! Started logfile: J0650-1637_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:00 2019 obs J0650-1637_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0650-1637_S_2017_01_16_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.423148 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0650-1637 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-1637_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.668730Jy sigma=0.004456 ! Fit after self-cal, rms=0.661674Jy sigma=0.004421 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.217 mas, bmaj=16.2 mas, bpa=7.937 degrees ! Estimated noise=3174.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20988 Jy ! Component: 100 - total flux cleaned = 1.48051 Jy ! Total flux subtracted in 100 components = 1.48051 Jy ! Clean residual min=-0.060886 max=0.091702 Jy/beam ! Clean residual mean=-0.000529 rms=0.019608 Jy/beam ! Combined flux in latest and established models = 1.48051 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.48051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345281Jy sigma=0.001864 ! Fit after self-cal, rms=0.345166Jy sigma=0.001863 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.86 mas, bmaj=18.43 mas, bpa=9.292 degrees ! Estimated noise=2498.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106175 Jy ! Component: 100 - total flux cleaned = 0.162046 Jy ! Component: 150 - total flux cleaned = 0.19738 Jy ! Component: 200 - total flux cleaned = 0.220402 Jy ! Total flux subtracted in 200 components = 0.220402 Jy ! Clean residual min=-0.045421 max=0.063881 Jy/beam ! Clean residual mean=-0.000261 rms=0.012265 Jy/beam ! Combined flux in latest and established models = 1.70091 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 93 components and 1.70091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307978Jy sigma=0.001519 ! Fit after self-cal, rms=0.307031Jy sigma=0.001513 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.00* KP 0.98 ! LA 0.98 MK 1.00* NL 0.91 OV 1.00 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.00* KP 0.95 ! LA 0.95 MK 1.00* NL 1.09 OV 1.02 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.00* KP 1.00 ! LA 0.98 MK 1.00* NL 1.07 OV 0.95 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.00* KP 1.21 ! LA 1.13 MK 1.00* NL 1.00* OV 0.98 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.307031Jy sigma=0.001513 ! Fit after self-cal, rms=0.346955Jy sigma=0.001256 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.896 mas, bmaj=18.54 mas, bpa=9.332 degrees ! Estimated noise=2520.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527365 Jy ! Component: 100 - total flux cleaned = 0.0751878 Jy ! Component: 150 - total flux cleaned = 0.0796022 Jy ! Component: 200 - total flux cleaned = 0.082269 Jy ! Total flux subtracted in 200 components = 0.082269 Jy ! Clean residual min=-0.033754 max=0.032644 Jy/beam ! Clean residual mean=-0.000270 rms=0.009057 Jy/beam ! Combined flux in latest and established models = 1.78318 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 135 components and 1.78318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337894Jy sigma=0.001154 ! Fit after self-cal, rms=0.337480Jy sigma=0.001149 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337480Jy sigma=0.001149 ! Fit after self-cal, rms=0.216598Jy sigma=0.000846 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.875 mas, bmaj=18.55 mas, bpa=8.97 degrees ! Estimated noise=2521.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137077 Jy ! Component: 100 - total flux cleaned = 0.0158962 Jy ! Component: 150 - total flux cleaned = 0.0183674 Jy ! Component: 200 - total flux cleaned = 0.0204541 Jy ! Total flux subtracted in 200 components = 0.0204541 Jy ! Clean residual min=-0.017537 max=0.014631 Jy/beam ! Clean residual mean=-0.000200 rms=0.004412 Jy/beam ! Combined flux in latest and established models = 1.80364 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 163 components and 1.80364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214484Jy sigma=0.000835 ! Fit after self-cal, rms=0.214315Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195951 Jy ! Component: 100 - total flux cleaned = 0.00352973 Jy ! Component: 150 - total flux cleaned = 0.00525064 Jy ! Component: 200 - total flux cleaned = 0.00675065 Jy ! Total flux subtracted in 200 components = 0.00675065 Jy ! Clean residual min=-0.016239 max=0.014253 Jy/beam ! Clean residual mean=-0.000202 rms=0.004249 Jy/beam ! Combined flux in latest and established models = 1.81039 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 190 components and 1.81039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213523Jy sigma=0.000830 ! Fit after self-cal, rms=0.213376Jy sigma=0.000829 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213376Jy sigma=0.000829 ! Fit after self-cal, rms=0.110527Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.88 mas, bmaj=18.59 mas, bpa=8.876 degrees ! Estimated noise=2519.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016109 Jy ! Component: 100 - total flux cleaned = 0.00279629 Jy ! Component: 150 - total flux cleaned = 0.00344676 Jy ! Component: 200 - total flux cleaned = 0.004378 Jy ! Total flux subtracted in 200 components = 0.004378 Jy ! Clean residual min=-0.009705 max=0.013299 Jy/beam ! Clean residual mean=-0.000026 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 1.81476 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 227 components and 1.81477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109957Jy sigma=0.000681 ! Fit after self-cal, rms=0.109748Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118676 Jy ! Component: 100 - total flux cleaned = 0.0154498 Jy ! Component: 150 - total flux cleaned = 0.0171746 Jy ! Component: 200 - total flux cleaned = 0.0185942 Jy ! Total flux subtracted in 200 components = 0.0185942 Jy ! Clean residual min=-0.008919 max=0.007973 Jy/beam ! Clean residual mean=-0.000015 rms=0.002352 Jy/beam ! Combined flux in latest and established models = 1.83336 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 263 components and 1.83336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108362Jy sigma=0.000669 ! Fit after self-cal, rms=0.108020Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108020Jy sigma=0.000667 ! Fit after self-cal, rms=0.107912Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.23 mas, bmaj=20.1 mas, bpa=10.18 degrees ! Estimated noise=2538.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663459 Jy ! Component: 100 - total flux cleaned = 0.00908244 Jy ! Component: 150 - total flux cleaned = 0.00949032 Jy ! Component: 200 - total flux cleaned = 0.00999953 Jy ! Total flux subtracted in 200 components = 0.00999953 Jy ! Clean residual min=-0.007954 max=0.007748 Jy/beam ! Clean residual mean=-0.000027 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 1.84336 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 292 components and 1.84336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107392Jy sigma=0.000661 ! Fit after self-cal, rms=0.107244Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226211 Jy ! Component: 100 - total flux cleaned = 0.00311603 Jy ! Component: 150 - total flux cleaned = 0.00387495 Jy ! Component: 200 - total flux cleaned = 0.00436643 Jy ! Total flux subtracted in 200 components = 0.00436643 Jy ! Clean residual min=-0.007456 max=0.007506 Jy/beam ! Clean residual mean=-0.000027 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 1.84772 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 321 components and 1.84772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107013Jy sigma=0.000658 ! Fit after self-cal, rms=0.106942Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.882 mas, bmaj=18.61 mas, bpa=8.791 degrees ! Estimated noise=2520.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.882 x 18.61 at 8.791 degrees (North through East) ! Clean map min=-0.0093588 max=1.5598 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106942Jy sigma=0.000658 ! Fit after self-cal, rms=0.097944Jy sigma=0.000593 ! Inverting map and beam ! Estimated beam: bmin=9.883 mas, bmaj=18.63 mas, bpa=8.761 degrees ! Estimated noise=2521.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020037 Jy ! Component: 100 - total flux cleaned = 0.00189402 Jy ! Component: 150 - total flux cleaned = 0.00188425 Jy ! Component: 200 - total flux cleaned = 0.00207769 Jy ! Total flux subtracted in 200 components = 0.00207769 Jy ! Clean residual min=-0.007581 max=0.006897 Jy/beam ! Clean residual mean=-0.000037 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 1.8498 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 353 components and 1.8498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097698Jy sigma=0.000591 ! Fit after self-cal, rms=0.097640Jy sigma=0.000591 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846096 Jy ! Component: 100 - total flux cleaned = 0.00102285 Jy ! Component: 150 - total flux cleaned = 0.00110909 Jy ! Component: 200 - total flux cleaned = 0.00149486 Jy ! Total flux subtracted in 200 components = 0.00149486 Jy ! Clean residual min=-0.007150 max=0.006666 Jy/beam ! Clean residual mean=-0.000038 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.8513 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 377 components and 1.8513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097505Jy sigma=0.000590 ! Fit after self-cal, rms=0.097467Jy sigma=0.000589 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097467Jy sigma=0.000589 ! Fit after self-cal, rms=0.097485Jy sigma=0.000589 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.272 mas, bmaj=16.46 mas, bpa=6.673 degrees ! Estimated noise=3180.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20758 Jy ! Component: 100 - total flux cleaned = 1.47378 Jy ! Component: 150 - total flux cleaned = 1.56812 Jy ! Component: 200 - total flux cleaned = 1.62418 Jy ! Total flux subtracted in 200 components = 1.62418 Jy ! Clean residual min=-0.021744 max=0.030077 Jy/beam ! Clean residual mean=-0.000129 rms=0.006749 Jy/beam ! Combined flux in latest and established models = 1.62418 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 1.62418 Jy ! Inverting map and beam ! Estimated beam: bmin=9.882 mas, bmaj=18.63 mas, bpa=8.727 degrees ! Estimated noise=2521.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502243 Jy ! Component: 100 - total flux cleaned = 0.0826832 Jy ! Component: 150 - total flux cleaned = 0.106529 Jy ! Component: 200 - total flux cleaned = 0.125446 Jy ! Total flux subtracted in 200 components = 0.125446 Jy ! Clean residual min=-0.011365 max=0.011222 Jy/beam ! Clean residual mean=-0.000070 rms=0.004068 Jy/beam ! Combined flux in latest and established models = 1.74963 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 149 components and 1.74963 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.23 mas, bmaj=20.11 mas, bpa=10.12 degrees ! Estimated noise=2539.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171808 Jy ! Component: 100 - total flux cleaned = 0.0308817 Jy ! Component: 150 - total flux cleaned = 0.0400484 Jy ! Component: 200 - total flux cleaned = 0.0463665 Jy ! Total flux subtracted in 200 components = 0.0463665 Jy ! Clean residual min=-0.008431 max=0.009444 Jy/beam ! Clean residual mean=-0.000058 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 1.796 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626384 Jy ! Component: 100 - total flux cleaned = 0.0115001 Jy ! Component: 150 - total flux cleaned = 0.0164256 Jy ! Component: 200 - total flux cleaned = 0.0198805 Jy ! Total flux subtracted in 200 components = 0.0198805 Jy ! Clean residual min=-0.007222 max=0.008863 Jy/beam ! Clean residual mean=-0.000052 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 1.81588 Jy ! Adding 161 model components to the UV plane model. ! The established model now contains 304 components and 1.81588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.882 mas, bmaj=18.63 mas, bpa=8.727 degrees ! Estimated noise=2521.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235214 Jy ! Component: 100 - total flux cleaned = 0.00461975 Jy ! Component: 150 - total flux cleaned = 0.00744474 Jy ! Component: 200 - total flux cleaned = 0.00987781 Jy ! Total flux subtracted in 200 components = 0.00987781 Jy ! Clean residual min=-0.006635 max=0.008683 Jy/beam ! Clean residual mean=-0.000044 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 1.82576 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 341 components and 1.82576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098326Jy sigma=0.000595 ! Fit after self-cal, rms=0.098117Jy sigma=0.000594 wmodel J0650-1637_S_2017_01_16_pus_map.mod ! Writing 341 model components to file: J0650-1637_S_2017_01_16_pus_map.mod wobs J0650-1637_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0650-1637_S_2017_01_16_pus_uvs.fits wwins J0650-1637_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0650-1637_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246753 Jy ! Component: 100 - total flux cleaned = 0.00155275 Jy ! Component: 150 - total flux cleaned = 0.00101324 Jy ! Component: 200 - total flux cleaned = 0.00140855 Jy ! Component: 250 - total flux cleaned = 0.00178561 Jy ! Component: 300 - total flux cleaned = 0.00223747 Jy ! Component: 350 - total flux cleaned = 0.00284503 Jy ! Component: 400 - total flux cleaned = 0.00326309 Jy ! Component: 450 - total flux cleaned = 0.00374798 Jy ! Component: 500 - total flux cleaned = 0.00366997 Jy ! Component: 550 - total flux cleaned = 0.00374629 Jy ! Component: 600 - total flux cleaned = 0.00374437 Jy ! Component: 650 - total flux cleaned = 0.0039616 Jy ! Component: 700 - total flux cleaned = 0.00431576 Jy ! Component: 750 - total flux cleaned = 0.00473023 Jy ! Component: 800 - total flux cleaned = 0.00513539 Jy ! Component: 850 - total flux cleaned = 0.00560041 Jy ! Component: 900 - total flux cleaned = 0.00624805 Jy ! Component: 950 - total flux cleaned = 0.00643979 Jy ! Component: 1000 - total flux cleaned = 0.00700212 Jy ! Component: 1050 - total flux cleaned = 0.00736962 Jy ! Component: 1100 - total flux cleaned = 0.00784939 Jy ! Component: 1150 - total flux cleaned = 0.00808426 Jy ! Component: 1200 - total flux cleaned = 0.00854762 Jy ! Component: 1250 - total flux cleaned = 0.00894456 Jy ! Component: 1300 - total flux cleaned = 0.00933509 Jy ! Component: 1350 - total flux cleaned = 0.009664 Jy ! Component: 1400 - total flux cleaned = 0.00998788 Jy ! Component: 1450 - total flux cleaned = 0.0104634 Jy ! Component: 1500 - total flux cleaned = 0.0107231 Jy ! Component: 1550 - total flux cleaned = 0.0111333 Jy ! Component: 1600 - total flux cleaned = 0.0115862 Jy ! Component: 1650 - total flux cleaned = 0.0117846 Jy ! Component: 1700 - total flux cleaned = 0.0119806 Jy ! Component: 1750 - total flux cleaned = 0.0121738 Jy ! Component: 1800 - total flux cleaned = 0.0124114 Jy ! Component: 1850 - total flux cleaned = 0.0123654 Jy ! Component: 1900 - total flux cleaned = 0.0125511 Jy ! Component: 1950 - total flux cleaned = 0.012733 Jy ! Component: 2000 - total flux cleaned = 0.0128673 Jy ! Component: 2050 - total flux cleaned = 0.0129552 Jy ! Component: 2100 - total flux cleaned = 0.0128673 Jy ! Component: 2150 - total flux cleaned = 0.0128658 Jy ! Component: 2200 - total flux cleaned = 0.012524 Jy ! Component: 2250 - total flux cleaned = 0.0125655 Jy ! Component: 2300 - total flux cleaned = 0.0123158 Jy ! Component: 2350 - total flux cleaned = 0.0122341 Jy ! Component: 2400 - total flux cleaned = 0.0119897 Jy ! Component: 2450 - total flux cleaned = 0.0116675 Jy ! Component: 2500 - total flux cleaned = 0.0116282 Jy ! Component: 2550 - total flux cleaned = 0.011392 Jy ! Component: 2600 - total flux cleaned = 0.0113143 Jy ! Component: 2650 - total flux cleaned = 0.011199 Jy ! Component: 2700 - total flux cleaned = 0.0109709 Jy ! Component: 2750 - total flux cleaned = 0.0108206 Jy ! Component: 2800 - total flux cleaned = 0.0107467 Jy ! Component: 2850 - total flux cleaned = 0.0105625 Jy ! Component: 2900 - total flux cleaned = 0.010563 Jy ! Component: 2950 - total flux cleaned = 0.0103824 Jy ! Component: 3000 - total flux cleaned = 0.0104542 Jy ! Component: 3050 - total flux cleaned = 0.0101706 Jy ! Component: 3100 - total flux cleaned = 0.0101706 Jy ! Component: 3150 - total flux cleaned = 0.00999656 Jy ! Component: 3200 - total flux cleaned = 0.00982472 Jy ! Component: 3250 - total flux cleaned = 0.00972276 Jy ! Component: 3300 - total flux cleaned = 0.00958784 Jy ! Component: 3350 - total flux cleaned = 0.00952085 Jy ! Component: 3400 - total flux cleaned = 0.00942172 Jy ! Component: 3450 - total flux cleaned = 0.00942185 Jy ! Component: 3500 - total flux cleaned = 0.00922593 Jy ! Component: 3550 - total flux cleaned = 0.00922623 Jy ! Component: 3600 - total flux cleaned = 0.00912999 Jy ! Component: 3650 - total flux cleaned = 0.00916235 Jy ! Component: 3700 - total flux cleaned = 0.00903602 Jy ! Component: 3750 - total flux cleaned = 0.00900469 Jy ! Component: 3800 - total flux cleaned = 0.00897365 Jy ! Component: 3850 - total flux cleaned = 0.00894269 Jy ! Component: 3900 - total flux cleaned = 0.00885086 Jy ! Component: 3950 - total flux cleaned = 0.00885102 Jy ! Component: 4000 - total flux cleaned = 0.0088205 Jy ! Component: 4050 - total flux cleaned = 0.00885025 Jy ! Total flux subtracted in 4096 components = 0.00879067 Jy ! Clean residual min=-0.001841 max=0.001495 Jy/beam ! Clean residual mean=-0.000016 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 1.83455 Jy keep ! Adding 364 model components to the UV plane model. ! The established model now contains 705 components and 1.83455 Jy ![Exited script file: muppet] wmap "J0650-1637_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.882 x 18.63 at 8.727 degrees (North through East) ! Clean map min=-0.0055019 max=1.5662 Jy/beam ! Writing clean map to FITS file: J0650-1637_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.56616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00062607 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119924 0.119924 0.239848 0.479697 0.959394 1.91879 3.83757 7.67515 15.3503 30.7006 61.4012 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.566 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.882 x 18.63 at 8.727 degrees (North through East) ! Clean map min=-0.0055019 max=1.5662 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-1637_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:06 2019