! Started logfile: J0650-0152_S_2017_07_16_pus_uvs.log on Thu May 9 11:03:01 2019 obs J0650-0152_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0650-0152_S_2017_07_16_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773582 visibilities/baseline/integration-bin. ! Found source: J0650-0152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 19912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650-0152_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 277 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 881 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887648Jy sigma=0.007311 ! Fit after self-cal, rms=0.860519Jy sigma=0.007093 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.667 mas, bpa=-4.262 degrees ! Estimated noise=983.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106079 Jy ! Component: 100 - total flux cleaned = 0.154438 Jy ! Total flux subtracted in 100 components = 0.154438 Jy ! Clean residual min=-0.013571 max=0.024917 Jy/beam ! Clean residual mean=0.000032 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.154438 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.154438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108212Jy sigma=0.000859 ! Fit after self-cal, rms=0.106083Jy sigma=0.000842 ! Inverting map ! Added new window around map position (-1, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347056 Jy ! Component: 100 - total flux cleaned = 0.0544421 Jy ! Total flux subtracted in 100 components = 0.0544421 Jy ! Clean residual min=-0.006816 max=0.010773 Jy/beam ! Clean residual mean=0.000014 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.20888 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.20888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091227Jy sigma=0.000713 ! Fit after self-cal, rms=0.090683Jy sigma=0.000709 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144206 Jy ! Component: 100 - total flux cleaned = 0.0234237 Jy ! Total flux subtracted in 100 components = 0.0234237 Jy ! Clean residual min=-0.004345 max=0.004953 Jy/beam ! Clean residual mean=0.000007 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.232304 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.232304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087666Jy sigma=0.000684 ! Fit after self-cal, rms=0.087585Jy sigma=0.000684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=7.505 mas, bpa=-4.592 degrees ! Estimated noise=712.257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777282 Jy ! Component: 100 - total flux cleaned = 0.0121725 Jy ! Component: 150 - total flux cleaned = 0.014853 Jy ! Component: 200 - total flux cleaned = 0.0164086 Jy ! Total flux subtracted in 200 components = 0.0164086 Jy ! Clean residual min=-0.002754 max=0.002865 Jy/beam ! Clean residual mean=0.000005 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.248713 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.248713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086809Jy sigma=0.000678 ! Fit after self-cal, rms=0.086792Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.98 KP 1.05 ! LA 1.03 MK 1.00 NL 0.90 OV 1.00 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 1.03 ! LA 1.00 MK 1.08 NL 1.04 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.99 KP 1.01 ! LA 1.00 MK 1.12 NL 1.03 OV 0.94 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 1.00* ! LA 0.99 MK 0.82 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.086792Jy sigma=0.000678 ! Fit after self-cal, rms=0.085485Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.498 mas, bpa=-4.294 degrees ! Estimated noise=714.108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377423 Jy ! Component: 100 - total flux cleaned = 0.000379279 Jy ! Component: 150 - total flux cleaned = 0.000353037 Jy ! Component: 200 - total flux cleaned = 0.000308902 Jy ! Total flux subtracted in 200 components = 0.000308902 Jy ! Clean residual min=-0.002324 max=0.002660 Jy/beam ! Clean residual mean=0.000005 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.249022 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.249022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085463Jy sigma=0.000673 ! Fit after self-cal, rms=0.085464Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085464Jy sigma=0.000673 ! Fit after self-cal, rms=0.085845Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.51 mas, bpa=-4.339 degrees ! Estimated noise=713.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.88119e-06 Jy ! Component: 100 - total flux cleaned = -3.03422e-05 Jy ! Component: 150 - total flux cleaned = -4.86311e-05 Jy ! Component: 200 - total flux cleaned = -6.59682e-05 Jy ! Total flux subtracted in 200 components = -6.59682e-05 Jy ! Clean residual min=-0.002356 max=0.002271 Jy/beam ! Clean residual mean=0.000003 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.248956 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.248956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085834Jy sigma=0.000671 ! Fit after self-cal, rms=0.085843Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.82132e-05 Jy ! Component: 100 - total flux cleaned = -7.80384e-05 Jy ! Component: 150 - total flux cleaned = -9.30745e-05 Jy ! Component: 200 - total flux cleaned = -0.000120895 Jy ! Total flux subtracted in 200 components = -0.000120895 Jy ! Clean residual min=-0.002337 max=0.002239 Jy/beam ! Clean residual mean=0.000003 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.248835 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.248835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085836Jy sigma=0.000671 ! Fit after self-cal, rms=0.085835Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085835Jy sigma=0.000671 ! Fit after self-cal, rms=0.085756Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.512 mas, bpa=-4.394 degrees ! Estimated noise=713.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198429 Jy ! Component: 100 - total flux cleaned = -0.00022663 Jy ! Component: 150 - total flux cleaned = -0.000238517 Jy ! Component: 200 - total flux cleaned = -0.000249757 Jy ! Total flux subtracted in 200 components = -0.000249757 Jy ! Clean residual min=-0.002412 max=0.002103 Jy/beam ! Clean residual mean=0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.248585 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.248585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085752Jy sigma=0.000669 ! Fit after self-cal, rms=0.085771Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.82203e-05 Jy ! Component: 100 - total flux cleaned = -7.11024e-05 Jy ! Component: 150 - total flux cleaned = -8.12157e-05 Jy ! Component: 200 - total flux cleaned = -0.000101275 Jy ! Total flux subtracted in 200 components = -0.000101275 Jy ! Clean residual min=-0.002402 max=0.002112 Jy/beam ! Clean residual mean=0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.248484 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.248484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085768Jy sigma=0.000669 ! Fit after self-cal, rms=0.085767Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085767Jy sigma=0.000669 ! Fit after self-cal, rms=0.085849Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.767 mas, bmaj=12.78 mas, bpa=-6.495 degrees ! Estimated noise=951.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.69725e-05 Jy ! Component: 100 - total flux cleaned = 1.30323e-05 Jy ! Component: 150 - total flux cleaned = 3.68258e-05 Jy ! Component: 200 - total flux cleaned = 5.69715e-05 Jy ! Total flux subtracted in 200 components = 5.69715e-05 Jy ! Clean residual min=-0.003011 max=0.003024 Jy/beam ! Clean residual mean=0.000005 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.248541 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.248541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085849Jy sigma=0.000669 ! Fit after self-cal, rms=0.085848Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98173e-05 Jy ! Component: 100 - total flux cleaned = 3.37308e-05 Jy ! Component: 150 - total flux cleaned = 2.36046e-05 Jy ! Component: 200 - total flux cleaned = 2.3568e-05 Jy ! Total flux subtracted in 200 components = 2.3568e-05 Jy ! Clean residual min=-0.003042 max=0.002992 Jy/beam ! Clean residual mean=0.000005 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.248564 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 87 components and 0.248564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085849Jy sigma=0.000669 ! Fit after self-cal, rms=0.085848Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.515 mas, bpa=-4.397 degrees ! Estimated noise=713.631 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.515 at -4.397 degrees (North through East) ! Clean map min=-0.0022907 max=0.1401 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=6.671 mas, bpa=-4.189 degrees ! Estimated noise=1000.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110196 Jy ! Component: 100 - total flux cleaned = 0.163043 Jy ! Component: 150 - total flux cleaned = 0.191473 Jy ! Component: 200 - total flux cleaned = 0.208923 Jy ! Total flux subtracted in 200 components = 0.208923 Jy ! Clean residual min=-0.005053 max=0.009351 Jy/beam ! Clean residual mean=0.000013 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.208923 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.208923 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.515 mas, bpa=-4.397 degrees ! Estimated noise=713.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163079 Jy ! Component: 100 - total flux cleaned = 0.0257594 Jy ! Component: 150 - total flux cleaned = 0.0314443 Jy ! Component: 200 - total flux cleaned = 0.0349103 Jy ! Total flux subtracted in 200 components = 0.0349103 Jy ! Clean residual min=-0.002607 max=0.002727 Jy/beam ! Clean residual mean=0.000006 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.243834 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 54 components and 0.243834 Jy ! Inverting map ! Added new window around map position (-0.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274618 Jy ! Component: 100 - total flux cleaned = 0.0044875 Jy ! Component: 150 - total flux cleaned = 0.0057661 Jy ! Component: 200 - total flux cleaned = 0.0063721 Jy ! Total flux subtracted in 200 components = 0.0063721 Jy ! Clean residual min=-0.002302 max=0.001902 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.250206 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 86 components and 0.250206 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.767 mas, bmaj=12.78 mas, bpa=-6.495 degrees ! Estimated noise=951.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921824 Jy ! Component: 100 - total flux cleaned = 0.00114324 Jy ! Component: 150 - total flux cleaned = 0.00126538 Jy ! Component: 200 - total flux cleaned = 0.0013616 Jy ! Total flux subtracted in 200 components = 0.0013616 Jy ! Clean residual min=-0.002782 max=0.001934 Jy/beam ! Clean residual mean=0.000002 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.251567 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.18665e-05 Jy ! Component: 100 - total flux cleaned = 6.24124e-05 Jy ! Component: 150 - total flux cleaned = 6.36062e-05 Jy ! Component: 200 - total flux cleaned = 5.3289e-05 Jy ! Total flux subtracted in 200 components = 5.3289e-05 Jy ! Clean residual min=-0.002777 max=0.001941 Jy/beam ! Clean residual mean=0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.251621 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 108 components and 0.251621 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.515 mas, bpa=-4.397 degrees ! Estimated noise=713.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012892 Jy ! Component: 100 - total flux cleaned = -0.000181353 Jy ! Component: 150 - total flux cleaned = -0.00022725 Jy ! Component: 200 - total flux cleaned = -0.000248657 Jy ! Total flux subtracted in 200 components = -0.000248657 Jy ! Clean residual min=-0.002222 max=0.001823 Jy/beam ! Clean residual mean=0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.251372 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.251372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085809Jy sigma=0.000668 ! Fit after self-cal, rms=0.085797Jy sigma=0.000668 wmodel J0650-0152_S_2017_07_16_pus_map.mod ! Writing 121 model components to file: J0650-0152_S_2017_07_16_pus_map.mod wobs J0650-0152_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0650-0152_S_2017_07_16_pus_uvs.fits wwins J0650-0152_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J0650-0152_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000723322 Jy ! Component: 100 - total flux cleaned = -0.00113048 Jy ! Component: 150 - total flux cleaned = -0.00135146 Jy ! Component: 200 - total flux cleaned = -0.00143972 Jy ! Component: 250 - total flux cleaned = -0.00152553 Jy ! Component: 300 - total flux cleaned = -0.00166431 Jy ! Component: 350 - total flux cleaned = -0.00182554 Jy ! Component: 400 - total flux cleaned = -0.00187751 Jy ! Component: 450 - total flux cleaned = -0.00200438 Jy ! Component: 500 - total flux cleaned = -0.00212891 Jy ! Component: 550 - total flux cleaned = -0.00225121 Jy ! Component: 600 - total flux cleaned = -0.00237071 Jy ! Component: 650 - total flux cleaned = -0.0024876 Jy ! Component: 700 - total flux cleaned = -0.00251051 Jy ! Component: 750 - total flux cleaned = -0.00255582 Jy ! Component: 800 - total flux cleaned = -0.00264448 Jy ! Component: 850 - total flux cleaned = -0.00270962 Jy ! Component: 900 - total flux cleaned = -0.00277367 Jy ! Component: 950 - total flux cleaned = -0.00283689 Jy ! Component: 1000 - total flux cleaned = -0.00296175 Jy ! Component: 1050 - total flux cleaned = -0.00302337 Jy ! Component: 1100 - total flux cleaned = -0.00314443 Jy ! Component: 1150 - total flux cleaned = -0.00326383 Jy ! Component: 1200 - total flux cleaned = -0.00338128 Jy ! Component: 1250 - total flux cleaned = -0.00347766 Jy ! Component: 1300 - total flux cleaned = -0.0035156 Jy ! Component: 1350 - total flux cleaned = -0.00357217 Jy ! Component: 1400 - total flux cleaned = -0.00366504 Jy ! Component: 1450 - total flux cleaned = -0.00377511 Jy ! Component: 1500 - total flux cleaned = -0.00384796 Jy ! Component: 1550 - total flux cleaned = -0.0039378 Jy ! Component: 1600 - total flux cleaned = -0.00400877 Jy ! Component: 1650 - total flux cleaned = -0.00413156 Jy ! Component: 1700 - total flux cleaned = -0.00421799 Jy ! Component: 1750 - total flux cleaned = -0.00430363 Jy ! Component: 1800 - total flux cleaned = -0.00438801 Jy ! Component: 1850 - total flux cleaned = -0.0044215 Jy ! Component: 1900 - total flux cleaned = -0.00443822 Jy ! Component: 1950 - total flux cleaned = -0.00450372 Jy ! Component: 2000 - total flux cleaned = -0.00455248 Jy ! Component: 2050 - total flux cleaned = -0.00460056 Jy ! Component: 2100 - total flux cleaned = -0.00463251 Jy ! Component: 2150 - total flux cleaned = -0.00475797 Jy ! Component: 2200 - total flux cleaned = -0.00477322 Jy ! Component: 2250 - total flux cleaned = -0.00480367 Jy ! Component: 2300 - total flux cleaned = -0.00484926 Jy ! Component: 2350 - total flux cleaned = -0.00489442 Jy ! Component: 2400 - total flux cleaned = -0.00493931 Jy ! Component: 2450 - total flux cleaned = -0.00504237 Jy ! Component: 2500 - total flux cleaned = -0.0050422 Jy ! Component: 2550 - total flux cleaned = -0.00511476 Jy ! Component: 2600 - total flux cleaned = -0.00517205 Jy ! Component: 2650 - total flux cleaned = -0.00517196 Jy ! Component: 2700 - total flux cleaned = -0.00521414 Jy ! Component: 2750 - total flux cleaned = -0.0052001 Jy ! Component: 2800 - total flux cleaned = -0.00522754 Jy ! Component: 2850 - total flux cleaned = -0.0053097 Jy ! Component: 2900 - total flux cleaned = -0.00532317 Jy ! Component: 2950 - total flux cleaned = -0.00530985 Jy ! Component: 3000 - total flux cleaned = -0.00535003 Jy ! Component: 3050 - total flux cleaned = -0.00535003 Jy ! Component: 3100 - total flux cleaned = -0.00542894 Jy ! Component: 3150 - total flux cleaned = -0.00544181 Jy ! Component: 3200 - total flux cleaned = -0.00540305 Jy ! Component: 3250 - total flux cleaned = -0.00546715 Jy ! Component: 3300 - total flux cleaned = -0.00546704 Jy ! Component: 3350 - total flux cleaned = -0.00542914 Jy ! Component: 3400 - total flux cleaned = -0.00544159 Jy ! Component: 3450 - total flux cleaned = -0.00544155 Jy ! Component: 3500 - total flux cleaned = -0.00545379 Jy ! Component: 3550 - total flux cleaned = -0.0053926 Jy ! Component: 3600 - total flux cleaned = -0.00545326 Jy ! Component: 3650 - total flux cleaned = -0.00538082 Jy ! Component: 3700 - total flux cleaned = -0.00539267 Jy ! Component: 3750 - total flux cleaned = -0.00534501 Jy ! Component: 3800 - total flux cleaned = -0.00534506 Jy ! Component: 3850 - total flux cleaned = -0.00527493 Jy ! Component: 3900 - total flux cleaned = -0.00525167 Jy ! Component: 3950 - total flux cleaned = -0.00520553 Jy ! Component: 4000 - total flux cleaned = -0.00517107 Jy ! Component: 4050 - total flux cleaned = -0.00513692 Jy ! Total flux subtracted in 4096 components = -0.00509181 Jy ! Clean residual min=-0.000718 max=0.000634 Jy/beam ! Clean residual mean=0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.24628 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 403 components and 0.24628 Jy ![Exited script file: muppet] wmap "J0650-0152_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.515 at -4.397 degrees (North through East) ! Clean map min=-0.0013204 max=0.13946 Jy/beam ! Writing clean map to FITS file: J0650-0152_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139458 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204699 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.440346 0.440346 0.880692 1.76138 3.52277 7.04553 14.0911 28.1821 56.3643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.515 at -4.397 degrees (North through East) ! Clean map min=-0.0013204 max=0.13946 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650-0152_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:03:06 2019