! Started logfile: J0650+6001_X_2017_07_16_pus_uvs.log on Thu May  9 14:02:34 2019
obs J0650+6001_X_2017_07_16_pus_uva.fits
! Reading UV FITS file: J0650+6001_X_2017_07_16_pus_uva.fits
! AN table 1: 84 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.711376 visibilities/baseline/integration-bin.
! Found source: J0650+6001
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1200 lines of history.
! 
! Reading 32268 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0650+6001_X_2017_07_16_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.541220Jy  sigma=0.004396
! Fit after  self-cal, rms=0.490631Jy  sigma=0.003990
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=0.9464 mas, bpa=40.17 degrees
! Estimated noise=1026.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.403104 Jy
! Component: 100  -  total flux cleaned = 0.533253 Jy
! Total flux subtracted in 100 components = 0.533253 Jy
! Clean residual min=-0.033411 max=0.126811 Jy/beam
! Clean residual mean=-0.000290 rms=0.010362 Jy/beam
! Combined flux in latest and established models = 0.533254 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.533254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.217451Jy  sigma=0.001816
! Fit after  self-cal, rms=0.217169Jy  sigma=0.001813
! Inverting map 
! Added new window around map position (-1.6, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112164 Jy
! Component: 100  -  total flux cleaned = 0.176308 Jy
! Total flux subtracted in 100 components = 0.176308 Jy
! Clean residual min=-0.020153 max=0.035159 Jy/beam
! Clean residual mean=-0.000168 rms=0.005456 Jy/beam
! Combined flux in latest and established models = 0.709562 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.709562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.134507Jy  sigma=0.001113
! Fit after  self-cal, rms=0.130699Jy  sigma=0.001082
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0477545 Jy
! Component: 100  -  total flux cleaned = 0.0810941 Jy
! Total flux subtracted in 100 components = 0.0810941 Jy
! Clean residual min=-0.013721 max=0.022012 Jy/beam
! Clean residual mean=-0.000113 rms=0.003470 Jy/beam
! Combined flux in latest and established models = 0.790656 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.790656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104797Jy  sigma=0.000853
! Fit after  self-cal, rms=0.104305Jy  sigma=0.000849
! Inverting map 
! Added new window around map position (-0.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259795 Jy
! Component: 100  -  total flux cleaned = 0.0455148 Jy
! Total flux subtracted in 100 components = 0.0455148 Jy
! Clean residual min=-0.011359 max=0.019754 Jy/beam
! Clean residual mean=-0.000080 rms=0.002685 Jy/beam
! Combined flux in latest and established models = 0.836171 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.836171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094861Jy  sigma=0.000764
! Fit after  self-cal, rms=0.094675Jy  sigma=0.000763
! Inverting map 
! Added new window around map position (0.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189963 Jy
! Component: 100  -  total flux cleaned = 0.0326603 Jy
! Total flux subtracted in 100 components = 0.0326603 Jy
! Clean residual min=-0.010172 max=0.012448 Jy/beam
! Clean residual mean=-0.000056 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 0.868831 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 48 components and 0.868831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089566Jy  sigma=0.000718
! Fit after  self-cal, rms=0.089459Jy  sigma=0.000717
! Inverting map 
! Added new window around map position (0.8, 4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134001 Jy
! Component: 100  -  total flux cleaned = 0.0235526 Jy
! Total flux subtracted in 100 components = 0.0235526 Jy
! Clean residual min=-0.008469 max=0.007964 Jy/beam
! Clean residual mean=-0.000041 rms=0.001819 Jy/beam
! Combined flux in latest and established models = 0.892384 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 54 components and 0.892384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087072Jy  sigma=0.000695
! Fit after  self-cal, rms=0.086962Jy  sigma=0.000694
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.97 mas, bmaj=1.17 mas, bpa=38.76 degrees
! Estimated noise=477.872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010424 Jy
! Component: 100  -  total flux cleaned = 0.0180006 Jy
! Component: 150  -  total flux cleaned = 0.0238817 Jy
! Component: 200  -  total flux cleaned = 0.0285557 Jy
! Total flux subtracted in 200 components = 0.0285557 Jy
! Clean residual min=-0.005690 max=0.005357 Jy/beam
! Clean residual mean=-0.000058 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 0.920939 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 0.920939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085286Jy  sigma=0.000679
! Fit after  self-cal, rms=0.085196Jy  sigma=0.000679
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.97     KP        0.99     
!   LA        0.95     MK        0.98     NL        0.97     OV        1.01     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.00     KP        1.03     
!   LA        0.95     MK        0.97     NL        0.97     OV        1.01     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.01     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.97     OV        1.01     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.02     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.98     OV        1.00     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        0.94     KP        0.99     
!   LA        0.97     MK        1.03     NL        0.97     OV        1.01     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        0.97     KP        0.98     
!   LA        0.98     MK        1.00     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.99     KP        1.00     
!   LA        0.98     MK        1.02     NL        0.98     OV        1.02     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        0.98     KP        1.00     
!   LA        0.96     MK        1.01     NL        0.97     OV        1.02     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        0.98     KP        0.99     
!   LA        0.99     MK        0.99     NL        0.97     OV        1.02     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.02     KP        0.99     
!   LA        0.99     MK        1.02     NL        0.98     OV        1.02     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.00     KP        0.97     
!   LA        0.99     MK        1.01     NL        0.98     OV        1.03     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.98     KP        1.00     
!   LA        0.98     MK        1.00     NL        0.98     OV        1.03     
!   PT        1.03     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.085196Jy  sigma=0.000679
! Fit after  self-cal, rms=0.083401Jy  sigma=0.000658
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9811 mas, bmaj=1.174 mas, bpa=38.21 degrees
! Estimated noise=479.656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123773 Jy
! Component: 100  -  total flux cleaned = 0.00220253 Jy
! Component: 150  -  total flux cleaned = 0.00285818 Jy
! Component: 200  -  total flux cleaned = 0.00332107 Jy
! Total flux subtracted in 200 components = 0.00332107 Jy
! Clean residual min=-0.003280 max=0.002811 Jy/beam
! Clean residual mean=0.000004 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.92426 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.92426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083031Jy  sigma=0.000655
! Fit after  self-cal, rms=0.083021Jy  sigma=0.000654
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083021Jy  sigma=0.000654
! Fit after  self-cal, rms=0.082584Jy  sigma=0.000648
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9805 mas, bmaj=1.177 mas, bpa=38.47 degrees
! Estimated noise=480.126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024852 Jy
! Component: 100  -  total flux cleaned = 0.000318139 Jy
! Component: 150  -  total flux cleaned = 0.000389832 Jy
! Component: 200  -  total flux cleaned = 0.000518014 Jy
! Total flux subtracted in 200 components = 0.000518014 Jy
! Clean residual min=-0.002238 max=0.002533 Jy/beam
! Clean residual mean=-0.000004 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.924778 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.924778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082464Jy  sigma=0.000647
! Fit after  self-cal, rms=0.082464Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000737839 Jy
! Component: 100  -  total flux cleaned = 0.000813527 Jy
! Component: 150  -  total flux cleaned = 0.000883919 Jy
! Component: 200  -  total flux cleaned = 0.000945406 Jy
! Total flux subtracted in 200 components = 0.000945406 Jy
! Clean residual min=-0.002055 max=0.002257 Jy/beam
! Clean residual mean=-0.000001 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.925724 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.925724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082337Jy  sigma=0.000646
! Fit after  self-cal, rms=0.082333Jy  sigma=0.000646
! Inverting map 
! Added new window around map position (3, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461674 Jy
! Component: 100  -  total flux cleaned = 0.000828612 Jy
! Component: 150  -  total flux cleaned = 0.00105322 Jy
! Component: 200  -  total flux cleaned = 0.00115818 Jy
! Total flux subtracted in 200 components = 0.00115818 Jy
! Clean residual min=-0.001896 max=0.001681 Jy/beam
! Clean residual mean=0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.926882 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 110 components and 0.926882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082232Jy  sigma=0.000646
! Fit after  self-cal, rms=0.082230Jy  sigma=0.000646
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082230Jy  sigma=0.000646
! Fit after  self-cal, rms=0.082314Jy  sigma=0.000646
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9808 mas, bmaj=1.176 mas, bpa=38.48 degrees
! Estimated noise=480.429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193026 Jy
! Component: 100  -  total flux cleaned = 0.000192903 Jy
! Component: 150  -  total flux cleaned = 0.00014413 Jy
! Component: 200  -  total flux cleaned = 0.000144298 Jy
! Total flux subtracted in 200 components = 0.000144298 Jy
! Clean residual min=-0.001755 max=0.001609 Jy/beam
! Clean residual mean=0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.927026 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.927026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082256Jy  sigma=0.000645
! Fit after  self-cal, rms=0.082256Jy  sigma=0.000645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.7406e-05 Jy
! Component: 100  -  total flux cleaned = 9.68183e-05 Jy
! Component: 150  -  total flux cleaned = 5.87877e-05 Jy
! Component: 200  -  total flux cleaned = 5.96929e-05 Jy
! Total flux subtracted in 200 components = 5.96929e-05 Jy
! Clean residual min=-0.001682 max=0.001558 Jy/beam
! Clean residual mean=0.000002 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.927086 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 120 components and 0.927086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082216Jy  sigma=0.000645
! Fit after  self-cal, rms=0.082215Jy  sigma=0.000645
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082215Jy  sigma=0.000645
! Fit after  self-cal, rms=0.082247Jy  sigma=0.000645
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.33 mas, bpa=50.13 degrees
! Estimated noise=625.632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127001 Jy
! Component: 100  -  total flux cleaned = -6.29289e-05 Jy
! Component: 150  -  total flux cleaned = -0.000125944 Jy
! Component: 200  -  total flux cleaned = -0.000152621 Jy
! Total flux subtracted in 200 components = -0.000152621 Jy
! Clean residual min=-0.001314 max=0.001259 Jy/beam
! Clean residual mean=0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.926933 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 131 components and 0.926933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082242Jy  sigma=0.000645
! Fit after  self-cal, rms=0.082240Jy  sigma=0.000645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.79084e-05 Jy
! Component: 100  -  total flux cleaned = 1.42681e-05 Jy
! Component: 150  -  total flux cleaned = 5.04304e-05 Jy
! Component: 200  -  total flux cleaned = 8.25403e-05 Jy
! Total flux subtracted in 200 components = 8.25403e-05 Jy
! Clean residual min=-0.001312 max=0.001219 Jy/beam
! Clean residual mean=0.000003 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.927016 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.927016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082238Jy  sigma=0.000645
! Fit after  self-cal, rms=0.082237Jy  sigma=0.000645
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9809 mas, bmaj=1.176 mas, bpa=38.48 degrees
! Estimated noise=480.576 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9809 x 1.176 at 38.48 degrees (North through East)
! Clean map  min=-0.0018691  max=0.55356 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082237Jy  sigma=0.000645
! Fit after  self-cal, rms=0.075932Jy  sigma=0.000589
! Inverting map and beam 
! Estimated beam: bmin=0.9809 mas, bmaj=1.176 mas, bpa=38.49 degrees
! Estimated noise=480.578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177566 Jy
! Component: 100  -  total flux cleaned = 0.000139696 Jy
! Component: 150  -  total flux cleaned = 0.000102622 Jy
! Component: 200  -  total flux cleaned = 6.67019e-05 Jy
! Total flux subtracted in 200 components = 6.67019e-05 Jy
! Clean residual min=-0.001615 max=0.001494 Jy/beam
! Clean residual mean=0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.927083 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 143 components and 0.927082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075895Jy  sigma=0.000589
! Fit after  self-cal, rms=0.075895Jy  sigma=0.000589
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.49434e-05 Jy
! Component: 100  -  total flux cleaned = -6.43302e-05 Jy
! Component: 150  -  total flux cleaned = -0.000130038 Jy
! Component: 200  -  total flux cleaned = -0.000223993 Jy
! Total flux subtracted in 200 components = -0.000223993 Jy
! Clean residual min=-0.001561 max=0.001462 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.926858 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 147 components and 0.926858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075868Jy  sigma=0.000589
! Fit after  self-cal, rms=0.075868Jy  sigma=0.000589
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075868Jy  sigma=0.000589
! Fit after  self-cal, rms=0.075878Jy  sigma=0.000589
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8161 mas, bmaj=0.951 mas, bpa=40.1 degrees
! Estimated noise=1038.88 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.40674 Jy
! Component: 100  -  total flux cleaned = 0.558452 Jy
! Component: 150  -  total flux cleaned = 0.654132 Jy
! Component: 200  -  total flux cleaned = 0.718619 Jy
! Total flux subtracted in 200 components = 0.718619 Jy
! Clean residual min=-0.015078 max=0.035510 Jy/beam
! Clean residual mean=-0.000155 rms=0.004780 Jy/beam
! Combined flux in latest and established models = 0.718619 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.718619 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9808 mas, bmaj=1.176 mas, bpa=38.47 degrees
! Estimated noise=480.671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0584385 Jy
! Component: 100  -  total flux cleaned = 0.0962277 Jy
! Component: 150  -  total flux cleaned = 0.122917 Jy
! Component: 200  -  total flux cleaned = 0.142946 Jy
! Total flux subtracted in 200 components = 0.142946 Jy
! Clean residual min=-0.006849 max=0.011594 Jy/beam
! Clean residual mean=-0.000164 rms=0.001930 Jy/beam
! Combined flux in latest and established models = 0.861565 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.861565 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153577 Jy
! Component: 100  -  total flux cleaned = 0.0272771 Jy
! Component: 150  -  total flux cleaned = 0.0365949 Jy
! Component: 200  -  total flux cleaned = 0.0439155 Jy
! Total flux subtracted in 200 components = 0.0439155 Jy
! Clean residual min=-0.004032 max=0.004455 Jy/beam
! Clean residual mean=-0.000055 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.90548 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 52 components and 0.90548 Jy
! Inverting map 
! Added new window around map position (1.4, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584511 Jy
! Component: 100  -  total flux cleaned = 0.0105984 Jy
! Component: 150  -  total flux cleaned = 0.0142646 Jy
! Component: 200  -  total flux cleaned = 0.0159481 Jy
! Total flux subtracted in 200 components = 0.0159481 Jy
! Clean residual min=-0.003185 max=0.002879 Jy/beam
! Clean residual mean=-0.000016 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.921428 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 66 components and 0.921428 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.33 mas, bpa=50.13 degrees
! Estimated noise=625.695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300681 Jy
! Component: 100  -  total flux cleaned = 0.00459338 Jy
! Component: 150  -  total flux cleaned = 0.00523333 Jy
! Component: 200  -  total flux cleaned = 0.00531406 Jy
! Total flux subtracted in 200 components = 0.00531406 Jy
! Clean residual min=-0.001312 max=0.001380 Jy/beam
! Clean residual mean=-0.000004 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.926742 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.11669e-05 Jy
! Component: 100  -  total flux cleaned = 3.04431e-05 Jy
! Component: 150  -  total flux cleaned = 8.09639e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102184 Jy
! Total flux subtracted in 200 components = 0.000102184 Jy
! Clean residual min=-0.001266 max=0.001359 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.926844 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 98 components and 0.926844 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9808 mas, bmaj=1.176 mas, bpa=38.47 degrees
! Estimated noise=480.671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.45336e-05 Jy
! Component: 100  -  total flux cleaned = 0.000304722 Jy
! Component: 150  -  total flux cleaned = 0.000413258 Jy
! Component: 200  -  total flux cleaned = 0.000512096 Jy
! Total flux subtracted in 200 components = 0.000512096 Jy
! Clean residual min=-0.002765 max=0.002413 Jy/beam
! Clean residual mean=-0.000001 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.927356 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 0.927356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076682Jy  sigma=0.000594
! Fit after  self-cal, rms=0.076628Jy  sigma=0.000594
wmodel J0650+6001_X_2017_07_16_pus_map.mod
! Writing 107 model components to file: J0650+6001_X_2017_07_16_pus_map.mod
wobs J0650+6001_X_2017_07_16_pus_uvs.fits
! Writing UV FITS file: J0650+6001_X_2017_07_16_pus_uvs.fits
wwins J0650+6001_X_2017_07_16_pus_map.win
! wwins: Wrote 8 windows to J0650+6001_X_2017_07_16_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.40283e-06 Jy
! Component: 100  -  total flux cleaned = -0.000190698 Jy
! Component: 150  -  total flux cleaned = -0.000405402 Jy
! Component: 200  -  total flux cleaned = -0.000692384 Jy
! Component: 250  -  total flux cleaned = -0.000848586 Jy
! Component: 300  -  total flux cleaned = -0.000848948 Jy
! Component: 350  -  total flux cleaned = -0.000850047 Jy
! Component: 400  -  total flux cleaned = -0.000955764 Jy
! Component: 450  -  total flux cleaned = -0.000920991 Jy
! Component: 500  -  total flux cleaned = -0.000954386 Jy
! Component: 550  -  total flux cleaned = -0.000889516 Jy
! Component: 600  -  total flux cleaned = -0.000889244 Jy
! Component: 650  -  total flux cleaned = -0.000826379 Jy
! Component: 700  -  total flux cleaned = -0.000765101 Jy
! Component: 750  -  total flux cleaned = -0.000765144 Jy
! Component: 800  -  total flux cleaned = -0.000735829 Jy
! Component: 850  -  total flux cleaned = -0.000821876 Jy
! Component: 900  -  total flux cleaned = -0.000849741 Jy
! Component: 950  -  total flux cleaned = -0.000821681 Jy
! Component: 1000  -  total flux cleaned = -0.000822185 Jy
! Component: 1050  -  total flux cleaned = -0.0008763 Jy
! Component: 1100  -  total flux cleaned = -0.000849696 Jy
! Component: 1150  -  total flux cleaned = -0.000849663 Jy
! Component: 1200  -  total flux cleaned = -0.000876025 Jy
! Component: 1250  -  total flux cleaned = -0.0009017 Jy
! Component: 1300  -  total flux cleaned = -0.000926855 Jy
! Component: 1350  -  total flux cleaned = -0.00097629 Jy
! Component: 1400  -  total flux cleaned = -0.000952212 Jy
! Component: 1450  -  total flux cleaned = -0.000904404 Jy
! Component: 1500  -  total flux cleaned = -0.000903978 Jy
! Component: 1550  -  total flux cleaned = -0.000856728 Jy
! Component: 1600  -  total flux cleaned = -0.000787138 Jy
! Component: 1650  -  total flux cleaned = -0.000741319 Jy
! Component: 1700  -  total flux cleaned = -0.000718934 Jy
! Component: 1750  -  total flux cleaned = -0.000718766 Jy
! Component: 1800  -  total flux cleaned = -0.000696728 Jy
! Component: 1850  -  total flux cleaned = -0.000653066 Jy
! Component: 1900  -  total flux cleaned = -0.000674577 Jy
! Component: 1950  -  total flux cleaned = -0.000653107 Jy
! Component: 2000  -  total flux cleaned = -0.000632186 Jy
! Total flux subtracted in 2048 components = -0.000652913 Jy
! Clean residual min=-0.001037 max=0.001228 Jy/beam
! Clean residual mean=-0.000005 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.926704 Jy
keep
! Adding 125 model components to the UV plane model.
! The established model now contains 228 components and 0.926703 Jy
![Exited script file: muppet]
wmap "J0650+6001_X_2017_07_16_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9808 x 1.176 at 38.47 degrees (North through East)
! Clean map  min=-0.0016899  max=0.55559 Jy/beam
! Writing clean map to FITS file: J0650+6001_X_2017_07_16_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.555592 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000347266 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.187512 0.187512 0.375023 0.750047 1.50009 3.00019 6.00037 12.0007 24.0015 48.003 96.006
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.555 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9808 x 1.176 at 38.47 degrees (North through East)
! Clean map  min=-0.0016899  max=0.55559 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0650+6001_X_2017_07_16_pus_uvs.log closed on Thu May  9 14:02:37 2019