! Started logfile: J0655-2416_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:29 2019 obs J0655-2416_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0655-2416_S_2017_01_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.689766 visibilities/baseline/integration-bin. ! Found source: J0655-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 9436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0655-2416_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956372Jy sigma=0.005662 ! Fit after self-cal, rms=0.928496Jy sigma=0.005560 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=12.21 mas, bpa=14.62 degrees ! Estimated noise=1640.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0823979 Jy ! Component: 100 - total flux cleaned = 0.103746 Jy ! Total flux subtracted in 100 components = 0.103746 Jy ! Clean residual min=-0.006751 max=0.009092 Jy/beam ! Clean residual mean=0.000041 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.103746 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.103746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340997Jy sigma=0.000673 ! Fit after self-cal, rms=0.340998Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.663 mas, bmaj=13.34 mas, bpa=14.16 degrees ! Estimated noise=1281.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129173 Jy ! Component: 100 - total flux cleaned = 0.0190889 Jy ! Component: 150 - total flux cleaned = 0.0225435 Jy ! Component: 200 - total flux cleaned = 0.0246259 Jy ! Total flux subtracted in 200 components = 0.0246259 Jy ! Clean residual min=-0.004097 max=0.004181 Jy/beam ! Clean residual mean=0.000005 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.128372 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 0.128372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339364Jy sigma=0.000667 ! Fit after self-cal, rms=0.339207Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.04 KP 1.05 ! LA 1.07 MK 1.00* NL 0.94 OV 1.07 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 1.08 KP 1.01 ! LA 0.98 MK 1.00* NL 1.07 OV 1.04 ! PT 1.11 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.11 KP 1.02 ! LA 1.03 MK 1.00* NL 1.00 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.90 KP 0.47 ! LA 0.22 MK 1.00* NL 0.47 OV 0.81 ! PT 0.82 SC 0.98 ! ! ! Fit before self-cal, rms=0.339207Jy sigma=0.000666 ! Fit after self-cal, rms=0.129559Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=13.41 mas, bpa=14.07 degrees ! Estimated noise=1277.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761685 Jy ! Component: 100 - total flux cleaned = 0.000795653 Jy ! Component: 150 - total flux cleaned = 0.000768852 Jy ! Component: 200 - total flux cleaned = 0.000769103 Jy ! Total flux subtracted in 200 components = 0.000769103 Jy ! Clean residual min=-0.003388 max=0.003322 Jy/beam ! Clean residual mean=0.000007 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.129141 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.129141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129538Jy sigma=0.000659 ! Fit after self-cal, rms=0.128674Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128674Jy sigma=0.000658 ! Fit after self-cal, rms=0.126321Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.689 mas, bmaj=13.38 mas, bpa=14.08 degrees ! Estimated noise=1279.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535203 Jy ! Component: 100 - total flux cleaned = 0.000580716 Jy ! Component: 150 - total flux cleaned = 0.000619647 Jy ! Component: 200 - total flux cleaned = 0.000620142 Jy ! Total flux subtracted in 200 components = 0.000620142 Jy ! Clean residual min=-0.003258 max=0.003181 Jy/beam ! Clean residual mean=0.000013 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.129762 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.129762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126310Jy sigma=0.000657 ! Fit after self-cal, rms=0.126238Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.1671e-05 Jy ! Component: 100 - total flux cleaned = 9.90046e-05 Jy ! Component: 150 - total flux cleaned = 0.000114274 Jy ! Component: 200 - total flux cleaned = 0.000113726 Jy ! Total flux subtracted in 200 components = 0.000113726 Jy ! Clean residual min=-0.003300 max=0.003212 Jy/beam ! Clean residual mean=0.000012 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.129875 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.129875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126232Jy sigma=0.000657 ! Fit after self-cal, rms=0.126230Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126230Jy sigma=0.000657 ! Fit after self-cal, rms=0.126029Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.34 mas, bpa=14.12 degrees ! Estimated noise=1278.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.3781e-05 Jy ! Component: 100 - total flux cleaned = 2.59923e-05 Jy ! Component: 150 - total flux cleaned = 4.17393e-05 Jy ! Component: 200 - total flux cleaned = 4.17761e-05 Jy ! Total flux subtracted in 200 components = 4.17761e-05 Jy ! Clean residual min=-0.003185 max=0.003096 Jy/beam ! Clean residual mean=0.000016 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.129917 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.129917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126021Jy sigma=0.000657 ! Fit after self-cal, rms=0.126062Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.19434e-05 Jy ! Component: 100 - total flux cleaned = 6.21318e-05 Jy ! Component: 150 - total flux cleaned = 6.17151e-05 Jy ! Component: 200 - total flux cleaned = 6.13144e-05 Jy ! Total flux subtracted in 200 components = 6.13144e-05 Jy ! Clean residual min=-0.003253 max=0.003111 Jy/beam ! Clean residual mean=0.000015 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.129978 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.129978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126056Jy sigma=0.000656 ! Fit after self-cal, rms=0.126056Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126056Jy sigma=0.000656 ! Fit after self-cal, rms=0.126377Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=18.55 mas, bpa=5.146 degrees ! Estimated noise=1521.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310763 Jy ! Component: 100 - total flux cleaned = 0.000368104 Jy ! Component: 150 - total flux cleaned = 0.000389774 Jy ! Component: 200 - total flux cleaned = 0.000417785 Jy ! Total flux subtracted in 200 components = 0.000417785 Jy ! Clean residual min=-0.003230 max=0.003595 Jy/beam ! Clean residual mean=0.000030 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.130396 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.130396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126373Jy sigma=0.000656 ! Fit after self-cal, rms=0.126392Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85193e-05 Jy ! Component: 100 - total flux cleaned = 5.08502e-05 Jy ! Component: 150 - total flux cleaned = 6.49253e-05 Jy ! Component: 200 - total flux cleaned = 7.1661e-05 Jy ! Total flux subtracted in 200 components = 7.1661e-05 Jy ! Clean residual min=-0.003224 max=0.003576 Jy/beam ! Clean residual mean=0.000030 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.130468 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.130468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126391Jy sigma=0.000656 ! Fit after self-cal, rms=0.126393Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.33 mas, bpa=14.14 degrees ! Estimated noise=1280.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.33 at 14.14 degrees (North through East) ! Clean map min=-0.0031288 max=0.1068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=12.16 mas, bpa=14.6 degrees ! Estimated noise=1616.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0808879 Jy ! Component: 100 - total flux cleaned = 0.102879 Jy ! Component: 150 - total flux cleaned = 0.113805 Jy ! Component: 200 - total flux cleaned = 0.120002 Jy ! Total flux subtracted in 200 components = 0.120002 Jy ! Clean residual min=-0.005033 max=0.004261 Jy/beam ! Clean residual mean=0.000022 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.120002 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.120002 Jy ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.33 mas, bpa=14.14 degrees ! Estimated noise=1280.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496679 Jy ! Component: 100 - total flux cleaned = 0.00767309 Jy ! Component: 150 - total flux cleaned = 0.00926435 Jy ! Component: 200 - total flux cleaned = 0.00954902 Jy ! Total flux subtracted in 200 components = 0.00954902 Jy ! Clean residual min=-0.003323 max=0.003223 Jy/beam ! Clean residual mean=0.000018 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.129551 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 0.129551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=18.55 mas, bpa=5.146 degrees ! Estimated noise=1521.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843703 Jy ! Component: 100 - total flux cleaned = 0.00100422 Jy ! Component: 150 - total flux cleaned = 0.00102246 Jy ! Component: 200 - total flux cleaned = 0.00103874 Jy ! Total flux subtracted in 200 components = 0.00103874 Jy ! Clean residual min=-0.003364 max=0.003590 Jy/beam ! Clean residual mean=0.000031 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.13059 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44704e-05 Jy ! Component: 100 - total flux cleaned = 1.45675e-05 Jy ! Component: 150 - total flux cleaned = 2.67045e-05 Jy ! Component: 200 - total flux cleaned = 4.8091e-05 Jy ! Total flux subtracted in 200 components = 4.8091e-05 Jy ! Clean residual min=-0.003304 max=0.003585 Jy/beam ! Clean residual mean=0.000031 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.130638 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.130638 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=13.33 mas, bpa=14.14 degrees ! Estimated noise=1280.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05928e-05 Jy ! Component: 100 - total flux cleaned = 1.07355e-05 Jy ! Component: 150 - total flux cleaned = -2.26262e-05 Jy ! Component: 200 - total flux cleaned = -5.17922e-05 Jy ! Total flux subtracted in 200 components = -5.17922e-05 Jy ! Clean residual min=-0.003216 max=0.003070 Jy/beam ! Clean residual mean=0.000017 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.130586 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.130586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126401Jy sigma=0.000656 ! Fit after self-cal, rms=0.126403Jy sigma=0.000656 wmodel J0655-2416_S_2017_01_16_pus_map.mod ! Writing 78 model components to file: J0655-2416_S_2017_01_16_pus_map.mod wobs J0655-2416_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0655-2416_S_2017_01_16_pus_uvs.fits wwins J0655-2416_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0655-2416_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122098 Jy ! Component: 100 - total flux cleaned = 0.000140669 Jy ! Component: 150 - total flux cleaned = 0.00028932 Jy ! Component: 200 - total flux cleaned = 0.000429415 Jy ! Component: 250 - total flux cleaned = 0.000564076 Jy ! Component: 300 - total flux cleaned = 0.000607563 Jy ! Component: 350 - total flux cleaned = 0.000481705 Jy ! Component: 400 - total flux cleaned = 0.000319283 Jy ! Component: 450 - total flux cleaned = 0.000161827 Jy ! Component: 500 - total flux cleaned = -2.88991e-05 Jy ! Component: 550 - total flux cleaned = -2.83951e-05 Jy ! Component: 600 - total flux cleaned = -6.57417e-05 Jy ! Component: 650 - total flux cleaned = -0.00013765 Jy ! Component: 700 - total flux cleaned = -0.000103521 Jy ! Component: 750 - total flux cleaned = -0.000104534 Jy ! Component: 800 - total flux cleaned = -0.000171378 Jy ! Component: 850 - total flux cleaned = -0.000203441 Jy ! Component: 900 - total flux cleaned = -0.000202648 Jy ! Component: 950 - total flux cleaned = -0.000264789 Jy ! Component: 1000 - total flux cleaned = -0.000294823 Jy ! Component: 1050 - total flux cleaned = -0.000354495 Jy ! Component: 1100 - total flux cleaned = -0.000384327 Jy ! Component: 1150 - total flux cleaned = -0.000559525 Jy ! Component: 1200 - total flux cleaned = -0.000760121 Jy ! Component: 1250 - total flux cleaned = -0.000957429 Jy ! Component: 1300 - total flux cleaned = -0.00112401 Jy ! Component: 1350 - total flux cleaned = -0.00131508 Jy ! Component: 1400 - total flux cleaned = -0.00147648 Jy ! Component: 1450 - total flux cleaned = -0.00163595 Jy ! Component: 1500 - total flux cleaned = -0.00184573 Jy ! Component: 1550 - total flux cleaned = -0.00197452 Jy ! Component: 1600 - total flux cleaned = -0.00207692 Jy ! Component: 1650 - total flux cleaned = -0.00222882 Jy ! Component: 1700 - total flux cleaned = -0.0023786 Jy ! Component: 1750 - total flux cleaned = -0.00252619 Jy ! Component: 1800 - total flux cleaned = -0.00259902 Jy ! Component: 1850 - total flux cleaned = -0.00262313 Jy ! Component: 1900 - total flux cleaned = -0.00267109 Jy ! Component: 1950 - total flux cleaned = -0.00281231 Jy ! Component: 2000 - total flux cleaned = -0.00288206 Jy ! Component: 2050 - total flux cleaned = -0.00295083 Jy ! Component: 2100 - total flux cleaned = -0.00292796 Jy ! Component: 2150 - total flux cleaned = -0.00301832 Jy ! Component: 2200 - total flux cleaned = -0.00304014 Jy ! Component: 2250 - total flux cleaned = -0.00301806 Jy ! Component: 2300 - total flux cleaned = -0.00312727 Jy ! Component: 2350 - total flux cleaned = -0.00304054 Jy ! Component: 2400 - total flux cleaned = -0.00308378 Jy ! Component: 2450 - total flux cleaned = -0.00308388 Jy ! Component: 2500 - total flux cleaned = -0.00312625 Jy ! Component: 2550 - total flux cleaned = -0.00314729 Jy ! Component: 2600 - total flux cleaned = -0.00316801 Jy ! Component: 2650 - total flux cleaned = -0.00320924 Jy ! Component: 2700 - total flux cleaned = -0.00320937 Jy ! Component: 2750 - total flux cleaned = -0.00329009 Jy ! Component: 2800 - total flux cleaned = -0.00325013 Jy ! Component: 2850 - total flux cleaned = -0.00331004 Jy ! Component: 2900 - total flux cleaned = -0.00331009 Jy ! Component: 2950 - total flux cleaned = -0.00340813 Jy ! Component: 3000 - total flux cleaned = -0.00342741 Jy ! Component: 3050 - total flux cleaned = -0.00338876 Jy ! Component: 3100 - total flux cleaned = -0.00340801 Jy ! Component: 3150 - total flux cleaned = -0.00336977 Jy ! Component: 3200 - total flux cleaned = -0.00333175 Jy ! Component: 3250 - total flux cleaned = -0.00325659 Jy ! Component: 3300 - total flux cleaned = -0.00327536 Jy ! Component: 3350 - total flux cleaned = -0.00323818 Jy ! Component: 3400 - total flux cleaned = -0.00320104 Jy ! Component: 3450 - total flux cleaned = -0.00320109 Jy ! Component: 3500 - total flux cleaned = -0.00312808 Jy ! Component: 3550 - total flux cleaned = -0.00307349 Jy ! Component: 3600 - total flux cleaned = -0.00298312 Jy ! Component: 3650 - total flux cleaned = -0.00298316 Jy ! Component: 3700 - total flux cleaned = -0.00298312 Jy ! Component: 3750 - total flux cleaned = -0.00289406 Jy ! Component: 3800 - total flux cleaned = -0.00285865 Jy ! Component: 3850 - total flux cleaned = -0.00289387 Jy ! Component: 3900 - total flux cleaned = -0.00285874 Jy ! Component: 3950 - total flux cleaned = -0.0028412 Jy ! Component: 4000 - total flux cleaned = -0.00282383 Jy ! Component: 4050 - total flux cleaned = -0.00284127 Jy ! Total flux subtracted in 4096 components = -0.00278935 Jy ! Clean residual min=-0.000966 max=0.001068 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.127797 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 388 components and 0.127797 Jy ![Exited script file: muppet] wmap "J0655-2416_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.33 at 14.14 degrees (North through East) ! Clean map min=-0.0024669 max=0.10705 Jy/beam ! Writing clean map to FITS file: J0655-2416_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320684 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.898727 0.898727 1.79745 3.59491 7.18982 14.3796 28.7593 57.5185 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 13.33 at 14.14 degrees (North through East) ! Clean map min=-0.0024669 max=0.10705 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0655-2416_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:34 2019