! Started logfile: J0658-3642_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:31 2019 obs J0658-3642_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0658-3642_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.377011 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0658-3642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7872 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0658-3642_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 517 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 517 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1098 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970273Jy sigma=0.005678 ! Fit after self-cal, rms=0.911022Jy sigma=0.005389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=36.51 mas, bpa=-26.53 degrees ! Estimated noise=2950.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700588 Jy ! Component: 100 - total flux cleaned = 0.0862834 Jy ! Total flux subtracted in 100 components = 0.0862834 Jy ! Clean residual min=-0.007154 max=0.006675 Jy/beam ! Clean residual mean=-0.000076 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.0862834 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0862834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119429Jy sigma=0.000617 ! Fit after self-cal, rms=0.118862Jy sigma=0.000615 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.584 mas, bmaj=42.31 mas, bpa=-26.38 degrees ! Estimated noise=1627.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963201 Jy ! Component: 100 - total flux cleaned = 0.0126202 Jy ! Component: 150 - total flux cleaned = 0.0129475 Jy ! Component: 200 - total flux cleaned = 0.0128602 Jy ! Total flux subtracted in 200 components = 0.0128602 Jy ! Clean residual min=-0.004089 max=0.003076 Jy/beam ! Clean residual mean=-0.000059 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0991436 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 59 components and 0.0991436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117916Jy sigma=0.000611 ! Fit after self-cal, rms=0.117849Jy sigma=0.000611 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.98 KP 1.04 ! LA 1.05 MK 1.03 NL 0.89 OV 1.00* ! PT 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.03 ! LA 1.00 MK 1.01 NL 0.96 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.91 ! LA 0.79 MK 1.06 NL 1.06 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.117849Jy sigma=0.000611 ! Fit after self-cal, rms=0.113434Jy sigma=0.000613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=42.22 mas, bpa=-26.16 degrees ! Estimated noise=1658.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289029 Jy ! Component: 100 - total flux cleaned = -0.000290252 Jy ! Component: 150 - total flux cleaned = -0.00011422 Jy ! Component: 200 - total flux cleaned = -0.000146821 Jy ! Total flux subtracted in 200 components = -0.000146821 Jy ! Clean residual min=-0.002684 max=0.002500 Jy/beam ! Clean residual mean=-0.000012 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0989968 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.0989968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113379Jy sigma=0.000613 ! Fit after self-cal, rms=0.113130Jy sigma=0.000612 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113130Jy sigma=0.000612 ! Fit after self-cal, rms=0.112268Jy sigma=0.000611 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=42.59 mas, bpa=-26.15 degrees ! Estimated noise=1652.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000601494 Jy ! Component: 100 - total flux cleaned = -0.000636444 Jy ! Component: 150 - total flux cleaned = -0.000607973 Jy ! Component: 200 - total flux cleaned = -0.000607623 Jy ! Total flux subtracted in 200 components = -0.000607623 Jy ! Clean residual min=-0.001716 max=0.001924 Jy/beam ! Clean residual mean=0.000018 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0983892 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 0.0983892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112248Jy sigma=0.000611 ! Fit after self-cal, rms=0.112236Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027248 Jy ! Component: 100 - total flux cleaned = -0.000273446 Jy ! Component: 150 - total flux cleaned = -0.000273776 Jy ! Component: 200 - total flux cleaned = -0.000273054 Jy ! Total flux subtracted in 200 components = -0.000273054 Jy ! Clean residual min=-0.001656 max=0.001754 Jy/beam ! Clean residual mean=0.000016 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0981161 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.0981161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112224Jy sigma=0.000611 ! Fit after self-cal, rms=0.112202Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112202Jy sigma=0.000611 ! Fit after self-cal, rms=0.111992Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=42.65 mas, bpa=-26.14 degrees ! Estimated noise=1648.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238143 Jy ! Component: 100 - total flux cleaned = -0.000185741 Jy ! Component: 150 - total flux cleaned = -0.00011777 Jy ! Component: 200 - total flux cleaned = -7.59845e-05 Jy ! Total flux subtracted in 200 components = -7.59845e-05 Jy ! Clean residual min=-0.001625 max=0.001867 Jy/beam ! Clean residual mean=0.000020 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0980401 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.0980401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111980Jy sigma=0.000611 ! Fit after self-cal, rms=0.111982Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142172 Jy ! Component: 100 - total flux cleaned = -0.000122131 Jy ! Component: 150 - total flux cleaned = -8.26829e-05 Jy ! Component: 200 - total flux cleaned = -4.55203e-05 Jy ! Total flux subtracted in 200 components = -4.55203e-05 Jy ! Clean residual min=-0.001585 max=0.001825 Jy/beam ! Clean residual mean=0.000021 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0979946 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.0979946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111974Jy sigma=0.000611 ! Fit after self-cal, rms=0.111968Jy sigma=0.000611 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111968Jy sigma=0.000611 ! Fit after self-cal, rms=0.111830Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=58.56 mas, bpa=-19.14 degrees ! Estimated noise=1864.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3856e-05 Jy ! Component: 100 - total flux cleaned = 7.80747e-05 Jy ! Component: 150 - total flux cleaned = 7.79684e-05 Jy ! Component: 200 - total flux cleaned = 7.79855e-05 Jy ! Total flux subtracted in 200 components = 7.79855e-05 Jy ! Clean residual min=-0.001316 max=0.001368 Jy/beam ! Clean residual mean=0.000033 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0980726 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 193 components and 0.0980726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111824Jy sigma=0.000611 ! Fit after self-cal, rms=0.111818Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.90031e-05 Jy ! Component: 100 - total flux cleaned = -8.91532e-05 Jy ! Component: 150 - total flux cleaned = -8.87273e-05 Jy ! Component: 200 - total flux cleaned = -8.82942e-05 Jy ! Total flux subtracted in 200 components = -8.82942e-05 Jy ! Clean residual min=-0.001329 max=0.001341 Jy/beam ! Clean residual mean=0.000033 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0979843 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 212 components and 0.0979843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111814Jy sigma=0.000611 ! Fit after self-cal, rms=0.111808Jy sigma=0.000611 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=42.7 mas, bpa=-26.14 degrees ! Estimated noise=1647.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.803 x 42.7 at -26.14 degrees (North through East) ! Clean map min=-0.0033093 max=0.094418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=35.79 mas, bpa=-26.49 degrees ! Estimated noise=2629.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0712766 Jy ! Component: 100 - total flux cleaned = 0.0878374 Jy ! Component: 150 - total flux cleaned = 0.0951372 Jy ! Component: 200 - total flux cleaned = 0.0984548 Jy ! Total flux subtracted in 200 components = 0.0984548 Jy ! Clean residual min=-0.005208 max=0.004276 Jy/beam ! Clean residual mean=-0.000005 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.0984548 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0984548 Jy ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=42.7 mas, bpa=-26.14 degrees ! Estimated noise=1647.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213773 Jy ! Component: 100 - total flux cleaned = 0.00262822 Jy ! Component: 150 - total flux cleaned = 0.00263133 Jy ! Component: 200 - total flux cleaned = 0.00263166 Jy ! Total flux subtracted in 200 components = 0.00263166 Jy ! Clean residual min=-0.002694 max=0.002268 Jy/beam ! Clean residual mean=0.000025 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.101086 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 0.101086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=58.56 mas, bpa=-19.14 degrees ! Estimated noise=1864.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.21376e-05 Jy ! Component: 100 - total flux cleaned = -0.000247647 Jy ! Component: 150 - total flux cleaned = -0.000397361 Jy ! Component: 200 - total flux cleaned = -0.000537784 Jy ! Total flux subtracted in 200 components = -0.000537784 Jy ! Clean residual min=-0.002277 max=0.001807 Jy/beam ! Clean residual mean=0.000039 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.100549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.92634e-05 Jy ! Component: 100 - total flux cleaned = -0.000221587 Jy ! Component: 150 - total flux cleaned = -0.000336635 Jy ! Component: 200 - total flux cleaned = -0.000391319 Jy ! Total flux subtracted in 200 components = -0.000391319 Jy ! Clean residual min=-0.001867 max=0.001643 Jy/beam ! Clean residual mean=0.000041 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.100157 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 88 components and 0.100157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=42.7 mas, bpa=-26.14 degrees ! Estimated noise=1647.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032725 Jy ! Component: 100 - total flux cleaned = -0.000490354 Jy ! Component: 150 - total flux cleaned = -0.00052558 Jy ! Component: 200 - total flux cleaned = -0.000557683 Jy ! Total flux subtracted in 200 components = -0.000557683 Jy ! Clean residual min=-0.001936 max=0.001981 Jy/beam ! Clean residual mean=0.000028 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0995997 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.0995997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111831Jy sigma=0.000611 ! Fit after self-cal, rms=0.111825Jy sigma=0.000611 wmodel J0658-3642_S_2017_10_09_pus_map.mod ! Writing 108 model components to file: J0658-3642_S_2017_10_09_pus_map.mod wobs J0658-3642_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0658-3642_S_2017_10_09_pus_uvs.fits wwins J0658-3642_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0658-3642_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144717 Jy ! Component: 100 - total flux cleaned = -8.41885e-05 Jy ! Component: 150 - total flux cleaned = -8.53139e-05 Jy ! Component: 200 - total flux cleaned = -3.47471e-05 Jy ! Component: 250 - total flux cleaned = -3.41814e-05 Jy ! Component: 300 - total flux cleaned = -1.09495e-05 Jy ! Component: 350 - total flux cleaned = -1.07522e-05 Jy ! Component: 400 - total flux cleaned = -3.22835e-05 Jy ! Component: 450 - total flux cleaned = -0.000135559 Jy ! Component: 500 - total flux cleaned = -0.000195889 Jy ! Component: 550 - total flux cleaned = -0.000274788 Jy ! Component: 600 - total flux cleaned = -0.000313482 Jy ! Component: 650 - total flux cleaned = -0.000351426 Jy ! Component: 700 - total flux cleaned = -0.000388624 Jy ! Component: 750 - total flux cleaned = -0.000425346 Jy ! Component: 800 - total flux cleaned = -0.000389415 Jy ! Component: 850 - total flux cleaned = -0.000371962 Jy ! Component: 900 - total flux cleaned = -0.000372013 Jy ! Component: 950 - total flux cleaned = -0.000354718 Jy ! Component: 1000 - total flux cleaned = -0.000320922 Jy ! Component: 1050 - total flux cleaned = -0.000320931 Jy ! Component: 1100 - total flux cleaned = -0.0003374 Jy ! Component: 1150 - total flux cleaned = -0.000386083 Jy ! Component: 1200 - total flux cleaned = -0.000418078 Jy ! Component: 1250 - total flux cleaned = -0.00043394 Jy ! Component: 1300 - total flux cleaned = -0.000449526 Jy ! Component: 1350 - total flux cleaned = -0.000433913 Jy ! Component: 1400 - total flux cleaned = -0.0004186 Jy ! Component: 1450 - total flux cleaned = -0.000448895 Jy ! Component: 1500 - total flux cleaned = -0.000448683 Jy ! Component: 1550 - total flux cleaned = -0.000433748 Jy ! Component: 1600 - total flux cleaned = -0.000433838 Jy ! Component: 1650 - total flux cleaned = -0.000433888 Jy ! Component: 1700 - total flux cleaned = -0.00041946 Jy ! Component: 1750 - total flux cleaned = -0.00041947 Jy ! Component: 1800 - total flux cleaned = -0.000362512 Jy ! Component: 1850 - total flux cleaned = -0.00033432 Jy ! Component: 1900 - total flux cleaned = -0.000278519 Jy ! Component: 1950 - total flux cleaned = -0.000278589 Jy ! Component: 2000 - total flux cleaned = -0.000223481 Jy ! Component: 2050 - total flux cleaned = -0.000182484 Jy ! Component: 2100 - total flux cleaned = -0.000128292 Jy ! Component: 2150 - total flux cleaned = -6.10051e-05 Jy ! Component: 2200 - total flux cleaned = -2.08468e-05 Jy ! Component: 2250 - total flux cleaned = 1.89966e-05 Jy ! Component: 2300 - total flux cleaned = 3.21844e-05 Jy ! Component: 2350 - total flux cleaned = 9.7734e-05 Jy ! Component: 2400 - total flux cleaned = 9.76072e-05 Jy ! Component: 2450 - total flux cleaned = 9.75504e-05 Jy ! Component: 2500 - total flux cleaned = 0.000123274 Jy ! Component: 2550 - total flux cleaned = 0.000136108 Jy ! Component: 2600 - total flux cleaned = 0.000123444 Jy ! Component: 2650 - total flux cleaned = 0.000123408 Jy ! Component: 2700 - total flux cleaned = 0.000136002 Jy ! Component: 2750 - total flux cleaned = 0.000148507 Jy ! Component: 2800 - total flux cleaned = 0.00013608 Jy ! Component: 2850 - total flux cleaned = 0.000148602 Jy ! Component: 2900 - total flux cleaned = 0.000198036 Jy ! Component: 2950 - total flux cleaned = 0.000210321 Jy ! Component: 3000 - total flux cleaned = 0.000283939 Jy ! Component: 3050 - total flux cleaned = 0.000296105 Jy ! Component: 3100 - total flux cleaned = 0.000381352 Jy ! Component: 3150 - total flux cleaned = 0.000429884 Jy ! Component: 3200 - total flux cleaned = 0.0004541 Jy ! Component: 3250 - total flux cleaned = 0.00049031 Jy ! Component: 3300 - total flux cleaned = 0.000538407 Jy ! Component: 3350 - total flux cleaned = 0.000574402 Jy ! Component: 3400 - total flux cleaned = 0.00059832 Jy ! Component: 3450 - total flux cleaned = 0.000622149 Jy ! Component: 3500 - total flux cleaned = 0.000657814 Jy ! Component: 3550 - total flux cleaned = 0.000693451 Jy ! Component: 3600 - total flux cleaned = 0.000728976 Jy ! Component: 3650 - total flux cleaned = 0.000788189 Jy ! Component: 3700 - total flux cleaned = 0.000835522 Jy ! Component: 3750 - total flux cleaned = 0.000894575 Jy ! Component: 3800 - total flux cleaned = 0.000941791 Jy ! Component: 3850 - total flux cleaned = 0.000989029 Jy ! Component: 3900 - total flux cleaned = 0.0010479 Jy ! Component: 3950 - total flux cleaned = 0.00108321 Jy ! Component: 4000 - total flux cleaned = 0.00114204 Jy ! Component: 4050 - total flux cleaned = 0.0012126 Jy ! Total flux subtracted in 4096 components = 0.0012596 Jy ! Clean residual min=-0.000596 max=0.000770 Jy/beam ! Clean residual mean=0.000003 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.100859 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 344 components and 0.100859 Jy ![Exited script file: muppet] wmap "J0658-3642_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.803 x 42.7 at -26.14 degrees (North through East) ! Clean map min=-0.0026801 max=0.093479 Jy/beam ! Writing clean map to FITS file: J0658-3642_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0934788 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.738946 0.738946 1.47789 2.95578 5.91157 11.8231 23.6463 47.2925 94.5851 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.803 x 42.7 at -26.14 degrees (North through East) ! Clean map min=-0.0026801 max=0.093479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0658-3642_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:36 2019