! Started logfile: J0650-2849_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:05 2019 obs J0650-2849_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0650-2849_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.761381 visibilities/baseline/integration-bin. ! Found source: J0650-2849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-2849_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 707 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893730Jy sigma=0.006848 ! Fit after self-cal, rms=0.875964Jy sigma=0.006719 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=15.02 mas, bpa=-24.95 degrees ! Estimated noise=1882.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981351 Jy ! Component: 100 - total flux cleaned = 0.120636 Jy ! Total flux subtracted in 100 components = 0.120636 Jy ! Clean residual min=-0.007052 max=0.008491 Jy/beam ! Clean residual mean=-0.000005 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.120636 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.120636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105591Jy sigma=0.000734 ! Fit after self-cal, rms=0.105576Jy sigma=0.000733 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=17.34 mas, bpa=-23.93 degrees ! Estimated noise=833.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012401 Jy ! Component: 100 - total flux cleaned = 0.0186297 Jy ! Component: 150 - total flux cleaned = 0.0223991 Jy ! Component: 200 - total flux cleaned = 0.0248494 Jy ! Total flux subtracted in 200 components = 0.0248494 Jy ! Clean residual min=-0.003407 max=0.004305 Jy/beam ! Clean residual mean=-0.000012 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.145486 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 81 components and 0.145486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104131Jy sigma=0.000722 ! Fit after self-cal, rms=0.104217Jy sigma=0.000722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.03 KP 1.11 ! LA 1.04 MK 0.99 NL 0.90 OV 0.96 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.08 KP 1.06 ! LA 0.96 MK 1.00 NL 1.02 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.09 KP 1.04 ! LA 0.79 MK 1.00 NL 1.15 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.89 KP 1.00* ! LA 0.73 MK 1.16 NL 1.00* OV 1.00* ! PT 0.90 ! ! ! Fit before self-cal, rms=0.104217Jy sigma=0.000722 ! Fit after self-cal, rms=0.101557Jy sigma=0.000715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=17.42 mas, bpa=-24.03 degrees ! Estimated noise=829.983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620996 Jy ! Component: 100 - total flux cleaned = -0.000624189 Jy ! Component: 150 - total flux cleaned = -0.000578556 Jy ! Component: 200 - total flux cleaned = -0.000516513 Jy ! Total flux subtracted in 200 components = -0.000516513 Jy ! Clean residual min=-0.002439 max=0.002246 Jy/beam ! Clean residual mean=0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.144969 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.144969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101542Jy sigma=0.000714 ! Fit after self-cal, rms=0.101590Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101590Jy sigma=0.000714 ! Fit after self-cal, rms=0.101946Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=17.44 mas, bpa=-24.07 degrees ! Estimated noise=829.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700921 Jy ! Component: 100 - total flux cleaned = -0.000701704 Jy ! Component: 150 - total flux cleaned = -0.000662968 Jy ! Component: 200 - total flux cleaned = -0.000610382 Jy ! Total flux subtracted in 200 components = -0.000610382 Jy ! Clean residual min=-0.002485 max=0.002223 Jy/beam ! Clean residual mean=0.000008 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.144359 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.144359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101936Jy sigma=0.000714 ! Fit after self-cal, rms=0.101967Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58419e-06 Jy ! Component: 100 - total flux cleaned = 2.4992e-05 Jy ! Component: 150 - total flux cleaned = 5.48201e-05 Jy ! Component: 200 - total flux cleaned = 9.73285e-05 Jy ! Total flux subtracted in 200 components = 9.73285e-05 Jy ! Clean residual min=-0.002514 max=0.002227 Jy/beam ! Clean residual mean=0.000008 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.144456 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 0.144456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101961Jy sigma=0.000714 ! Fit after self-cal, rms=0.101962Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101962Jy sigma=0.000714 ! Fit after self-cal, rms=0.102384Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=17.48 mas, bpa=-24.06 degrees ! Estimated noise=828.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514207 Jy ! Component: 100 - total flux cleaned = -0.000520318 Jy ! Component: 150 - total flux cleaned = -0.000469583 Jy ! Component: 200 - total flux cleaned = -0.000409074 Jy ! Total flux subtracted in 200 components = -0.000409074 Jy ! Clean residual min=-0.002180 max=0.002177 Jy/beam ! Clean residual mean=-0.000005 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.144047 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 120 components and 0.144047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102374Jy sigma=0.000713 ! Fit after self-cal, rms=0.102395Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.48979e-05 Jy ! Component: 100 - total flux cleaned = 0.000114625 Jy ! Component: 150 - total flux cleaned = 0.00015242 Jy ! Component: 200 - total flux cleaned = 0.000176099 Jy ! Total flux subtracted in 200 components = 0.000176099 Jy ! Clean residual min=-0.002182 max=0.002206 Jy/beam ! Clean residual mean=-0.000004 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.144223 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 0.144223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102391Jy sigma=0.000713 ! Fit after self-cal, rms=0.102392Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102392Jy sigma=0.000713 ! Fit after self-cal, rms=0.102715Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.912 mas, bmaj=33.58 mas, bpa=-13.41 degrees ! Estimated noise=964.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188167 Jy ! Component: 100 - total flux cleaned = -0.00023723 Jy ! Component: 150 - total flux cleaned = -0.000238536 Jy ! Component: 200 - total flux cleaned = -0.000204246 Jy ! Total flux subtracted in 200 components = -0.000204246 Jy ! Clean residual min=-0.002534 max=0.002124 Jy/beam ! Clean residual mean=-0.000008 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.144019 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 136 components and 0.144019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102713Jy sigma=0.000713 ! Fit after self-cal, rms=0.102727Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.57576e-05 Jy ! Component: 100 - total flux cleaned = 9.55132e-05 Jy ! Component: 150 - total flux cleaned = 0.000114211 Jy ! Component: 200 - total flux cleaned = 0.000140538 Jy ! Total flux subtracted in 200 components = 0.000140538 Jy ! Clean residual min=-0.002536 max=0.002141 Jy/beam ! Clean residual mean=-0.000008 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.144159 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 141 components and 0.144159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102728Jy sigma=0.000713 ! Fit after self-cal, rms=0.102730Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=17.51 mas, bpa=-24.08 degrees ! Estimated noise=828.417 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 17.51 at -24.08 degrees (North through East) ! Clean map min=-0.0020946 max=0.12574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=15.09 mas, bpa=-25.05 degrees ! Estimated noise=1881.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.097457 Jy ! Component: 100 - total flux cleaned = 0.119642 Jy ! Component: 150 - total flux cleaned = 0.128424 Jy ! Component: 200 - total flux cleaned = 0.133789 Jy ! Total flux subtracted in 200 components = 0.133789 Jy ! Clean residual min=-0.004374 max=0.004256 Jy/beam ! Clean residual mean=0.000001 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.133789 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.133789 Jy ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=17.51 mas, bpa=-24.08 degrees ! Estimated noise=828.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474502 Jy ! Component: 100 - total flux cleaned = 0.00707385 Jy ! Component: 150 - total flux cleaned = 0.00854397 Jy ! Component: 200 - total flux cleaned = 0.00938201 Jy ! Total flux subtracted in 200 components = 0.00938201 Jy ! Clean residual min=-0.002302 max=0.002356 Jy/beam ! Clean residual mean=-0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.143171 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.143171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.912 mas, bmaj=33.58 mas, bpa=-13.41 degrees ! Estimated noise=964.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599322 Jy ! Component: 100 - total flux cleaned = 0.000769967 Jy ! Component: 150 - total flux cleaned = 0.000891795 Jy ! Component: 200 - total flux cleaned = 0.00101068 Jy ! Total flux subtracted in 200 components = 0.00101068 Jy ! Clean residual min=-0.002429 max=0.002111 Jy/beam ! Clean residual mean=-0.000007 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.144182 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.19669e-05 Jy ! Component: 100 - total flux cleaned = 0.000111734 Jy ! Component: 150 - total flux cleaned = 0.000161451 Jy ! Component: 200 - total flux cleaned = 0.000207734 Jy ! Total flux subtracted in 200 components = 0.000207734 Jy ! Clean residual min=-0.002455 max=0.002140 Jy/beam ! Clean residual mean=-0.000008 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.144389 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.144389 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=17.51 mas, bpa=-24.08 degrees ! Estimated noise=828.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335083 Jy ! Component: 100 - total flux cleaned = -0.00040727 Jy ! Component: 150 - total flux cleaned = -0.000406939 Jy ! Component: 200 - total flux cleaned = -0.000406547 Jy ! Total flux subtracted in 200 components = -0.000406547 Jy ! Clean residual min=-0.002169 max=0.002258 Jy/beam ! Clean residual mean=-0.000005 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.143983 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 0.143983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102756Jy sigma=0.000713 ! Fit after self-cal, rms=0.102732Jy sigma=0.000713 wmodel J0650-2849_S_2017_10_21_pus_map.mod ! Writing 66 model components to file: J0650-2849_S_2017_10_21_pus_map.mod wobs J0650-2849_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0650-2849_S_2017_10_21_pus_uvs.fits wwins J0650-2849_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0650-2849_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149195 Jy ! Component: 100 - total flux cleaned = -0.000292235 Jy ! Component: 150 - total flux cleaned = -0.000425669 Jy ! Component: 200 - total flux cleaned = -0.000584828 Jy ! Component: 250 - total flux cleaned = -0.000825912 Jy ! Component: 300 - total flux cleaned = -0.00097001 Jy ! Component: 350 - total flux cleaned = -0.00105323 Jy ! Component: 400 - total flux cleaned = -0.00107986 Jy ! Component: 450 - total flux cleaned = -0.00107901 Jy ! Component: 500 - total flux cleaned = -0.00110461 Jy ! Component: 550 - total flux cleaned = -0.00110502 Jy ! Component: 600 - total flux cleaned = -0.00112922 Jy ! Component: 650 - total flux cleaned = -0.00115269 Jy ! Component: 700 - total flux cleaned = -0.0011292 Jy ! Component: 750 - total flux cleaned = -0.00106146 Jy ! Component: 800 - total flux cleaned = -0.0010399 Jy ! Component: 850 - total flux cleaned = -0.00106186 Jy ! Component: 900 - total flux cleaned = -0.00101928 Jy ! Component: 950 - total flux cleaned = -0.000915319 Jy ! Component: 1000 - total flux cleaned = -0.00087425 Jy ! Component: 1050 - total flux cleaned = -0.000773851 Jy ! Component: 1100 - total flux cleaned = -0.000734435 Jy ! Component: 1150 - total flux cleaned = -0.000695707 Jy ! Component: 1200 - total flux cleaned = -0.000657516 Jy ! Component: 1250 - total flux cleaned = -0.000619492 Jy ! Component: 1300 - total flux cleaned = -0.000508973 Jy ! Component: 1350 - total flux cleaned = -0.000472823 Jy ! Component: 1400 - total flux cleaned = -0.000419634 Jy ! Component: 1450 - total flux cleaned = -0.000367077 Jy ! Component: 1500 - total flux cleaned = -0.000315567 Jy ! Component: 1550 - total flux cleaned = -0.000281627 Jy ! Component: 1600 - total flux cleaned = -0.000298285 Jy ! Component: 1650 - total flux cleaned = -0.000265138 Jy ! Component: 1700 - total flux cleaned = -0.000281424 Jy ! Component: 1750 - total flux cleaned = -0.000313213 Jy ! Component: 1800 - total flux cleaned = -0.00023417 Jy ! Component: 1850 - total flux cleaned = -0.000265641 Jy ! Component: 1900 - total flux cleaned = -0.000219369 Jy ! Component: 1950 - total flux cleaned = -0.000173975 Jy ! Component: 2000 - total flux cleaned = -0.000158956 Jy ! Component: 2050 - total flux cleaned = -0.000114471 Jy ! Component: 2100 - total flux cleaned = -0.000114534 Jy ! Component: 2150 - total flux cleaned = -0.000129098 Jy ! Component: 2200 - total flux cleaned = -8.5861e-05 Jy ! Component: 2250 - total flux cleaned = -2.87693e-05 Jy ! Component: 2300 - total flux cleaned = 1.33387e-05 Jy ! Component: 2350 - total flux cleaned = 2.71777e-05 Jy ! Component: 2400 - total flux cleaned = 5.47512e-05 Jy ! Component: 2450 - total flux cleaned = 9.58674e-05 Jy ! Component: 2500 - total flux cleaned = 0.00012309 Jy ! Component: 2550 - total flux cleaned = 0.000123108 Jy ! Component: 2600 - total flux cleaned = 0.000202789 Jy ! Component: 2650 - total flux cleaned = 0.000202799 Jy ! Component: 2700 - total flux cleaned = 0.000216009 Jy ! Component: 2750 - total flux cleaned = 0.000293437 Jy ! Component: 2800 - total flux cleaned = 0.000331679 Jy ! Component: 2850 - total flux cleaned = 0.000344255 Jy ! Component: 2900 - total flux cleaned = 0.000407111 Jy ! Component: 2950 - total flux cleaned = 0.000506674 Jy ! Component: 3000 - total flux cleaned = 0.00051885 Jy ! Component: 3050 - total flux cleaned = 0.000568001 Jy ! Component: 3100 - total flux cleaned = 0.000616642 Jy ! Component: 3150 - total flux cleaned = 0.000701145 Jy ! Component: 3200 - total flux cleaned = 0.00074908 Jy ! Component: 3250 - total flux cleaned = 0.000796663 Jy ! Component: 3300 - total flux cleaned = 0.000891077 Jy ! Component: 3350 - total flux cleaned = 0.000914539 Jy ! Component: 3400 - total flux cleaned = 0.00100771 Jy ! Component: 3450 - total flux cleaned = 0.00104243 Jy ! Component: 3500 - total flux cleaned = 0.00109987 Jy ! Component: 3550 - total flux cleaned = 0.00112267 Jy ! Component: 3600 - total flux cleaned = 0.00119079 Jy ! Component: 3650 - total flux cleaned = 0.00126965 Jy ! Component: 3700 - total flux cleaned = 0.00125842 Jy ! Component: 3750 - total flux cleaned = 0.00129184 Jy ! Component: 3800 - total flux cleaned = 0.00133605 Jy ! Component: 3850 - total flux cleaned = 0.00141285 Jy ! Component: 3900 - total flux cleaned = 0.00144557 Jy ! Component: 3950 - total flux cleaned = 0.00151059 Jy ! Component: 4000 - total flux cleaned = 0.00153215 Jy ! Component: 4050 - total flux cleaned = 0.00157511 Jy ! Total flux subtracted in 4096 components = 0.00161784 Jy ! Clean residual min=-0.000631 max=0.000575 Jy/beam ! Clean residual mean=0.000002 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.145601 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 307 components and 0.145601 Jy ![Exited script file: muppet] wmap "J0650-2849_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 17.51 at -24.08 degrees (North through East) ! Clean map min=-0.0014905 max=0.12387 Jy/beam ! Writing clean map to FITS file: J0650-2849_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12387 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.485154 0.485154 0.970308 1.94062 3.88123 7.76247 15.5249 31.0499 62.0997 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 17.51 at -24.08 degrees (North through East) ! Clean map min=-0.0014905 max=0.12387 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-2849_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:53:10 2019