! Started logfile: J0650-1637_S_2017_03_23_pus_uvs.log on Mon May 13 09:52:14 2019 obs J0650-1637_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533333 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.705185Jy sigma=0.004791 ! Fit after self-cal, rms=0.693764Jy sigma=0.004710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=10.34 mas, bpa=6.214 degrees ! Estimated noise=4766.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20776 Jy ! Component: 100 - total flux cleaned = 1.48166 Jy ! Total flux subtracted in 100 components = 1.48166 Jy ! Clean residual min=-0.075141 max=0.109182 Jy/beam ! Clean residual mean=0.000363 rms=0.025343 Jy/beam ! Combined flux in latest and established models = 1.48166 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.48166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349569Jy sigma=0.002269 ! Fit after self-cal, rms=0.349575Jy sigma=0.002269 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=11.92 mas, bpa=8.163 degrees ! Estimated noise=4067.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147637 Jy ! Component: 100 - total flux cleaned = 0.21541 Jy ! Component: 150 - total flux cleaned = 0.252472 Jy ! Component: 200 - total flux cleaned = 0.275582 Jy ! Total flux subtracted in 200 components = 0.275582 Jy ! Clean residual min=-0.065126 max=0.092502 Jy/beam ! Clean residual mean=-0.000004 rms=0.021473 Jy/beam ! Combined flux in latest and established models = 1.75724 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 46 components and 1.75724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274831Jy sigma=0.001874 ! Fit after self-cal, rms=0.274536Jy sigma=0.001872 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.94 KP 1.06 ! LA 1.01 MK 1.00* NL 0.93 OV 1.05 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 KP 0.99 ! LA 0.97 MK 1.00* NL 1.08 OV 1.08 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.98 KP 0.90 ! LA 0.77 MK 1.00* NL 1.22 OV 0.98 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.60 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.274536Jy sigma=0.001872 ! Fit after self-cal, rms=0.130229Jy sigma=0.000917 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=11.96 mas, bpa=8.137 degrees ! Estimated noise=4061.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, -72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515956 Jy ! Component: 100 - total flux cleaned = 0.0744163 Jy ! Component: 150 - total flux cleaned = 0.0790857 Jy ! Component: 200 - total flux cleaned = 0.0826159 Jy ! Total flux subtracted in 200 components = 0.0826159 Jy ! Clean residual min=-0.021862 max=0.021695 Jy/beam ! Clean residual mean=-0.000017 rms=0.005657 Jy/beam ! Combined flux in latest and established models = 1.83986 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 100 components and 1.83986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110544Jy sigma=0.000759 ! Fit after self-cal, rms=0.109676Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109676Jy sigma=0.000752 ! Fit after self-cal, rms=0.108039Jy sigma=0.000745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=11.98 mas, bpa=8.14 degrees ! Estimated noise=4045.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711111 Jy ! Component: 100 - total flux cleaned = 0.00791914 Jy ! Component: 150 - total flux cleaned = 0.00950725 Jy ! Component: 200 - total flux cleaned = 0.010314 Jy ! Total flux subtracted in 200 components = 0.010314 Jy ! Clean residual min=-0.016186 max=0.016445 Jy/beam ! Clean residual mean=-0.000032 rms=0.004464 Jy/beam ! Combined flux in latest and established models = 1.85017 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 1.85017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105707Jy sigma=0.000726 ! Fit after self-cal, rms=0.105546Jy sigma=0.000725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334946 Jy ! Component: 100 - total flux cleaned = 0.0033483 Jy ! Component: 150 - total flux cleaned = 0.00294428 Jy ! Component: 200 - total flux cleaned = 0.00313449 Jy ! Total flux subtracted in 200 components = 0.00313449 Jy ! Clean residual min=-0.014915 max=0.015746 Jy/beam ! Clean residual mean=-0.000022 rms=0.004126 Jy/beam ! Combined flux in latest and established models = 1.85331 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 1.85331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104735Jy sigma=0.000719 ! Fit after self-cal, rms=0.104674Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104674Jy sigma=0.000718 ! Fit after self-cal, rms=0.104147Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=11.99 mas, bpa=8.183 degrees ! Estimated noise=4044.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011344 Jy ! Component: 100 - total flux cleaned = 0.000549141 Jy ! Component: 150 - total flux cleaned = -0.000142006 Jy ! Component: 200 - total flux cleaned = -0.00060621 Jy ! Total flux subtracted in 200 components = -0.00060621 Jy ! Clean residual min=-0.013475 max=0.015028 Jy/beam ! Clean residual mean=-0.000020 rms=0.003765 Jy/beam ! Combined flux in latest and established models = 1.8527 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 1.8527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103502Jy sigma=0.000710 ! Fit after self-cal, rms=0.103460Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982365 Jy ! Component: 100 - total flux cleaned = 0.000413536 Jy ! Component: 150 - total flux cleaned = 0.000156077 Jy ! Component: 200 - total flux cleaned = -7.74792e-05 Jy ! Total flux subtracted in 200 components = -7.74792e-05 Jy ! Clean residual min=-0.012957 max=0.014316 Jy/beam ! Clean residual mean=-0.000014 rms=0.003626 Jy/beam ! Combined flux in latest and established models = 1.85262 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 1.85262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103139Jy sigma=0.000708 ! Fit after self-cal, rms=0.103118Jy sigma=0.000708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103118Jy sigma=0.000708 ! Fit after self-cal, rms=0.102910Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.965 mas, bmaj=16.41 mas, bpa=-4.166 degrees ! Estimated noise=4735.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.19906e-05 Jy ! Component: 100 - total flux cleaned = -0.000891078 Jy ! Component: 150 - total flux cleaned = -0.00125387 Jy ! Component: 200 - total flux cleaned = -0.00158193 Jy ! Total flux subtracted in 200 components = -0.00158193 Jy ! Clean residual min=-0.014911 max=0.016995 Jy/beam ! Clean residual mean=-0.000016 rms=0.004544 Jy/beam ! Combined flux in latest and established models = 1.85104 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 160 components and 1.85104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102777Jy sigma=0.000705 ! Fit after self-cal, rms=0.102768Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483958 Jy ! Component: 100 - total flux cleaned = 9.74193e-05 Jy ! Component: 150 - total flux cleaned = -7.89845e-05 Jy ! Component: 200 - total flux cleaned = -0.000394024 Jy ! Total flux subtracted in 200 components = -0.000394024 Jy ! Clean residual min=-0.014743 max=0.016332 Jy/beam ! Clean residual mean=-0.000009 rms=0.004459 Jy/beam ! Combined flux in latest and established models = 1.85065 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 1.85065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102709Jy sigma=0.000704 ! Fit after self-cal, rms=0.102706Jy sigma=0.000704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=12 mas, bpa=8.212 degrees ! Estimated noise=4044.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 12 at 8.212 degrees (North through East) ! Clean map min=-0.011585 max=1.5781 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102706Jy sigma=0.000704 ! Fit after self-cal, rms=0.093179Jy sigma=0.000638 ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=12 mas, bpa=8.223 degrees ! Estimated noise=4042.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000800622 Jy ! Component: 100 - total flux cleaned = -0.00150685 Jy ! Component: 150 - total flux cleaned = -0.00212212 Jy ! Component: 200 - total flux cleaned = -0.00256031 Jy ! Total flux subtracted in 200 components = -0.00256031 Jy ! Clean residual min=-0.011653 max=0.012826 Jy/beam ! Clean residual mean=-0.000010 rms=0.003274 Jy/beam ! Combined flux in latest and established models = 1.84809 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 187 components and 1.84809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092811Jy sigma=0.000636 ! Fit after self-cal, rms=0.092803Jy sigma=0.000636 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478147 Jy ! Component: 100 - total flux cleaned = 0.000179516 Jy ! Component: 150 - total flux cleaned = -9.90554e-05 Jy ! Component: 200 - total flux cleaned = -0.000359393 Jy ! Total flux subtracted in 200 components = -0.000359393 Jy ! Clean residual min=-0.011440 max=0.012577 Jy/beam ! Clean residual mean=-0.000008 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 1.84773 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 197 components and 1.84773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092616Jy sigma=0.000635 ! Fit after self-cal, rms=0.092614Jy sigma=0.000635 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092614Jy sigma=0.000635 ! Fit after self-cal, rms=0.092506Jy sigma=0.000634 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=10.38 mas, bpa=6.39 degrees ! Estimated noise=4734.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19917 Jy ! Component: 100 - total flux cleaned = 1.46951 Jy ! Component: 150 - total flux cleaned = 1.57846 Jy ! Component: 200 - total flux cleaned = 1.64173 Jy ! Total flux subtracted in 200 components = 1.64173 Jy ! Clean residual min=-0.027487 max=0.035868 Jy/beam ! Clean residual mean=0.000046 rms=0.009843 Jy/beam ! Combined flux in latest and established models = 1.64173 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.64173 Jy ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=12.01 mas, bpa=8.243 degrees ! Estimated noise=4041.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061859 Jy ! Component: 100 - total flux cleaned = 0.102646 Jy ! Component: 150 - total flux cleaned = 0.131389 Jy ! Component: 200 - total flux cleaned = 0.152246 Jy ! Total flux subtracted in 200 components = 0.152246 Jy ! Clean residual min=-0.019142 max=0.019044 Jy/beam ! Clean residual mean=0.000014 rms=0.005632 Jy/beam ! Combined flux in latest and established models = 1.79398 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 69 components and 1.79398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.977 mas, bmaj=16.42 mas, bpa=-4.158 degrees ! Estimated noise=4726.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021568 Jy ! Component: 100 - total flux cleaned = 0.0295377 Jy ! Component: 150 - total flux cleaned = 0.0345494 Jy ! Component: 200 - total flux cleaned = 0.0381077 Jy ! Total flux subtracted in 200 components = 0.0381077 Jy ! Clean residual min=-0.017095 max=0.017492 Jy/beam ! Clean residual mean=-0.000010 rms=0.005239 Jy/beam ! Combined flux in latest and established models = 1.83208 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310447 Jy ! Component: 100 - total flux cleaned = 0.00473251 Jy ! Component: 150 - total flux cleaned = 0.00550213 Jy ! Component: 200 - total flux cleaned = 0.0061675 Jy ! Total flux subtracted in 200 components = 0.0061675 Jy ! Clean residual min=-0.016104 max=0.016560 Jy/beam ! Clean residual mean=-0.000008 rms=0.004683 Jy/beam ! Combined flux in latest and established models = 1.83825 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 146 components and 1.83825 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=12.01 mas, bpa=8.243 degrees ! Estimated noise=4041.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000977418 Jy ! Component: 100 - total flux cleaned = -0.00213416 Jy ! Component: 150 - total flux cleaned = -0.00305983 Jy ! Component: 200 - total flux cleaned = -0.00324228 Jy ! Total flux subtracted in 200 components = -0.00324228 Jy ! Clean residual min=-0.012809 max=0.013066 Jy/beam ! Clean residual mean=0.000000 rms=0.003392 Jy/beam ! Combined flux in latest and established models = 1.83501 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 1.83501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093215Jy sigma=0.000639 ! Fit after self-cal, rms=0.093089Jy sigma=0.000638 wmodel J0650-1637_S_2017_03_23_pus_map.mod ! Writing 171 model components to file: J0650-1637_S_2017_03_23_pus_map.mod wobs J0650-1637_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_03_23_pus_uvs.fits wwins J0650-1637_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0650-1637_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381476 Jy ! Component: 100 - total flux cleaned = -0.00100807 Jy ! Component: 150 - total flux cleaned = -0.00242458 Jy ! Component: 200 - total flux cleaned = -0.00292202 Jy ! Component: 250 - total flux cleaned = -0.0038077 Jy ! Component: 300 - total flux cleaned = -0.00449326 Jy ! Component: 350 - total flux cleaned = -0.00513363 Jy ! Component: 400 - total flux cleaned = -0.00490055 Jy ! Component: 450 - total flux cleaned = -0.00490178 Jy ! Component: 500 - total flux cleaned = -0.00457625 Jy ! Component: 550 - total flux cleaned = -0.00406084 Jy ! Component: 600 - total flux cleaned = -0.00356355 Jy ! Component: 650 - total flux cleaned = -0.00337136 Jy ! Component: 700 - total flux cleaned = -0.00327866 Jy ! Component: 750 - total flux cleaned = -0.00309988 Jy ! Component: 800 - total flux cleaned = -0.00275279 Jy ! Component: 850 - total flux cleaned = -0.00224165 Jy ! Component: 900 - total flux cleaned = -0.00182317 Jy ! Component: 950 - total flux cleaned = -0.00141519 Jy ! Component: 1000 - total flux cleaned = -0.00109457 Jy ! Component: 1050 - total flux cleaned = -0.000779564 Jy ! Component: 1100 - total flux cleaned = -0.000393022 Jy ! Component: 1150 - total flux cleaned = -0.000164117 Jy ! Component: 1200 - total flux cleaned = 6.16766e-05 Jy ! Component: 1250 - total flux cleaned = 0.000136469 Jy ! Component: 1300 - total flux cleaned = 0.000359059 Jy ! Component: 1350 - total flux cleaned = 0.000432357 Jy ! Component: 1400 - total flux cleaned = 0.000651327 Jy ! Component: 1450 - total flux cleaned = 0.000797036 Jy ! Component: 1500 - total flux cleaned = 0.000941226 Jy ! Component: 1550 - total flux cleaned = 0.00101299 Jy ! Component: 1600 - total flux cleaned = 0.00108509 Jy ! Component: 1650 - total flux cleaned = 0.00108492 Jy ! Component: 1700 - total flux cleaned = 0.000870499 Jy ! Component: 1750 - total flux cleaned = 0.000799055 Jy ! Component: 1800 - total flux cleaned = 0.000727191 Jy ! Component: 1850 - total flux cleaned = 0.000510419 Jy ! Component: 1900 - total flux cleaned = 0.000510737 Jy ! Component: 1950 - total flux cleaned = 0.000218708 Jy ! Component: 2000 - total flux cleaned = 7.16302e-05 Jy ! Component: 2050 - total flux cleaned = -1.59618e-06 Jy ! Component: 2100 - total flux cleaned = -0.000224107 Jy ! Component: 2150 - total flux cleaned = -0.000299617 Jy ! Component: 2200 - total flux cleaned = -0.0005263 Jy ! Component: 2250 - total flux cleaned = -0.00075536 Jy ! Component: 2300 - total flux cleaned = -0.000755428 Jy ! Component: 2350 - total flux cleaned = -0.000910716 Jy ! Component: 2400 - total flux cleaned = -0.0010677 Jy ! Component: 2450 - total flux cleaned = -0.0012258 Jy ! Component: 2500 - total flux cleaned = -0.00130569 Jy ! Component: 2550 - total flux cleaned = -0.0014675 Jy ! Component: 2600 - total flux cleaned = -0.00154858 Jy ! Component: 2650 - total flux cleaned = -0.00171468 Jy ! Component: 2700 - total flux cleaned = -0.00188203 Jy ! Component: 2750 - total flux cleaned = -0.0020525 Jy ! Component: 2800 - total flux cleaned = -0.00196604 Jy ! Component: 2850 - total flux cleaned = -0.00205315 Jy ! Component: 2900 - total flux cleaned = -0.00205391 Jy ! Component: 2950 - total flux cleaned = -0.00214382 Jy ! Component: 3000 - total flux cleaned = -0.00205307 Jy ! Component: 3050 - total flux cleaned = -0.00205341 Jy ! Component: 3100 - total flux cleaned = -0.00205385 Jy ! Component: 3150 - total flux cleaned = -0.0020554 Jy ! Component: 3200 - total flux cleaned = -0.00195871 Jy ! Component: 3250 - total flux cleaned = -0.00185897 Jy ! Component: 3300 - total flux cleaned = -0.00185903 Jy ! Component: 3350 - total flux cleaned = -0.00175549 Jy ! Component: 3400 - total flux cleaned = -0.00165091 Jy ! Component: 3450 - total flux cleaned = -0.00165217 Jy ! Component: 3500 - total flux cleaned = -0.0015464 Jy ! Component: 3550 - total flux cleaned = -0.00121741 Jy ! Component: 3600 - total flux cleaned = -0.00110621 Jy ! Component: 3650 - total flux cleaned = -0.00087837 Jy ! Component: 3700 - total flux cleaned = -0.0007636 Jy ! Component: 3750 - total flux cleaned = -0.000527248 Jy ! Component: 3800 - total flux cleaned = -0.000284959 Jy ! Component: 3850 - total flux cleaned = -0.000285868 Jy ! Component: 3900 - total flux cleaned = 8.97277e-05 Jy ! Component: 3950 - total flux cleaned = 0.000216233 Jy ! Component: 4000 - total flux cleaned = 0.000475913 Jy ! Component: 4050 - total flux cleaned = 0.000608459 Jy ! Total flux subtracted in 4096 components = 0.000608309 Jy ! Clean residual min=-0.008425 max=0.008142 Jy/beam ! Clean residual mean=0.000026 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 1.83562 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 414 components and 1.83562 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.873 x 12.01 at 8.243 degrees (North through East) ! Clean map min=-0.021589 max=1.5763 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.57634 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00243559 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.463529 0.463529 0.927058 1.85412 3.70823 7.41646 14.8329 29.6659 59.3317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0073 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.576 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.873 x 12.01 at 8.243 degrees (North through East) ! Clean map min=-0.021589 max=1.5763 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:52:22 2019