! Started logfile: J0648-4734_S_2017_03_23_pus_uvs.log on Mon May 13 09:51:58 2019 obs J0648-4734_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0648-4734_S_2017_03_23_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.359693 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0648-4734 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 9388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-4734_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 617 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 582 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 973 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.756376Jy sigma=0.004067 ! Fit after self-cal, rms=0.674591Jy sigma=0.003625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.252 mas, bmaj=6.534 mas, bpa=-2.873 degrees ! Estimated noise=4359.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1825 Jy ! Component: 100 - total flux cleaned = 0.297033 Jy ! Total flux subtracted in 100 components = 0.297033 Jy ! Clean residual min=-0.035670 max=0.071777 Jy/beam ! Clean residual mean=-0.000840 rms=0.013467 Jy/beam ! Combined flux in latest and established models = 0.297033 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.297033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387198Jy sigma=0.002005 ! Fit after self-cal, rms=0.386970Jy sigma=0.002003 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=10.22 mas, bpa=0.1008 degrees ! Estimated noise=1597.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.212896 Jy ! Component: 100 - total flux cleaned = 0.295473 Jy ! Component: 150 - total flux cleaned = 0.327758 Jy ! Component: 200 - total flux cleaned = 0.340387 Jy ! Total flux subtracted in 200 components = 0.340387 Jy ! Clean residual min=-0.075034 max=0.114789 Jy/beam ! Clean residual mean=-0.001304 rms=0.031015 Jy/beam ! Combined flux in latest and established models = 0.63742 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 62 components and 0.63742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264756Jy sigma=0.001389 ! Fit after self-cal, rms=0.263425Jy sigma=0.001382 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 0.89 ! LA 1.10 MK 1.30 NL 1.00* OV 1.59 ! PT 0.85 SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.86 ! LA 1.06 MK 1.10 NL 1.00* OV 1.59 ! PT 0.82 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.76 ! LA 0.82 MK 1.17 NL 1.00* OV 1.49 ! PT 0.82 SC 1.19 ! ! ! Correcting IF 4. ! A total of 249 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 2.89 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.263425Jy sigma=0.001382 ! Fit after self-cal, rms=0.225357Jy sigma=0.001047 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=10.47 mas, bpa=-0.1077 degrees ! Estimated noise=1699.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830236 Jy ! Component: 100 - total flux cleaned = 0.000930204 Jy ! Component: 150 - total flux cleaned = 0.000931336 Jy ! Component: 200 - total flux cleaned = 0.00102332 Jy ! Total flux subtracted in 200 components = 0.00102332 Jy ! Clean residual min=-0.054012 max=0.070459 Jy/beam ! Clean residual mean=0.000776 rms=0.023135 Jy/beam ! Combined flux in latest and established models = 0.638443 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.638443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225240Jy sigma=0.001047 ! Fit after self-cal, rms=0.227755Jy sigma=0.001043 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227755Jy sigma=0.001043 ! Fit after self-cal, rms=0.230028Jy sigma=0.001033 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=10.47 mas, bpa=-0.08081 degrees ! Estimated noise=1719.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722826 Jy ! Component: 100 - total flux cleaned = 0.00780751 Jy ! Component: 150 - total flux cleaned = 0.00792081 Jy ! Component: 200 - total flux cleaned = 0.0079185 Jy ! Total flux subtracted in 200 components = 0.0079185 Jy ! Clean residual min=-0.052975 max=0.070416 Jy/beam ! Clean residual mean=0.000833 rms=0.022917 Jy/beam ! Combined flux in latest and established models = 0.646362 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.646362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229515Jy sigma=0.001033 ! Fit after self-cal, rms=0.229938Jy sigma=0.001033 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326249 Jy ! Component: 100 - total flux cleaned = 0.000315624 Jy ! Component: 150 - total flux cleaned = 0.000314284 Jy ! Component: 200 - total flux cleaned = 0.00031292 Jy ! Total flux subtracted in 200 components = 0.00031292 Jy ! Clean residual min=-0.052832 max=0.070384 Jy/beam ! Clean residual mean=0.000842 rms=0.022888 Jy/beam ! Combined flux in latest and established models = 0.646675 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.646675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229628Jy sigma=0.001033 ! Fit after self-cal, rms=0.229867Jy sigma=0.001032 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229867Jy sigma=0.001032 ! Fit after self-cal, rms=0.228745Jy sigma=0.001012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=10.45 mas, bpa=-0.5791 degrees ! Estimated noise=1717.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183662 Jy ! Component: 100 - total flux cleaned = 0.00184341 Jy ! Component: 150 - total flux cleaned = 0.00174359 Jy ! Component: 200 - total flux cleaned = 0.0017582 Jy ! Total flux subtracted in 200 components = 0.0017582 Jy ! Clean residual min=-0.050774 max=0.071244 Jy/beam ! Clean residual mean=0.001002 rms=0.021808 Jy/beam ! Combined flux in latest and established models = 0.648433 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.648433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228461Jy sigma=0.001012 ! Fit after self-cal, rms=0.228752Jy sigma=0.001012 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125173 Jy ! Component: 100 - total flux cleaned = 0.000122559 Jy ! Component: 150 - total flux cleaned = 0.000124841 Jy ! Component: 200 - total flux cleaned = 0.000114246 Jy ! Total flux subtracted in 200 components = 0.000114246 Jy ! Clean residual min=-0.050700 max=0.071212 Jy/beam ! Clean residual mean=0.001006 rms=0.021802 Jy/beam ! Combined flux in latest and established models = 0.648547 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.648547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228509Jy sigma=0.001012 ! Fit after self-cal, rms=0.228701Jy sigma=0.001012 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228701Jy sigma=0.001012 ! Fit after self-cal, rms=0.229890Jy sigma=0.001012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.79 mas, bmaj=48.05 mas, bpa=-0.5831 degrees ! Estimated noise=1958.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533101 Jy ! Component: 100 - total flux cleaned = 0.00531768 Jy ! Component: 150 - total flux cleaned = 0.00531341 Jy ! Component: 200 - total flux cleaned = 0.0053113 Jy ! Total flux subtracted in 200 components = 0.0053113 Jy ! Clean residual min=-0.072764 max=0.099794 Jy/beam ! Clean residual mean=0.001646 rms=0.031504 Jy/beam ! Combined flux in latest and established models = 0.653858 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 82 components and 0.653858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229614Jy sigma=0.001012 ! Fit after self-cal, rms=0.229812Jy sigma=0.001012 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144835 Jy ! Component: 100 - total flux cleaned = 0.000146188 Jy ! Component: 150 - total flux cleaned = 0.000145246 Jy ! Component: 200 - total flux cleaned = 0.000143853 Jy ! Total flux subtracted in 200 components = 0.000143853 Jy ! Clean residual min=-0.072725 max=0.099781 Jy/beam ! Clean residual mean=0.001652 rms=0.031488 Jy/beam ! Combined flux in latest and established models = 0.654002 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 82 components and 0.654002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229614Jy sigma=0.001012 ! Fit after self-cal, rms=0.229777Jy sigma=0.001012 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=10.49 mas, bpa=-1.095 degrees ! Estimated noise=1723.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 10.49 at -1.095 degrees (North through East) ! Clean map min=-0.050056 max=0.31423 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=6.545 mas, bpa=-4.061 degrees ! Estimated noise=5116.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213346 Jy ! Component: 100 - total flux cleaned = 0.348658 Jy ! Component: 150 - total flux cleaned = 0.439917 Jy ! Component: 200 - total flux cleaned = 0.502159 Jy ! Total flux subtracted in 200 components = 0.502159 Jy ! Clean residual min=-0.028742 max=0.042426 Jy/beam ! Clean residual mean=-0.000141 rms=0.010070 Jy/beam ! Combined flux in latest and established models = 0.502159 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.502159 Jy ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=10.49 mas, bpa=-1.095 degrees ! Estimated noise=1723.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0923249 Jy ! Component: 100 - total flux cleaned = 0.126173 Jy ! Component: 150 - total flux cleaned = 0.138718 Jy ! Component: 200 - total flux cleaned = 0.14338 Jy ! Total flux subtracted in 200 components = 0.14338 Jy ! Clean residual min=-0.051823 max=0.071465 Jy/beam ! Clean residual mean=0.000940 rms=0.021953 Jy/beam ! Combined flux in latest and established models = 0.64554 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 68 components and 0.64554 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.79 mas, bmaj=48.05 mas, bpa=-0.5831 degrees ! Estimated noise=1958.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628308 Jy ! Component: 100 - total flux cleaned = 0.00677021 Jy ! Component: 150 - total flux cleaned = 0.00677592 Jy ! Component: 200 - total flux cleaned = 0.0067995 Jy ! Total flux subtracted in 200 components = 0.0067995 Jy ! Clean residual min=-0.073073 max=0.099897 Jy/beam ! Clean residual mean=0.001615 rms=0.031562 Jy/beam ! Combined flux in latest and established models = 0.652339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38617e-05 Jy ! Component: 100 - total flux cleaned = 9.66465e-05 Jy ! Component: 150 - total flux cleaned = 0.00010572 Jy ! Component: 200 - total flux cleaned = 0.000196087 Jy ! Total flux subtracted in 200 components = 0.000196087 Jy ! Clean residual min=-0.073027 max=0.099886 Jy/beam ! Clean residual mean=0.001620 rms=0.031555 Jy/beam ! Combined flux in latest and established models = 0.652535 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.652535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=10.49 mas, bpa=-1.095 degrees ! Estimated noise=1723.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00457835 Jy ! Component: 100 - total flux cleaned = -0.00522344 Jy ! Component: 150 - total flux cleaned = -0.00522607 Jy ! Component: 200 - total flux cleaned = -0.00522831 Jy ! Total flux subtracted in 200 components = -0.00522831 Jy ! Clean residual min=-0.051792 max=0.071508 Jy/beam ! Clean residual mean=0.000968 rms=0.021925 Jy/beam ! Combined flux in latest and established models = 0.647307 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.647307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230080Jy sigma=0.001014 ! Fit after self-cal, rms=0.230393Jy sigma=0.001014 wmodel J0648-4734_S_2017_03_23_pus_map.mod ! Writing 76 model components to file: J0648-4734_S_2017_03_23_pus_map.mod wobs J0648-4734_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0648-4734_S_2017_03_23_pus_uvs.fits wwins J0648-4734_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J0648-4734_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299714 Jy ! Component: 100 - total flux cleaned = 0.0459329 Jy ! Component: 150 - total flux cleaned = 0.0591721 Jy ! Component: 200 - total flux cleaned = 0.0698053 Jy ! Component: 250 - total flux cleaned = 0.0789625 Jy ! Component: 300 - total flux cleaned = 0.087505 Jy ! Component: 350 - total flux cleaned = 0.0924619 Jy ! Component: 400 - total flux cleaned = 0.0936386 Jy ! Component: 450 - total flux cleaned = 0.0941846 Jy ! Component: 500 - total flux cleaned = 0.0941965 Jy ! Component: 550 - total flux cleaned = 0.0951987 Jy ! Component: 600 - total flux cleaned = 0.0947082 Jy ! Component: 650 - total flux cleaned = 0.0951645 Jy ! Component: 700 - total flux cleaned = 0.0973968 Jy ! Component: 750 - total flux cleaned = 0.0995371 Jy ! Component: 800 - total flux cleaned = 0.101587 Jy ! Component: 850 - total flux cleaned = 0.103164 Jy ! Component: 900 - total flux cleaned = 0.104687 Jy ! Component: 950 - total flux cleaned = 0.106163 Jy ! Component: 1000 - total flux cleaned = 0.10795 Jy ! Component: 1050 - total flux cleaned = 0.109679 Jy ! Component: 1100 - total flux cleaned = 0.111023 Jy ! Component: 1150 - total flux cleaned = 0.112005 Jy ! Component: 1200 - total flux cleaned = 0.113264 Jy ! Component: 1250 - total flux cleaned = 0.113568 Jy ! Component: 1300 - total flux cleaned = 0.11297 Jy ! Component: 1350 - total flux cleaned = 0.111801 Jy ! Component: 1400 - total flux cleaned = 0.110367 Jy ! Component: 1450 - total flux cleaned = 0.109526 Jy ! Component: 1500 - total flux cleaned = 0.107874 Jy ! Component: 1550 - total flux cleaned = 0.106256 Jy ! Component: 1600 - total flux cleaned = 0.104399 Jy ! Component: 1650 - total flux cleaned = 0.102836 Jy ! Component: 1700 - total flux cleaned = 0.101295 Jy ! Component: 1750 - total flux cleaned = 0.0995294 Jy ! Component: 1800 - total flux cleaned = 0.0982915 Jy ! Component: 1850 - total flux cleaned = 0.0970681 Jy ! Component: 1900 - total flux cleaned = 0.0958655 Jy ! Component: 1950 - total flux cleaned = 0.0944467 Jy ! Component: 2000 - total flux cleaned = 0.0942142 Jy ! Component: 2050 - total flux cleaned = 0.092834 Jy ! Component: 2100 - total flux cleaned = 0.0917033 Jy ! Component: 2150 - total flux cleaned = 0.0903655 Jy ! Component: 2200 - total flux cleaned = 0.0897062 Jy ! Component: 2250 - total flux cleaned = 0.0888344 Jy ! Component: 2300 - total flux cleaned = 0.0877587 Jy ! Component: 2350 - total flux cleaned = 0.0866956 Jy ! Component: 2400 - total flux cleaned = 0.0854339 Jy ! Component: 2450 - total flux cleaned = 0.0843925 Jy ! Component: 2500 - total flux cleaned = 0.0831543 Jy ! Component: 2550 - total flux cleaned = 0.0823357 Jy ! Component: 2600 - total flux cleaned = 0.0809128 Jy ! Component: 2650 - total flux cleaned = 0.0797028 Jy ! Component: 2700 - total flux cleaned = 0.0783008 Jy ! Component: 2750 - total flux cleaned = 0.0773034 Jy ! Component: 2800 - total flux cleaned = 0.0757104 Jy ! Component: 2850 - total flux cleaned = 0.0741205 Jy ! Component: 2900 - total flux cleaned = 0.0729288 Jy ! Component: 2950 - total flux cleaned = 0.0715382 Jy ! Component: 3000 - total flux cleaned = 0.0705454 Jy ! Component: 3050 - total flux cleaned = 0.0691516 Jy ! Component: 3100 - total flux cleaned = 0.0685515 Jy ! Component: 3150 - total flux cleaned = 0.0673501 Jy ! Component: 3200 - total flux cleaned = 0.0665461 Jy ! Component: 3250 - total flux cleaned = 0.0659416 Jy ! Component: 3300 - total flux cleaned = 0.0649302 Jy ! Component: 3350 - total flux cleaned = 0.0641177 Jy ! Component: 3400 - total flux cleaned = 0.0630977 Jy ! Component: 3450 - total flux cleaned = 0.0620733 Jy ! Component: 3500 - total flux cleaned = 0.0610406 Jy ! Component: 3550 - total flux cleaned = 0.0602102 Jy ! Component: 3600 - total flux cleaned = 0.0595827 Jy ! Component: 3650 - total flux cleaned = 0.0585293 Jy ! Component: 3700 - total flux cleaned = 0.0576823 Jy ! Component: 3750 - total flux cleaned = 0.0570418 Jy ! Component: 3800 - total flux cleaned = 0.0559677 Jy ! Component: 3850 - total flux cleaned = 0.0551008 Jy ! Component: 3900 - total flux cleaned = 0.0546638 Jy ! Component: 3950 - total flux cleaned = 0.0533452 Jy ! Component: 4000 - total flux cleaned = 0.0529018 Jy ! Component: 4050 - total flux cleaned = 0.0520102 Jy ! Total flux subtracted in 4096 components = 0.051561 Jy ! Clean residual min=-0.012882 max=0.012380 Jy/beam ! Clean residual mean=-0.000479 rms=0.005274 Jy/beam ! Combined flux in latest and established models = 0.698868 Jy keep ! Adding 639 model components to the UV plane model. ! The established model now contains 715 components and 0.698868 Jy ![Exited script file: muppet] wmap "J0648-4734_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 10.49 at -1.095 degrees (North through East) ! Clean map min=-0.027621 max=0.33087 Jy/beam ! Writing clean map to FITS file: J0648-4734_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.330874 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00602711 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.46472 5.46472 10.9294 21.8589 43.7178 87.4355 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.63 x 10.49 at -1.095 degrees (North through East) ! Clean map min=-0.027621 max=0.33087 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0648-4734_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:52:06 2019