! Started logfile: J0650-2849_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:06 2019 obs J0650-2849_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0650-2849_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696881 visibilities/baseline/integration-bin. ! Found source: J0650-2849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 14300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-2849_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 325 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905881Jy sigma=0.005368 ! Fit after self-cal, rms=0.868264Jy sigma=0.005179 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=12.49 mas, bpa=15.01 degrees ! Estimated noise=1610.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115094 Jy ! Component: 100 - total flux cleaned = 0.140501 Jy ! Total flux subtracted in 100 components = 0.140501 Jy ! Clean residual min=-0.005317 max=0.008386 Jy/beam ! Clean residual mean=0.000004 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.140501 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.140501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224311Jy sigma=0.000672 ! Fit after self-cal, rms=0.224300Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=14.6 mas, bpa=13.73 degrees ! Estimated noise=1062.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011252 Jy ! Component: 100 - total flux cleaned = 0.0171084 Jy ! Component: 150 - total flux cleaned = 0.0207633 Jy ! Component: 200 - total flux cleaned = 0.0228577 Jy ! Total flux subtracted in 200 components = 0.0228577 Jy ! Clean residual min=-0.003379 max=0.003986 Jy/beam ! Clean residual mean=0.000020 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.163359 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.163359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222884Jy sigma=0.000667 ! Fit after self-cal, rms=0.222948Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.00 KP 1.00 ! LA 1.00 MK 1.00* NL 0.96 OV 0.99 ! PT 1.09 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.12 KP 1.00 ! LA 0.99 MK 1.00* NL 1.05 OV 1.02 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 1.05 KP 1.02 ! LA 1.01 MK 1.00* NL 1.02 OV 0.93 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 0.58 ! LA 0.86 MK 1.00* NL 1.00* OV 0.92 ! PT 1.10 SC 1.10 ! ! ! Fit before self-cal, rms=0.222948Jy sigma=0.000666 ! Fit after self-cal, rms=0.163436Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=14.7 mas, bpa=13.86 degrees ! Estimated noise=1067.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017281 Jy ! Component: 100 - total flux cleaned = 0.00189729 Jy ! Component: 150 - total flux cleaned = 0.00194176 Jy ! Component: 200 - total flux cleaned = 0.00194264 Jy ! Total flux subtracted in 200 components = 0.00194264 Jy ! Clean residual min=-0.003065 max=0.002609 Jy/beam ! Clean residual mean=0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.165301 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.165301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163352Jy sigma=0.000662 ! Fit after self-cal, rms=0.163238Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163238Jy sigma=0.000662 ! Fit after self-cal, rms=0.166550Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=14.68 mas, bpa=13.87 degrees ! Estimated noise=1077.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175203 Jy ! Component: 100 - total flux cleaned = 0.00247283 Jy ! Component: 150 - total flux cleaned = 0.00266317 Jy ! Component: 200 - total flux cleaned = 0.00272011 Jy ! Total flux subtracted in 200 components = 0.00272011 Jy ! Clean residual min=-0.002573 max=0.002447 Jy/beam ! Clean residual mean=0.000010 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.168021 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.168021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166463Jy sigma=0.000661 ! Fit after self-cal, rms=0.166509Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308191 Jy ! Component: 100 - total flux cleaned = 0.000282471 Jy ! Component: 150 - total flux cleaned = 0.000282948 Jy ! Component: 200 - total flux cleaned = 0.000282465 Jy ! Total flux subtracted in 200 components = 0.000282465 Jy ! Clean residual min=-0.002553 max=0.002438 Jy/beam ! Clean residual mean=0.000009 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.168304 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.168304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166492Jy sigma=0.000661 ! Fit after self-cal, rms=0.166490Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166490Jy sigma=0.000661 ! Fit after self-cal, rms=0.163101Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=14.69 mas, bpa=13.9 degrees ! Estimated noise=1085.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012452 Jy ! Component: 100 - total flux cleaned = 0.00159422 Jy ! Component: 150 - total flux cleaned = 0.00184283 Jy ! Component: 200 - total flux cleaned = 0.00199314 Jy ! Total flux subtracted in 200 components = 0.00199314 Jy ! Clean residual min=-0.002346 max=0.002378 Jy/beam ! Clean residual mean=0.000014 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.170297 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.170297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163043Jy sigma=0.000661 ! Fit after self-cal, rms=0.162949Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224287 Jy ! Component: 100 - total flux cleaned = 0.000284871 Jy ! Component: 150 - total flux cleaned = 0.000303293 Jy ! Component: 200 - total flux cleaned = 0.000320894 Jy ! Total flux subtracted in 200 components = 0.000320894 Jy ! Clean residual min=-0.002351 max=0.002325 Jy/beam ! Clean residual mean=0.000014 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.170618 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.170618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162936Jy sigma=0.000661 ! Fit after self-cal, rms=0.162932Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162932Jy sigma=0.000661 ! Fit after self-cal, rms=0.164346Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=21.41 mas, bpa=5.598 degrees ! Estimated noise=1288.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154502 Jy ! Component: 100 - total flux cleaned = 0.00198571 Jy ! Component: 150 - total flux cleaned = 0.00217678 Jy ! Component: 200 - total flux cleaned = 0.00217614 Jy ! Total flux subtracted in 200 components = 0.00217614 Jy ! Clean residual min=-0.002406 max=0.002317 Jy/beam ! Clean residual mean=0.000027 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.172794 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 0.172794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164289Jy sigma=0.000661 ! Fit after self-cal, rms=0.164286Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.56189e-05 Jy ! Component: 100 - total flux cleaned = 4.57828e-05 Jy ! Component: 150 - total flux cleaned = 5.98327e-05 Jy ! Component: 200 - total flux cleaned = 5.94862e-05 Jy ! Total flux subtracted in 200 components = 5.94862e-05 Jy ! Clean residual min=-0.002473 max=0.002282 Jy/beam ! Clean residual mean=0.000027 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.172853 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.172853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164278Jy sigma=0.000661 ! Fit after self-cal, rms=0.164275Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=14.69 mas, bpa=13.94 degrees ! Estimated noise=1093.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 14.69 at 13.94 degrees (North through East) ! Clean map min=-0.002338 max=0.14731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=12.55 mas, bpa=15.17 degrees ! Estimated noise=1646.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117496 Jy ! Component: 100 - total flux cleaned = 0.143606 Jy ! Component: 150 - total flux cleaned = 0.15223 Jy ! Component: 200 - total flux cleaned = 0.157553 Jy ! Total flux subtracted in 200 components = 0.157553 Jy ! Clean residual min=-0.004539 max=0.004738 Jy/beam ! Clean residual mean=-0.000001 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.157553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.157553 Jy ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=14.69 mas, bpa=13.94 degrees ! Estimated noise=1093.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573408 Jy ! Component: 100 - total flux cleaned = 0.00893251 Jy ! Component: 150 - total flux cleaned = 0.0110687 Jy ! Component: 200 - total flux cleaned = 0.0125903 Jy ! Total flux subtracted in 200 components = 0.0125903 Jy ! Clean residual min=-0.002475 max=0.002497 Jy/beam ! Clean residual mean=0.000012 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.170144 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.170144 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=21.41 mas, bpa=5.598 degrees ! Estimated noise=1288.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160656 Jy ! Component: 100 - total flux cleaned = 0.00225262 Jy ! Component: 150 - total flux cleaned = 0.00222558 Jy ! Component: 200 - total flux cleaned = 0.00227692 Jy ! Total flux subtracted in 200 components = 0.00227692 Jy ! Clean residual min=-0.002316 max=0.002532 Jy/beam ! Clean residual mean=0.000026 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.172421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4201e-05 Jy ! Component: 100 - total flux cleaned = 6.88163e-05 Jy ! Component: 150 - total flux cleaned = 6.89347e-05 Jy ! Component: 200 - total flux cleaned = 6.95847e-05 Jy ! Total flux subtracted in 200 components = 6.95847e-05 Jy ! Clean residual min=-0.002384 max=0.002477 Jy/beam ! Clean residual mean=0.000027 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.17249 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 107 components and 0.17249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=14.69 mas, bpa=13.94 degrees ! Estimated noise=1093.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218378 Jy ! Component: 100 - total flux cleaned = -0.00029078 Jy ! Component: 150 - total flux cleaned = -0.00032266 Jy ! Component: 200 - total flux cleaned = -0.000348899 Jy ! Total flux subtracted in 200 components = -0.000348899 Jy ! Clean residual min=-0.002417 max=0.002441 Jy/beam ! Clean residual mean=0.000016 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.172141 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.172141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164304Jy sigma=0.000661 ! Fit after self-cal, rms=0.164293Jy sigma=0.000661 wmodel J0650-2849_S_2017_01_16_pus_map.mod ! Writing 123 model components to file: J0650-2849_S_2017_01_16_pus_map.mod wobs J0650-2849_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0650-2849_S_2017_01_16_pus_uvs.fits wwins J0650-2849_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0650-2849_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178038 Jy ! Component: 100 - total flux cleaned = 0.000524873 Jy ! Component: 150 - total flux cleaned = 0.000649137 Jy ! Component: 200 - total flux cleaned = 0.000768464 Jy ! Component: 250 - total flux cleaned = 0.000922048 Jy ! Component: 300 - total flux cleaned = 0.00114419 Jy ! Component: 350 - total flux cleaned = 0.00135936 Jy ! Component: 400 - total flux cleaned = 0.00160175 Jy ! Component: 450 - total flux cleaned = 0.00177026 Jy ! Component: 500 - total flux cleaned = 0.00183617 Jy ! Component: 550 - total flux cleaned = 0.00196483 Jy ! Component: 600 - total flux cleaned = 0.00196477 Jy ! Component: 650 - total flux cleaned = 0.00199563 Jy ! Component: 700 - total flux cleaned = 0.00214674 Jy ! Component: 750 - total flux cleaned = 0.00208702 Jy ! Component: 800 - total flux cleaned = 0.00208746 Jy ! Component: 850 - total flux cleaned = 0.00211636 Jy ! Component: 900 - total flux cleaned = 0.00208801 Jy ! Component: 950 - total flux cleaned = 0.00206023 Jy ! Component: 1000 - total flux cleaned = 0.00208751 Jy ! Component: 1050 - total flux cleaned = 0.00203316 Jy ! Component: 1100 - total flux cleaned = 0.00198021 Jy ! Component: 1150 - total flux cleaned = 0.00203257 Jy ! Component: 1200 - total flux cleaned = 0.00198109 Jy ! Component: 1250 - total flux cleaned = 0.00190444 Jy ! Component: 1300 - total flux cleaned = 0.0019043 Jy ! Component: 1350 - total flux cleaned = 0.00182958 Jy ! Component: 1400 - total flux cleaned = 0.00182982 Jy ! Component: 1450 - total flux cleaned = 0.00182958 Jy ! Component: 1500 - total flux cleaned = 0.00170906 Jy ! Component: 1550 - total flux cleaned = 0.00180345 Jy ! Component: 1600 - total flux cleaned = 0.00163947 Jy ! Component: 1650 - total flux cleaned = 0.00170909 Jy ! Component: 1700 - total flux cleaned = 0.00173174 Jy ! Component: 1750 - total flux cleaned = 0.00173141 Jy ! Component: 1800 - total flux cleaned = 0.00175392 Jy ! Component: 1850 - total flux cleaned = 0.00177586 Jy ! Component: 1900 - total flux cleaned = 0.00175398 Jy ! Component: 1950 - total flux cleaned = 0.00179771 Jy ! Component: 2000 - total flux cleaned = 0.00190535 Jy ! Component: 2050 - total flux cleaned = 0.00196981 Jy ! Component: 2100 - total flux cleaned = 0.00207513 Jy ! Component: 2150 - total flux cleaned = 0.00213771 Jy ! Component: 2200 - total flux cleaned = 0.00220012 Jy ! Component: 2250 - total flux cleaned = 0.00224124 Jy ! Component: 2300 - total flux cleaned = 0.00236334 Jy ! Component: 2350 - total flux cleaned = 0.00240344 Jy ! Component: 2400 - total flux cleaned = 0.00250315 Jy ! Component: 2450 - total flux cleaned = 0.00260188 Jy ! Component: 2500 - total flux cleaned = 0.0026215 Jy ! Component: 2550 - total flux cleaned = 0.00271884 Jy ! Component: 2600 - total flux cleaned = 0.00283457 Jy ! Component: 2650 - total flux cleaned = 0.0029114 Jy ! Component: 2700 - total flux cleaned = 0.0030065 Jy ! Component: 2750 - total flux cleaned = 0.00310073 Jy ! Component: 2800 - total flux cleaned = 0.00310078 Jy ! Component: 2850 - total flux cleaned = 0.00311934 Jy ! Component: 2900 - total flux cleaned = 0.0031564 Jy ! Component: 2950 - total flux cleaned = 0.00326629 Jy ! Component: 3000 - total flux cleaned = 0.00332086 Jy ! Component: 3050 - total flux cleaned = 0.00332099 Jy ! Component: 3100 - total flux cleaned = 0.00344675 Jy ! Component: 3150 - total flux cleaned = 0.00342874 Jy ! Component: 3200 - total flux cleaned = 0.00348199 Jy ! Component: 3250 - total flux cleaned = 0.00353468 Jy ! Component: 3300 - total flux cleaned = 0.00360472 Jy ! Component: 3350 - total flux cleaned = 0.0036223 Jy ! Component: 3400 - total flux cleaned = 0.00369146 Jy ! Component: 3450 - total flux cleaned = 0.00374321 Jy ! Component: 3500 - total flux cleaned = 0.00379437 Jy ! Component: 3550 - total flux cleaned = 0.00387931 Jy ! Component: 3600 - total flux cleaned = 0.00392996 Jy ! Component: 3650 - total flux cleaned = 0.00398032 Jy ! Component: 3700 - total flux cleaned = 0.00409692 Jy ! Component: 3750 - total flux cleaned = 0.00406391 Jy ! Component: 3800 - total flux cleaned = 0.00417922 Jy ! Component: 3850 - total flux cleaned = 0.00421228 Jy ! Component: 3900 - total flux cleaned = 0.00439134 Jy ! Component: 3950 - total flux cleaned = 0.0044238 Jy ! Component: 4000 - total flux cleaned = 0.00447212 Jy ! Component: 4050 - total flux cleaned = 0.00456815 Jy ! Total flux subtracted in 4096 components = 0.00461581 Jy ! Clean residual min=-0.000818 max=0.001257 Jy/beam ! Clean residual mean=0.000004 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.176757 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 412 components and 0.176757 Jy ![Exited script file: muppet] wmap "J0650-2849_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 14.69 at 13.94 degrees (North through East) ! Clean map min=-0.0022315 max=0.14824 Jy/beam ! Writing clean map to FITS file: J0650-2849_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148245 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307193 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.621661 0.621661 1.24332 2.48664 4.97329 9.94658 19.8932 39.7863 79.5726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 14.69 at 13.94 degrees (North through East) ! Clean map min=-0.0022315 max=0.14824 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-2849_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:12 2019