! Started logfile: J0649-4108_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:50 2019
obs J0649-4108_S_2017_09_26_pus_uva.fits
! Reading UV FITS file: J0649-4108_S_2017_09_26_pus_uva.fits
! AN table 1: 147 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.1661 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0649-4108
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 674 lines of history.
! 
! Reading 3516 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0649-4108_S_2017_09_26_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 736 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 736 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 736 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 972 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.915856Jy  sigma=0.005213
! Fit after  self-cal, rms=0.845080Jy  sigma=0.004839
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.58 mas, bmaj=193.1 mas, bpa=-19 degrees
! Estimated noise=6652.11 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.115222 Jy
! Component: 100  -  total flux cleaned = 0.15284 Jy
! Total flux subtracted in 100 components = 0.15284 Jy
! Clean residual min=-0.019768 max=0.020655 Jy/beam
! Clean residual mean=-0.000536 rms=0.009735 Jy/beam
! Combined flux in latest and established models = 0.15284 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.15284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122471Jy  sigma=0.000680
! Fit after  self-cal, rms=0.122168Jy  sigma=0.000678
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.9 mas, bmaj=193.1 mas, bpa=-18.72 degrees
! Estimated noise=2278.43 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309769 Jy
! Component: 100  -  total flux cleaned = 0.0496424 Jy
! Component: 150  -  total flux cleaned = 0.0601484 Jy
! Component: 200  -  total flux cleaned = 0.0579786 Jy
! Total flux subtracted in 200 components = 0.0579786 Jy
! Clean residual min=-0.009156 max=0.009168 Jy/beam
! Clean residual mean=-0.000142 rms=0.004287 Jy/beam
! Combined flux in latest and established models = 0.210818 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 114 components and 0.210818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108968Jy  sigma=0.000597
! Fit after  self-cal, rms=0.108191Jy  sigma=0.000591
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.01     
!   LA        0.94     MK        1.00*    NL        1.00*    OV        1.04     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.02     
!   LA        0.93     MK        1.00*    NL        1.00*    OV        1.01     
!   PT        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        0.94     
!   LA        0.95     MK        1.00*    NL        1.00*    OV        1.00     
!   PT        0.97     
! 
! 
! Correcting IF 4.
!  A total of 351 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.108191Jy  sigma=0.000591
! Fit after  self-cal, rms=0.098182Jy  sigma=0.000592
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=187.5 mas, bpa=-18.94 degrees
! Estimated noise=2253.74 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564592 Jy
! Component: 100  -  total flux cleaned = 0.00585205 Jy
! Component: 150  -  total flux cleaned = 0.00570982 Jy
! Component: 200  -  total flux cleaned = 0.00594763 Jy
! Total flux subtracted in 200 components = 0.00594763 Jy
! Clean residual min=-0.000953 max=0.000971 Jy/beam
! Clean residual mean=-0.000006 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.216766 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 180 components and 0.216766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097638Jy  sigma=0.000589
! Fit after  self-cal, rms=0.097588Jy  sigma=0.000589
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097588Jy  sigma=0.000589
! Fit after  self-cal, rms=0.097692Jy  sigma=0.000589
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=187.3 mas, bpa=-18.94 degrees
! Estimated noise=2255.89 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000630105 Jy
! Component: 100  -  total flux cleaned = 0.000619144 Jy
! Component: 150  -  total flux cleaned = 0.000410786 Jy
! Component: 200  -  total flux cleaned = 0.000339579 Jy
! Total flux subtracted in 200 components = 0.000339579 Jy
! Clean residual min=-0.000372 max=0.000367 Jy/beam
! Clean residual mean=-0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.217105 Jy
selfcal
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 251 components and 0.217105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097667Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097659Jy  sigma=0.000588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253592 Jy
! Component: 100  -  total flux cleaned = 0.000416729 Jy
! Component: 150  -  total flux cleaned = 0.000486423 Jy
! Component: 200  -  total flux cleaned = 0.000393854 Jy
! Total flux subtracted in 200 components = 0.000393854 Jy
! Clean residual min=-0.000327 max=0.000321 Jy/beam
! Clean residual mean=0.000001 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.217499 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 303 components and 0.217499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097653Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097651Jy  sigma=0.000588
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097651Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097604Jy  sigma=0.000588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.15 mas, bmaj=187.3 mas, bpa=-18.94 degrees
! Estimated noise=2255.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016964 Jy
! Component: 100  -  total flux cleaned = -0.000152078 Jy
! Component: 150  -  total flux cleaned = -0.000153657 Jy
! Component: 200  -  total flux cleaned = -0.000213767 Jy
! Total flux subtracted in 200 components = -0.000213767 Jy
! Clean residual min=-0.000342 max=0.000344 Jy/beam
! Clean residual mean=0.000002 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.217286 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 337 components and 0.217286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097599Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097592Jy  sigma=0.000588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111587 Jy
! Component: 100  -  total flux cleaned = 0.000269394 Jy
! Component: 150  -  total flux cleaned = 0.000283828 Jy
! Component: 200  -  total flux cleaned = 0.000268846 Jy
! Total flux subtracted in 200 components = 0.000268846 Jy
! Clean residual min=-0.000283 max=0.000279 Jy/beam
! Clean residual mean=0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.217554 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 390 components and 0.217554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097588Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097521Jy  sigma=0.000588
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097521Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097482Jy  sigma=0.000588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.49 mas, bmaj=185.7 mas, bpa=-18.99 degrees
! Estimated noise=2254.65 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.52472e-05 Jy
! Component: 100  -  total flux cleaned = 0.000158437 Jy
! Component: 150  -  total flux cleaned = 0.000296225 Jy
! Component: 200  -  total flux cleaned = 0.000360662 Jy
! Total flux subtracted in 200 components = 0.000360662 Jy
! Clean residual min=-0.000277 max=0.000276 Jy/beam
! Clean residual mean=0.000002 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.217915 Jy
selfcal
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 473 components and 0.217915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097477Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097479Jy  sigma=0.000588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.34931e-05 Jy
! Component: 100  -  total flux cleaned = 0.000190162 Jy
! Component: 150  -  total flux cleaned = 0.000243193 Jy
! Component: 200  -  total flux cleaned = 0.000284096 Jy
! Total flux subtracted in 200 components = 0.000284096 Jy
! Clean residual min=-0.000241 max=0.000242 Jy/beam
! Clean residual mean=0.000001 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.218199 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 527 components and 0.218199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097475Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097476Jy  sigma=0.000588
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=187.3 mas, bpa=-18.94 degrees
! Estimated noise=2253.85 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.14 x 187.3 at -18.94 degrees (North through East)
! Clean map  min=-0.0084301  max=0.16524 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.53 mas, bmaj=194.4 mas, bpa=-19.06 degrees
! Estimated noise=6261.23 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106034 Jy
! Component: 100  -  total flux cleaned = 0.146586 Jy
! Component: 150  -  total flux cleaned = 0.166965 Jy
! Component: 200  -  total flux cleaned = 0.179061 Jy
! Total flux subtracted in 200 components = 0.179061 Jy
! Clean residual min=-0.011199 max=0.011369 Jy/beam
! Clean residual mean=-0.000320 rms=0.005308 Jy/beam
! Combined flux in latest and established models = 0.179061 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.179061 Jy
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=187.3 mas, bpa=-18.94 degrees
! Estimated noise=2253.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01489 Jy
! Component: 100  -  total flux cleaned = 0.0223737 Jy
! Component: 150  -  total flux cleaned = 0.0264823 Jy
! Component: 200  -  total flux cleaned = 0.0289475 Jy
! Total flux subtracted in 200 components = 0.0289475 Jy
! Clean residual min=-0.002814 max=0.002875 Jy/beam
! Clean residual mean=-0.000068 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 0.208009 Jy
! Adding 105 model components to the UV plane model.
! The established model now contains 163 components and 0.208009 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.49 mas, bmaj=185.7 mas, bpa=-18.99 degrees
! Estimated noise=2254.65 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186041 Jy
! Component: 100  -  total flux cleaned = 0.00223959 Jy
! Component: 150  -  total flux cleaned = 0.00128418 Jy
! Component: 200  -  total flux cleaned = 0.000166845 Jy
! Total flux subtracted in 200 components = 0.000166845 Jy
! Clean residual min=-0.002117 max=0.002101 Jy/beam
! Clean residual mean=-0.000010 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.208176 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144182 Jy
! Component: 100  -  total flux cleaned = -0.00246796 Jy
! Component: 150  -  total flux cleaned = -0.00363627 Jy
! Component: 200  -  total flux cleaned = -0.00444823 Jy
! Total flux subtracted in 200 components = -0.00444823 Jy
! Clean residual min=-0.003518 max=0.003567 Jy/beam
! Clean residual mean=0.000018 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.203727 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 221 components and 0.203727 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=187.3 mas, bpa=-18.94 degrees
! Estimated noise=2253.85 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.48294e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100474 Jy
! Component: 150  -  total flux cleaned = -0.000315009 Jy
! Component: 200  -  total flux cleaned = -0.000657652 Jy
! Total flux subtracted in 200 components = -0.000657652 Jy
! Clean residual min=-0.001140 max=0.001131 Jy/beam
! Clean residual mean=-0.000007 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.20307 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 261 components and 0.20307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097490Jy  sigma=0.000588
! Fit after  self-cal, rms=0.097490Jy  sigma=0.000588
wmodel J0649-4108_S_2017_09_26_pus_map.mod
! Writing 261 model components to file: J0649-4108_S_2017_09_26_pus_map.mod
wobs J0649-4108_S_2017_09_26_pus_uvs.fits
! Writing UV FITS file: J0649-4108_S_2017_09_26_pus_uvs.fits
wwins J0649-4108_S_2017_09_26_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0649-4108_S_2017_09_26_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.14 x 187.3 at -18.94 degrees (North through East)
! Clean map  min=-0.0091615  max=0.16375 Jy/beam
! Writing clean map to FITS file: J0649-4108_S_2017_09_26_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.163755 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000355138 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.650617 0.650617 1.30123 2.60247 5.20493 10.4099 20.8197 41.6395 83.2789
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.163 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 16.14 x 187.3 at -18.94 degrees (North through East)
! Clean map  min=-0.0091615  max=0.16375 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0649-4108_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:56:04 2019