! Started logfile: J0658-3642_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:40 2019 obs J0658-3642_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0658-3642_S_2017_01_16_pus_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.614689 visibilities/baseline/integration-bin. ! Found source: J0658-3642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 6528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0658-3642_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004176Jy sigma=0.005655 ! Fit after self-cal, rms=0.924718Jy sigma=0.005277 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=10.39 mas, bpa=19.46 degrees ! Estimated noise=3002.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656386 Jy ! Component: 100 - total flux cleaned = 0.0800172 Jy ! Total flux subtracted in 100 components = 0.0800172 Jy ! Clean residual min=-0.010912 max=0.008407 Jy/beam ! Clean residual mean=-0.000049 rms=0.002232 Jy/beam ! Combined flux in latest and established models = 0.0800172 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0800172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126479Jy sigma=0.000634 ! Fit after self-cal, rms=0.126064Jy sigma=0.000632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=16.67 mas, bpa=25.77 degrees ! Estimated noise=1676.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004478 Jy ! Component: 100 - total flux cleaned = 0.00665863 Jy ! Component: 150 - total flux cleaned = 0.00769596 Jy ! Component: 200 - total flux cleaned = 0.00783603 Jy ! Total flux subtracted in 200 components = 0.00783603 Jy ! Clean residual min=-0.004192 max=0.003221 Jy/beam ! Clean residual mean=-0.000051 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.0878532 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.0878532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125910Jy sigma=0.000631 ! Fit after self-cal, rms=0.125983Jy sigma=0.000631 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00* KP 0.97 ! LA 1.00 MK 1.00* NL 0.87 OV 0.95 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.17 KP 1.03 ! LA 0.93 MK 1.00* NL 1.13 OV 1.07 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 1.29 KP 0.96 ! LA 1.04 MK 1.00* NL 1.00 OV 0.99 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 0.72 KP 1.16 ! LA 0.65 MK 1.00* NL 1.00* OV 1.08 ! PT 0.97 SC 0.78 ! ! ! Fit before self-cal, rms=0.125983Jy sigma=0.000631 ! Fit after self-cal, rms=0.124100Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=16.69 mas, bpa=25.7 degrees ! Estimated noise=1671.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491317 Jy ! Component: 100 - total flux cleaned = -0.000613965 Jy ! Component: 150 - total flux cleaned = -0.00065217 Jy ! Component: 200 - total flux cleaned = -0.000686263 Jy ! Total flux subtracted in 200 components = -0.000686263 Jy ! Clean residual min=-0.003974 max=0.002881 Jy/beam ! Clean residual mean=-0.000034 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.087167 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.087167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124066Jy sigma=0.000629 ! Fit after self-cal, rms=0.124150Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124150Jy sigma=0.000629 ! Fit after self-cal, rms=0.125334Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.947 mas, bmaj=16.82 mas, bpa=25.84 degrees ! Estimated noise=1670.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289074 Jy ! Component: 100 - total flux cleaned = -0.000363839 Jy ! Component: 150 - total flux cleaned = -0.000397636 Jy ! Component: 200 - total flux cleaned = -0.000462894 Jy ! Total flux subtracted in 200 components = -0.000462894 Jy ! Clean residual min=-0.003839 max=0.002941 Jy/beam ! Clean residual mean=-0.000028 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.0867041 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0867041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125304Jy sigma=0.000628 ! Fit after self-cal, rms=0.125396Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.81544e-05 Jy ! Component: 100 - total flux cleaned = -0.00011013 Jy ! Component: 150 - total flux cleaned = -0.000141324 Jy ! Component: 200 - total flux cleaned = -0.000171456 Jy ! Total flux subtracted in 200 components = -0.000171456 Jy ! Clean residual min=-0.003826 max=0.002898 Jy/beam ! Clean residual mean=-0.000028 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0865326 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0865326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125368Jy sigma=0.000628 ! Fit after self-cal, rms=0.125375Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125375Jy sigma=0.000628 ! Fit after self-cal, rms=0.125771Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=16.83 mas, bpa=25.88 degrees ! Estimated noise=1669.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211432 Jy ! Component: 100 - total flux cleaned = -0.000306045 Jy ! Component: 150 - total flux cleaned = -0.000364753 Jy ! Component: 200 - total flux cleaned = -0.0003923 Jy ! Total flux subtracted in 200 components = -0.0003923 Jy ! Clean residual min=-0.003730 max=0.002830 Jy/beam ! Clean residual mean=-0.000028 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0861403 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0861403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125743Jy sigma=0.000628 ! Fit after self-cal, rms=0.125783Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.45104e-05 Jy ! Component: 100 - total flux cleaned = -0.000115103 Jy ! Component: 150 - total flux cleaned = -0.000144113 Jy ! Component: 200 - total flux cleaned = -0.000170768 Jy ! Total flux subtracted in 200 components = -0.000170768 Jy ! Clean residual min=-0.003785 max=0.002848 Jy/beam ! Clean residual mean=-0.000029 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0859695 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0859695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125760Jy sigma=0.000628 ! Fit after self-cal, rms=0.125768Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125768Jy sigma=0.000628 ! Fit after self-cal, rms=0.125796Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.231 mas, bmaj=32.41 mas, bpa=14.25 degrees ! Estimated noise=1856.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.87997e-05 Jy ! Component: 100 - total flux cleaned = -0.000130779 Jy ! Component: 150 - total flux cleaned = -0.000194678 Jy ! Component: 200 - total flux cleaned = -0.00022553 Jy ! Total flux subtracted in 200 components = -0.00022553 Jy ! Clean residual min=-0.003372 max=0.002565 Jy/beam ! Clean residual mean=-0.000043 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.085744 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.085744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125783Jy sigma=0.000628 ! Fit after self-cal, rms=0.125769Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.49845e-05 Jy ! Component: 100 - total flux cleaned = -0.000103507 Jy ! Component: 150 - total flux cleaned = -0.000120248 Jy ! Component: 200 - total flux cleaned = -0.000151055 Jy ! Total flux subtracted in 200 components = -0.000151055 Jy ! Clean residual min=-0.003300 max=0.002572 Jy/beam ! Clean residual mean=-0.000044 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0855929 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.0855929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125757Jy sigma=0.000628 ! Fit after self-cal, rms=0.125761Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=16.8 mas, bpa=25.89 degrees ! Estimated noise=1668.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.936 x 16.8 at 25.89 degrees (North through East) ! Clean map min=-0.0040657 max=0.084514 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=10.31 mas, bpa=19.5 degrees ! Estimated noise=2928.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0641513 Jy ! Component: 100 - total flux cleaned = 0.0789517 Jy ! Component: 150 - total flux cleaned = 0.0831854 Jy ! Component: 200 - total flux cleaned = 0.084196 Jy ! Total flux subtracted in 200 components = 0.084196 Jy ! Clean residual min=-0.010468 max=0.007229 Jy/beam ! Clean residual mean=-0.000011 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 0.084196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.084196 Jy ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=16.8 mas, bpa=25.89 degrees ! Estimated noise=1668.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251681 Jy ! Component: 100 - total flux cleaned = 0.00252143 Jy ! Component: 150 - total flux cleaned = 0.00245697 Jy ! Component: 200 - total flux cleaned = 0.00239692 Jy ! Total flux subtracted in 200 components = 0.00239692 Jy ! Clean residual min=-0.004212 max=0.003088 Jy/beam ! Clean residual mean=-0.000026 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.0865929 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0865929 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.231 mas, bmaj=32.41 mas, bpa=14.25 degrees ! Estimated noise=1856.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729082 Jy ! Component: 100 - total flux cleaned = -0.000728491 Jy ! Component: 150 - total flux cleaned = -0.000729364 Jy ! Component: 200 - total flux cleaned = -0.00077569 Jy ! Total flux subtracted in 200 components = -0.00077569 Jy ! Clean residual min=-0.003303 max=0.002663 Jy/beam ! Clean residual mean=-0.000043 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0858172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17645e-05 Jy ! Component: 100 - total flux cleaned = -6.26523e-05 Jy ! Component: 150 - total flux cleaned = -0.000101525 Jy ! Component: 200 - total flux cleaned = -0.000138798 Jy ! Total flux subtracted in 200 components = -0.000138798 Jy ! Clean residual min=-0.003301 max=0.002642 Jy/beam ! Clean residual mean=-0.000043 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.0856784 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0856784 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=16.8 mas, bpa=25.89 degrees ! Estimated noise=1668.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399923 Jy ! Component: 100 - total flux cleaned = -0.000296396 Jy ! Component: 150 - total flux cleaned = -0.000250609 Jy ! Component: 200 - total flux cleaned = -0.000208774 Jy ! Total flux subtracted in 200 components = -0.000208774 Jy ! Clean residual min=-0.003862 max=0.002883 Jy/beam ! Clean residual mean=-0.000029 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0854697 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.0854697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125759Jy sigma=0.000628 ! Fit after self-cal, rms=0.125783Jy sigma=0.000628 wmodel J0658-3642_S_2017_01_16_pus_map.mod ! Writing 49 model components to file: J0658-3642_S_2017_01_16_pus_map.mod wobs J0658-3642_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0658-3642_S_2017_01_16_pus_uvs.fits wwins J0658-3642_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0658-3642_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162419 Jy ! Component: 100 - total flux cleaned = -0.00238781 Jy ! Component: 150 - total flux cleaned = -0.00268708 Jy ! Component: 200 - total flux cleaned = -0.00301839 Jy ! Component: 250 - total flux cleaned = -0.00320155 Jy ! Component: 300 - total flux cleaned = -0.00346585 Jy ! Component: 350 - total flux cleaned = -0.00363658 Jy ! Component: 400 - total flux cleaned = -0.00380397 Jy ! Component: 450 - total flux cleaned = -0.00392685 Jy ! Component: 500 - total flux cleaned = -0.00404686 Jy ! Component: 550 - total flux cleaned = -0.00416381 Jy ! Component: 600 - total flux cleaned = -0.00435507 Jy ! Component: 650 - total flux cleaned = -0.00446686 Jy ! Component: 700 - total flux cleaned = -0.00464989 Jy ! Component: 750 - total flux cleaned = -0.00479397 Jy ! Component: 800 - total flux cleaned = -0.00500609 Jy ! Component: 850 - total flux cleaned = -0.00511019 Jy ! Component: 900 - total flux cleaned = -0.00534937 Jy ! Component: 950 - total flux cleaned = -0.00545034 Jy ! Component: 1000 - total flux cleaned = -0.00561518 Jy ! Component: 1050 - total flux cleaned = -0.00577708 Jy ! Component: 1100 - total flux cleaned = -0.00587296 Jy ! Component: 1150 - total flux cleaned = -0.00599922 Jy ! Component: 1200 - total flux cleaned = -0.00609254 Jy ! Component: 1250 - total flux cleaned = -0.00624502 Jy ! Component: 1300 - total flux cleaned = -0.00624505 Jy ! Component: 1350 - total flux cleaned = -0.0063637 Jy ! Component: 1400 - total flux cleaned = -0.00633422 Jy ! Component: 1450 - total flux cleaned = -0.00636272 Jy ! Component: 1500 - total flux cleaned = -0.00633431 Jy ! Component: 1550 - total flux cleaned = -0.00625022 Jy ! Component: 1600 - total flux cleaned = -0.00633336 Jy ! Component: 1650 - total flux cleaned = -0.00633344 Jy ! Component: 1700 - total flux cleaned = -0.00633362 Jy ! Component: 1750 - total flux cleaned = -0.00628042 Jy ! Component: 1800 - total flux cleaned = -0.00635948 Jy ! Component: 1850 - total flux cleaned = -0.00622925 Jy ! Component: 1900 - total flux cleaned = -0.00625541 Jy ! Component: 1950 - total flux cleaned = -0.00628104 Jy ! Component: 2000 - total flux cleaned = -0.00630635 Jy ! Component: 2050 - total flux cleaned = -0.00635572 Jy ! Component: 2100 - total flux cleaned = -0.0063552 Jy ! Component: 2150 - total flux cleaned = -0.006282 Jy ! Component: 2200 - total flux cleaned = -0.0063059 Jy ! Component: 2250 - total flux cleaned = -0.00625819 Jy ! Component: 2300 - total flux cleaned = -0.00635299 Jy ! Component: 2350 - total flux cleaned = -0.00632947 Jy ! Component: 2400 - total flux cleaned = -0.00628308 Jy ! Component: 2450 - total flux cleaned = -0.00642128 Jy ! Component: 2500 - total flux cleaned = -0.00642118 Jy ! Component: 2550 - total flux cleaned = -0.00639857 Jy ! Component: 2600 - total flux cleaned = -0.00646612 Jy ! Component: 2650 - total flux cleaned = -0.00648831 Jy ! Component: 2700 - total flux cleaned = -0.00648845 Jy ! Component: 2750 - total flux cleaned = -0.00653242 Jy ! Component: 2800 - total flux cleaned = -0.00655439 Jy ! Component: 2850 - total flux cleaned = -0.00659759 Jy ! Component: 2900 - total flux cleaned = -0.00657595 Jy ! Component: 2950 - total flux cleaned = -0.00655456 Jy ! Component: 3000 - total flux cleaned = -0.00659716 Jy ! Component: 3050 - total flux cleaned = -0.00657604 Jy ! Component: 3100 - total flux cleaned = -0.00668054 Jy ! Component: 3150 - total flux cleaned = -0.00668058 Jy ! Component: 3200 - total flux cleaned = -0.00672214 Jy ! Component: 3250 - total flux cleaned = -0.00678369 Jy ! Component: 3300 - total flux cleaned = -0.00682441 Jy ! Component: 3350 - total flux cleaned = -0.00690543 Jy ! Component: 3400 - total flux cleaned = -0.00696575 Jy ! Component: 3450 - total flux cleaned = -0.00702571 Jy ! Component: 3500 - total flux cleaned = -0.00710517 Jy ! Component: 3550 - total flux cleaned = -0.00714464 Jy ! Component: 3600 - total flux cleaned = -0.00718407 Jy ! Component: 3650 - total flux cleaned = -0.00728147 Jy ! Component: 3700 - total flux cleaned = -0.00726175 Jy ! Component: 3750 - total flux cleaned = -0.00731963 Jy ! Component: 3800 - total flux cleaned = -0.00735799 Jy ! Component: 3850 - total flux cleaned = -0.00735813 Jy ! Component: 3900 - total flux cleaned = -0.00745303 Jy ! Component: 3950 - total flux cleaned = -0.0075095 Jy ! Component: 4000 - total flux cleaned = -0.00749078 Jy ! Component: 4050 - total flux cleaned = -0.00756558 Jy ! Total flux subtracted in 4096 components = -0.00763995 Jy ! Clean residual min=-0.001237 max=0.001091 Jy/beam ! Clean residual mean=-0.000007 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0778297 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 275 components and 0.0778297 Jy ![Exited script file: muppet] wmap "J0658-3642_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.936 x 16.8 at 25.89 degrees (North through East) ! Clean map min=-0.0035495 max=0.083002 Jy/beam ! Writing clean map to FITS file: J0658-3642_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0830025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000338903 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22491 1.22491 2.44983 4.89965 9.7993 19.5986 39.1972 78.3944 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.936 x 16.8 at 25.89 degrees (North through East) ! Clean map min=-0.0035495 max=0.083002 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0658-3642_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:46 2019