! Started logfile: J0653-0625_S_2017_07_16_pus_uvs.log on Thu May 9 11:03:22 2019 obs J0653-0625_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0653-0625_S_2017_07_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.770106 visibilities/baseline/integration-bin. ! Found source: J0653-0625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 11644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0653-0625_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 554 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.765432Jy sigma=0.006076 ! Fit after self-cal, rms=0.734720Jy sigma=0.005828 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=6.374 mas, bpa=-4.424 degrees ! Estimated noise=1189.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202169 Jy ! Component: 100 - total flux cleaned = 0.25781 Jy ! Total flux subtracted in 100 components = 0.25781 Jy ! Clean residual min=-0.009822 max=0.022378 Jy/beam ! Clean residual mean=-0.000002 rms=0.002972 Jy/beam ! Combined flux in latest and established models = 0.25781 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.25781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105505Jy sigma=0.000802 ! Fit after self-cal, rms=0.105436Jy sigma=0.000802 ! Inverting map ! Added new window around map position (39.5, -52.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255793 Jy ! Component: 100 - total flux cleaned = 0.0420594 Jy ! Total flux subtracted in 100 components = 0.0420594 Jy ! Clean residual min=-0.007663 max=0.013971 Jy/beam ! Clean residual mean=-0.000002 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.29987 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.29987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097111Jy sigma=0.000731 ! Fit after self-cal, rms=0.096997Jy sigma=0.000730 ! Inverting map ! Added new window around map position (2.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130283 Jy ! Component: 100 - total flux cleaned = 0.0215704 Jy ! Total flux subtracted in 100 components = 0.0215704 Jy ! Clean residual min=-0.006540 max=0.008963 Jy/beam ! Clean residual mean=-0.000003 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.32144 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.32144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095004Jy sigma=0.000713 ! Fit after self-cal, rms=0.094982Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=7.402 mas, bpa=-4.697 degrees ! Estimated noise=953.637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783236 Jy ! Component: 100 - total flux cleaned = 0.0113615 Jy ! Component: 150 - total flux cleaned = 0.0116879 Jy ! Component: 200 - total flux cleaned = 0.0118298 Jy ! Total flux subtracted in 200 components = 0.0118298 Jy ! Clean residual min=-0.006132 max=0.006544 Jy/beam ! Clean residual mean=-0.000002 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.33327 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 0.33327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094116Jy sigma=0.000706 ! Fit after self-cal, rms=0.094107Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.97 KP 1.06 ! LA 1.01 MK 1.06 NL 0.89 OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 1.01 ! LA 0.97 MK 1.01 NL 1.06 OV 1.00 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 1.02 ! LA 0.98 MK 1.02 NL 1.04 OV 0.91 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 1.00 MK 0.99 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.094107Jy sigma=0.000706 ! Fit after self-cal, rms=0.092267Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.422 mas, bpa=-4.512 degrees ! Estimated noise=955.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000820439 Jy ! Component: 100 - total flux cleaned = -0.00126631 Jy ! Component: 150 - total flux cleaned = -0.00174112 Jy ! Component: 200 - total flux cleaned = -0.00206884 Jy ! Total flux subtracted in 200 components = -0.00206884 Jy ! Clean residual min=-0.004925 max=0.005949 Jy/beam ! Clean residual mean=-0.000004 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.331201 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.331201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092031Jy sigma=0.000692 ! Fit after self-cal, rms=0.092030Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092030Jy sigma=0.000692 ! Fit after self-cal, rms=0.091386Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=7.47 mas, bpa=-4.302 degrees ! Estimated noise=962.429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158343 Jy ! Component: 100 - total flux cleaned = -0.00131333 Jy ! Component: 150 - total flux cleaned = -0.00100071 Jy ! Component: 200 - total flux cleaned = -0.000738102 Jy ! Total flux subtracted in 200 components = -0.000738102 Jy ! Clean residual min=-0.004007 max=0.005211 Jy/beam ! Clean residual mean=0.000001 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.330463 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 81 components and 0.330463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091228Jy sigma=0.000677 ! Fit after self-cal, rms=0.091240Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049909 Jy ! Component: 100 - total flux cleaned = 0.00670541 Jy ! Component: 150 - total flux cleaned = 0.00727341 Jy ! Component: 200 - total flux cleaned = 0.00748621 Jy ! Total flux subtracted in 200 components = 0.00748621 Jy ! Clean residual min=-0.003852 max=0.003845 Jy/beam ! Clean residual mean=-0.000003 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.337949 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.337949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090937Jy sigma=0.000675 ! Fit after self-cal, rms=0.090900Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090900Jy sigma=0.000674 ! Fit after self-cal, rms=0.090288Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=7.474 mas, bpa=-4.365 degrees ! Estimated noise=961.391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166789 Jy ! Component: 100 - total flux cleaned = 0.00206859 Jy ! Component: 150 - total flux cleaned = 0.00223863 Jy ! Component: 200 - total flux cleaned = 0.00239186 Jy ! Total flux subtracted in 200 components = 0.00239186 Jy ! Clean residual min=-0.003071 max=0.002931 Jy/beam ! Clean residual mean=-0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.340341 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.340341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090206Jy sigma=0.000667 ! Fit after self-cal, rms=0.090202Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418557 Jy ! Component: 100 - total flux cleaned = 0.000509776 Jy ! Component: 150 - total flux cleaned = 0.000637134 Jy ! Component: 200 - total flux cleaned = 0.000717608 Jy ! Total flux subtracted in 200 components = 0.000717608 Jy ! Clean residual min=-0.002994 max=0.002808 Jy/beam ! Clean residual mean=-0.000003 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.341059 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.341059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090165Jy sigma=0.000667 ! Fit after self-cal, rms=0.090161Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090161Jy sigma=0.000667 ! Fit after self-cal, rms=0.090199Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.906 mas, bmaj=13.1 mas, bpa=-5.451 degrees ! Estimated noise=1269.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119555 Jy ! Component: 100 - total flux cleaned = 0.00141966 Jy ! Component: 150 - total flux cleaned = 0.00149928 Jy ! Component: 200 - total flux cleaned = 0.00160762 Jy ! Total flux subtracted in 200 components = 0.00160762 Jy ! Clean residual min=-0.002994 max=0.003181 Jy/beam ! Clean residual mean=-0.000007 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.342666 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 144 components and 0.342666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090184Jy sigma=0.000667 ! Fit after self-cal, rms=0.090179Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.1636e-05 Jy ! Component: 100 - total flux cleaned = 0.000140246 Jy ! Component: 150 - total flux cleaned = 0.0002022 Jy ! Component: 200 - total flux cleaned = 0.000286102 Jy ! Total flux subtracted in 200 components = 0.000286102 Jy ! Clean residual min=-0.002937 max=0.003155 Jy/beam ! Clean residual mean=-0.000007 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.342953 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.342953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090173Jy sigma=0.000667 ! Fit after self-cal, rms=0.090168Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=7.475 mas, bpa=-4.351 degrees ! Estimated noise=960.954 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 7.475 at -4.351 degrees (North through East) ! Clean map min=-0.0027657 max=0.25724 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.438 mas, bpa=-4.165 degrees ! Estimated noise=1218.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203843 Jy ! Component: 100 - total flux cleaned = 0.259773 Jy ! Component: 150 - total flux cleaned = 0.282584 Jy ! Component: 200 - total flux cleaned = 0.296654 Jy ! Total flux subtracted in 200 components = 0.296654 Jy ! Clean residual min=-0.005484 max=0.008147 Jy/beam ! Clean residual mean=-0.000000 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.296654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.296654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=7.475 mas, bpa=-4.351 degrees ! Estimated noise=960.954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133671 Jy ! Component: 100 - total flux cleaned = 0.0218624 Jy ! Component: 150 - total flux cleaned = 0.0280536 Jy ! Component: 200 - total flux cleaned = 0.0327757 Jy ! Total flux subtracted in 200 components = 0.0327757 Jy ! Clean residual min=-0.003327 max=0.003697 Jy/beam ! Clean residual mean=0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.329429 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 70 components and 0.329429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.906 mas, bmaj=13.1 mas, bpa=-5.451 degrees ! Estimated noise=1269.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611395 Jy ! Component: 100 - total flux cleaned = 0.00970003 Jy ! Component: 150 - total flux cleaned = 0.0112339 Jy ! Component: 200 - total flux cleaned = 0.0119404 Jy ! Total flux subtracted in 200 components = 0.0119404 Jy ! Clean residual min=-0.003246 max=0.002977 Jy/beam ! Clean residual mean=-0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.34137 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060851 Jy ! Component: 100 - total flux cleaned = 0.000964775 Jy ! Component: 150 - total flux cleaned = 0.00107797 Jy ! Component: 200 - total flux cleaned = 0.00117865 Jy ! Total flux subtracted in 200 components = 0.00117865 Jy ! Clean residual min=-0.003073 max=0.002914 Jy/beam ! Clean residual mean=-0.000007 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.342548 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 128 components and 0.342548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=7.475 mas, bpa=-4.351 degrees ! Estimated noise=960.954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447792 Jy ! Component: 100 - total flux cleaned = -0.000515443 Jy ! Component: 150 - total flux cleaned = -0.00029195 Jy ! Component: 200 - total flux cleaned = -0.000242414 Jy ! Total flux subtracted in 200 components = -0.000242414 Jy ! Clean residual min=-0.002640 max=0.002657 Jy/beam ! Clean residual mean=-0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.342306 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 0.342306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090260Jy sigma=0.000667 ! Fit after self-cal, rms=0.090223Jy sigma=0.000666 wmodel J0653-0625_S_2017_07_16_pus_map.mod ! Writing 150 model components to file: J0653-0625_S_2017_07_16_pus_map.mod wobs J0653-0625_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0653-0625_S_2017_07_16_pus_uvs.fits wwins J0653-0625_S_2017_07_16_pus_map.win ! wwins: Wrote 4 windows to J0653-0625_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000344932 Jy ! Component: 100 - total flux cleaned = 0.000707889 Jy ! Component: 150 - total flux cleaned = 0.00101095 Jy ! Component: 200 - total flux cleaned = 0.00122073 Jy ! Component: 250 - total flux cleaned = 0.0013426 Jy ! Component: 300 - total flux cleaned = 0.00142207 Jy ! Component: 350 - total flux cleaned = 0.00165362 Jy ! Component: 400 - total flux cleaned = 0.0017289 Jy ! Component: 450 - total flux cleaned = 0.00194996 Jy ! Component: 500 - total flux cleaned = 0.00209445 Jy ! Component: 550 - total flux cleaned = 0.00220063 Jy ! Component: 600 - total flux cleaned = 0.00223576 Jy ! Component: 650 - total flux cleaned = 0.00240658 Jy ! Component: 700 - total flux cleaned = 0.00253997 Jy ! Component: 750 - total flux cleaned = 0.00253958 Jy ! Component: 800 - total flux cleaned = 0.00257231 Jy ! Component: 850 - total flux cleaned = 0.00257218 Jy ! Component: 900 - total flux cleaned = 0.00260438 Jy ! Component: 950 - total flux cleaned = 0.0025739 Jy ! Component: 1000 - total flux cleaned = 0.00263542 Jy ! Component: 1050 - total flux cleaned = 0.00260536 Jy ! Component: 1100 - total flux cleaned = 0.00263542 Jy ! Component: 1150 - total flux cleaned = 0.00278244 Jy ! Component: 1200 - total flux cleaned = 0.00272429 Jy ! Component: 1250 - total flux cleaned = 0.00275274 Jy ! Component: 1300 - total flux cleaned = 0.00272391 Jy ! Component: 1350 - total flux cleaned = 0.00266818 Jy ! Component: 1400 - total flux cleaned = 0.00264066 Jy ! Component: 1450 - total flux cleaned = 0.00258659 Jy ! Component: 1500 - total flux cleaned = 0.00255963 Jy ! Component: 1550 - total flux cleaned = 0.00258661 Jy ! Component: 1600 - total flux cleaned = 0.00258679 Jy ! Component: 1650 - total flux cleaned = 0.00261269 Jy ! Component: 1700 - total flux cleaned = 0.00263833 Jy ! Component: 1750 - total flux cleaned = 0.00263833 Jy ! Component: 1800 - total flux cleaned = 0.00276407 Jy ! Component: 1850 - total flux cleaned = 0.00273927 Jy ! Component: 1900 - total flux cleaned = 0.00271473 Jy ! Component: 1950 - total flux cleaned = 0.00273935 Jy ! Component: 2000 - total flux cleaned = 0.00288371 Jy ! Component: 2050 - total flux cleaned = 0.0028837 Jy ! Component: 2100 - total flux cleaned = 0.00286014 Jy ! Component: 2150 - total flux cleaned = 0.00297692 Jy ! Component: 2200 - total flux cleaned = 0.00302357 Jy ! Component: 2250 - total flux cleaned = 0.00306945 Jy ! Component: 2300 - total flux cleaned = 0.00318308 Jy ! Component: 2350 - total flux cleaned = 0.00316058 Jy ! Component: 2400 - total flux cleaned = 0.00309446 Jy ! Component: 2450 - total flux cleaned = 0.0032491 Jy ! Component: 2500 - total flux cleaned = 0.00322704 Jy ! Component: 2550 - total flux cleaned = 0.00318403 Jy ! Component: 2600 - total flux cleaned = 0.00320547 Jy ! Component: 2650 - total flux cleaned = 0.00316314 Jy ! Component: 2700 - total flux cleaned = 0.0031631 Jy ! Component: 2750 - total flux cleaned = 0.0031003 Jy ! Component: 2800 - total flux cleaned = 0.00307973 Jy ! Component: 2850 - total flux cleaned = 0.00303873 Jy ! Component: 2900 - total flux cleaned = 0.00314108 Jy ! Component: 2950 - total flux cleaned = 0.00306033 Jy ! Component: 3000 - total flux cleaned = 0.00308047 Jy ! Component: 3050 - total flux cleaned = 0.00308061 Jy ! Component: 3100 - total flux cleaned = 0.00313955 Jy ! Component: 3150 - total flux cleaned = 0.00310019 Jy ! Component: 3200 - total flux cleaned = 0.00304204 Jy ! Component: 3250 - total flux cleaned = 0.00308093 Jy ! Component: 3300 - total flux cleaned = 0.00296636 Jy ! Component: 3350 - total flux cleaned = 0.00296643 Jy ! Component: 3400 - total flux cleaned = 0.00302307 Jy ! Component: 3450 - total flux cleaned = 0.00298538 Jy ! Component: 3500 - total flux cleaned = 0.00287414 Jy ! Component: 3550 - total flux cleaned = 0.0028555 Jy ! Component: 3600 - total flux cleaned = 0.00287369 Jy ! Component: 3650 - total flux cleaned = 0.00285558 Jy ! Component: 3700 - total flux cleaned = 0.00269378 Jy ! Component: 3750 - total flux cleaned = 0.00272979 Jy ! Component: 3800 - total flux cleaned = 0.00269438 Jy ! Component: 3850 - total flux cleaned = 0.00278248 Jy ! Component: 3900 - total flux cleaned = 0.00262481 Jy ! Component: 3950 - total flux cleaned = 0.00265976 Jy ! Component: 4000 - total flux cleaned = 0.00250408 Jy ! Component: 4050 - total flux cleaned = 0.00250423 Jy ! Total flux subtracted in 4096 components = 0.00241889 Jy ! Clean residual min=-0.000989 max=0.001007 Jy/beam ! Clean residual mean=-0.000003 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.344725 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 482 components and 0.344724 Jy ![Exited script file: muppet] wmap "J0653-0625_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 7.475 at -4.351 degrees (North through East) ! Clean map min=-0.0018505 max=0.25944 Jy/beam ! Writing clean map to FITS file: J0653-0625_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.259441 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000310458 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.358992 0.358992 0.717984 1.43597 2.87194 5.74387 11.4877 22.9755 45.951 91.902 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.259 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.003 x 7.475 at -4.351 degrees (North through East) ! Clean map min=-0.0018505 max=0.25944 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0653-0625_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:03:27 2019