! Started logfile: J0650-1637_S_2017_05_01_pus_uvs.log on Wed May 1 18:29:44 2019 obs J0650-1637_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_05_01_pus_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.620072 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 3460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931000Jy sigma=0.006303 ! Fit after self-cal, rms=0.900427Jy sigma=0.006089 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=12.08 mas, bpa=16.84 degrees ! Estimated noise=2466.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39413 Jy ! Component: 100 - total flux cleaned = 1.71286 Jy ! Total flux subtracted in 100 components = 1.71286 Jy ! Clean residual min=-0.071232 max=0.120619 Jy/beam ! Clean residual mean=-0.000437 rms=0.020953 Jy/beam ! Combined flux in latest and established models = 1.71286 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.71286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326414Jy sigma=0.002126 ! Fit after self-cal, rms=0.326286Jy sigma=0.002125 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=13.46 mas, bpa=16.06 degrees ! Estimated noise=1946.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166525 Jy ! Component: 100 - total flux cleaned = 0.242339 Jy ! Component: 150 - total flux cleaned = 0.283251 Jy ! Component: 200 - total flux cleaned = 0.304326 Jy ! Total flux subtracted in 200 components = 0.304326 Jy ! Clean residual min=-0.069207 max=0.073036 Jy/beam ! Clean residual mean=-0.000185 rms=0.017357 Jy/beam ! Combined flux in latest and established models = 2.01719 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 2.01719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232459Jy sigma=0.001518 ! Fit after self-cal, rms=0.231513Jy sigma=0.001513 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.84 HN 0.97 KP 1.04 ! LA 1.01 MK 1.00* NL 1.00 OV 1.07 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 1.02 KP 1.01 ! LA 0.98 MK 1.00* NL 1.08 OV 1.10 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.02 KP 1.03 ! LA 1.01 MK 1.00* NL 1.05 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.95 HN 0.96 KP 1.00* ! LA 0.96 MK 1.00* NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.231513Jy sigma=0.001513 ! Fit after self-cal, rms=0.165436Jy sigma=0.001135 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.503 mas, bmaj=13.52 mas, bpa=16.1 degrees ! Estimated noise=1946.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564167 Jy ! Component: 100 - total flux cleaned = 0.0753397 Jy ! Component: 150 - total flux cleaned = 0.0792606 Jy ! Component: 200 - total flux cleaned = 0.0829451 Jy ! Total flux subtracted in 200 components = 0.0829451 Jy ! Clean residual min=-0.034093 max=0.032643 Jy/beam ! Clean residual mean=0.000227 rms=0.009515 Jy/beam ! Combined flux in latest and established models = 2.10013 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 93 components and 2.10013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145062Jy sigma=0.000997 ! Fit after self-cal, rms=0.144292Jy sigma=0.000992 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144292Jy sigma=0.000992 ! Fit after self-cal, rms=0.120056Jy sigma=0.000802 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.55 mas, bpa=16.14 degrees ! Estimated noise=1938.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081639 Jy ! Component: 100 - total flux cleaned = 0.0102751 Jy ! Component: 150 - total flux cleaned = 0.0110773 Jy ! Component: 200 - total flux cleaned = 0.0117595 Jy ! Total flux subtracted in 200 components = 0.0117595 Jy ! Clean residual min=-0.017114 max=0.021253 Jy/beam ! Clean residual mean=-0.000036 rms=0.005264 Jy/beam ! Combined flux in latest and established models = 2.11189 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 142 components and 2.11189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116073Jy sigma=0.000773 ! Fit after self-cal, rms=0.115595Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125148 Jy ! Component: 100 - total flux cleaned = 0.0110724 Jy ! Component: 150 - total flux cleaned = 0.00986579 Jy ! Component: 200 - total flux cleaned = 0.0105472 Jy ! Total flux subtracted in 200 components = 0.0105472 Jy ! Clean residual min=-0.015329 max=0.018858 Jy/beam ! Clean residual mean=0.000000 rms=0.004369 Jy/beam ! Combined flux in latest and established models = 2.12244 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 185 components and 2.12244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110636Jy sigma=0.000737 ! Fit after self-cal, rms=0.110048Jy sigma=0.000734 ! Inverting map ! Added new window around map position (-46, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134362 Jy ! Component: 100 - total flux cleaned = 0.0184948 Jy ! Component: 150 - total flux cleaned = 0.0202251 Jy ! Component: 200 - total flux cleaned = 0.01961 Jy ! Total flux subtracted in 200 components = 0.01961 Jy ! Clean residual min=-0.012394 max=0.014622 Jy/beam ! Clean residual mean=-0.000008 rms=0.003567 Jy/beam ! Combined flux in latest and established models = 2.14205 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 227 components and 2.14205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106389Jy sigma=0.000711 ! Fit after self-cal, rms=0.106134Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106134Jy sigma=0.000709 ! Fit after self-cal, rms=0.105433Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.57 mas, bpa=16.18 degrees ! Estimated noise=1940.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570772 Jy ! Component: 100 - total flux cleaned = 0.00855353 Jy ! Component: 150 - total flux cleaned = 0.00963428 Jy ! Component: 200 - total flux cleaned = 0.0106277 Jy ! Total flux subtracted in 200 components = 0.0106277 Jy ! Clean residual min=-0.010173 max=0.012136 Jy/beam ! Clean residual mean=-0.000013 rms=0.003042 Jy/beam ! Combined flux in latest and established models = 2.15268 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 260 components and 2.15268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103652Jy sigma=0.000691 ! Fit after self-cal, rms=0.103463Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341559 Jy ! Component: 100 - total flux cleaned = 0.00432758 Jy ! Component: 150 - total flux cleaned = 0.00432949 Jy ! Component: 200 - total flux cleaned = 0.00472028 Jy ! Total flux subtracted in 200 components = 0.00472028 Jy ! Clean residual min=-0.009353 max=0.010627 Jy/beam ! Clean residual mean=-0.000007 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 2.1574 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 286 components and 2.1574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102549Jy sigma=0.000684 ! Fit after self-cal, rms=0.102470Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102470Jy sigma=0.000684 ! Fit after self-cal, rms=0.102437Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.881 mas, bmaj=17.5 mas, bpa=2.975 degrees ! Estimated noise=2171.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724669 Jy ! Component: 100 - total flux cleaned = 0.00906725 Jy ! Component: 150 - total flux cleaned = 0.00887334 Jy ! Component: 200 - total flux cleaned = 0.00887298 Jy ! Total flux subtracted in 200 components = 0.00887298 Jy ! Clean residual min=-0.010614 max=0.010134 Jy/beam ! Clean residual mean=-0.000009 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 2.16627 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 328 components and 2.16627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101840Jy sigma=0.000678 ! Fit after self-cal, rms=0.101767Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204596 Jy ! Component: 100 - total flux cleaned = 0.00298744 Jy ! Component: 150 - total flux cleaned = 0.00327687 Jy ! Component: 200 - total flux cleaned = 0.00353879 Jy ! Total flux subtracted in 200 components = 0.00353879 Jy ! Clean residual min=-0.009925 max=0.009674 Jy/beam ! Clean residual mean=-0.000002 rms=0.002878 Jy/beam ! Combined flux in latest and established models = 2.16981 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 360 components and 2.16981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101404Jy sigma=0.000675 ! Fit after self-cal, rms=0.101369Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.58 mas, bpa=16.21 degrees ! Estimated noise=1941.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.501 x 13.58 at 16.21 degrees (North through East) ! Clean map min=-0.015391 max=1.8105 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101369Jy sigma=0.000675 ! Fit after self-cal, rms=0.092260Jy sigma=0.000611 ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.58 mas, bpa=16.21 degrees ! Estimated noise=1942.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010533 Jy ! Component: 100 - total flux cleaned = 0.0017384 Jy ! Component: 150 - total flux cleaned = 0.00235991 Jy ! Component: 200 - total flux cleaned = 0.00292694 Jy ! Total flux subtracted in 200 components = 0.00292694 Jy ! Clean residual min=-0.008596 max=0.008852 Jy/beam ! Clean residual mean=-0.000006 rms=0.002238 Jy/beam ! Combined flux in latest and established models = 2.17274 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 390 components and 2.17274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091648Jy sigma=0.000608 ! Fit after self-cal, rms=0.091602Jy sigma=0.000607 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112532 Jy ! Component: 100 - total flux cleaned = 0.00151468 Jy ! Component: 150 - total flux cleaned = 0.00211345 Jy ! Component: 200 - total flux cleaned = 0.00256673 Jy ! Total flux subtracted in 200 components = 0.00256673 Jy ! Clean residual min=-0.008032 max=0.008413 Jy/beam ! Clean residual mean=-0.000003 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 2.1753 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 407 components and 2.1753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091275Jy sigma=0.000605 ! Fit after self-cal, rms=0.091253Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091253Jy sigma=0.000605 ! Fit after self-cal, rms=0.091276Jy sigma=0.000604 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=12.19 mas, bpa=17.04 degrees ! Estimated noise=2471.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39527 Jy ! Component: 100 - total flux cleaned = 1.71076 Jy ! Component: 150 - total flux cleaned = 1.83778 Jy ! Component: 200 - total flux cleaned = 1.91065 Jy ! Total flux subtracted in 200 components = 1.91065 Jy ! Clean residual min=-0.021473 max=0.037351 Jy/beam ! Clean residual mean=-0.000208 rms=0.008326 Jy/beam ! Combined flux in latest and established models = 1.91065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.91065 Jy ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.58 mas, bpa=16.23 degrees ! Estimated noise=1943.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656974 Jy ! Component: 100 - total flux cleaned = 0.110193 Jy ! Component: 150 - total flux cleaned = 0.142454 Jy ! Component: 200 - total flux cleaned = 0.167688 Jy ! Total flux subtracted in 200 components = 0.167688 Jy ! Clean residual min=-0.012707 max=0.018058 Jy/beam ! Clean residual mean=-0.000096 rms=0.004869 Jy/beam ! Combined flux in latest and established models = 2.07834 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 125 components and 2.07834 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.883 mas, bmaj=17.51 mas, bpa=2.975 degrees ! Estimated noise=2172.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275492 Jy ! Component: 100 - total flux cleaned = 0.0478021 Jy ! Component: 150 - total flux cleaned = 0.0634717 Jy ! Component: 200 - total flux cleaned = 0.0731399 Jy ! Total flux subtracted in 200 components = 0.0731399 Jy ! Clean residual min=-0.012136 max=0.013480 Jy/beam ! Clean residual mean=-0.000048 rms=0.003873 Jy/beam ! Combined flux in latest and established models = 2.15147 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072246 Jy ! Component: 100 - total flux cleaned = 0.0137335 Jy ! Component: 150 - total flux cleaned = 0.0174914 Jy ! Component: 200 - total flux cleaned = 0.0202915 Jy ! Total flux subtracted in 200 components = 0.0202915 Jy ! Clean residual min=-0.010612 max=0.011048 Jy/beam ! Clean residual mean=-0.000027 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 2.17177 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 249 components and 2.17177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.501 mas, bmaj=13.58 mas, bpa=16.23 degrees ! Estimated noise=1943.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414575 Jy ! Component: 100 - total flux cleaned = 0.00723383 Jy ! Component: 150 - total flux cleaned = 0.00842533 Jy ! Component: 200 - total flux cleaned = 0.00933043 Jy ! Total flux subtracted in 200 components = 0.00933043 Jy ! Clean residual min=-0.008192 max=0.008761 Jy/beam ! Clean residual mean=-0.000009 rms=0.002280 Jy/beam ! Combined flux in latest and established models = 2.1811 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 290 components and 2.1811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091757Jy sigma=0.000608 ! Fit after self-cal, rms=0.091447Jy sigma=0.000606 wmodel J0650-1637_S_2017_05_01_pus_map.mod ! Writing 290 model components to file: J0650-1637_S_2017_05_01_pus_map.mod wobs J0650-1637_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_05_01_pus_uvs.fits wwins J0650-1637_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J0650-1637_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189812 Jy ! Component: 100 - total flux cleaned = -0.00305547 Jy ! Component: 150 - total flux cleaned = -0.00317945 Jy ! Component: 200 - total flux cleaned = -0.00340654 Jy ! Component: 250 - total flux cleaned = -0.00319321 Jy ! Component: 300 - total flux cleaned = -0.00339668 Jy ! Component: 350 - total flux cleaned = -0.00349479 Jy ! Component: 400 - total flux cleaned = -0.00367915 Jy ! Component: 450 - total flux cleaned = -0.00376571 Jy ! Component: 500 - total flux cleaned = -0.00402211 Jy ! Component: 550 - total flux cleaned = -0.00402022 Jy ! Component: 600 - total flux cleaned = -0.00433708 Jy ! Component: 650 - total flux cleaned = -0.0041054 Jy ! Component: 700 - total flux cleaned = -0.00433126 Jy ! Component: 750 - total flux cleaned = -0.0041839 Jy ! Component: 800 - total flux cleaned = -0.00418434 Jy ! Component: 850 - total flux cleaned = -0.00446104 Jy ! Component: 900 - total flux cleaned = -0.00445886 Jy ! Component: 950 - total flux cleaned = -0.004589 Jy ! Component: 1000 - total flux cleaned = -0.00458844 Jy ! Component: 1050 - total flux cleaned = -0.0047125 Jy ! Component: 1100 - total flux cleaned = -0.00477325 Jy ! Component: 1150 - total flux cleaned = -0.00459612 Jy ! Component: 1200 - total flux cleaned = -0.00448022 Jy ! Component: 1250 - total flux cleaned = -0.00419597 Jy ! Component: 1300 - total flux cleaned = -0.00413979 Jy ! Component: 1350 - total flux cleaned = -0.00381399 Jy ! Component: 1400 - total flux cleaned = -0.00386578 Jy ! Component: 1450 - total flux cleaned = -0.00349842 Jy ! Component: 1500 - total flux cleaned = -0.00324164 Jy ! Component: 1550 - total flux cleaned = -0.00324104 Jy ! Component: 1600 - total flux cleaned = -0.00304247 Jy ! Component: 1650 - total flux cleaned = -0.0030426 Jy ! Component: 1700 - total flux cleaned = -0.00280279 Jy ! Component: 1750 - total flux cleaned = -0.00280298 Jy ! Component: 1800 - total flux cleaned = -0.0027107 Jy ! Component: 1850 - total flux cleaned = -0.00257324 Jy ! Component: 1900 - total flux cleaned = -0.0024832 Jy ! Component: 1950 - total flux cleaned = -0.00243914 Jy ! Component: 2000 - total flux cleaned = -0.00235278 Jy ! Component: 2050 - total flux cleaned = -0.0025247 Jy ! Component: 2100 - total flux cleaned = -0.00248209 Jy ! Component: 2150 - total flux cleaned = -0.00256496 Jy ! Component: 2200 - total flux cleaned = -0.00248243 Jy ! Component: 2250 - total flux cleaned = -0.00248268 Jy ! Component: 2300 - total flux cleaned = -0.00240277 Jy ! Component: 2350 - total flux cleaned = -0.00244302 Jy ! Component: 2400 - total flux cleaned = -0.00236453 Jy ! Component: 2450 - total flux cleaned = -0.00228715 Jy ! Component: 2500 - total flux cleaned = -0.00228733 Jy ! Component: 2550 - total flux cleaned = -0.00224969 Jy ! Component: 2600 - total flux cleaned = -0.00224895 Jy ! Component: 2650 - total flux cleaned = -0.00210148 Jy ! Component: 2700 - total flux cleaned = -0.00210126 Jy ! Component: 2750 - total flux cleaned = -0.00195726 Jy ! Component: 2800 - total flux cleaned = -0.00188588 Jy ! Component: 2850 - total flux cleaned = -0.00170985 Jy ! Component: 2900 - total flux cleaned = -0.00167472 Jy ! Component: 2950 - total flux cleaned = -0.00153633 Jy ! Component: 3000 - total flux cleaned = -0.00143362 Jy ! Component: 3050 - total flux cleaned = -0.00133238 Jy ! Component: 3100 - total flux cleaned = -0.00116456 Jy ! Component: 3150 - total flux cleaned = -0.00106488 Jy ! Component: 3200 - total flux cleaned = -0.000900433 Jy ! Component: 3250 - total flux cleaned = -0.000834951 Jy ! Component: 3300 - total flux cleaned = -0.000672469 Jy ! Component: 3350 - total flux cleaned = -0.000544151 Jy ! Component: 3400 - total flux cleaned = -0.000480245 Jy ! Component: 3450 - total flux cleaned = -0.000416949 Jy ! Component: 3500 - total flux cleaned = -0.000385261 Jy ! Component: 3550 - total flux cleaned = -0.000228803 Jy ! Component: 3600 - total flux cleaned = -0.000104385 Jy ! Component: 3650 - total flux cleaned = -4.26453e-05 Jy ! Component: 3700 - total flux cleaned = 8.03643e-05 Jy ! Component: 3750 - total flux cleaned = 0.000110762 Jy ! Component: 3800 - total flux cleaned = 0.000202011 Jy ! Component: 3850 - total flux cleaned = 0.000322899 Jy ! Component: 3900 - total flux cleaned = 0.000443101 Jy ! Component: 3950 - total flux cleaned = 0.00047328 Jy ! Component: 4000 - total flux cleaned = 0.000562934 Jy ! Component: 4050 - total flux cleaned = 0.000681868 Jy ! Total flux subtracted in 4096 components = 0.000740984 Jy ! Clean residual min=-0.001825 max=0.001682 Jy/beam ! Clean residual mean=0.000011 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 2.18184 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 636 components and 2.18184 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.501 x 13.58 at 16.23 degrees (North through East) ! Clean map min=-0.0077989 max=1.8055 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.80551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00051437 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0854668 0.0854668 0.170934 0.341867 0.683735 1.36747 2.73494 5.46988 10.9398 21.8795 43.759 87.518 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.805 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.501 x 13.58 at 16.23 degrees (North through East) ! Clean map min=-0.0077989 max=1.8055 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:29:49 2019