700588 Jy ! Component: 150 - total flux cleaned = 0.0645055 Jy ! Component: 200 - total flux cleaned = 0.0744496 Jy ! Total flux subtracted in 200 components = 0.0744496 Jy ! Clean residual min=-0.039162 max=0.039507 Jy/beam ! Clean residual mean=-0.000008 rms=0.017145 Jy/beam ! Combined flux in latest and established models = 0.580151 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 66 components and 0.580151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363472Jy sigma=0.000896 ! Fit after self-cal, rms=0.362671Jy sigma=0.000892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.00* NL 0.97 OV 1.00* ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.00* NL 1.01 OV 1.00* ! PT 1.00* SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.362671Jy sigma=0.000892 ! Fit after self-cal, rms=0.142207Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=9.472 mas, bpa=32.28 degrees ! Estimated noise=7818.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374635 Jy ! Component: 100 - total flux cleaned = 0.00433497 Jy ! Component: 150 - total flux cleaned = 0.0039887 Jy ! Component: 200 - total flux cleaned = 0.00216497 Jy ! Total flux subtracted in 200 components = 0.00216497 Jy ! Clean residual min=-0.005902 max=0.005812 Jy/beam ! Clean residual mean=-0.000001 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.582316 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 110 components and 0.582316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133617Jy sigma=0.000626 ! Fit after self-cal, rms=0.131440Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131440Jy sigma=0.000623 ! Fit after self-cal, rms=0.130579Jy sigma=0.000621 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=9.486 mas, bpa=32.24 degrees ! Estimated noise=7821.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669091 Jy ! Component: 100 - total flux cleaned = 0.000955121 Jy ! Component: 150 - total flux cleaned = 0.00124638 Jy ! Component: 200 - total flux cleaned = 0.000262676 Jy ! Total flux subtracted in 200 components = 0.000262676 Jy ! Clean residual min=-0.002336 max=0.002369 Jy/beam ! Clean residual mean=-0.000000 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.582579 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 151 components and 0.582579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129968Jy sigma=0.000619 ! Fit after self-cal, rms=0.130011Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227967 Jy ! Component: 100 - total flux cleaned = 0.000648697 Jy ! Component: 150 - total flux cleaned = 0.000956734 Jy ! Component: 200 - total flux cleaned = 0.00139263 Jy ! Total flux subtracted in 200 components = 0.00139263 Jy ! Clean residual min=-0.001206 max=0.001182 Jy/beam ! Clean residual mean=-0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.583971 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 196 components and 0.583971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129842Jy sigma=0.000619 ! Fit after self-cal, rms=0.129875Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129875Jy sigma=0.000619 ! Fit after self-cal, rms=0.130129Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=9.489 mas, bpa=32.23 degrees ! Estimated noise=7826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000732409 Jy ! Component: 100 - total flux cleaned = -0.000634247 Jy ! Component: 150 - total flux cleaned = -0.000204778 Jy ! Component: 200 - total flux cleaned = 0.000271886 Jy ! Total flux subtracted in 200 components = 0.000271886 Jy ! Clean residual min=-0.000800 max=0.000798 Jy/beam ! Clean residual mean=-0.000000 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.584243 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 230 components and 0.584243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130070Jy sigma=0.000619 ! Fit after self-cal, rms=0.130115Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129535 Jy ! Component: 100 - total flux cleaned = -0.000196352 Jy ! Component: 150 - total flux cleaned = -0.000106412 Jy ! Component: 200 - total flux cleaned = 0.000104997 Jy ! Total flux subtracted in 200 components = 0.000104997 Jy ! Clean residual min=-0.000509 max=0.000506 Jy/beam ! Clean residual mean=0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.584348 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 273 components and 0.584348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130092Jy sigma=0.000619 ! Fit after self-cal, rms=0.130105Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130105Jy sigma=0.000619 ! Fit after self-cal, rms=0.130238Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.824 mas, bmaj=9.569 mas, bpa=26.92 degrees ! Estimated noise=8865.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.49051e-05 Jy ! Component: 100 - total flux cleaned = -0.000198918 Jy ! Component: 150 - total flux cleaned = -0.00020025 Jy ! Component: 200 - total flux cleaned = -0.000268297 Jy ! Total flux subtracted in 200 components = -0.000268297 Jy ! Clean residual min=-0.000158 max=0.000158 Jy/beam ! Clean residual mean=-0.000000 rms=0.000061 Jy/beam ! Combined flux in latest and established models = 0.58408 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 315 components and 0.58408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130235Jy sigma=0.000619 ! Fit after self-cal, rms=0.130241Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.26099e-05 Jy ! Component: 100 - total flux cleaned = 6.65102e-05 Jy ! Component: 150 - total flux cleaned = 0.00015988 Jy ! Component: 200 - total flux cleaned = 0.000266353 Jy ! Total flux subtracted in 200 components = 0.000266353 Jy ! Clean residual min=-0.000134 max=0.000135 Jy/beam ! Clean residual mean=-0.000000 rms=0.000041 Jy/beam ! Combined flux in latest and established models = 0.584346 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 339 components and 0.584346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130240Jy sigma=0.000619 ! Fit after self-cal, rms=0.130239Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=9.487 mas, bpa=32.23 degrees ! Estimated noise=7829.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.145 x 9.487 at 32.23 degrees (North through East) ! Clean map min=-0.036983 max=0.40104 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=9.426 mas, bpa=33.22 degrees ! Estimated noise=8390.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.400594 Jy ! Component: 100 - total flux cleaned = 0.524394 Jy ! Component: 150 - total flux cleaned = 0.571599 Jy ! Component: 200 - total flux cleaned = 0.580605 Jy ! Total flux subtracted in 200 components = 0.580605 Jy ! Clean residual min=-0.036856 max=0.036841 Jy/beam ! Clean residual mean=0.000000 rms=0.016251 Jy/beam ! Combined flux in latest and established models = 0.580605 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.580605 Jy ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=9.487 mas, bpa=32.23 degrees ! Estimated noise=7829.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00740101 Jy ! Component: 100 - total flux cleaned = -0.00757881 Jy ! Component: 150 - total flux cleaned = -0.00337817 Jy ! Component: 200 - total flux cleaned = 0.000417774 Jy ! Total flux subtracted in 200 components = 0.000417774 Jy ! Clean residual min=-0.014669 max=0.014837 Jy/beam ! Clean residual mean=-0.000001 rms=0.005325 Jy/beam ! Combined flux in latest and established models = 0.581023 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 0.581022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.824 mas, bmaj=9.569 mas, bpa=26.92 degrees ! Estimated noise=8865.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069115 Jy ! Component: 100 - total flux cleaned = 0.012052 Jy ! Component: 150 - total flux cleaned = 0.0146623 Jy ! Component: 200 - total flux cleaned = 0.0126744 Jy ! Total flux subtracted in 200 components = 0.0126744 Jy ! Clean residual min=-0.008359 max=0.008337 Jy/beam ! Clean residual mean=-0.000003 rms=0.003332 Jy/beam ! Combined flux in latest and established models = 0.593697 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154777 Jy ! Component: 100 - total flux cleaned = 0.00207749 Jy ! Component: 150 - total flux cleaned = 0.00321053 Jy ! Component: 200 - total flux cleaned = 0.00451323 Jy ! Total flux subtracted in 200 components = 0.00451323 Jy ! Clean residual min=-0.010747 max=0.010912 Jy/beam ! Clean residual mean=-0.000002 rms=0.003996 Jy/beam ! Combined flux in latest and established models = 0.59821 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 145 components and 0.59821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=9.487 mas, bpa=32.23 degrees ! Estimated noise=7829.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00425559 Jy ! Component: 100 - total flux cleaned = -0.00245592 Jy ! Component: 150 - total flux cleaned = 0.000585625 Jy ! Component: 200 - total flux cleaned = 0.00333266 Jy ! Total flux subtracted in 200 components = 0.00333266 Jy ! Clean residual min=-0.004383 max=0.004499 Jy/beam ! Clean residual mean=-0.000001 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.601543 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 184 components and 0.601543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131327Jy sigma=0.000622 ! Fit after self-cal, rms=0.131508Jy sigma=0.000621 wmodel J0659+0813_S_2017_05_31_pus_map.mod ! Writing 184 model components to file: J0659+0813_S_2017_05_31_pus_map.mod wobs J0659+0813_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0659+0813_S_2017_05_31_pus_uvs.fits wwins J0659+0813_S_2017_05_31_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0659+0813_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.145 x 9.487 at 32.23 degrees (North through East) ! Clean map min=-0.045986 max=0.3734 Jy/beam ! Writing clean map to FITS file: J0659+0813_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.373402 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00171167 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.37519 1.37519 2.75038 5.50077 11.0015 22.0031 44.0061 88.0123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.373 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.145 x 9.487 at 32.23 degrees (North through East) ! Clean map min=-0.045986 max=0.3734 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0659+0813_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:41:17 2019