! Started logfile: J0650-1637_S_2017_05_27_pus_uvs.log on Fri May 3 10:59:28 2019 obs J0650-1637_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_05_27_pus_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.660819 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.793539Jy sigma=0.063586 ! Fit after self-cal, rms=0.784243Jy sigma=0.063612 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.186 mas, bmaj=8.586 mas, bpa=6.212 degrees ! Estimated noise=520.059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277637 Jy ! Component: 100 - total flux cleaned = 0.448588 Jy ! Total flux subtracted in 100 components = 0.448588 Jy ! Clean residual min=-0.108198 max=0.166636 Jy/beam ! Clean residual mean=-0.000302 rms=0.033955 Jy/beam ! Combined flux in latest and established models = 0.448588 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.448588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.295676Jy sigma=0.015685 ! Fit after self-cal, rms=1.296222Jy sigma=0.015683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=8.771 mas, bpa=5.708 degrees ! Estimated noise=688.981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273564 Jy ! Component: 100 - total flux cleaned = 0.441355 Jy ! Component: 150 - total flux cleaned = 0.475504 Jy ! Component: 200 - total flux cleaned = 0.491951 Jy ! Total flux subtracted in 200 components = 0.491951 Jy ! Clean residual min=-0.192882 max=0.233225 Jy/beam ! Clean residual mean=-0.000701 rms=0.057289 Jy/beam ! Combined flux in latest and established models = 0.940539 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.940539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.911202Jy sigma=0.025769 ! Fit after self-cal, rms=0.997379Jy sigma=0.025657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 15.90 FD 0.89 HN 1.00 KP 0.72 ! LA 0.70 MK 1.07 NL 0.72 OV 0.66 ! PT 0.74 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.59 HN 0.64 KP 0.69 ! LA 0.66 MK 1.02 NL 0.82 OV 0.61 ! PT 0.71 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.62 HN 0.64 KP 0.71 ! LA 0.68 MK 1.05 NL 0.79 OV 0.55 ! PT 0.70 SC 0.90 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 0.72 KP 1.00* ! LA 0.65 MK 1.31 NL 1.00* OV 1.00* ! PT 0.71 SC 1.00* ! ! ! Fit before self-cal, rms=0.997379Jy sigma=0.025657 ! Fit after self-cal, rms=0.450471Jy sigma=0.005453 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.843 mas, bmaj=10.14 mas, bpa=-1.237 degrees ! Estimated noise=1227.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0263724 Jy ! Component: 100 - total flux cleaned = -0.0263377 Jy ! Component: 150 - total flux cleaned = -0.0262597 Jy ! Component: 200 - total flux cleaned = -0.026199 Jy ! Total flux subtracted in 200 components = -0.026199 Jy ! Clean residual min=-0.059980 max=0.087176 Jy/beam ! Clean residual mean=-0.000067 rms=0.015226 Jy/beam ! Combined flux in latest and established models = 0.91434 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.91434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421181Jy sigma=0.005074 ! Fit after self-cal, rms=0.260872Jy sigma=0.003371 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036734 Jy ! Component: 100 - total flux cleaned = 0.0371002 Jy ! Component: 150 - total flux cleaned = 0.0386688 Jy ! Component: 200 - total flux cleaned = 0.0373794 Jy ! Total flux subtracted in 200 components = 0.0373794 Jy ! Clean residual min=-0.053929 max=0.043610 Jy/beam ! Clean residual mean=-0.000068 rms=0.011035 Jy/beam ! Combined flux in latest and established models = 0.951719 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.951719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219409Jy sigma=0.002838 ! Fit after self-cal, rms=0.217599Jy sigma=0.002801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217599Jy sigma=0.002801 ! Fit after self-cal, rms=0.123732Jy sigma=0.001931 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=10.01 mas, bpa=-0.8386 degrees ! Estimated noise=1206.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00668057 Jy ! Component: 100 - total flux cleaned = -0.00661776 Jy ! Component: 150 - total flux cleaned = -0.00805212 Jy ! Component: 200 - total flux cleaned = -0.00993556 Jy ! Total flux subtracted in 200 components = -0.00993556 Jy ! Clean residual min=-0.039542 max=0.032952 Jy/beam ! Clean residual mean=0.000028 rms=0.007824 Jy/beam ! Combined flux in latest and established models = 0.941784 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.941784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113584Jy sigma=0.001751 ! Fit after self-cal, rms=0.112568Jy sigma=0.001734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201374 Jy ! Component: 100 - total flux cleaned = -0.00247671 Jy ! Component: 150 - total flux cleaned = -0.00338499 Jy ! Component: 200 - total flux cleaned = -0.00380319 Jy ! Total flux subtracted in 200 components = -0.00380319 Jy ! Clean residual min=-0.035983 max=0.033172 Jy/beam ! Clean residual mean=0.000029 rms=0.007357 Jy/beam ! Combined flux in latest and established models = 0.937981 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.937981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107936Jy sigma=0.001660 ! Fit after self-cal, rms=0.107491Jy sigma=0.001654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107491Jy sigma=0.001654 ! Fit after self-cal, rms=0.107577Jy sigma=0.001618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=9.997 mas, bpa=-0.9901 degrees ! Estimated noise=1214.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00395385 Jy ! Component: 100 - total flux cleaned = -0.00440091 Jy ! Component: 150 - total flux cleaned = -0.0052767 Jy ! Component: 200 - total flux cleaned = -0.00607894 Jy ! Total flux subtracted in 200 components = -0.00607894 Jy ! Clean residual min=-0.033044 max=0.032243 Jy/beam ! Clean residual mean=-0.000001 rms=0.006877 Jy/beam ! Combined flux in latest and established models = 0.931902 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.931902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103041Jy sigma=0.001542 ! Fit after self-cal, rms=0.102592Jy sigma=0.001536 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301872 Jy ! Component: 100 - total flux cleaned = 0.0427135 Jy ! Component: 150 - total flux cleaned = 0.0448808 Jy ! Component: 200 - total flux cleaned = 0.0460426 Jy ! Total flux subtracted in 200 components = 0.0460426 Jy ! Clean residual min=-0.027159 max=0.021569 Jy/beam ! Clean residual mean=0.000039 rms=0.005622 Jy/beam ! Combined flux in latest and established models = 0.977944 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.977944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093119Jy sigma=0.001385 ! Fit after self-cal, rms=0.092096Jy sigma=0.001375 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092096Jy sigma=0.001375 ! Fit after self-cal, rms=0.090672Jy sigma=0.001350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.795 mas, bmaj=19.73 mas, bpa=-3.634 degrees ! Estimated noise=1339.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106147 Jy ! Component: 100 - total flux cleaned = 0.0141498 Jy ! Component: 150 - total flux cleaned = 0.0152133 Jy ! Component: 200 - total flux cleaned = 0.0158052 Jy ! Total flux subtracted in 200 components = 0.0158052 Jy ! Clean residual min=-0.020786 max=0.016536 Jy/beam ! Clean residual mean=0.000064 rms=0.005115 Jy/beam ! Combined flux in latest and established models = 0.99375 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.99375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088125Jy sigma=0.001304 ! Fit after self-cal, rms=0.087355Jy sigma=0.001295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031409 Jy ! Component: 100 - total flux cleaned = 0.00423623 Jy ! Component: 150 - total flux cleaned = 0.00423032 Jy ! Component: 200 - total flux cleaned = 0.00402141 Jy ! Total flux subtracted in 200 components = 0.00402141 Jy ! Clean residual min=-0.019466 max=0.017352 Jy/beam ! Clean residual mean=0.000079 rms=0.004909 Jy/beam ! Combined flux in latest and established models = 0.997771 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.997771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086544Jy sigma=0.001277 ! Fit after self-cal, rms=0.086215Jy sigma=0.001273 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=9.99 mas, bpa=-1.135 degrees ! Estimated noise=1214.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 9.99 at -1.135 degrees (North through East) ! Clean map min=-0.022817 max=0.60552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086215Jy sigma=0.001273 ! Fit after self-cal, rms=0.082892Jy sigma=0.001223 ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=9.996 mas, bpa=-1.234 degrees ! Estimated noise=1213.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127178 Jy ! Component: 100 - total flux cleaned = -0.00161872 Jy ! Component: 150 - total flux cleaned = -0.00192564 Jy ! Component: 200 - total flux cleaned = -0.00220901 Jy ! Total flux subtracted in 200 components = -0.00220901 Jy ! Clean residual min=-0.021861 max=0.019832 Jy/beam ! Clean residual mean=0.000026 rms=0.004685 Jy/beam ! Combined flux in latest and established models = 0.995562 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.995562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080116Jy sigma=0.001184 ! Fit after self-cal, rms=0.079964Jy sigma=0.001182 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847323 Jy ! Component: 100 - total flux cleaned = 0.000580167 Jy ! Component: 150 - total flux cleaned = 0.000335639 Jy ! Component: 200 - total flux cleaned = 0.000331947 Jy ! Total flux subtracted in 200 components = 0.000331947 Jy ! Clean residual min=-0.021017 max=0.019570 Jy/beam ! Clean residual mean=0.000029 rms=0.004563 Jy/beam ! Combined flux in latest and established models = 0.995894 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.995894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078327Jy sigma=0.001160 ! Fit after self-cal, rms=0.078255Jy sigma=0.001160 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078255Jy sigma=0.001160 ! Fit after self-cal, rms=0.078454Jy sigma=0.001154 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.753 mas, bpa=-2.01 degrees ! Estimated noise=1431.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.647007 Jy ! Component: 100 - total flux cleaned = 0.843239 Jy ! Component: 150 - total flux cleaned = 0.895597 Jy ! Component: 200 - total flux cleaned = 0.916294 Jy ! Total flux subtracted in 200 components = 0.916294 Jy ! Clean residual min=-0.034436 max=0.028704 Jy/beam ! Clean residual mean=0.000038 rms=0.007702 Jy/beam ! Combined flux in latest and established models = 0.916293 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.916293 Jy ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=9.982 mas, bpa=-1.36 degrees ! Estimated noise=1213.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351487 Jy ! Component: 100 - total flux cleaned = 0.0490869 Jy ! Component: 150 - total flux cleaned = 0.0552901 Jy ! Component: 200 - total flux cleaned = 0.0578655 Jy ! Total flux subtracted in 200 components = 0.0578655 Jy ! Clean residual min=-0.025462 max=0.020437 Jy/beam ! Clean residual mean=0.000012 rms=0.005394 Jy/beam ! Combined flux in latest and established models = 0.974159 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.974159 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.76 mas, bmaj=19.78 mas, bpa=-4 degrees ! Estimated noise=1343.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00986192 Jy ! Component: 100 - total flux cleaned = 0.0110927 Jy ! Component: 150 - total flux cleaned = 0.0113567 Jy ! Component: 200 - total flux cleaned = 0.0118053 Jy ! Total flux subtracted in 200 components = 0.0118053 Jy ! Clean residual min=-0.018118 max=0.017449 Jy/beam ! Clean residual mean=0.000043 rms=0.004770 Jy/beam ! Combined flux in latest and established models = 0.985964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204068 Jy ! Component: 100 - total flux cleaned = 0.000403634 Jy ! Component: 150 - total flux cleaned = 0.00058642 Jy ! Component: 200 - total flux cleaned = 0.000587369 Jy ! Total flux subtracted in 200 components = 0.000587369 Jy ! Clean residual min=-0.018110 max=0.016791 Jy/beam ! Clean residual mean=0.000046 rms=0.004685 Jy/beam ! Combined flux in latest and established models = 0.986551 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.986551 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=9.982 mas, bpa=-1.36 degrees ! Estimated noise=1213.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00204851 Jy ! Component: 100 - total flux cleaned = -0.00380329 Jy ! Component: 150 - total flux cleaned = -0.00462314 Jy ! Component: 200 - total flux cleaned = -0.00536976 Jy ! Total flux subtracted in 200 components = -0.00536976 Jy ! Clean residual min=-0.023253 max=0.018118 Jy/beam ! Clean residual mean=0.000023 rms=0.004860 Jy/beam ! Combined flux in latest and established models = 0.981182 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.981182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084057Jy sigma=0.001229 ! Fit after self-cal, rms=0.082945Jy sigma=0.001212 wmodel J0650-1637_S_2017_05_27_pus_map.mod ! Writing 61 model components to file: J0650-1637_S_2017_05_27_pus_map.mod wobs J0650-1637_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_05_27_pus_uvs.fits wwins J0650-1637_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0650-1637_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0103878 Jy ! Component: 100 - total flux cleaned = -0.0194352 Jy ! Component: 150 - total flux cleaned = -0.0253896 Jy ! Component: 200 - total flux cleaned = -0.030283 Jy ! Component: 250 - total flux cleaned = -0.035132 Jy ! Component: 300 - total flux cleaned = -0.0396845 Jy ! Component: 350 - total flux cleaned = -0.0439751 Jy ! Component: 400 - total flux cleaned = -0.0478023 Jy ! Component: 450 - total flux cleaned = -0.051233 Jy ! Component: 500 - total flux cleaned = -0.0547323 Jy ! Component: 550 - total flux cleaned = -0.0578598 Jy ! Component: 600 - total flux cleaned = -0.0606615 Jy ! Component: 650 - total flux cleaned = -0.0633613 Jy ! Component: 700 - total flux cleaned = -0.0652259 Jy ! Component: 750 - total flux cleaned = -0.0673967 Jy ! Component: 800 - total flux cleaned = -0.0689761 Jy ! Component: 850 - total flux cleaned = -0.0705103 Jy ! Component: 900 - total flux cleaned = -0.0721687 Jy ! Component: 950 - total flux cleaned = -0.0731412 Jy ! Component: 1000 - total flux cleaned = -0.0747151 Jy ! Component: 1050 - total flux cleaned = -0.0751775 Jy ! Component: 1100 - total flux cleaned = -0.0757772 Jy ! Component: 1150 - total flux cleaned = -0.076364 Jy ! Component: 1200 - total flux cleaned = -0.0770807 Jy ! Component: 1250 - total flux cleaned = -0.0774969 Jy ! Component: 1300 - total flux cleaned = -0.0774992 Jy ! Component: 1350 - total flux cleaned = -0.0779039 Jy ! Component: 1400 - total flux cleaned = -0.0781664 Jy ! Component: 1450 - total flux cleaned = -0.0784252 Jy ! Component: 1500 - total flux cleaned = -0.0785509 Jy ! Component: 1550 - total flux cleaned = -0.0786743 Jy ! Component: 1600 - total flux cleaned = -0.0789162 Jy ! Component: 1650 - total flux cleaned = -0.0789149 Jy ! Component: 1700 - total flux cleaned = -0.0790316 Jy ! Component: 1750 - total flux cleaned = -0.0790293 Jy ! Component: 1800 - total flux cleaned = -0.0790273 Jy ! Component: 1850 - total flux cleaned = -0.0791362 Jy ! Component: 1900 - total flux cleaned = -0.0790291 Jy ! Component: 1950 - total flux cleaned = -0.0794545 Jy ! Component: 2000 - total flux cleaned = -0.0794559 Jy ! Component: 2050 - total flux cleaned = -0.0799659 Jy ! Component: 2100 - total flux cleaned = -0.0799679 Jy ! Component: 2150 - total flux cleaned = -0.080265 Jy ! Component: 2200 - total flux cleaned = -0.0805568 Jy ! Component: 2250 - total flux cleaned = -0.0809392 Jy ! Component: 2300 - total flux cleaned = -0.0810328 Jy ! Component: 2350 - total flux cleaned = -0.0812173 Jy ! Component: 2400 - total flux cleaned = -0.0814891 Jy ! Component: 2450 - total flux cleaned = -0.0817582 Jy ! Component: 2500 - total flux cleaned = -0.0817577 Jy ! Component: 2550 - total flux cleaned = -0.0817584 Jy ! Component: 2600 - total flux cleaned = -0.0819308 Jy ! Component: 2650 - total flux cleaned = -0.0821848 Jy ! Component: 2700 - total flux cleaned = -0.0821002 Jy ! Component: 2750 - total flux cleaned = -0.0818519 Jy ! Component: 2800 - total flux cleaned = -0.0820123 Jy ! Component: 2850 - total flux cleaned = -0.0817719 Jy ! Component: 2900 - total flux cleaned = -0.0817719 Jy ! Component: 2950 - total flux cleaned = -0.0817722 Jy ! Component: 3000 - total flux cleaned = -0.0817723 Jy ! Component: 3050 - total flux cleaned = -0.0816203 Jy ! Component: 3100 - total flux cleaned = -0.0815448 Jy ! Component: 3150 - total flux cleaned = -0.0812517 Jy ! Component: 3200 - total flux cleaned = -0.0812526 Jy ! Component: 3250 - total flux cleaned = -0.0812525 Jy ! Component: 3300 - total flux cleaned = -0.0810412 Jy ! Component: 3350 - total flux cleaned = -0.0810422 Jy ! Component: 3400 - total flux cleaned = -0.0809728 Jy ! Component: 3450 - total flux cleaned = -0.0810425 Jy ! Component: 3500 - total flux cleaned = -0.0809068 Jy ! Component: 3550 - total flux cleaned = -0.0808406 Jy ! Component: 3600 - total flux cleaned = -0.0808407 Jy ! Component: 3650 - total flux cleaned = -0.0808399 Jy ! Component: 3700 - total flux cleaned = -0.0806461 Jy ! Component: 3750 - total flux cleaned = -0.080775 Jy ! Component: 3800 - total flux cleaned = -0.0807752 Jy ! Component: 3850 - total flux cleaned = -0.0808375 Jy ! Component: 3900 - total flux cleaned = -0.0807127 Jy ! Component: 3950 - total flux cleaned = -0.0807751 Jy ! Component: 4000 - total flux cleaned = -0.080775 Jy ! Component: 4050 - total flux cleaned = -0.0807762 Jy ! Total flux subtracted in 4096 components = -0.0808956 Jy ! Clean residual min=-0.003305 max=0.003329 Jy/beam ! Clean residual mean=0.000001 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.900286 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 308 components and 0.900286 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 9.982 at -1.36 degrees (North through East) ! Clean map min=-0.015961 max=0.62092 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.620916 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105508 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.509771 0.509771 1.01954 2.03908 4.07817 8.15634 16.3127 32.6254 65.2507 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.62 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 9.982 at -1.36 degrees (North through East) ! Clean map min=-0.015961 max=0.62092 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:59:34 2019