! Started logfile: J0654+5042_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:24 2019 obs J0654+5042_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0654+5042_S_2017_01_16_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613248 visibilities/baseline/integration-bin. ! Found source: J0654+5042 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 11480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0654+5042_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 452 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.868314Jy sigma=0.007404 ! Fit after self-cal, rms=0.859529Jy sigma=0.007345 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=5.385 mas, bpa=25.9 degrees ! Estimated noise=1221.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112969 Jy ! Component: 100 - total flux cleaned = 0.137721 Jy ! Total flux subtracted in 100 components = 0.137721 Jy ! Clean residual min=-0.005500 max=0.007673 Jy/beam ! Clean residual mean=0.000008 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.137721 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.137721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090082Jy sigma=0.000683 ! Fit after self-cal, rms=0.090064Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=6.263 mas, bpa=18.78 degrees ! Estimated noise=838.045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885558 Jy ! Component: 100 - total flux cleaned = 0.0123914 Jy ! Component: 150 - total flux cleaned = 0.0137231 Jy ! Component: 200 - total flux cleaned = 0.0141392 Jy ! Total flux subtracted in 200 components = 0.0141392 Jy ! Clean residual min=-0.004332 max=0.004464 Jy/beam ! Clean residual mean=0.000037 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.15186 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.15186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089452Jy sigma=0.000675 ! Fit after self-cal, rms=0.089440Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 0.90 KP 1.00 ! LA 1.00 MK 1.00* NL 0.87 OV 0.97 ! PT 1.10 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 0.99 KP 0.91 ! LA 0.98 MK 1.00* NL 1.02 OV 1.03 ! PT 1.09 SC 1.12 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.98 HN 0.95 KP 0.98 ! LA 1.00 MK 1.00* NL 0.96 OV 0.93 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.96 KP 1.00* ! LA 1.09 MK 1.00* NL 1.00* OV 0.96 ! PT 1.11 SC 1.41 ! ! ! Fit before self-cal, rms=0.089440Jy sigma=0.000675 ! Fit after self-cal, rms=0.096970Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.602 mas, bmaj=6.25 mas, bpa=17.05 degrees ! Estimated noise=832.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633308 Jy ! Component: 100 - total flux cleaned = 0.000696255 Jy ! Component: 150 - total flux cleaned = 0.000696395 Jy ! Component: 200 - total flux cleaned = 0.000698618 Jy ! Total flux subtracted in 200 components = 0.000698618 Jy ! Clean residual min=-0.003773 max=0.003380 Jy/beam ! Clean residual mean=0.000034 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.152558 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.152558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096928Jy sigma=0.000664 ! Fit after self-cal, rms=0.097075Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097075Jy sigma=0.000663 ! Fit after self-cal, rms=0.100617Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.548 mas, bmaj=6.246 mas, bpa=17.33 degrees ! Estimated noise=833.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159828 Jy ! Component: 100 - total flux cleaned = 0.00178238 Jy ! Component: 150 - total flux cleaned = 0.00188416 Jy ! Component: 200 - total flux cleaned = 0.00197167 Jy ! Total flux subtracted in 200 components = 0.00197167 Jy ! Clean residual min=-0.002857 max=0.002207 Jy/beam ! Clean residual mean=0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.15453 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.15453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100591Jy sigma=0.000655 ! Fit after self-cal, rms=0.100700Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111679 Jy ! Component: 100 - total flux cleaned = 5.7149e-05 Jy ! Component: 150 - total flux cleaned = 6.63882e-05 Jy ! Component: 200 - total flux cleaned = 7.52937e-05 Jy ! Total flux subtracted in 200 components = 7.52937e-05 Jy ! Clean residual min=-0.002883 max=0.002249 Jy/beam ! Clean residual mean=0.000003 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.154605 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.154605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100697Jy sigma=0.000655 ! Fit after self-cal, rms=0.100697Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100697Jy sigma=0.000655 ! Fit after self-cal, rms=0.100635Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=6.241 mas, bpa=17.32 degrees ! Estimated noise=833.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100999 Jy ! Component: 100 - total flux cleaned = 0.00119053 Jy ! Component: 150 - total flux cleaned = 0.0012895 Jy ! Component: 200 - total flux cleaned = 0.00137577 Jy ! Total flux subtracted in 200 components = 0.00137577 Jy ! Clean residual min=-0.002769 max=0.002114 Jy/beam ! Clean residual mean=0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.155981 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.155981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100623Jy sigma=0.000655 ! Fit after self-cal, rms=0.100634Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.64344e-05 Jy ! Component: 100 - total flux cleaned = 0.000109295 Jy ! Component: 150 - total flux cleaned = 0.000123604 Jy ! Component: 200 - total flux cleaned = 0.000143856 Jy ! Total flux subtracted in 200 components = 0.000143856 Jy ! Clean residual min=-0.002767 max=0.002120 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.156125 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.156125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100632Jy sigma=0.000655 ! Fit after self-cal, rms=0.100632Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100632Jy sigma=0.000655 ! Fit after self-cal, rms=0.100560Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=8.699 mas, bpa=-1.526 degrees ! Estimated noise=1005.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000790592 Jy ! Component: 100 - total flux cleaned = 0.000955222 Jy ! Component: 150 - total flux cleaned = 0.000984837 Jy ! Component: 200 - total flux cleaned = 0.000985508 Jy ! Total flux subtracted in 200 components = 0.000985508 Jy ! Clean residual min=-0.002488 max=0.002311 Jy/beam ! Clean residual mean=0.000007 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.157111 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.157111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100558Jy sigma=0.000655 ! Fit after self-cal, rms=0.100559Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.19075e-05 Jy ! Component: 100 - total flux cleaned = 5.55343e-05 Jy ! Component: 150 - total flux cleaned = 4.77234e-05 Jy ! Component: 200 - total flux cleaned = 4.11796e-05 Jy ! Total flux subtracted in 200 components = 4.11796e-05 Jy ! Clean residual min=-0.002472 max=0.002292 Jy/beam ! Clean residual mean=0.000007 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.157152 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.157152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100559Jy sigma=0.000655 ! Fit after self-cal, rms=0.100557Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.506 mas, bmaj=6.237 mas, bpa=17.34 degrees ! Estimated noise=834.518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.506 x 6.237 at 17.34 degrees (North through East) ! Clean map min=-0.0026038 max=0.14535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=5.393 mas, bpa=24.36 degrees ! Estimated noise=1216.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112326 Jy ! Component: 100 - total flux cleaned = 0.137587 Jy ! Component: 150 - total flux cleaned = 0.14691 Jy ! Component: 200 - total flux cleaned = 0.151223 Jy ! Total flux subtracted in 200 components = 0.151223 Jy ! Clean residual min=-0.003701 max=0.003523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.151223 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.151223 Jy ! Inverting map and beam ! Estimated beam: bmin=4.506 mas, bmaj=6.237 mas, bpa=17.34 degrees ! Estimated noise=834.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311357 Jy ! Component: 100 - total flux cleaned = 0.00446062 Jy ! Component: 150 - total flux cleaned = 0.00476423 Jy ! Component: 200 - total flux cleaned = 0.00498346 Jy ! Total flux subtracted in 200 components = 0.00498346 Jy ! Clean residual min=-0.002768 max=0.002094 Jy/beam ! Clean residual mean=0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.156207 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.156207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=8.699 mas, bpa=-1.526 degrees ! Estimated noise=1005.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657008 Jy ! Component: 100 - total flux cleaned = 0.000700102 Jy ! Component: 150 - total flux cleaned = 0.000700611 Jy ! Component: 200 - total flux cleaned = 0.000700452 Jy ! Total flux subtracted in 200 components = 0.000700452 Jy ! Clean residual min=-0.002471 max=0.002258 Jy/beam ! Clean residual mean=0.000007 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.156907 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.30903e-06 Jy ! Component: 100 - total flux cleaned = -1.378e-05 Jy ! Component: 150 - total flux cleaned = -1.36746e-05 Jy ! Component: 200 - total flux cleaned = -1.33374e-05 Jy ! Total flux subtracted in 200 components = -1.33374e-05 Jy ! Clean residual min=-0.002466 max=0.002262 Jy/beam ! Clean residual mean=0.000007 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.156894 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.156894 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.506 mas, bmaj=6.237 mas, bpa=17.34 degrees ! Estimated noise=834.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05153e-05 Jy ! Component: 100 - total flux cleaned = -1.21465e-05 Jy ! Component: 150 - total flux cleaned = -2.1588e-05 Jy ! Component: 200 - total flux cleaned = -3.09655e-05 Jy ! Total flux subtracted in 200 components = -3.09655e-05 Jy ! Clean residual min=-0.002702 max=0.002053 Jy/beam ! Clean residual mean=0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.156863 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.156863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100551Jy sigma=0.000655 ! Fit after self-cal, rms=0.100555Jy sigma=0.000655 wmodel J0654+5042_S_2017_01_16_pus_map.mod ! Writing 55 model components to file: J0654+5042_S_2017_01_16_pus_map.mod wobs J0654+5042_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0654+5042_S_2017_01_16_pus_uvs.fits wwins J0654+5042_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0654+5042_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869983 Jy ! Component: 100 - total flux cleaned = -0.000687973 Jy ! Component: 150 - total flux cleaned = -0.000481353 Jy ! Component: 200 - total flux cleaned = -0.00028377 Jy ! Component: 250 - total flux cleaned = -0.000155663 Jy ! Component: 300 - total flux cleaned = 6.09417e-05 Jy ! Component: 350 - total flux cleaned = 0.000150849 Jy ! Component: 400 - total flux cleaned = 0.000267782 Jy ! Component: 450 - total flux cleaned = 0.000210623 Jy ! Component: 500 - total flux cleaned = 0.000211107 Jy ! Component: 550 - total flux cleaned = 0.000184407 Jy ! Component: 600 - total flux cleaned = 0.000157494 Jy ! Component: 650 - total flux cleaned = 0.00010507 Jy ! Component: 700 - total flux cleaned = 2.71874e-05 Jy ! Component: 750 - total flux cleaned = 2.1209e-06 Jy ! Component: 800 - total flux cleaned = 5.1808e-05 Jy ! Component: 850 - total flux cleaned = 2.68426e-05 Jy ! Component: 900 - total flux cleaned = 5.11533e-05 Jy ! Component: 950 - total flux cleaned = 7.51006e-05 Jy ! Component: 1000 - total flux cleaned = 5.15875e-05 Jy ! Component: 1050 - total flux cleaned = 7.48539e-05 Jy ! Component: 1100 - total flux cleaned = 5.16938e-05 Jy ! Component: 1150 - total flux cleaned = 6.84996e-06 Jy ! Component: 1200 - total flux cleaned = 2.89408e-05 Jy ! Component: 1250 - total flux cleaned = -1.58043e-05 Jy ! Component: 1300 - total flux cleaned = -3.77851e-05 Jy ! Component: 1350 - total flux cleaned = -0.000102336 Jy ! Component: 1400 - total flux cleaned = -8.08011e-05 Jy ! Component: 1450 - total flux cleaned = -0.000123537 Jy ! Component: 1500 - total flux cleaned = -0.000185998 Jy ! Component: 1550 - total flux cleaned = -0.00018629 Jy ! Component: 1600 - total flux cleaned = -0.000308766 Jy ! Component: 1650 - total flux cleaned = -0.000328532 Jy ! Component: 1700 - total flux cleaned = -0.000368946 Jy ! Component: 1750 - total flux cleaned = -0.000428625 Jy ! Component: 1800 - total flux cleaned = -0.00048783 Jy ! Component: 1850 - total flux cleaned = -0.000584663 Jy ! Component: 1900 - total flux cleaned = -0.000661021 Jy ! Component: 1950 - total flux cleaned = -0.000736886 Jy ! Component: 2000 - total flux cleaned = -0.000811938 Jy ! Component: 2050 - total flux cleaned = -0.000867963 Jy ! Component: 2100 - total flux cleaned = -0.000904747 Jy ! Component: 2150 - total flux cleaned = -0.000996242 Jy ! Component: 2200 - total flux cleaned = -0.00106861 Jy ! Component: 2250 - total flux cleaned = -0.00110455 Jy ! Component: 2300 - total flux cleaned = -0.00115795 Jy ! Component: 2350 - total flux cleaned = -0.00121107 Jy ! Component: 2400 - total flux cleaned = -0.00128072 Jy ! Component: 2450 - total flux cleaned = -0.00131541 Jy ! Component: 2500 - total flux cleaned = -0.00136689 Jy ! Component: 2550 - total flux cleaned = -0.00141779 Jy ! Component: 2600 - total flux cleaned = -0.00153565 Jy ! Component: 2650 - total flux cleaned = -0.00153562 Jy ! Component: 2700 - total flux cleaned = -0.00156854 Jy ! Component: 2750 - total flux cleaned = -0.00160146 Jy ! Component: 2800 - total flux cleaned = -0.00163404 Jy ! Component: 2850 - total flux cleaned = -0.00168246 Jy ! Component: 2900 - total flux cleaned = -0.00169825 Jy ! Component: 2950 - total flux cleaned = -0.0017302 Jy ! Component: 3000 - total flux cleaned = -0.00184025 Jy ! Component: 3050 - total flux cleaned = -0.00180922 Jy ! Component: 3100 - total flux cleaned = -0.00190206 Jy ! Component: 3150 - total flux cleaned = -0.00184057 Jy ! Component: 3200 - total flux cleaned = -0.0019169 Jy ! Component: 3250 - total flux cleaned = -0.00196205 Jy ! Component: 3300 - total flux cleaned = -0.00196204 Jy ! Component: 3350 - total flux cleaned = -0.00200664 Jy ! Component: 3400 - total flux cleaned = -0.00202169 Jy ! Component: 3450 - total flux cleaned = -0.00203634 Jy ! Component: 3500 - total flux cleaned = -0.0020947 Jy ! Component: 3550 - total flux cleaned = -0.00213805 Jy ! Component: 3600 - total flux cleaned = -0.00216675 Jy ! Component: 3650 - total flux cleaned = -0.00220966 Jy ! Component: 3700 - total flux cleaned = -0.00223805 Jy ! Component: 3750 - total flux cleaned = -0.00226636 Jy ! Component: 3800 - total flux cleaned = -0.00235023 Jy ! Component: 3850 - total flux cleaned = -0.0023917 Jy ! Component: 3900 - total flux cleaned = -0.00235019 Jy ! Component: 3950 - total flux cleaned = -0.00243268 Jy ! Component: 4000 - total flux cleaned = -0.00250077 Jy ! Component: 4050 - total flux cleaned = -0.00254146 Jy ! Total flux subtracted in 4096 components = -0.00252797 Jy ! Clean residual min=-0.000786 max=0.000749 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.154335 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 345 components and 0.154335 Jy ![Exited script file: muppet] wmap "J0654+5042_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.506 x 6.237 at 17.34 degrees (North through East) ! Clean map min=-0.0020157 max=0.14507 Jy/beam ! Writing clean map to FITS file: J0654+5042_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145074 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248502 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.51388 0.51388 1.02776 2.05552 4.11104 8.22208 16.4442 32.8883 65.7766 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.506 x 6.237 at 17.34 degrees (North through East) ! Clean map min=-0.0020157 max=0.14507 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0654+5042_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:29 2019