! Started logfile: J0656+3209_S_2017_05_27_pus_uvs.log on Fri May 3 10:59:34 2019 obs J0656+3209_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0656+3209_S_2017_05_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.950049 visibilities/baseline/integration-bin. ! Found source: J0656+3209 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0656+3209_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.792542Jy sigma=0.024968 ! Fit after self-cal, rms=0.785449Jy sigma=0.024947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=5.939 mas, bpa=-2.179 degrees ! Estimated noise=858.752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137483 Jy ! Component: 100 - total flux cleaned = 0.168208 Jy ! Total flux subtracted in 100 components = 0.168208 Jy ! Clean residual min=-0.020863 max=0.030855 Jy/beam ! Clean residual mean=0.000001 rms=0.006932 Jy/beam ! Combined flux in latest and established models = 0.168208 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.168208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112028Jy sigma=0.003971 ! Fit after self-cal, rms=0.112008Jy sigma=0.003970 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=6.669 mas, bpa=-2.946 degrees ! Estimated noise=532.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210603 Jy ! Component: 100 - total flux cleaned = 0.0290813 Jy ! Component: 150 - total flux cleaned = 0.0301052 Jy ! Component: 200 - total flux cleaned = 0.0306876 Jy ! Total flux subtracted in 200 components = 0.0306876 Jy ! Clean residual min=-0.022069 max=0.033269 Jy/beam ! Clean residual mean=-0.000004 rms=0.007259 Jy/beam ! Combined flux in latest and established models = 0.198896 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.198896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109063Jy sigma=0.003866 ! Fit after self-cal, rms=0.108959Jy sigma=0.003866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.85 HN 0.92 KP 0.92 ! LA 0.92 MK 1.00 NL 0.81 OV 0.93 ! PT 0.98 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 22.84 FD 0.89 HN 0.95 KP 0.90 ! LA 0.89 MK 0.96 NL 0.96 OV 0.93 ! PT 0.96 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.91 HN 0.95 KP 0.93 ! LA 0.91 MK 1.01 NL 0.91 OV 0.87 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.95 KP 1.00* ! LA 0.98 MK 0.96 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.108959Jy sigma=0.003866 ! Fit after self-cal, rms=1.404679Jy sigma=0.000830 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=6.759 mas, bpa=-2.421 degrees ! Estimated noise=573.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514653 Jy ! Component: 100 - total flux cleaned = -0.00195072 Jy ! Component: 150 - total flux cleaned = -0.00263947 Jy ! Component: 200 - total flux cleaned = -0.00290335 Jy ! Total flux subtracted in 200 components = -0.00290335 Jy ! Clean residual min=-0.006236 max=0.004450 Jy/beam ! Clean residual mean=0.000003 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.195992 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.195992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.400276Jy sigma=0.000818 ! Fit after self-cal, rms=1.400449Jy sigma=0.000810 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.400449Jy sigma=0.000810 ! Fit after self-cal, rms=0.771535Jy sigma=0.000703 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=6.741 mas, bpa=-2.077 degrees ! Estimated noise=569.353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116453 Jy ! Component: 100 - total flux cleaned = 0.00146225 Jy ! Component: 150 - total flux cleaned = 0.00162633 Jy ! Component: 200 - total flux cleaned = 0.00183162 Jy ! Total flux subtracted in 200 components = 0.00183162 Jy ! Clean residual min=-0.002536 max=0.002243 Jy/beam ! Clean residual mean=0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.197824 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.197824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.771104Jy sigma=0.000703 ! Fit after self-cal, rms=0.771099Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186216 Jy ! Component: 100 - total flux cleaned = 0.000186873 Jy ! Component: 150 - total flux cleaned = 0.000230591 Jy ! Component: 200 - total flux cleaned = 0.000268219 Jy ! Total flux subtracted in 200 components = 0.000268219 Jy ! Clean residual min=-0.002574 max=0.002274 Jy/beam ! Clean residual mean=0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.198092 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.198092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.770945Jy sigma=0.000702 ! Fit after self-cal, rms=0.770945Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.770945Jy sigma=0.000702 ! Fit after self-cal, rms=0.798938Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=6.728 mas, bpa=-2.307 degrees ! Estimated noise=575.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224621 Jy ! Component: 100 - total flux cleaned = 0.00247212 Jy ! Component: 150 - total flux cleaned = 0.00260641 Jy ! Component: 200 - total flux cleaned = 0.00268049 Jy ! Total flux subtracted in 200 components = 0.00268049 Jy ! Clean residual min=-0.002702 max=0.002264 Jy/beam ! Clean residual mean=0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.200773 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.200773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.798627Jy sigma=0.000701 ! Fit after self-cal, rms=0.798628Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.42797e-05 Jy ! Component: 100 - total flux cleaned = 9.32178e-05 Jy ! Component: 150 - total flux cleaned = 6.81821e-05 Jy ! Component: 200 - total flux cleaned = 6.84462e-05 Jy ! Total flux subtracted in 200 components = 6.84462e-05 Jy ! Clean residual min=-0.002732 max=0.002279 Jy/beam ! Clean residual mean=0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.200841 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.200841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.798562Jy sigma=0.000701 ! Fit after self-cal, rms=0.798563Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.798563Jy sigma=0.000701 ! Fit after self-cal, rms=0.816316Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=10.05 mas, bpa=-2.021 degrees ! Estimated noise=694.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020201 Jy ! Component: 100 - total flux cleaned = 0.00197641 Jy ! Component: 150 - total flux cleaned = 0.00194074 Jy ! Component: 200 - total flux cleaned = 0.00191002 Jy ! Total flux subtracted in 200 components = 0.00191002 Jy ! Clean residual min=-0.002385 max=0.002340 Jy/beam ! Clean residual mean=0.000003 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.202751 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.202751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.816029Jy sigma=0.000701 ! Fit after self-cal, rms=0.816030Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83465e-05 Jy ! Component: 100 - total flux cleaned = -4.06366e-05 Jy ! Component: 150 - total flux cleaned = -5.95099e-05 Jy ! Component: 200 - total flux cleaned = -7.61121e-05 Jy ! Total flux subtracted in 200 components = -7.61121e-05 Jy ! Clean residual min=-0.002388 max=0.002423 Jy/beam ! Clean residual mean=0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.202675 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.202675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.815942Jy sigma=0.000701 ! Fit after self-cal, rms=0.815942Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=6.72 mas, bpa=-2.395 degrees ! Estimated noise=581.936 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 6.72 at -2.395 degrees (North through East) ! Clean map min=-0.0027695 max=0.19158 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=5.777 mas, bpa=-1.497 degrees ! Estimated noise=911.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145981 Jy ! Component: 100 - total flux cleaned = 0.181306 Jy ! Component: 150 - total flux cleaned = 0.195757 Jy ! Component: 200 - total flux cleaned = 0.202299 Jy ! Total flux subtracted in 200 components = 0.202299 Jy ! Clean residual min=-0.003093 max=0.003080 Jy/beam ! Clean residual mean=0.000001 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.202299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.202299 Jy ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=6.72 mas, bpa=-2.395 degrees ! Estimated noise=581.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253585 Jy ! Component: 100 - total flux cleaned = 0.00263998 Jy ! Component: 150 - total flux cleaned = 0.00264326 Jy ! Component: 200 - total flux cleaned = 0.00255013 Jy ! Total flux subtracted in 200 components = 0.00255013 Jy ! Clean residual min=-0.002783 max=0.002388 Jy/beam ! Clean residual mean=0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.204849 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.204849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=10.05 mas, bpa=-2.021 degrees ! Estimated noise=694.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135937 Jy ! Component: 100 - total flux cleaned = -0.00150948 Jy ! Component: 150 - total flux cleaned = -0.00160754 Jy ! Component: 200 - total flux cleaned = -0.00170792 Jy ! Total flux subtracted in 200 components = -0.00170792 Jy ! Clean residual min=-0.002383 max=0.002461 Jy/beam ! Clean residual mean=0.000003 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.203141 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.22188e-05 Jy ! Component: 100 - total flux cleaned = -0.000152802 Jy ! Component: 150 - total flux cleaned = -0.000201571 Jy ! Component: 200 - total flux cleaned = -0.000245516 Jy ! Total flux subtracted in 200 components = -0.000245516 Jy ! Clean residual min=-0.002399 max=0.002480 Jy/beam ! Clean residual mean=0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.202896 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.202896 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=6.72 mas, bpa=-2.395 degrees ! Estimated noise=581.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587539 Jy ! Component: 100 - total flux cleaned = 0.00056107 Jy ! Component: 150 - total flux cleaned = 0.000535422 Jy ! Component: 200 - total flux cleaned = 0.000513023 Jy ! Total flux subtracted in 200 components = 0.000513023 Jy ! Clean residual min=-0.002841 max=0.002419 Jy/beam ! Clean residual mean=0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.203409 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.203409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.815822Jy sigma=0.000701 ! Fit after self-cal, rms=0.815822Jy sigma=0.000701 wmodel J0656+3209_S_2017_05_27_pus_map.mod ! Writing 39 model components to file: J0656+3209_S_2017_05_27_pus_map.mod wobs J0656+3209_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0656+3209_S_2017_05_27_pus_uvs.fits wwins J0656+3209_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0656+3209_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668408 Jy ! Component: 100 - total flux cleaned = -0.000922178 Jy ! Component: 150 - total flux cleaned = -0.00127729 Jy ! Component: 200 - total flux cleaned = -0.00154254 Jy ! Component: 250 - total flux cleaned = -0.0017625 Jy ! Component: 300 - total flux cleaned = -0.00194061 Jy ! Component: 350 - total flux cleaned = -0.00197566 Jy ! Component: 400 - total flux cleaned = -0.00214519 Jy ! Component: 450 - total flux cleaned = -0.00221142 Jy ! Component: 500 - total flux cleaned = -0.00230908 Jy ! Component: 550 - total flux cleaned = -0.00240493 Jy ! Component: 600 - total flux cleaned = -0.00246794 Jy ! Component: 650 - total flux cleaned = -0.00259185 Jy ! Component: 700 - total flux cleaned = -0.00268311 Jy ! Component: 750 - total flux cleaned = -0.00286232 Jy ! Component: 800 - total flux cleaned = -0.00289125 Jy ! Component: 850 - total flux cleaned = -0.0029785 Jy ! Component: 900 - total flux cleaned = -0.00312187 Jy ! Component: 950 - total flux cleaned = -0.0031503 Jy ! Component: 1000 - total flux cleaned = -0.00320592 Jy ! Component: 1050 - total flux cleaned = -0.00326077 Jy ! Component: 1100 - total flux cleaned = -0.00328809 Jy ! Component: 1150 - total flux cleaned = -0.00336888 Jy ! Component: 1200 - total flux cleaned = -0.00336863 Jy ! Component: 1250 - total flux cleaned = -0.00339497 Jy ! Component: 1300 - total flux cleaned = -0.00347379 Jy ! Component: 1350 - total flux cleaned = -0.00355183 Jy ! Component: 1400 - total flux cleaned = -0.00357741 Jy ! Component: 1450 - total flux cleaned = -0.00362844 Jy ! Component: 1500 - total flux cleaned = -0.00365365 Jy ! Component: 1550 - total flux cleaned = -0.00372893 Jy ! Component: 1600 - total flux cleaned = -0.00367921 Jy ! Component: 1650 - total flux cleaned = -0.00367953 Jy ! Component: 1700 - total flux cleaned = -0.00387545 Jy ! Component: 1750 - total flux cleaned = -0.00387509 Jy ! Component: 1800 - total flux cleaned = -0.00392313 Jy ! Component: 1850 - total flux cleaned = -0.00401875 Jy ! Component: 1900 - total flux cleaned = -0.00406616 Jy ! Component: 1950 - total flux cleaned = -0.00416035 Jy ! Component: 2000 - total flux cleaned = -0.00418385 Jy ! Component: 2050 - total flux cleaned = -0.00425367 Jy ! Component: 2100 - total flux cleaned = -0.00432277 Jy ! Component: 2150 - total flux cleaned = -0.00436876 Jy ! Component: 2200 - total flux cleaned = -0.00443686 Jy ! Component: 2250 - total flux cleaned = -0.00457216 Jy ! Component: 2300 - total flux cleaned = -0.00466156 Jy ! Component: 2350 - total flux cleaned = -0.00470602 Jy ! Component: 2400 - total flux cleaned = -0.00483828 Jy ! Component: 2450 - total flux cleaned = -0.00494782 Jy ! Component: 2500 - total flux cleaned = -0.00499109 Jy ! Component: 2550 - total flux cleaned = -0.00509924 Jy ! Component: 2600 - total flux cleaned = -0.00514237 Jy ! Component: 2650 - total flux cleaned = -0.00527033 Jy ! Component: 2700 - total flux cleaned = -0.00537618 Jy ! Component: 2750 - total flux cleaned = -0.0054814 Jy ! Component: 2800 - total flux cleaned = -0.00550235 Jy ! Component: 2850 - total flux cleaned = -0.00560635 Jy ! Component: 2900 - total flux cleaned = -0.00570955 Jy ! Component: 2950 - total flux cleaned = -0.00581217 Jy ! Component: 3000 - total flux cleaned = -0.00589375 Jy ! Component: 3050 - total flux cleaned = -0.00593424 Jy ! Component: 3100 - total flux cleaned = -0.00599471 Jy ! Component: 3150 - total flux cleaned = -0.00607494 Jy ! Component: 3200 - total flux cleaned = -0.00611483 Jy ! Component: 3250 - total flux cleaned = -0.00625345 Jy ! Component: 3300 - total flux cleaned = -0.00627305 Jy ! Component: 3350 - total flux cleaned = -0.00629255 Jy ! Component: 3400 - total flux cleaned = -0.00633161 Jy ! Component: 3450 - total flux cleaned = -0.00638988 Jy ! Component: 3500 - total flux cleaned = -0.00646704 Jy ! Component: 3550 - total flux cleaned = -0.00654373 Jy ! Component: 3600 - total flux cleaned = -0.00658181 Jy ! Component: 3650 - total flux cleaned = -0.00665765 Jy ! Component: 3700 - total flux cleaned = -0.00665783 Jy ! Component: 3750 - total flux cleaned = -0.00673284 Jy ! Component: 3800 - total flux cleaned = -0.00682621 Jy ! Component: 3850 - total flux cleaned = -0.00682635 Jy ! Component: 3900 - total flux cleaned = -0.00690023 Jy ! Component: 3950 - total flux cleaned = -0.00690028 Jy ! Component: 4000 - total flux cleaned = -0.00695514 Jy ! Component: 4050 - total flux cleaned = -0.00711875 Jy ! Total flux subtracted in 4096 components = -0.007137 Jy ! Clean residual min=-0.001189 max=0.001295 Jy/beam ! Clean residual mean=-0.000000 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.196272 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 337 components and 0.196272 Jy ![Exited script file: muppet] wmap "J0656+3209_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 6.72 at -2.395 degrees (North through East) ! Clean map min=-0.0021115 max=0.19219 Jy/beam ! Writing clean map to FITS file: J0656+3209_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.192189 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000340566 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.531612 0.531612 1.06322 2.12645 4.25289 8.50579 17.0116 34.0232 68.0463 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.192 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 6.72 at -2.395 degrees (North through East) ! Clean map min=-0.0021115 max=0.19219 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0656+3209_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:59:40 2019