! Started logfile: J0650-1637_S_2017_01_21_pus_uvs.log on Sun May 5 15:49:04 2019 obs J0650-1637_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.535882Jy sigma=0.003572 ! Fit after self-cal, rms=0.522642Jy sigma=0.003477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=5.973 mas, bpa=1.784 degrees ! Estimated noise=5121.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07741 Jy ! Component: 100 - total flux cleaned = 1.33652 Jy ! Total flux subtracted in 100 components = 1.33652 Jy ! Clean residual min=-0.058921 max=0.106490 Jy/beam ! Clean residual mean=-0.000426 rms=0.020596 Jy/beam ! Combined flux in latest and established models = 1.33652 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.33652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286152Jy sigma=0.001783 ! Fit after self-cal, rms=0.286086Jy sigma=0.001782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.031 mas, bpa=2 degrees ! Estimated noise=4108.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151323 Jy ! Component: 100 - total flux cleaned = 0.221844 Jy ! Component: 150 - total flux cleaned = 0.257844 Jy ! Component: 200 - total flux cleaned = 0.279207 Jy ! Total flux subtracted in 200 components = 0.279207 Jy ! Clean residual min=-0.049241 max=0.054348 Jy/beam ! Clean residual mean=-0.000499 rms=0.015844 Jy/beam ! Combined flux in latest and established models = 1.61573 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 1.61573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198633Jy sigma=0.001137 ! Fit after self-cal, rms=0.198504Jy sigma=0.001136 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 LA 1.03 ! MK 0.99 NL 1.03 OV 1.00 PT 0.97 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.06 LA 0.97 ! MK 0.98 NL 1.04 OV 1.06 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.05 LA 0.99 ! MK 1.02 NL 1.03 OV 0.95 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.06 LA 0.70 ! MK 1.04 NL 1.00* OV 1.02 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.198504Jy sigma=0.001136 ! Fit after self-cal, rms=0.134095Jy sigma=0.000866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.046 mas, bpa=2.107 degrees ! Estimated noise=4097.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179396 Jy ! Component: 100 - total flux cleaned = -0.00209345 Jy ! Component: 150 - total flux cleaned = -0.00165854 Jy ! Component: 200 - total flux cleaned = -0.00145806 Jy ! Total flux subtracted in 200 components = -0.00145806 Jy ! Clean residual min=-0.030044 max=0.056951 Jy/beam ! Clean residual mean=-0.000196 rms=0.011271 Jy/beam ! Combined flux in latest and established models = 1.61427 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 1.61427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133261Jy sigma=0.000860 ! Fit after self-cal, rms=0.133322Jy sigma=0.000860 ! Inverting map ! Added new window around map position (6, -48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512068 Jy ! Component: 100 - total flux cleaned = 0.0769441 Jy ! Component: 150 - total flux cleaned = 0.0935643 Jy ! Component: 200 - total flux cleaned = 0.106136 Jy ! Total flux subtracted in 200 components = 0.106136 Jy ! Clean residual min=-0.018411 max=0.016220 Jy/beam ! Clean residual mean=-0.000060 rms=0.005420 Jy/beam ! Combined flux in latest and established models = 1.72041 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 1.72041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113027Jy sigma=0.000700 ! Fit after self-cal, rms=0.112198Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112198Jy sigma=0.000694 ! Fit after self-cal, rms=0.110465Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.055 mas, bpa=2.164 degrees ! Estimated noise=4077.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136172 Jy ! Component: 100 - total flux cleaned = 0.0224109 Jy ! Component: 150 - total flux cleaned = 0.025044 Jy ! Component: 200 - total flux cleaned = 0.0268505 Jy ! Total flux subtracted in 200 components = 0.0268505 Jy ! Clean residual min=-0.014655 max=0.016180 Jy/beam ! Clean residual mean=-0.000029 rms=0.004121 Jy/beam ! Combined flux in latest and established models = 1.74726 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 90 components and 1.74726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108400Jy sigma=0.000670 ! Fit after self-cal, rms=0.108371Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298764 Jy ! Component: 100 - total flux cleaned = 0.00437316 Jy ! Component: 150 - total flux cleaned = 0.00527935 Jy ! Component: 200 - total flux cleaned = 0.00596139 Jy ! Total flux subtracted in 200 components = 0.00596139 Jy ! Clean residual min=-0.014146 max=0.016073 Jy/beam ! Clean residual mean=-0.000023 rms=0.003878 Jy/beam ! Combined flux in latest and established models = 1.75322 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 1.75322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107746Jy sigma=0.000665 ! Fit after self-cal, rms=0.107781Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107781Jy sigma=0.000665 ! Fit after self-cal, rms=0.107245Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.057 mas, bpa=2.179 degrees ! Estimated noise=4072.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398515 Jy ! Component: 100 - total flux cleaned = 0.00574681 Jy ! Component: 150 - total flux cleaned = 0.00635806 Jy ! Component: 200 - total flux cleaned = 0.00705938 Jy ! Total flux subtracted in 200 components = 0.00705938 Jy ! Clean residual min=-0.012899 max=0.016005 Jy/beam ! Clean residual mean=-0.000035 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 1.76028 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 1.76028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106733Jy sigma=0.000660 ! Fit after self-cal, rms=0.106755Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90.5, 101.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130212 Jy ! Component: 100 - total flux cleaned = 0.0175033 Jy ! Component: 150 - total flux cleaned = 0.0194228 Jy ! Component: 200 - total flux cleaned = 0.0209953 Jy ! Total flux subtracted in 200 components = 0.0209953 Jy ! Clean residual min=-0.011206 max=0.009997 Jy/beam ! Clean residual mean=-0.000022 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 1.78127 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 1.78127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104810Jy sigma=0.000649 ! Fit after self-cal, rms=0.104637Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104637Jy sigma=0.000648 ! Fit after self-cal, rms=0.104319Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.779 mas, bmaj=16.48 mas, bpa=8.531 degrees ! Estimated noise=5384.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780737 Jy ! Component: 100 - total flux cleaned = 0.0103683 Jy ! Component: 150 - total flux cleaned = 0.0117473 Jy ! Component: 200 - total flux cleaned = 0.0127916 Jy ! Total flux subtracted in 200 components = 0.0127916 Jy ! Clean residual min=-0.015959 max=0.011358 Jy/beam ! Clean residual mean=-0.000052 rms=0.003933 Jy/beam ! Combined flux in latest and established models = 1.79406 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 149 components and 1.79406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103998Jy sigma=0.000645 ! Fit after self-cal, rms=0.103971Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263777 Jy ! Component: 100 - total flux cleaned = 0.00317156 Jy ! Component: 150 - total flux cleaned = 0.00340286 Jy ! Component: 200 - total flux cleaned = 0.003507 Jy ! Total flux subtracted in 200 components = 0.003507 Jy ! Clean residual min=-0.014965 max=0.010855 Jy/beam ! Clean residual mean=-0.000041 rms=0.003674 Jy/beam ! Combined flux in latest and established models = 1.79757 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 1.79757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103846Jy sigma=0.000644 ! Fit after self-cal, rms=0.103838Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.056 mas, bpa=2.191 degrees ! Estimated noise=4068.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 7.056 at 2.191 degrees (North through East) ! Clean map min=-0.018605 max=1.4288 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103838Jy sigma=0.000644 ! Fit after self-cal, rms=0.094643Jy sigma=0.000580 ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.056 mas, bpa=2.194 degrees ! Estimated noise=4067.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258612 Jy ! Component: 100 - total flux cleaned = 0.0032393 Jy ! Component: 150 - total flux cleaned = 0.00379602 Jy ! Component: 200 - total flux cleaned = 0.00399468 Jy ! Total flux subtracted in 200 components = 0.00399468 Jy ! Clean residual min=-0.009429 max=0.009606 Jy/beam ! Clean residual mean=-0.000026 rms=0.002410 Jy/beam ! Combined flux in latest and established models = 1.80157 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 175 components and 1.80157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094299Jy sigma=0.000578 ! Fit after self-cal, rms=0.094292Jy sigma=0.000578 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997794 Jy ! Component: 100 - total flux cleaned = 0.0012613 Jy ! Component: 150 - total flux cleaned = 0.00134359 Jy ! Component: 200 - total flux cleaned = 0.00142329 Jy ! Total flux subtracted in 200 components = 0.00142329 Jy ! Clean residual min=-0.009479 max=0.009544 Jy/beam ! Clean residual mean=-0.000025 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 1.80299 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 189 components and 1.80299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094135Jy sigma=0.000577 ! Fit after self-cal, rms=0.094137Jy sigma=0.000577 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094137Jy sigma=0.000577 ! Fit after self-cal, rms=0.094143Jy sigma=0.000577 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=6.005 mas, bpa=1.981 degrees ! Estimated noise=5076.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06787 Jy ! Component: 100 - total flux cleaned = 1.32021 Jy ! Component: 150 - total flux cleaned = 1.43284 Jy ! Component: 200 - total flux cleaned = 1.49479 Jy ! Total flux subtracted in 200 components = 1.49479 Jy ! Clean residual min=-0.028024 max=0.036254 Jy/beam ! Clean residual mean=-0.000176 rms=0.009251 Jy/beam ! Combined flux in latest and established models = 1.49479 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.49479 Jy ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.058 mas, bpa=2.183 degrees ! Estimated noise=4069.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622547 Jy ! Component: 100 - total flux cleaned = 0.10595 Jy ! Component: 150 - total flux cleaned = 0.138339 Jy ! Component: 200 - total flux cleaned = 0.163631 Jy ! Total flux subtracted in 200 components = 0.163631 Jy ! Clean residual min=-0.023611 max=0.020365 Jy/beam ! Clean residual mean=-0.000218 rms=0.007464 Jy/beam ! Combined flux in latest and established models = 1.65842 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 1.65842 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.777 mas, bmaj=16.49 mas, bpa=8.513 degrees ! Estimated noise=5383.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410617 Jy ! Component: 100 - total flux cleaned = 0.0691625 Jy ! Component: 150 - total flux cleaned = 0.0893228 Jy ! Component: 200 - total flux cleaned = 0.104123 Jy ! Total flux subtracted in 200 components = 0.104123 Jy ! Clean residual min=-0.023046 max=0.017447 Jy/beam ! Clean residual mean=-0.000218 rms=0.006687 Jy/beam ! Combined flux in latest and established models = 1.76254 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110741 Jy ! Component: 100 - total flux cleaned = 0.019465 Jy ! Component: 150 - total flux cleaned = 0.0240375 Jy ! Component: 200 - total flux cleaned = 0.0263681 Jy ! Total flux subtracted in 200 components = 0.0263681 Jy ! Clean residual min=-0.018397 max=0.013914 Jy/beam ! Clean residual mean=-0.000141 rms=0.004942 Jy/beam ! Combined flux in latest and established models = 1.78891 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 131 components and 1.78891 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.058 mas, bpa=2.183 degrees ! Estimated noise=4069.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439826 Jy ! Component: 100 - total flux cleaned = 0.00649472 Jy ! Component: 150 - total flux cleaned = 0.00699362 Jy ! Component: 200 - total flux cleaned = 0.00743877 Jy ! Total flux subtracted in 200 components = 0.00743877 Jy ! Clean residual min=-0.011963 max=0.011464 Jy/beam ! Clean residual mean=-0.000038 rms=0.003014 Jy/beam ! Combined flux in latest and established models = 1.79635 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 152 components and 1.79635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095976Jy sigma=0.000590 ! Fit after self-cal, rms=0.095888Jy sigma=0.000589 wmodel J0650-1637_S_2017_01_21_pus_map.mod ! Writing 152 model components to file: J0650-1637_S_2017_01_21_pus_map.mod wobs J0650-1637_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_01_21_pus_uvs.fits wwins J0650-1637_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0650-1637_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258879 Jy ! Component: 100 - total flux cleaned = -0.00439351 Jy ! Component: 150 - total flux cleaned = -0.00620511 Jy ! Component: 200 - total flux cleaned = -0.00803099 Jy ! Component: 250 - total flux cleaned = -0.00989361 Jy ! Component: 300 - total flux cleaned = -0.0112519 Jy ! Component: 350 - total flux cleaned = -0.0124174 Jy ! Component: 400 - total flux cleaned = -0.0129112 Jy ! Component: 450 - total flux cleaned = -0.0132676 Jy ! Component: 500 - total flux cleaned = -0.0136082 Jy ! Component: 550 - total flux cleaned = -0.0136073 Jy ! Component: 600 - total flux cleaned = -0.0133998 Jy ! Component: 650 - total flux cleaned = -0.0133979 Jy ! Component: 700 - total flux cleaned = -0.0132987 Jy ! Component: 750 - total flux cleaned = -0.0133966 Jy ! Component: 800 - total flux cleaned = -0.0136787 Jy ! Component: 850 - total flux cleaned = -0.0135865 Jy ! Component: 900 - total flux cleaned = -0.013677 Jy ! Component: 950 - total flux cleaned = -0.0137651 Jy ! Component: 1000 - total flux cleaned = -0.0135949 Jy ! Component: 1050 - total flux cleaned = -0.0135129 Jy ! Component: 1100 - total flux cleaned = -0.0135136 Jy ! Component: 1150 - total flux cleaned = -0.0135138 Jy ! Component: 1200 - total flux cleaned = -0.0135135 Jy ! Component: 1250 - total flux cleaned = -0.0134359 Jy ! Component: 1300 - total flux cleaned = -0.0132098 Jy ! Component: 1350 - total flux cleaned = -0.0133584 Jy ! Component: 1400 - total flux cleaned = -0.013213 Jy ! Component: 1450 - total flux cleaned = -0.0130714 Jy ! Component: 1500 - total flux cleaned = -0.013142 Jy ! Component: 1550 - total flux cleaned = -0.0132117 Jy ! Component: 1600 - total flux cleaned = -0.0133473 Jy ! Component: 1650 - total flux cleaned = -0.0133473 Jy ! Component: 1700 - total flux cleaned = -0.0133479 Jy ! Component: 1750 - total flux cleaned = -0.0132205 Jy ! Component: 1800 - total flux cleaned = -0.0133479 Jy ! Component: 1850 - total flux cleaned = -0.0132246 Jy ! Component: 1900 - total flux cleaned = -0.0132865 Jy ! Component: 1950 - total flux cleaned = -0.0132259 Jy ! Component: 2000 - total flux cleaned = -0.0131655 Jy ! Component: 2050 - total flux cleaned = -0.0131055 Jy ! Component: 2100 - total flux cleaned = -0.0130468 Jy ! Component: 2150 - total flux cleaned = -0.0131043 Jy ! Component: 2200 - total flux cleaned = -0.0131031 Jy ! Component: 2250 - total flux cleaned = -0.0131029 Jy ! Component: 2300 - total flux cleaned = -0.0132129 Jy ! Component: 2350 - total flux cleaned = -0.0133213 Jy ! Component: 2400 - total flux cleaned = -0.0134292 Jy ! Component: 2450 - total flux cleaned = -0.0137489 Jy ! Component: 2500 - total flux cleaned = -0.0137493 Jy ! Component: 2550 - total flux cleaned = -0.0139582 Jy ! Component: 2600 - total flux cleaned = -0.0140101 Jy ! Component: 2650 - total flux cleaned = -0.0141637 Jy ! Component: 2700 - total flux cleaned = -0.014265 Jy ! Component: 2750 - total flux cleaned = -0.0144656 Jy ! Component: 2800 - total flux cleaned = -0.014515 Jy ! Component: 2850 - total flux cleaned = -0.0144167 Jy ! Component: 2900 - total flux cleaned = -0.0145629 Jy ! Component: 2950 - total flux cleaned = -0.0145629 Jy ! Component: 3000 - total flux cleaned = -0.0144672 Jy ! Component: 3050 - total flux cleaned = -0.0145147 Jy ! Component: 3100 - total flux cleaned = -0.0145615 Jy ! Component: 3150 - total flux cleaned = -0.0145142 Jy ! Component: 3200 - total flux cleaned = -0.0143276 Jy ! Component: 3250 - total flux cleaned = -0.0142349 Jy ! Component: 3300 - total flux cleaned = -0.0141429 Jy ! Component: 3350 - total flux cleaned = -0.0140972 Jy ! Component: 3400 - total flux cleaned = -0.0140057 Jy ! Component: 3450 - total flux cleaned = -0.0139149 Jy ! Component: 3500 - total flux cleaned = -0.0138244 Jy ! Component: 3550 - total flux cleaned = -0.0135553 Jy ! Component: 3600 - total flux cleaned = -0.0135557 Jy ! Component: 3650 - total flux cleaned = -0.0134667 Jy ! Component: 3700 - total flux cleaned = -0.0131567 Jy ! Component: 3750 - total flux cleaned = -0.0130244 Jy ! Component: 3800 - total flux cleaned = -0.0128488 Jy ! Component: 3850 - total flux cleaned = -0.0125866 Jy ! Component: 3900 - total flux cleaned = -0.0124125 Jy ! Component: 3950 - total flux cleaned = -0.0121952 Jy ! Component: 4000 - total flux cleaned = -0.0120653 Jy ! Component: 4050 - total flux cleaned = -0.011806 Jy ! Total flux subtracted in 4096 components = -0.0116768 Jy ! Clean residual min=-0.002653 max=0.002332 Jy/beam ! Clean residual mean=-0.000015 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 1.78467 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 376 components and 1.78467 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.058 at 2.183 degrees (North through East) ! Clean map min=-0.0081896 max=1.4277 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.42767 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000781732 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.164267 0.164267 0.328534 0.657069 1.31414 2.62827 5.25655 10.5131 21.0262 42.0524 84.1048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.427 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.058 at 2.183 degrees (North through East) ! Clean map min=-0.0081896 max=1.4277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:49:09 2019