! Started logfile: J0650-1637_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:00 2019 obs J0650-1637_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_10_21_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.803419 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 3008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.585810Jy sigma=0.004856 ! Fit after self-cal, rms=0.546960Jy sigma=0.004510 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=20.8 mas, bpa=-14.08 degrees ! Estimated noise=2227.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03485 Jy ! Component: 100 - total flux cleaned = 1.28649 Jy ! Total flux subtracted in 100 components = 1.28649 Jy ! Clean residual min=-0.063241 max=0.106108 Jy/beam ! Clean residual mean=-0.000963 rms=0.019875 Jy/beam ! Combined flux in latest and established models = 1.28649 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.28649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372134Jy sigma=0.002914 ! Fit after self-cal, rms=0.372133Jy sigma=0.002913 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=22.93 mas, bpa=-14 degrees ! Estimated noise=1870.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174877 Jy ! Component: 100 - total flux cleaned = 0.267595 Jy ! Component: 150 - total flux cleaned = 0.324718 Jy ! Component: 200 - total flux cleaned = 0.361825 Jy ! Total flux subtracted in 200 components = 0.361825 Jy ! Clean residual min=-0.049288 max=0.052553 Jy/beam ! Clean residual mean=-0.000295 rms=0.012759 Jy/beam ! Combined flux in latest and established models = 1.64832 Jy ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 110 components and 1.64832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279263Jy sigma=0.002043 ! Fit after self-cal, rms=0.278299Jy sigma=0.002038 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.03 KP 1.08 ! LA 0.99 MK 0.98 NL 0.92 OV 0.97 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00 KP 1.03 ! LA 0.97 MK 1.00 NL 1.07 OV 1.00 ! PT 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.99 HN 0.98 KP 1.04 ! LA 0.74 MK 1.02 NL 1.25 OV 0.92 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.00* ! LA 1.21 MK 1.09 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.278299Jy sigma=0.002038 ! Fit after self-cal, rms=0.195652Jy sigma=0.001416 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=23.54 mas, bpa=-13.99 degrees ! Estimated noise=1870.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476308 Jy ! Component: 100 - total flux cleaned = 0.0673158 Jy ! Component: 150 - total flux cleaned = 0.0666401 Jy ! Component: 200 - total flux cleaned = 0.0666073 Jy ! Total flux subtracted in 200 components = 0.0666073 Jy ! Clean residual min=-0.019245 max=0.024747 Jy/beam ! Clean residual mean=-0.000014 rms=0.006084 Jy/beam ! Combined flux in latest and established models = 1.71492 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 144 components and 1.71492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182001Jy sigma=0.001282 ! Fit after self-cal, rms=0.180635Jy sigma=0.001272 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180635Jy sigma=0.001272 ! Fit after self-cal, rms=0.141558Jy sigma=0.001092 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=23.83 mas, bpa=-13.99 degrees ! Estimated noise=1863.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166864 Jy ! Component: 100 - total flux cleaned = 0.0206817 Jy ! Component: 150 - total flux cleaned = 0.0207175 Jy ! Component: 200 - total flux cleaned = 0.0207495 Jy ! Total flux subtracted in 200 components = 0.0207495 Jy ! Clean residual min=-0.010872 max=0.011796 Jy/beam ! Clean residual mean=0.000020 rms=0.003343 Jy/beam ! Combined flux in latest and established models = 1.73567 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 202 components and 1.73567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138031Jy sigma=0.001065 ! Fit after self-cal, rms=0.137649Jy sigma=0.001062 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374374 Jy ! Component: 100 - total flux cleaned = 0.00429876 Jy ! Component: 150 - total flux cleaned = 0.00526554 Jy ! Component: 200 - total flux cleaned = 0.00590956 Jy ! Total flux subtracted in 200 components = 0.00590956 Jy ! Clean residual min=-0.010438 max=0.011106 Jy/beam ! Clean residual mean=0.000014 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 1.74158 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 237 components and 1.74158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136425Jy sigma=0.001054 ! Fit after self-cal, rms=0.136257Jy sigma=0.001053 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136257Jy sigma=0.001053 ! Fit after self-cal, rms=0.136281Jy sigma=0.001050 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=23.87 mas, bpa=-14 degrees ! Estimated noise=1862.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185335 Jy ! Component: 100 - total flux cleaned = 0.00327591 Jy ! Component: 150 - total flux cleaned = 0.00367108 Jy ! Component: 200 - total flux cleaned = 0.00399189 Jy ! Total flux subtracted in 200 components = 0.00399189 Jy ! Clean residual min=-0.009000 max=0.009862 Jy/beam ! Clean residual mean=-0.000001 rms=0.002656 Jy/beam ! Combined flux in latest and established models = 1.74557 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 261 components and 1.74557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135455Jy sigma=0.001045 ! Fit after self-cal, rms=0.135366Jy sigma=0.001044 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254132 Jy ! Component: 100 - total flux cleaned = 0.00300636 Jy ! Component: 150 - total flux cleaned = 0.00302238 Jy ! Component: 200 - total flux cleaned = 0.00266132 Jy ! Total flux subtracted in 200 components = 0.00266132 Jy ! Clean residual min=-0.008534 max=0.009554 Jy/beam ! Clean residual mean=-0.000002 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 1.74824 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 283 components and 1.74823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134973Jy sigma=0.001042 ! Fit after self-cal, rms=0.134935Jy sigma=0.001042 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134935Jy sigma=0.001042 ! Fit after self-cal, rms=0.135068Jy sigma=0.001041 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.509 mas, bmaj=25.44 mas, bpa=-8.975 degrees ! Estimated noise=2137.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000835669 Jy ! Component: 100 - total flux cleaned = -0.0018215 Jy ! Component: 150 - total flux cleaned = -0.00248202 Jy ! Component: 200 - total flux cleaned = -0.00304761 Jy ! Total flux subtracted in 200 components = -0.00304761 Jy ! Clean residual min=-0.009998 max=0.012046 Jy/beam ! Clean residual mean=-0.000008 rms=0.003288 Jy/beam ! Combined flux in latest and established models = 1.74519 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 300 components and 1.74519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134793Jy sigma=0.001039 ! Fit after self-cal, rms=0.134759Jy sigma=0.001039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000871022 Jy ! Component: 100 - total flux cleaned = 0.000557502 Jy ! Component: 150 - total flux cleaned = 0.000156883 Jy ! Component: 200 - total flux cleaned = -0.000223981 Jy ! Total flux subtracted in 200 components = -0.000223981 Jy ! Clean residual min=-0.009887 max=0.011754 Jy/beam ! Clean residual mean=-0.000003 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 1.74496 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 324 components and 1.74496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134613Jy sigma=0.001038 ! Fit after self-cal, rms=0.134594Jy sigma=0.001038 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=23.89 mas, bpa=-14 degrees ! Estimated noise=1862.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.761 x 23.89 at -14 degrees (North through East) ! Clean map min=-0.0080994 max=1.3674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134594Jy sigma=0.001038 ! Fit after self-cal, rms=0.134024Jy sigma=0.000789 ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=23.91 mas, bpa=-14.01 degrees ! Estimated noise=1862.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135299 Jy ! Component: 100 - total flux cleaned = -0.00170352 Jy ! Component: 150 - total flux cleaned = -0.00222878 Jy ! Component: 200 - total flux cleaned = -0.0026066 Jy ! Total flux subtracted in 200 components = -0.0026066 Jy ! Clean residual min=-0.007717 max=0.007607 Jy/beam ! Clean residual mean=-0.000003 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 1.74236 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 357 components and 1.74236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133809Jy sigma=0.000787 ! Fit after self-cal, rms=0.133796Jy sigma=0.000787 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626141 Jy ! Component: 100 - total flux cleaned = 0.000445288 Jy ! Component: 150 - total flux cleaned = 2.52186e-05 Jy ! Component: 200 - total flux cleaned = -0.000215212 Jy ! Total flux subtracted in 200 components = -0.000215212 Jy ! Clean residual min=-0.007551 max=0.007504 Jy/beam ! Clean residual mean=-0.000001 rms=0.002161 Jy/beam ! Combined flux in latest and established models = 1.74214 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 380 components and 1.74214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133659Jy sigma=0.000786 ! Fit after self-cal, rms=0.133650Jy sigma=0.000786 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133650Jy sigma=0.000786 ! Fit after self-cal, rms=0.133681Jy sigma=0.000785 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=22.3 mas, bpa=-14.13 degrees ! Estimated noise=2263.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0512 Jy ! Component: 100 - total flux cleaned = 1.30439 Jy ! Component: 150 - total flux cleaned = 1.41644 Jy ! Component: 200 - total flux cleaned = 1.48473 Jy ! Total flux subtracted in 200 components = 1.48473 Jy ! Clean residual min=-0.020060 max=0.037272 Jy/beam ! Clean residual mean=-0.000317 rms=0.007506 Jy/beam ! Combined flux in latest and established models = 1.48473 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.48473 Jy ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=23.92 mas, bpa=-14 degrees ! Estimated noise=1862.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0699299 Jy ! Component: 100 - total flux cleaned = 0.115106 Jy ! Component: 150 - total flux cleaned = 0.146795 Jy ! Component: 200 - total flux cleaned = 0.170343 Jy ! Total flux subtracted in 200 components = 0.170343 Jy ! Clean residual min=-0.013762 max=0.013734 Jy/beam ! Clean residual mean=-0.000148 rms=0.004487 Jy/beam ! Combined flux in latest and established models = 1.65507 Jy ! Adding 129 model components to the UV plane model. ! The established model now contains 153 components and 1.65507 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.515 mas, bmaj=25.47 mas, bpa=-8.954 degrees ! Estimated noise=2136.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261049 Jy ! Component: 100 - total flux cleaned = 0.0436785 Jy ! Component: 150 - total flux cleaned = 0.0560104 Jy ! Component: 200 - total flux cleaned = 0.0633151 Jy ! Total flux subtracted in 200 components = 0.0633151 Jy ! Clean residual min=-0.012629 max=0.010906 Jy/beam ! Clean residual mean=-0.000066 rms=0.003552 Jy/beam ! Combined flux in latest and established models = 1.71839 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263101 Jy ! Component: 100 - total flux cleaned = 0.00408329 Jy ! Component: 150 - total flux cleaned = 0.00531067 Jy ! Component: 200 - total flux cleaned = 0.00584948 Jy ! Total flux subtracted in 200 components = 0.00584948 Jy ! Clean residual min=-0.010847 max=0.010589 Jy/beam ! Clean residual mean=-0.000037 rms=0.003137 Jy/beam ! Combined flux in latest and established models = 1.72424 Jy ! Adding 219 model components to the UV plane model. ! The established model now contains 360 components and 1.72424 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=23.92 mas, bpa=-14 degrees ! Estimated noise=1862.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206598 Jy ! Component: 100 - total flux cleaned = 0.00260887 Jy ! Component: 150 - total flux cleaned = 0.00277703 Jy ! Component: 200 - total flux cleaned = 0.00292643 Jy ! Total flux subtracted in 200 components = 0.00292643 Jy ! Clean residual min=-0.008807 max=0.007423 Jy/beam ! Clean residual mean=-0.000021 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 1.72716 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 391 components and 1.72716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134394Jy sigma=0.000791 ! Fit after self-cal, rms=0.134248Jy sigma=0.000790 wmodel J0650-1637_S_2017_10_21_pus_map.mod ! Writing 391 model components to file: J0650-1637_S_2017_10_21_pus_map.mod wobs J0650-1637_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_10_21_pus_uvs.fits wwins J0650-1637_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0650-1637_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309091 Jy ! Component: 100 - total flux cleaned = -0.00362101 Jy ! Component: 150 - total flux cleaned = -0.00337938 Jy ! Component: 200 - total flux cleaned = -0.00315223 Jy ! Component: 250 - total flux cleaned = -0.0031525 Jy ! Component: 300 - total flux cleaned = -0.0033647 Jy ! Component: 350 - total flux cleaned = -0.00387184 Jy ! Component: 400 - total flux cleaned = -0.00416545 Jy ! Component: 450 - total flux cleaned = -0.00435797 Jy ! Component: 500 - total flux cleaned = -0.00454398 Jy ! Component: 550 - total flux cleaned = -0.00463551 Jy ! Component: 600 - total flux cleaned = -0.0047234 Jy ! Component: 650 - total flux cleaned = -0.00447302 Jy ! Component: 700 - total flux cleaned = -0.0044749 Jy ! Component: 750 - total flux cleaned = -0.00447506 Jy ! Component: 800 - total flux cleaned = -0.00431943 Jy ! Component: 850 - total flux cleaned = -0.00401982 Jy ! Component: 900 - total flux cleaned = -0.00387507 Jy ! Component: 950 - total flux cleaned = -0.00373382 Jy ! Component: 1000 - total flux cleaned = -0.00359447 Jy ! Component: 1050 - total flux cleaned = -0.00339007 Jy ! Component: 1100 - total flux cleaned = -0.00318989 Jy ! Component: 1150 - total flux cleaned = -0.00299551 Jy ! Component: 1200 - total flux cleaned = -0.00286929 Jy ! Component: 1250 - total flux cleaned = -0.00280863 Jy ! Component: 1300 - total flux cleaned = -0.00262467 Jy ! Component: 1350 - total flux cleaned = -0.00244393 Jy ! Component: 1400 - total flux cleaned = -0.00220669 Jy ! Component: 1450 - total flux cleaned = -0.0020904 Jy ! Component: 1500 - total flux cleaned = -0.00191864 Jy ! Component: 1550 - total flux cleaned = -0.00180675 Jy ! Component: 1600 - total flux cleaned = -0.00175199 Jy ! Component: 1650 - total flux cleaned = -0.00191426 Jy ! Component: 1700 - total flux cleaned = -0.00191403 Jy ! Component: 1750 - total flux cleaned = -0.00207186 Jy ! Component: 1800 - total flux cleaned = -0.00217479 Jy ! Component: 1850 - total flux cleaned = -0.00222547 Jy ! Component: 1900 - total flux cleaned = -0.00227547 Jy ! Component: 1950 - total flux cleaned = -0.00242452 Jy ! Component: 2000 - total flux cleaned = -0.00252258 Jy ! Component: 2050 - total flux cleaned = -0.00266754 Jy ! Component: 2100 - total flux cleaned = -0.00271599 Jy ! Component: 2150 - total flux cleaned = -0.00281057 Jy ! Component: 2200 - total flux cleaned = -0.0029966 Jy ! Component: 2250 - total flux cleaned = -0.00313489 Jy ! Component: 2300 - total flux cleaned = -0.00317988 Jy ! Component: 2350 - total flux cleaned = -0.0033149 Jy ! Component: 2400 - total flux cleaned = -0.00331535 Jy ! Component: 2450 - total flux cleaned = -0.0034038 Jy ! Component: 2500 - total flux cleaned = -0.00331741 Jy ! Component: 2550 - total flux cleaned = -0.00349055 Jy ! Component: 2600 - total flux cleaned = -0.00349063 Jy ! Component: 2650 - total flux cleaned = -0.00361761 Jy ! Component: 2700 - total flux cleaned = -0.00357559 Jy ! Component: 2750 - total flux cleaned = -0.00370023 Jy ! Component: 2800 - total flux cleaned = -0.00357645 Jy ! Component: 2850 - total flux cleaned = -0.00365823 Jy ! Component: 2900 - total flux cleaned = -0.00365816 Jy ! Component: 2950 - total flux cleaned = -0.00361802 Jy ! Component: 3000 - total flux cleaned = -0.00361829 Jy ! Component: 3050 - total flux cleaned = -0.00357868 Jy ! Component: 3100 - total flux cleaned = -0.00350005 Jy ! Component: 3150 - total flux cleaned = -0.00357859 Jy ! Component: 3200 - total flux cleaned = -0.00353959 Jy ! Component: 3250 - total flux cleaned = -0.00361708 Jy ! Component: 3300 - total flux cleaned = -0.00354 Jy ! Component: 3350 - total flux cleaned = -0.00365511 Jy ! Component: 3400 - total flux cleaned = -0.00373131 Jy ! Component: 3450 - total flux cleaned = -0.00376925 Jy ! Component: 3500 - total flux cleaned = -0.00380709 Jy ! Component: 3550 - total flux cleaned = -0.00384454 Jy ! Component: 3600 - total flux cleaned = -0.00391948 Jy ! Component: 3650 - total flux cleaned = -0.00399397 Jy ! Component: 3700 - total flux cleaned = -0.00391984 Jy ! Component: 3750 - total flux cleaned = -0.00395715 Jy ! Component: 3800 - total flux cleaned = -0.00403082 Jy ! Component: 3850 - total flux cleaned = -0.00414102 Jy ! Component: 3900 - total flux cleaned = -0.00410454 Jy ! Component: 3950 - total flux cleaned = -0.0041045 Jy ! Component: 4000 - total flux cleaned = -0.00414085 Jy ! Component: 4050 - total flux cleaned = -0.00421326 Jy ! Total flux subtracted in 4096 components = -0.00417692 Jy ! Clean residual min=-0.002177 max=0.002149 Jy/beam ! Clean residual mean=-0.000000 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 1.72299 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 720 components and 1.72299 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.764 x 23.92 at -14 degrees (North through East) ! Clean map min=-0.0071519 max=1.3706 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.37056 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000645506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.141294 0.141294 0.282588 0.565176 1.13035 2.2607 4.52141 9.04281 18.0856 36.1713 72.3425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.37 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.764 x 23.92 at -14 degrees (North through East) ! Clean map min=-0.0071519 max=1.3706 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:53:05 2019