! Started logfile: J0651-2101_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:18 2019 obs J0651-2101_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0651-2101_S_2017_01_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682143 visibilities/baseline/integration-bin. ! Found source: J0651-2101 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 6876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0651-2101_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.824705Jy sigma=0.005286 ! Fit after self-cal, rms=0.809909Jy sigma=0.005220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=11.63 mas, bpa=15.58 degrees ! Estimated noise=1785.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15647 Jy ! Component: 100 - total flux cleaned = 0.190802 Jy ! Total flux subtracted in 100 components = 0.190802 Jy ! Clean residual min=-0.008361 max=0.010809 Jy/beam ! Clean residual mean=-0.000008 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.190802 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.190802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203770Jy sigma=0.000694 ! Fit after self-cal, rms=0.203790Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=12.8 mas, bpa=14.55 degrees ! Estimated noise=1416.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128384 Jy ! Component: 100 - total flux cleaned = 0.020093 Jy ! Component: 150 - total flux cleaned = 0.0248571 Jy ! Component: 200 - total flux cleaned = 0.028023 Jy ! Total flux subtracted in 200 components = 0.028023 Jy ! Clean residual min=-0.006595 max=0.005478 Jy/beam ! Clean residual mean=-0.000014 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.218825 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 52 components and 0.218825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201813Jy sigma=0.000686 ! Fit after self-cal, rms=0.201845Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.91 HN 1.05 KP 0.99 ! LA 1.02 MK 1.00* NL 0.91 OV 1.02 ! PT 1.10 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 1.00 KP 1.01 ! LA 1.00 MK 1.00* NL 1.08 OV 1.02 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.07 KP 1.02 ! LA 1.03 MK 1.00* NL 0.99 OV 0.96 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.97 HN 0.96 KP 1.05 ! LA 0.54 MK 1.00* NL 1.00* OV 0.88 ! PT 0.97 SC 1.18 ! ! ! Fit before self-cal, rms=0.201845Jy sigma=0.000686 ! Fit after self-cal, rms=0.145214Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=12.87 mas, bpa=14.45 degrees ! Estimated noise=1425.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380257 Jy ! Component: 100 - total flux cleaned = 0.000430215 Jy ! Component: 150 - total flux cleaned = 0.000393604 Jy ! Component: 200 - total flux cleaned = 0.000360055 Jy ! Total flux subtracted in 200 components = 0.000360055 Jy ! Clean residual min=-0.005295 max=0.004537 Jy/beam ! Clean residual mean=-0.000013 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.219185 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.219185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145160Jy sigma=0.000674 ! Fit after self-cal, rms=0.145029Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145029Jy sigma=0.000673 ! Fit after self-cal, rms=0.141180Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=12.86 mas, bpa=14.46 degrees ! Estimated noise=1433.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101631 Jy ! Component: 100 - total flux cleaned = 0.00127738 Jy ! Component: 150 - total flux cleaned = 0.00128005 Jy ! Component: 200 - total flux cleaned = 0.00125034 Jy ! Total flux subtracted in 200 components = 0.00125034 Jy ! Clean residual min=-0.004671 max=0.004257 Jy/beam ! Clean residual mean=-0.000011 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.220435 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.220435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141116Jy sigma=0.000671 ! Fit after self-cal, rms=0.141020Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109415 Jy ! Component: 100 - total flux cleaned = -0.000137772 Jy ! Component: 150 - total flux cleaned = -0.000136823 Jy ! Component: 200 - total flux cleaned = -0.00013677 Jy ! Total flux subtracted in 200 components = -0.00013677 Jy ! Clean residual min=-0.004691 max=0.004242 Jy/beam ! Clean residual mean=-0.000011 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.220299 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.220299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141004Jy sigma=0.000670 ! Fit after self-cal, rms=0.141000Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141000Jy sigma=0.000670 ! Fit after self-cal, rms=0.128755Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=12.87 mas, bpa=14.46 degrees ! Estimated noise=1433.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000443352 Jy ! Component: 100 - total flux cleaned = -0.000520027 Jy ! Component: 150 - total flux cleaned = -0.000564491 Jy ! Component: 200 - total flux cleaned = -0.000605772 Jy ! Total flux subtracted in 200 components = -0.000605772 Jy ! Clean residual min=-0.003831 max=0.003694 Jy/beam ! Clean residual mean=-0.000007 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.219693 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.219693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128745Jy sigma=0.000668 ! Fit after self-cal, rms=0.128588Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136025 Jy ! Component: 100 - total flux cleaned = -0.000154258 Jy ! Component: 150 - total flux cleaned = -0.000170971 Jy ! Component: 200 - total flux cleaned = -0.000186885 Jy ! Total flux subtracted in 200 components = -0.000186885 Jy ! Clean residual min=-0.003889 max=0.003691 Jy/beam ! Clean residual mean=-0.000007 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.219506 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.219506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128583Jy sigma=0.000668 ! Fit after self-cal, rms=0.128581Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128581Jy sigma=0.000668 ! Fit after self-cal, rms=0.128456Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=17.51 mas, bpa=5.573 degrees ! Estimated noise=1717.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000698506 Jy ! Component: 100 - total flux cleaned = -0.000859525 Jy ! Component: 150 - total flux cleaned = -0.00104578 Jy ! Component: 200 - total flux cleaned = -0.00119043 Jy ! Total flux subtracted in 200 components = -0.00119043 Jy ! Clean residual min=-0.003639 max=0.003736 Jy/beam ! Clean residual mean=-0.000009 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.218316 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.218316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128454Jy sigma=0.000668 ! Fit after self-cal, rms=0.128441Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002349 Jy ! Component: 100 - total flux cleaned = -0.000272173 Jy ! Component: 150 - total flux cleaned = -0.000362734 Jy ! Component: 200 - total flux cleaned = -0.000418284 Jy ! Total flux subtracted in 200 components = -0.000418284 Jy ! Clean residual min=-0.003604 max=0.003764 Jy/beam ! Clean residual mean=-0.000008 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.217897 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.217897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128444Jy sigma=0.000668 ! Fit after self-cal, rms=0.128440Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=12.89 mas, bpa=14.48 degrees ! Estimated noise=1434.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.702 x 12.89 at 14.48 degrees (North through East) ! Clean map min=-0.003671 max=0.20307 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=11.72 mas, bpa=15.44 degrees ! Estimated noise=1790.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156828 Jy ! Component: 100 - total flux cleaned = 0.191092 Jy ! Component: 150 - total flux cleaned = 0.201428 Jy ! Component: 200 - total flux cleaned = 0.207527 Jy ! Total flux subtracted in 200 components = 0.207527 Jy ! Clean residual min=-0.005149 max=0.004609 Jy/beam ! Clean residual mean=-0.000003 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.207527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.207527 Jy ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=12.89 mas, bpa=14.48 degrees ! Estimated noise=1434.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549205 Jy ! Component: 100 - total flux cleaned = 0.0086194 Jy ! Component: 150 - total flux cleaned = 0.00954647 Jy ! Component: 200 - total flux cleaned = 0.00987052 Jy ! Total flux subtracted in 200 components = 0.00987052 Jy ! Clean residual min=-0.003705 max=0.003623 Jy/beam ! Clean residual mean=-0.000006 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.217398 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 57 components and 0.217398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=17.51 mas, bpa=5.573 degrees ! Estimated noise=1717.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140878 Jy ! Component: 100 - total flux cleaned = -4.02337e-05 Jy ! Component: 150 - total flux cleaned = -6.46941e-06 Jy ! Component: 200 - total flux cleaned = -2.90573e-05 Jy ! Total flux subtracted in 200 components = -2.90573e-05 Jy ! Clean residual min=-0.003471 max=0.003714 Jy/beam ! Clean residual mean=-0.000008 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.217369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75329e-05 Jy ! Component: 100 - total flux cleaned = -3.59976e-05 Jy ! Component: 150 - total flux cleaned = -6.2856e-05 Jy ! Component: 200 - total flux cleaned = -8.72628e-05 Jy ! Total flux subtracted in 200 components = -8.72628e-05 Jy ! Clean residual min=-0.003463 max=0.003700 Jy/beam ! Clean residual mean=-0.000007 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.217281 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 85 components and 0.217281 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.702 mas, bmaj=12.89 mas, bpa=14.48 degrees ! Estimated noise=1434.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250198 Jy ! Component: 100 - total flux cleaned = 0.000216539 Jy ! Component: 150 - total flux cleaned = 0.000157185 Jy ! Component: 200 - total flux cleaned = 0.000129389 Jy ! Total flux subtracted in 200 components = 0.000129389 Jy ! Clean residual min=-0.003760 max=0.003681 Jy/beam ! Clean residual mean=-0.000005 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.217411 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.217411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128479Jy sigma=0.000668 ! Fit after self-cal, rms=0.128473Jy sigma=0.000668 wmodel J0651-2101_S_2017_01_16_pus_map.mod ! Writing 100 model components to file: J0651-2101_S_2017_01_16_pus_map.mod wobs J0651-2101_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0651-2101_S_2017_01_16_pus_uvs.fits wwins J0651-2101_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0651-2101_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.12463e-05 Jy ! Component: 100 - total flux cleaned = -0.000255278 Jy ! Component: 150 - total flux cleaned = -0.000610408 Jy ! Component: 200 - total flux cleaned = -0.00105882 Jy ! Component: 250 - total flux cleaned = -0.00138051 Jy ! Component: 300 - total flux cleaned = -0.00153819 Jy ! Component: 350 - total flux cleaned = -0.00188684 Jy ! Component: 400 - total flux cleaned = -0.00203086 Jy ! Component: 450 - total flux cleaned = -0.00217149 Jy ! Component: 500 - total flux cleaned = -0.00226163 Jy ! Component: 550 - total flux cleaned = -0.00243791 Jy ! Component: 600 - total flux cleaned = -0.0025664 Jy ! Component: 650 - total flux cleaned = -0.00265118 Jy ! Component: 700 - total flux cleaned = -0.00277486 Jy ! Component: 750 - total flux cleaned = -0.00285532 Jy ! Component: 800 - total flux cleaned = -0.00289447 Jy ! Component: 850 - total flux cleaned = -0.0030879 Jy ! Component: 900 - total flux cleaned = -0.00301132 Jy ! Component: 950 - total flux cleaned = -0.00301132 Jy ! Component: 1000 - total flux cleaned = -0.00308405 Jy ! Component: 1050 - total flux cleaned = -0.00311866 Jy ! Component: 1100 - total flux cleaned = -0.0030476 Jy ! Component: 1150 - total flux cleaned = -0.00301234 Jy ! Component: 1200 - total flux cleaned = -0.00304637 Jy ! Component: 1250 - total flux cleaned = -0.00301311 Jy ! Component: 1300 - total flux cleaned = -0.00317978 Jy ! Component: 1350 - total flux cleaned = -0.0032444 Jy ! Component: 1400 - total flux cleaned = -0.00330875 Jy ! Component: 1450 - total flux cleaned = -0.00330911 Jy ! Component: 1500 - total flux cleaned = -0.00337216 Jy ! Component: 1550 - total flux cleaned = -0.00331063 Jy ! Component: 1600 - total flux cleaned = -0.00340314 Jy ! Component: 1650 - total flux cleaned = -0.00340329 Jy ! Component: 1700 - total flux cleaned = -0.00349239 Jy ! Component: 1750 - total flux cleaned = -0.00340326 Jy ! Component: 1800 - total flux cleaned = -0.00346182 Jy ! Component: 1850 - total flux cleaned = -0.00349019 Jy ! Component: 1900 - total flux cleaned = -0.00340484 Jy ! Component: 1950 - total flux cleaned = -0.00343337 Jy ! Component: 2000 - total flux cleaned = -0.00346085 Jy ! Component: 2050 - total flux cleaned = -0.00351586 Jy ! Component: 2100 - total flux cleaned = -0.00348899 Jy ! Component: 2150 - total flux cleaned = -0.00356948 Jy ! Component: 2200 - total flux cleaned = -0.00370226 Jy ! Component: 2250 - total flux cleaned = -0.0036499 Jy ! Component: 2300 - total flux cleaned = -0.00359815 Jy ! Component: 2350 - total flux cleaned = -0.00367529 Jy ! Component: 2400 - total flux cleaned = -0.00362399 Jy ! Component: 2450 - total flux cleaned = -0.00357358 Jy ! Component: 2500 - total flux cleaned = -0.00359848 Jy ! Component: 2550 - total flux cleaned = -0.00354872 Jy ! Component: 2600 - total flux cleaned = -0.00347502 Jy ! Component: 2650 - total flux cleaned = -0.00349978 Jy ! Component: 2700 - total flux cleaned = -0.0034515 Jy ! Component: 2750 - total flux cleaned = -0.00330796 Jy ! Component: 2800 - total flux cleaned = -0.00321374 Jy ! Component: 2850 - total flux cleaned = -0.00321373 Jy ! Component: 2900 - total flux cleaned = -0.00316721 Jy ! Component: 2950 - total flux cleaned = -0.00321387 Jy ! Component: 3000 - total flux cleaned = -0.0031676 Jy ! Component: 3050 - total flux cleaned = -0.00312227 Jy ! Component: 3100 - total flux cleaned = -0.00319042 Jy ! Component: 3150 - total flux cleaned = -0.0031904 Jy ! Component: 3200 - total flux cleaned = -0.0032351 Jy ! Component: 3250 - total flux cleaned = -0.00316846 Jy ! Component: 3300 - total flux cleaned = -0.00321237 Jy ! Component: 3350 - total flux cleaned = -0.0032776 Jy ! Component: 3400 - total flux cleaned = -0.00323414 Jy ! Component: 3450 - total flux cleaned = -0.00342815 Jy ! Component: 3500 - total flux cleaned = -0.00342803 Jy ! Component: 3550 - total flux cleaned = -0.0034918 Jy ! Component: 3600 - total flux cleaned = -0.00347061 Jy ! Component: 3650 - total flux cleaned = -0.00353376 Jy ! Component: 3700 - total flux cleaned = -0.00363847 Jy ! Component: 3750 - total flux cleaned = -0.0037836 Jy ! Component: 3800 - total flux cleaned = -0.00384533 Jy ! Component: 3850 - total flux cleaned = -0.00392748 Jy ! Component: 3900 - total flux cleaned = -0.00400893 Jy ! Component: 3950 - total flux cleaned = -0.00406985 Jy ! Component: 4000 - total flux cleaned = -0.0041706 Jy ! Component: 4050 - total flux cleaned = -0.0042507 Jy ! Total flux subtracted in 4096 components = -0.00429031 Jy ! Clean residual min=-0.001346 max=0.001205 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.213121 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 374 components and 0.21312 Jy ![Exited script file: muppet] wmap "J0651-2101_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.702 x 12.89 at 14.48 degrees (North through East) ! Clean map min=-0.0029238 max=0.20405 Jy/beam ! Writing clean map to FITS file: J0651-2101_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.204053 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000366129 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.538285 0.538285 1.07657 2.15314 4.30628 8.61256 17.2251 34.4502 68.9005 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.702 x 12.89 at 14.48 degrees (North through East) ! Clean map min=-0.0029238 max=0.20405 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0651-2101_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:23 2019