! Started logfile: J0657+1313_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:26 2019 obs J0657+1313_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0657+1313_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.584298 visibilities/baseline/integration-bin. ! Found source: J0657+1313 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0657+1313_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 552 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 969 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981473Jy sigma=0.009135 ! Fit after self-cal, rms=0.951761Jy sigma=0.008864 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=10.42 mas, bpa=-20.43 degrees ! Estimated noise=1344.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351179 Jy ! Component: 100 - total flux cleaned = 0.0443408 Jy ! Total flux subtracted in 100 components = 0.0443408 Jy ! Clean residual min=-0.004400 max=0.005799 Jy/beam ! Clean residual mean=-0.000030 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.0443408 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0443408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077994Jy sigma=0.000658 ! Fit after self-cal, rms=0.077192Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=11.16 mas, bpa=-19.92 degrees ! Estimated noise=859.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935968 Jy ! Component: 100 - total flux cleaned = 0.0145286 Jy ! Component: 150 - total flux cleaned = 0.0178004 Jy ! Component: 200 - total flux cleaned = 0.0199866 Jy ! Total flux subtracted in 200 components = 0.0199866 Jy ! Clean residual min=-0.002810 max=0.003560 Jy/beam ! Clean residual mean=-0.000015 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0643274 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 48 components and 0.0643274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075964Jy sigma=0.000641 ! Fit after self-cal, rms=0.075860Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.92 HN 1.09 KP 1.05 ! LA 1.09 MK 1.12 NL 1.00 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.94 HN 1.07 KP 1.03 ! LA 1.05 MK 1.15 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 0.94 KP 0.99 ! LA 0.80 MK 1.23 NL 1.18 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.84 KP 1.00* ! LA 1.00* MK 0.87 NL 1.00* OV 1.00* ! PT 0.75 ! ! ! Fit before self-cal, rms=0.075860Jy sigma=0.000640 ! Fit after self-cal, rms=0.076425Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=11.21 mas, bpa=-19.59 degrees ! Estimated noise=866.429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710057 Jy ! Component: 100 - total flux cleaned = 0.000781904 Jy ! Component: 150 - total flux cleaned = 0.000837353 Jy ! Component: 200 - total flux cleaned = 0.000906932 Jy ! Total flux subtracted in 200 components = 0.000906932 Jy ! Clean residual min=-0.002503 max=0.002483 Jy/beam ! Clean residual mean=-0.000006 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0652343 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.0652343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076395Jy sigma=0.000636 ! Fit after self-cal, rms=0.076554Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076554Jy sigma=0.000635 ! Fit after self-cal, rms=0.075843Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=11.29 mas, bpa=-19.28 degrees ! Estimated noise=868.419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395866 Jy ! Component: 100 - total flux cleaned = 0.000321671 Jy ! Component: 150 - total flux cleaned = 0.000280178 Jy ! Component: 200 - total flux cleaned = 0.000262403 Jy ! Total flux subtracted in 200 components = 0.000262403 Jy ! Clean residual min=-0.002113 max=0.002030 Jy/beam ! Clean residual mean=-0.000004 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0654967 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.0654968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075822Jy sigma=0.000633 ! Fit after self-cal, rms=0.075898Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21578e-05 Jy ! Component: 100 - total flux cleaned = 7.30153e-05 Jy ! Component: 150 - total flux cleaned = 9.16661e-05 Jy ! Component: 200 - total flux cleaned = 0.000108244 Jy ! Total flux subtracted in 200 components = 0.000108244 Jy ! Clean residual min=-0.002148 max=0.002107 Jy/beam ! Clean residual mean=-0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.065605 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.065605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075885Jy sigma=0.000632 ! Fit after self-cal, rms=0.075880Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075880Jy sigma=0.000632 ! Fit after self-cal, rms=0.075880Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=11.35 mas, bpa=-19.16 degrees ! Estimated noise=863.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171516 Jy ! Component: 100 - total flux cleaned = 0.000126704 Jy ! Component: 150 - total flux cleaned = 0.000126961 Jy ! Component: 200 - total flux cleaned = 0.000127268 Jy ! Total flux subtracted in 200 components = 0.000127268 Jy ! Clean residual min=-0.002071 max=0.002020 Jy/beam ! Clean residual mean=-0.000004 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0657323 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.0657323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075862Jy sigma=0.000632 ! Fit after self-cal, rms=0.075896Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.25066e-06 Jy ! Component: 100 - total flux cleaned = 1.17432e-05 Jy ! Component: 150 - total flux cleaned = 2.76758e-05 Jy ! Component: 200 - total flux cleaned = 2.77631e-05 Jy ! Total flux subtracted in 200 components = 2.77631e-05 Jy ! Clean residual min=-0.002035 max=0.002002 Jy/beam ! Clean residual mean=-0.000004 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.06576 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.06576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075886Jy sigma=0.000632 ! Fit after self-cal, rms=0.075884Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075884Jy sigma=0.000632 ! Fit after self-cal, rms=0.075675Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.281 mas, bmaj=12.41 mas, bpa=-17.45 degrees ! Estimated noise=1047.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436179 Jy ! Component: 100 - total flux cleaned = 0.000502354 Jy ! Component: 150 - total flux cleaned = 0.000515505 Jy ! Component: 200 - total flux cleaned = 0.000528188 Jy ! Total flux subtracted in 200 components = 0.000528188 Jy ! Clean residual min=-0.002141 max=0.002115 Jy/beam ! Clean residual mean=-0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0662882 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 99 components and 0.0662882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075665Jy sigma=0.000632 ! Fit after self-cal, rms=0.075685Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158305 Jy ! Component: 100 - total flux cleaned = 0.00018655 Jy ! Component: 150 - total flux cleaned = 0.000197855 Jy ! Component: 200 - total flux cleaned = 0.000208931 Jy ! Total flux subtracted in 200 components = 0.000208931 Jy ! Clean residual min=-0.002137 max=0.002114 Jy/beam ! Clean residual mean=-0.000007 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0664972 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.0664972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075681Jy sigma=0.000632 ! Fit after self-cal, rms=0.075682Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=11.39 mas, bpa=-19.06 degrees ! Estimated noise=858.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.557 x 11.39 at -19.06 degrees (North through East) ! Clean map min=-0.0020281 max=0.048202 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=10.77 mas, bpa=-19.52 degrees ! Estimated noise=1352.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350522 Jy ! Component: 100 - total flux cleaned = 0.0448182 Jy ! Component: 150 - total flux cleaned = 0.0505549 Jy ! Component: 200 - total flux cleaned = 0.0545667 Jy ! Total flux subtracted in 200 components = 0.0545667 Jy ! Clean residual min=-0.003147 max=0.003413 Jy/beam ! Clean residual mean=-0.000016 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.0545667 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0545667 Jy ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=11.39 mas, bpa=-19.06 degrees ! Estimated noise=858.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504932 Jy ! Component: 100 - total flux cleaned = 0.0077371 Jy ! Component: 150 - total flux cleaned = 0.00851901 Jy ! Component: 200 - total flux cleaned = 0.00919158 Jy ! Total flux subtracted in 200 components = 0.00919158 Jy ! Clean residual min=-0.002574 max=0.002010 Jy/beam ! Clean residual mean=-0.000011 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0637583 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 49 components and 0.0637583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.281 mas, bmaj=12.41 mas, bpa=-17.45 degrees ! Estimated noise=1047.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179943 Jy ! Component: 100 - total flux cleaned = 0.00230449 Jy ! Component: 150 - total flux cleaned = 0.00243884 Jy ! Component: 200 - total flux cleaned = 0.00254627 Jy ! Total flux subtracted in 200 components = 0.00254627 Jy ! Clean residual min=-0.002242 max=0.002057 Jy/beam ! Clean residual mean=-0.000008 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0663046 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.67528e-05 Jy ! Component: 100 - total flux cleaned = 0.000158344 Jy ! Component: 150 - total flux cleaned = 0.000217441 Jy ! Component: 200 - total flux cleaned = 0.000248253 Jy ! Total flux subtracted in 200 components = 0.000248253 Jy ! Clean residual min=-0.002167 max=0.002093 Jy/beam ! Clean residual mean=-0.000007 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0665528 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.0665528 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=11.39 mas, bpa=-19.06 degrees ! Estimated noise=858.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058429 Jy ! Component: 100 - total flux cleaned = -0.000583234 Jy ! Component: 150 - total flux cleaned = -0.000559849 Jy ! Component: 200 - total flux cleaned = -0.000539005 Jy ! Total flux subtracted in 200 components = -0.000539005 Jy ! Clean residual min=-0.002113 max=0.001873 Jy/beam ! Clean residual mean=-0.000005 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0660138 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.0660138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075679Jy sigma=0.000632 ! Fit after self-cal, rms=0.075670Jy sigma=0.000632 wmodel J0657+1313_S_2017_10_09_pus_map.mod ! Writing 72 model components to file: J0657+1313_S_2017_10_09_pus_map.mod wobs J0657+1313_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0657+1313_S_2017_10_09_pus_uvs.fits wwins J0657+1313_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0657+1313_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571445 Jy ! Component: 100 - total flux cleaned = -0.000474648 Jy ! Component: 150 - total flux cleaned = -0.00029437 Jy ! Component: 200 - total flux cleaned = -0.000377495 Jy ! Component: 250 - total flux cleaned = -0.000430501 Jy ! Component: 300 - total flux cleaned = -0.000481421 Jy ! Component: 350 - total flux cleaned = -0.000605178 Jy ! Component: 400 - total flux cleaned = -0.000700632 Jy ! Component: 450 - total flux cleaned = -0.000794138 Jy ! Component: 500 - total flux cleaned = -0.000930435 Jy ! Component: 550 - total flux cleaned = -0.00110715 Jy ! Component: 600 - total flux cleaned = -0.00123616 Jy ! Component: 650 - total flux cleaned = -0.00136111 Jy ! Component: 700 - total flux cleaned = -0.00144273 Jy ! Component: 750 - total flux cleaned = -0.00152246 Jy ! Component: 800 - total flux cleaned = -0.00156122 Jy ! Component: 850 - total flux cleaned = -0.00163745 Jy ! Component: 900 - total flux cleaned = -0.00163724 Jy ! Component: 950 - total flux cleaned = -0.00169226 Jy ! Component: 1000 - total flux cleaned = -0.00171038 Jy ! Component: 1050 - total flux cleaned = -0.00172819 Jy ! Component: 1100 - total flux cleaned = -0.00176264 Jy ! Component: 1150 - total flux cleaned = -0.00181374 Jy ! Component: 1200 - total flux cleaned = -0.00181406 Jy ! Component: 1250 - total flux cleaned = -0.00187996 Jy ! Component: 1300 - total flux cleaned = -0.00194411 Jy ! Component: 1350 - total flux cleaned = -0.00194429 Jy ! Component: 1400 - total flux cleaned = -0.00200673 Jy ! Component: 1450 - total flux cleaned = -0.00202233 Jy ! Component: 1500 - total flux cleaned = -0.00202242 Jy ! Component: 1550 - total flux cleaned = -0.00202246 Jy ! Component: 1600 - total flux cleaned = -0.00202259 Jy ! Component: 1650 - total flux cleaned = -0.00196489 Jy ! Component: 1700 - total flux cleaned = -0.00200769 Jy ! Component: 1750 - total flux cleaned = -0.00202155 Jy ! Component: 1800 - total flux cleaned = -0.00202162 Jy ! Component: 1850 - total flux cleaned = -0.00204904 Jy ! Component: 1900 - total flux cleaned = -0.00206261 Jy ! Component: 1950 - total flux cleaned = -0.00207593 Jy ! Component: 2000 - total flux cleaned = -0.00214161 Jy ! Component: 2050 - total flux cleaned = -0.00214168 Jy ! Component: 2100 - total flux cleaned = -0.00218026 Jy ! Component: 2150 - total flux cleaned = -0.00220571 Jy ! Component: 2200 - total flux cleaned = -0.00224333 Jy ! Component: 2250 - total flux cleaned = -0.00226796 Jy ! Component: 2300 - total flux cleaned = -0.00226768 Jy ! Component: 2350 - total flux cleaned = -0.00226766 Jy ! Component: 2400 - total flux cleaned = -0.00224392 Jy ! Component: 2450 - total flux cleaned = -0.00225569 Jy ! Component: 2500 - total flux cleaned = -0.00225564 Jy ! Component: 2550 - total flux cleaned = -0.00224404 Jy ! Component: 2600 - total flux cleaned = -0.00228983 Jy ! Component: 2650 - total flux cleaned = -0.00231227 Jy ! Component: 2700 - total flux cleaned = -0.00227868 Jy ! Component: 2750 - total flux cleaned = -0.00230094 Jy ! Component: 2800 - total flux cleaned = -0.00230088 Jy ! Component: 2850 - total flux cleaned = -0.00223569 Jy ! Component: 2900 - total flux cleaned = -0.00225722 Jy ! Component: 2950 - total flux cleaned = -0.00219308 Jy ! Component: 3000 - total flux cleaned = -0.0021507 Jy ! Component: 3050 - total flux cleaned = -0.00209797 Jy ! Component: 3100 - total flux cleaned = -0.00204576 Jy ! Component: 3150 - total flux cleaned = -0.00199406 Jy ! Component: 3200 - total flux cleaned = -0.00196333 Jy ! Component: 3250 - total flux cleaned = -0.00192267 Jy ! Component: 3300 - total flux cleaned = -0.00189226 Jy ! Component: 3350 - total flux cleaned = -0.00185213 Jy ! Component: 3400 - total flux cleaned = -0.00183215 Jy ! Component: 3450 - total flux cleaned = -0.0017927 Jy ! Component: 3500 - total flux cleaned = -0.00177301 Jy ! Component: 3550 - total flux cleaned = -0.00173395 Jy ! Component: 3600 - total flux cleaned = -0.00168558 Jy ! Component: 3650 - total flux cleaned = -0.00162797 Jy ! Component: 3700 - total flux cleaned = -0.00160887 Jy ! Component: 3750 - total flux cleaned = -0.00156151 Jy ! Component: 3800 - total flux cleaned = -0.00155201 Jy ! Component: 3850 - total flux cleaned = -0.00147713 Jy ! Component: 3900 - total flux cleaned = -0.00144934 Jy ! Component: 3950 - total flux cleaned = -0.00140317 Jy ! Component: 4000 - total flux cleaned = -0.00135723 Jy ! Component: 4050 - total flux cleaned = -0.00131156 Jy ! Total flux subtracted in 4096 components = -0.00125711 Jy ! Clean residual min=-0.000530 max=0.000507 Jy/beam ! Clean residual mean=0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0647567 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 337 components and 0.0647568 Jy ![Exited script file: muppet] wmap "J0657+1313_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.557 x 11.39 at -19.06 degrees (North through East) ! Clean map min=-0.0013658 max=0.047753 Jy/beam ! Writing clean map to FITS file: J0657+1313_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0477531 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159605 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00269 1.00269 2.00538 4.01076 8.02152 16.043 32.0861 64.1721 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.557 x 11.39 at -19.06 degrees (North through East) ! Clean map min=-0.0013658 max=0.047753 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0657+1313_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:31 2019