! Started logfile: J0650-1637_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:41:09 2019 obs J0650-1637_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_05_31_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.753333 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.554557Jy sigma=0.004138 ! Fit after self-cal, rms=0.542955Jy sigma=0.004053 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=6.921 mas, bpa=2.332 degrees ! Estimated noise=3487.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1118 Jy ! Component: 100 - total flux cleaned = 1.40481 Jy ! Total flux subtracted in 100 components = 1.40481 Jy ! Clean residual min=-0.075650 max=0.122895 Jy/beam ! Clean residual mean=-0.000441 rms=0.023404 Jy/beam ! Combined flux in latest and established models = 1.40481 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.40481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263251Jy sigma=0.001900 ! Fit after self-cal, rms=0.263213Jy sigma=0.001899 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.801 mas, bpa=0.3862 degrees ! Estimated noise=3104.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13428 Jy ! Component: 100 - total flux cleaned = 0.19316 Jy ! Component: 150 - total flux cleaned = 0.219597 Jy ! Component: 200 - total flux cleaned = 0.227682 Jy ! Total flux subtracted in 200 components = 0.227682 Jy ! Clean residual min=-0.053583 max=0.073557 Jy/beam ! Clean residual mean=-0.000088 rms=0.015768 Jy/beam ! Combined flux in latest and established models = 1.63249 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 1.63249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192728Jy sigma=0.001355 ! Fit after self-cal, rms=0.192714Jy sigma=0.001354 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.91 HN 1.00* KP 0.98 ! LA 1.00 MK 1.00 NL 0.95 OV 1.00 ! PT 1.15 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.97 ! LA 0.97 MK 0.98 NL 1.08 OV 1.04 ! PT 1.15 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.97 ! LA 0.97 MK 1.00 NL 1.03 OV 0.97 ! PT 1.12 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.89 ! LA 1.00* MK 1.03 NL 1.00* OV 1.00* ! PT 1.12 SC 1.00* ! ! ! Fit before self-cal, rms=0.192714Jy sigma=0.001354 ! Fit after self-cal, rms=0.121675Jy sigma=0.000909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.801 mas, bpa=0.3663 degrees ! Estimated noise=3091.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495617 Jy ! Component: 100 - total flux cleaned = 0.0706343 Jy ! Component: 150 - total flux cleaned = 0.0779526 Jy ! Component: 200 - total flux cleaned = 0.080599 Jy ! Total flux subtracted in 200 components = 0.080599 Jy ! Clean residual min=-0.016902 max=0.024892 Jy/beam ! Clean residual mean=-0.000047 rms=0.005528 Jy/beam ! Combined flux in latest and established models = 1.71309 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 1.71309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102466Jy sigma=0.000745 ! Fit after self-cal, rms=0.101742Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101742Jy sigma=0.000737 ! Fit after self-cal, rms=0.100687Jy sigma=0.000730 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.798 mas, bpa=0.3524 degrees ! Estimated noise=3081.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013561 Jy ! Component: 100 - total flux cleaned = 0.0170227 Jy ! Component: 150 - total flux cleaned = 0.0170333 Jy ! Component: 200 - total flux cleaned = 0.0168092 Jy ! Total flux subtracted in 200 components = 0.0168092 Jy ! Clean residual min=-0.015253 max=0.018122 Jy/beam ! Clean residual mean=-0.000025 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 1.7299 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 1.7299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098455Jy sigma=0.000712 ! Fit after self-cal, rms=0.098435Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385352 Jy ! Component: 100 - total flux cleaned = 0.00432741 Jy ! Component: 150 - total flux cleaned = 0.00394846 Jy ! Component: 200 - total flux cleaned = 0.00360635 Jy ! Total flux subtracted in 200 components = 0.00360635 Jy ! Clean residual min=-0.015494 max=0.017359 Jy/beam ! Clean residual mean=-0.000017 rms=0.004247 Jy/beam ! Combined flux in latest and established models = 1.73351 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 1.73351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097570Jy sigma=0.000703 ! Fit after self-cal, rms=0.097625Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097625Jy sigma=0.000703 ! Fit after self-cal, rms=0.097378Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.799 mas, bpa=0.3293 degrees ! Estimated noise=3082.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532105 Jy ! Component: 100 - total flux cleaned = 0.00652349 Jy ! Component: 150 - total flux cleaned = 0.00686755 Jy ! Component: 200 - total flux cleaned = 0.0067248 Jy ! Total flux subtracted in 200 components = 0.0067248 Jy ! Clean residual min=-0.013700 max=0.015921 Jy/beam ! Clean residual mean=-0.000011 rms=0.003862 Jy/beam ! Combined flux in latest and established models = 1.74023 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 1.74023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096589Jy sigma=0.000694 ! Fit after self-cal, rms=0.096657Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151933 Jy ! Component: 100 - total flux cleaned = 0.0215324 Jy ! Component: 150 - total flux cleaned = 0.0234545 Jy ! Component: 200 - total flux cleaned = 0.0250439 Jy ! Total flux subtracted in 200 components = 0.0250439 Jy ! Clean residual min=-0.011406 max=0.010821 Jy/beam ! Clean residual mean=0.000005 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 1.76527 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 155 components and 1.76527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094073Jy sigma=0.000674 ! Fit after self-cal, rms=0.094042Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094042Jy sigma=0.000674 ! Fit after self-cal, rms=0.093865Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.422 mas, bmaj=18.82 mas, bpa=3.543 degrees ! Estimated noise=4095.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079208 Jy ! Component: 100 - total flux cleaned = 0.00880151 Jy ! Component: 150 - total flux cleaned = 0.0091582 Jy ! Component: 200 - total flux cleaned = 0.00961424 Jy ! Total flux subtracted in 200 components = 0.00961424 Jy ! Clean residual min=-0.012687 max=0.013773 Jy/beam ! Clean residual mean=0.000004 rms=0.004124 Jy/beam ! Combined flux in latest and established models = 1.77489 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 190 components and 1.77489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093401Jy sigma=0.000669 ! Fit after self-cal, rms=0.093366Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554266 Jy ! Component: 100 - total flux cleaned = 0.000786354 Jy ! Component: 150 - total flux cleaned = 0.000991312 Jy ! Component: 200 - total flux cleaned = 0.00135682 Jy ! Total flux subtracted in 200 components = 0.00135682 Jy ! Clean residual min=-0.012513 max=0.013310 Jy/beam ! Clean residual mean=0.000009 rms=0.004057 Jy/beam ! Combined flux in latest and established models = 1.77624 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 197 components and 1.77624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093286Jy sigma=0.000668 ! Fit after self-cal, rms=0.093277Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.8 mas, bpa=0.3315 degrees ! Estimated noise=3082.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.921 x 7.8 at 0.3315 degrees (North through East) ! Clean map min=-0.019018 max=1.4311 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093277Jy sigma=0.000668 ! Fit after self-cal, rms=0.085022Jy sigma=0.000606 ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.799 mas, bpa=0.3802 degrees ! Estimated noise=3079.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319356 Jy ! Component: 100 - total flux cleaned = 0.00156453 Jy ! Component: 150 - total flux cleaned = 0.00221489 Jy ! Component: 200 - total flux cleaned = 0.00253838 Jy ! Total flux subtracted in 200 components = 0.00253838 Jy ! Clean residual min=-0.008451 max=0.009653 Jy/beam ! Clean residual mean=0.000002 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 1.77878 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 213 components and 1.77878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084725Jy sigma=0.000604 ! Fit after self-cal, rms=0.084731Jy sigma=0.000604 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560135 Jy ! Component: 100 - total flux cleaned = 0.000769076 Jy ! Component: 150 - total flux cleaned = 0.000899356 Jy ! Component: 200 - total flux cleaned = 0.00102307 Jy ! Total flux subtracted in 200 components = 0.00102307 Jy ! Clean residual min=-0.008322 max=0.009475 Jy/beam ! Clean residual mean=0.000002 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 1.77981 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 216 components and 1.77981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084626Jy sigma=0.000604 ! Fit after self-cal, rms=0.084634Jy sigma=0.000604 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084634Jy sigma=0.000604 ! Fit after self-cal, rms=0.084586Jy sigma=0.000603 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.526 mas, bmaj=6.937 mas, bpa=2.385 degrees ! Estimated noise=3419.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.08996 Jy ! Component: 100 - total flux cleaned = 1.37021 Jy ! Component: 150 - total flux cleaned = 1.49458 Jy ! Component: 200 - total flux cleaned = 1.56467 Jy ! Total flux subtracted in 200 components = 1.56467 Jy ! Clean residual min=-0.027260 max=0.038551 Jy/beam ! Clean residual mean=-0.000232 rms=0.009303 Jy/beam ! Combined flux in latest and established models = 1.56467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.56467 Jy ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.798 mas, bpa=0.3741 degrees ! Estimated noise=3079.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568179 Jy ! Component: 100 - total flux cleaned = 0.0950396 Jy ! Component: 150 - total flux cleaned = 0.123269 Jy ! Component: 200 - total flux cleaned = 0.144857 Jy ! Total flux subtracted in 200 components = 0.144857 Jy ! Clean residual min=-0.013276 max=0.015253 Jy/beam ! Clean residual mean=-0.000084 rms=0.004488 Jy/beam ! Combined flux in latest and established models = 1.70953 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 70 components and 1.70953 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.417 mas, bmaj=18.81 mas, bpa=3.53 degrees ! Estimated noise=4092.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295495 Jy ! Component: 100 - total flux cleaned = 0.0481134 Jy ! Component: 150 - total flux cleaned = 0.0599999 Jy ! Component: 200 - total flux cleaned = 0.0646418 Jy ! Total flux subtracted in 200 components = 0.0646418 Jy ! Clean residual min=-0.014165 max=0.014533 Jy/beam ! Clean residual mean=-0.000042 rms=0.004410 Jy/beam ! Combined flux in latest and established models = 1.77417 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332151 Jy ! Component: 100 - total flux cleaned = 0.00614535 Jy ! Component: 150 - total flux cleaned = 0.00804952 Jy ! Component: 200 - total flux cleaned = 0.00906383 Jy ! Total flux subtracted in 200 components = 0.00906383 Jy ! Clean residual min=-0.012965 max=0.014764 Jy/beam ! Clean residual mean=-0.000018 rms=0.004089 Jy/beam ! Combined flux in latest and established models = 1.78324 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 162 components and 1.78324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.798 mas, bpa=0.3741 degrees ! Estimated noise=3079.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194993 Jy ! Component: 100 - total flux cleaned = 0.00198531 Jy ! Component: 150 - total flux cleaned = 0.00182096 Jy ! Component: 200 - total flux cleaned = 0.00195318 Jy ! Total flux subtracted in 200 components = 0.00195318 Jy ! Clean residual min=-0.008585 max=0.010340 Jy/beam ! Clean residual mean=-0.000005 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 1.78519 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 185 components and 1.78519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084986Jy sigma=0.000607 ! Fit after self-cal, rms=0.084871Jy sigma=0.000606 wmodel J0650-1637_S_2017_05_31_pus_map.mod ! Writing 185 model components to file: J0650-1637_S_2017_05_31_pus_map.mod wobs J0650-1637_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_05_31_pus_uvs.fits wwins J0650-1637_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J0650-1637_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340283 Jy ! Component: 100 - total flux cleaned = 0.00387533 Jy ! Component: 150 - total flux cleaned = 0.00374177 Jy ! Component: 200 - total flux cleaned = 0.00285825 Jy ! Component: 250 - total flux cleaned = 0.00166472 Jy ! Component: 300 - total flux cleaned = 0.000317715 Jy ! Component: 350 - total flux cleaned = -0.000853076 Jy ! Component: 400 - total flux cleaned = -0.00166183 Jy ! Component: 450 - total flux cleaned = -0.0027184 Jy ! Component: 500 - total flux cleaned = -0.00354302 Jy ! Component: 550 - total flux cleaned = -0.00424498 Jy ! Component: 600 - total flux cleaned = -0.00441345 Jy ! Component: 650 - total flux cleaned = -0.00457427 Jy ! Component: 700 - total flux cleaned = -0.00465083 Jy ! Component: 750 - total flux cleaned = -0.00487799 Jy ! Component: 800 - total flux cleaned = -0.00502465 Jy ! Component: 850 - total flux cleaned = -0.00523823 Jy ! Component: 900 - total flux cleaned = -0.00516848 Jy ! Component: 950 - total flux cleaned = -0.00523396 Jy ! Component: 1000 - total flux cleaned = -0.00510331 Jy ! Component: 1050 - total flux cleaned = -0.00491358 Jy ! Component: 1100 - total flux cleaned = -0.00466621 Jy ! Component: 1150 - total flux cleaned = -0.00430433 Jy ! Component: 1200 - total flux cleaned = -0.00395238 Jy ! Component: 1250 - total flux cleaned = -0.00372436 Jy ! Component: 1300 - total flux cleaned = -0.00355619 Jy ! Component: 1350 - total flux cleaned = -0.00344666 Jy ! Component: 1400 - total flux cleaned = -0.00339202 Jy ! Component: 1450 - total flux cleaned = -0.00318144 Jy ! Component: 1500 - total flux cleaned = -0.00318298 Jy ! Component: 1550 - total flux cleaned = -0.0030325 Jy ! Component: 1600 - total flux cleaned = -0.00298315 Jy ! Component: 1650 - total flux cleaned = -0.00288463 Jy ! Component: 1700 - total flux cleaned = -0.00259746 Jy ! Component: 1750 - total flux cleaned = -0.00250379 Jy ! Component: 1800 - total flux cleaned = -0.00222751 Jy ! Component: 1850 - total flux cleaned = -0.00241015 Jy ! Component: 1900 - total flux cleaned = -0.00232126 Jy ! Component: 1950 - total flux cleaned = -0.00227675 Jy ! Component: 2000 - total flux cleaned = -0.00236318 Jy ! Component: 2050 - total flux cleaned = -0.0023211 Jy ! Component: 2100 - total flux cleaned = -0.00249104 Jy ! Component: 2150 - total flux cleaned = -0.00253307 Jy ! Component: 2200 - total flux cleaned = -0.00261611 Jy ! Component: 2250 - total flux cleaned = -0.00273905 Jy ! Component: 2300 - total flux cleaned = -0.00281994 Jy ! Component: 2350 - total flux cleaned = -0.00282005 Jy ! Component: 2400 - total flux cleaned = -0.00282045 Jy ! Component: 2450 - total flux cleaned = -0.0028997 Jy ! Component: 2500 - total flux cleaned = -0.00297807 Jy ! Component: 2550 - total flux cleaned = -0.00297809 Jy ! Component: 2600 - total flux cleaned = -0.00305517 Jy ! Component: 2650 - total flux cleaned = -0.00320818 Jy ! Component: 2700 - total flux cleaned = -0.00332226 Jy ! Component: 2750 - total flux cleaned = -0.00351079 Jy ! Component: 2800 - total flux cleaned = -0.00366073 Jy ! Component: 2850 - total flux cleaned = -0.00380977 Jy ! Component: 2900 - total flux cleaned = -0.0038841 Jy ! Component: 2950 - total flux cleaned = -0.0040681 Jy ! Component: 3000 - total flux cleaned = -0.00425117 Jy ! Component: 3050 - total flux cleaned = -0.00436044 Jy ! Component: 3100 - total flux cleaned = -0.00454135 Jy ! Component: 3150 - total flux cleaned = -0.0047212 Jy ! Component: 3200 - total flux cleaned = -0.00490034 Jy ! Component: 3250 - total flux cleaned = -0.00511401 Jy ! Component: 3300 - total flux cleaned = -0.00511394 Jy ! Component: 3350 - total flux cleaned = -0.00514954 Jy ! Component: 3400 - total flux cleaned = -0.00529081 Jy ! Component: 3450 - total flux cleaned = -0.00546686 Jy ! Component: 3500 - total flux cleaned = -0.0055729 Jy ! Component: 3550 - total flux cleaned = -0.00567918 Jy ! Component: 3600 - total flux cleaned = -0.00575025 Jy ! Component: 3650 - total flux cleaned = -0.0058211 Jy ! Component: 3700 - total flux cleaned = -0.00589293 Jy ! Component: 3750 - total flux cleaned = -0.00589264 Jy ! Component: 3800 - total flux cleaned = -0.00592863 Jy ! Component: 3850 - total flux cleaned = -0.00596505 Jy ! Component: 3900 - total flux cleaned = -0.00603798 Jy ! Component: 3950 - total flux cleaned = -0.00611165 Jy ! Component: 4000 - total flux cleaned = -0.00611193 Jy ! Component: 4050 - total flux cleaned = -0.00614947 Jy ! Total flux subtracted in 4096 components = -0.00603626 Jy ! Clean residual min=-0.002344 max=0.002197 Jy/beam ! Clean residual mean=-0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.77915 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 445 components and 1.77915 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.798 at 0.3741 degrees (North through East) ! Clean map min=-0.0073501 max=1.4223 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.42231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000564601 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119089 0.119089 0.238177 0.476354 0.952708 1.90542 3.81083 7.62166 15.2433 30.4867 60.9733 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.422 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.798 at 0.3741 degrees (North through East) ! Clean map min=-0.0073501 max=1.4223 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:41:14 2019