! Started logfile: J0648-3044_X_2017_09_26_pus_uvs.log on Sat May 11 13:35:18 2019
obs J0648-3044_X_2017_09_26_pus_uva.fits
! Reading UV FITS file: J0648-3044_X_2017_09_26_pus_uva.fits
! AN table 1: 103 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.61165 visibilities/baseline/integration-bin.
! Found source: J0648-3044
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 947 lines of history.
! 
! Reading 27216 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0648-3044_X_2017_09_26_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 221 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 200 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 200 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 221 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 232 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 200 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 200 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 200 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 232 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 288 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.512068Jy  sigma=0.003392
! Fit after  self-cal, rms=0.490432Jy  sigma=0.003222
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6983 mas, bmaj=3.145 mas, bpa=-21.26 degrees
! Estimated noise=1244.97 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.364575 Jy
! Component: 100  -  total flux cleaned = 0.471566 Jy
! Total flux subtracted in 100 components = 0.471566 Jy
! Clean residual min=-0.018744 max=0.050781 Jy/beam
! Clean residual mean=0.000070 rms=0.006291 Jy/beam
! Combined flux in latest and established models = 0.471566 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.471566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.189938Jy  sigma=0.001295
! Fit after  self-cal, rms=0.189873Jy  sigma=0.001294
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0605599 Jy
! Component: 100  -  total flux cleaned = 0.100495 Jy
! Total flux subtracted in 100 components = 0.100495 Jy
! Clean residual min=-0.014029 max=0.025457 Jy/beam
! Clean residual mean=0.000041 rms=0.004363 Jy/beam
! Combined flux in latest and established models = 0.572061 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.572061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148725Jy  sigma=0.000955
! Fit after  self-cal, rms=0.148706Jy  sigma=0.000954
! Inverting map 
! Added new window around map position (-1.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0294367 Jy
! Component: 100  -  total flux cleaned = 0.0507507 Jy
! Total flux subtracted in 100 components = 0.0507507 Jy
! Clean residual min=-0.013771 max=0.019431 Jy/beam
! Clean residual mean=0.000020 rms=0.003799 Jy/beam
! Combined flux in latest and established models = 0.622811 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 37 components and 0.622811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.136575Jy  sigma=0.000851
! Fit after  self-cal, rms=0.136552Jy  sigma=0.000850
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.975 mas, bmaj=3.911 mas, bpa=-20.39 degrees
! Estimated noise=654.956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339965 Jy
! Component: 100  -  total flux cleaned = 0.0508486 Jy
! Component: 150  -  total flux cleaned = 0.0605322 Jy
! Component: 200  -  total flux cleaned = 0.0636632 Jy
! Total flux subtracted in 200 components = 0.0636632 Jy
! Clean residual min=-0.013686 max=0.024138 Jy/beam
! Clean residual mean=-0.000082 rms=0.004011 Jy/beam
! Combined flux in latest and established models = 0.686475 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 67 components and 0.686475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.129169Jy  sigma=0.000783
! Fit after  self-cal, rms=0.129075Jy  sigma=0.000782
! Inverting map 
! Added new window around map position (3.2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220625 Jy
! Component: 100  -  total flux cleaned = 0.0328184 Jy
! Component: 150  -  total flux cleaned = 0.0366995 Jy
! Component: 200  -  total flux cleaned = 0.0379803 Jy
! Total flux subtracted in 200 components = 0.0379803 Jy
! Clean residual min=-0.011100 max=0.013093 Jy/beam
! Clean residual mean=-0.000139 rms=0.002910 Jy/beam
! Combined flux in latest and established models = 0.724455 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 104 components and 0.724455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124979Jy  sigma=0.000753
! Fit after  self-cal, rms=0.124557Jy  sigma=0.000749
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.07     KP        0.99     
!   LA        0.99     MK        0.97     NL        0.98     OV        0.98     
!   PT        1.08     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.26     KP        0.98     
!   LA        1.00     MK        0.98     NL        0.99     OV        0.98     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.31     KP        0.98     
!   LA        1.02     MK        0.98     NL        0.96     OV        0.97     
!   PT        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        1.08     KP        0.98     
!   LA        1.02     MK        0.98     NL        0.98     OV        0.97     
!   PT        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00*    HN        1.00*    KP        0.97     
!   LA        1.02     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00*    HN        1.15     KP        0.98     
!   LA        1.02     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.31     KP        0.96     
!   LA        1.03     MK        1.00     NL        0.98     OV        0.98     
!   PT        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        1.35     KP        0.80     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.98     
!   PT        1.01     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.36     KP        0.83     
!   LA        1.03     MK        0.98     NL        0.99     OV        1.08     
!   PT        1.01     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.16     KP        0.87     
!   LA        1.04     MK        0.99     NL        1.00     OV        1.08     
!   PT        1.00     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.00*    KP        0.91     
!   LA        1.04     MK        1.02     NL        1.01     OV        1.07     
!   PT        1.00     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.00*    KP        0.95     
!   LA        1.02     MK        1.04     NL        1.03     OV        1.06     
!   PT        1.03     
! 
! 
! Fit before self-cal, rms=0.124557Jy  sigma=0.000749
! Fit after  self-cal, rms=0.122836Jy  sigma=0.000694
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.981 mas, bmaj=3.96 mas, bpa=-20.71 degrees
! Estimated noise=658.733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0049986 Jy
! Component: 100  -  total flux cleaned = -0.00442727 Jy
! Component: 150  -  total flux cleaned = -0.00340182 Jy
! Component: 200  -  total flux cleaned = -0.00270127 Jy
! Total flux subtracted in 200 components = -0.00270127 Jy
! Clean residual min=-0.007940 max=0.009993 Jy/beam
! Clean residual mean=-0.000046 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 0.721754 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 125 components and 0.721754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121260Jy  sigma=0.000684
! Fit after  self-cal, rms=0.121223Jy  sigma=0.000684
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121223Jy  sigma=0.000684
! Fit after  self-cal, rms=0.117714Jy  sigma=0.000656
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9814 mas, bmaj=3.976 mas, bpa=-20.7 degrees
! Estimated noise=659.407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00249328 Jy
! Component: 100  -  total flux cleaned = -0.00184166 Jy
! Component: 150  -  total flux cleaned = -0.00156059 Jy
! Component: 200  -  total flux cleaned = -0.00116524 Jy
! Total flux subtracted in 200 components = -0.00116524 Jy
! Clean residual min=-0.005678 max=0.006370 Jy/beam
! Clean residual mean=-0.000066 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 0.720589 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 150 components and 0.720589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117177Jy  sigma=0.000653
! Fit after  self-cal, rms=0.117176Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, -16.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455979 Jy
! Component: 100  -  total flux cleaned = 0.00393189 Jy
! Component: 150  -  total flux cleaned = 0.00366798 Jy
! Component: 200  -  total flux cleaned = 0.00330812 Jy
! Total flux subtracted in 200 components = 0.00330812 Jy
! Clean residual min=-0.005128 max=0.004667 Jy/beam
! Clean residual mean=-0.000060 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.723897 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 174 components and 0.723897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116650Jy  sigma=0.000649
! Fit after  self-cal, rms=0.116619Jy  sigma=0.000649
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116619Jy  sigma=0.000649
! Fit after  self-cal, rms=0.121630Jy  sigma=0.000637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.983 mas, bmaj=3.995 mas, bpa=-20.79 degrees
! Estimated noise=659.915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0013538 Jy
! Component: 100  -  total flux cleaned = -0.00103959 Jy
! Component: 150  -  total flux cleaned = -0.000851862 Jy
! Component: 200  -  total flux cleaned = -0.000679591 Jy
! Total flux subtracted in 200 components = -0.000679591 Jy
! Clean residual min=-0.004329 max=0.002848 Jy/beam
! Clean residual mean=-0.000034 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.723217 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 197 components and 0.723217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121447Jy  sigma=0.000636
! Fit after  self-cal, rms=0.121489Jy  sigma=0.000636
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312332 Jy
! Component: 100  -  total flux cleaned = 0.000467734 Jy
! Component: 150  -  total flux cleaned = 0.000541278 Jy
! Component: 200  -  total flux cleaned = 0.000678328 Jy
! Total flux subtracted in 200 components = 0.000678328 Jy
! Clean residual min=-0.003979 max=0.002719 Jy/beam
! Clean residual mean=-0.000035 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.723895 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 211 components and 0.723895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121382Jy  sigma=0.000635
! Fit after  self-cal, rms=0.121381Jy  sigma=0.000635
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121381Jy  sigma=0.000635
! Fit after  self-cal, rms=0.122156Jy  sigma=0.000635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.459 mas, bmaj=6.734 mas, bpa=-5.162 degrees
! Estimated noise=760.595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00079476 Jy
! Component: 100  -  total flux cleaned = -0.00104565 Jy
! Component: 150  -  total flux cleaned = -0.0010016 Jy
! Component: 200  -  total flux cleaned = -0.000929486 Jy
! Total flux subtracted in 200 components = -0.000929486 Jy
! Clean residual min=-0.003372 max=0.002592 Jy/beam
! Clean residual mean=-0.000053 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.722966 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 227 components and 0.722966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122118Jy  sigma=0.000635
! Fit after  self-cal, rms=0.122117Jy  sigma=0.000635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.65492e-05 Jy
! Component: 100  -  total flux cleaned = 0.000177967 Jy
! Component: 150  -  total flux cleaned = 0.000209894 Jy
! Component: 200  -  total flux cleaned = 0.000238891 Jy
! Total flux subtracted in 200 components = 0.000238891 Jy
! Clean residual min=-0.003165 max=0.002531 Jy/beam
! Clean residual mean=-0.000054 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.723205 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 241 components and 0.723205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122099Jy  sigma=0.000634
! Fit after  self-cal, rms=0.122097Jy  sigma=0.000634
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9833 mas, bmaj=3.999 mas, bpa=-20.81 degrees
! Estimated noise=659.478 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9833 x 3.999 at -20.81 degrees (North through East)
! Clean map  min=-0.005371  max=0.51934 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122097Jy  sigma=0.000634
! Fit after  self-cal, rms=0.122188Jy  sigma=0.000572
! Inverting map and beam 
! Estimated beam: bmin=0.9846 mas, bmaj=4.012 mas, bpa=-20.74 degrees
! Estimated noise=659.369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109137 Jy
! Component: 100  -  total flux cleaned = -0.00115941 Jy
! Component: 150  -  total flux cleaned = -0.00116161 Jy
! Component: 200  -  total flux cleaned = -0.00116209 Jy
! Total flux subtracted in 200 components = -0.00116209 Jy
! Clean residual min=-0.003035 max=0.002264 Jy/beam
! Clean residual mean=-0.000022 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.722043 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 253 components and 0.722043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122089Jy  sigma=0.000572
! Fit after  self-cal, rms=0.122090Jy  sigma=0.000572
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001721 Jy
! Component: 100  -  total flux cleaned = 0.000225201 Jy
! Component: 150  -  total flux cleaned = 0.000276782 Jy
! Component: 200  -  total flux cleaned = 0.00027836 Jy
! Total flux subtracted in 200 components = 0.00027836 Jy
! Clean residual min=-0.002916 max=0.002162 Jy/beam
! Clean residual mean=-0.000022 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.722321 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 261 components and 0.722321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122028Jy  sigma=0.000571
! Fit after  self-cal, rms=0.122030Jy  sigma=0.000571
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122030Jy  sigma=0.000571
! Fit after  self-cal, rms=0.122641Jy  sigma=0.000571
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7024 mas, bmaj=3.269 mas, bpa=-22.05 degrees
! Estimated noise=1303.37 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.381091 Jy
! Component: 100  -  total flux cleaned = 0.491286 Jy
! Component: 150  -  total flux cleaned = 0.548986 Jy
! Component: 200  -  total flux cleaned = 0.581854 Jy
! Total flux subtracted in 200 components = 0.581854 Jy
! Clean residual min=-0.006755 max=0.016779 Jy/beam
! Clean residual mean=0.000051 rms=0.002480 Jy/beam
! Combined flux in latest and established models = 0.581854 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.581854 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9852 mas, bmaj=4.016 mas, bpa=-20.75 degrees
! Estimated noise=659.297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0422347 Jy
! Component: 100  -  total flux cleaned = 0.0677366 Jy
! Component: 150  -  total flux cleaned = 0.0845632 Jy
! Component: 200  -  total flux cleaned = 0.0964894 Jy
! Total flux subtracted in 200 components = 0.0964894 Jy
! Clean residual min=-0.004673 max=0.006788 Jy/beam
! Clean residual mean=0.000005 rms=0.002083 Jy/beam
! Combined flux in latest and established models = 0.678343 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 80 components and 0.678343 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=6.751 mas, bpa=-5.163 degrees
! Estimated noise=758.803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012527 Jy
! Component: 100  -  total flux cleaned = 0.020492 Jy
! Component: 150  -  total flux cleaned = 0.0260967 Jy
! Component: 200  -  total flux cleaned = 0.030212 Jy
! Total flux subtracted in 200 components = 0.030212 Jy
! Clean residual min=-0.003146 max=0.003884 Jy/beam
! Clean residual mean=-0.000016 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.708555 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309493 Jy
! Component: 100  -  total flux cleaned = 0.00547652 Jy
! Component: 150  -  total flux cleaned = 0.00732857 Jy
! Component: 200  -  total flux cleaned = 0.00877274 Jy
! Total flux subtracted in 200 components = 0.00877274 Jy
! Clean residual min=-0.002500 max=0.002769 Jy/beam
! Clean residual mean=-0.000027 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.717328 Jy
! Adding 131 model components to the UV plane model.
! The established model now contains 204 components and 0.717327 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9852 mas, bmaj=4.016 mas, bpa=-20.75 degrees
! Estimated noise=659.297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115822 Jy
! Component: 100  -  total flux cleaned = 0.00123206 Jy
! Component: 150  -  total flux cleaned = 0.00129918 Jy
! Component: 200  -  total flux cleaned = 0.00142445 Jy
! Total flux subtracted in 200 components = 0.00142445 Jy
! Clean residual min=-0.002218 max=0.002367 Jy/beam
! Clean residual mean=-0.000015 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.718752 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 219 components and 0.718752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122825Jy  sigma=0.000571
! Fit after  self-cal, rms=0.122760Jy  sigma=0.000571
wmodel J0648-3044_X_2017_09_26_pus_map.mod
! Writing 219 model components to file: J0648-3044_X_2017_09_26_pus_map.mod
wobs J0648-3044_X_2017_09_26_pus_uvs.fits
! Writing UV FITS file: J0648-3044_X_2017_09_26_pus_uvs.fits
wwins J0648-3044_X_2017_09_26_pus_map.win
! wwins: Wrote 4 windows to J0648-3044_X_2017_09_26_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000876747 Jy
! Component: 100  -  total flux cleaned = 0.00130978 Jy
! Component: 150  -  total flux cleaned = 0.00170691 Jy
! Component: 200  -  total flux cleaned = 0.00186166 Jy
! Component: 250  -  total flux cleaned = 0.00201051 Jy
! Component: 300  -  total flux cleaned = 0.00218281 Jy
! Component: 350  -  total flux cleaned = 0.00229486 Jy
! Component: 400  -  total flux cleaned = 0.00251372 Jy
! Component: 450  -  total flux cleaned = 0.00267366 Jy
! Component: 500  -  total flux cleaned = 0.00280462 Jy
! Component: 550  -  total flux cleaned = 0.00293333 Jy
! Component: 600  -  total flux cleaned = 0.00298368 Jy
! Component: 650  -  total flux cleaned = 0.00298357 Jy
! Component: 700  -  total flux cleaned = 0.0029347 Jy
! Component: 750  -  total flux cleaned = 0.002935 Jy
! Component: 800  -  total flux cleaned = 0.00288762 Jy
! Component: 850  -  total flux cleaned = 0.00286479 Jy
! Component: 900  -  total flux cleaned = 0.00288803 Jy
! Component: 950  -  total flux cleaned = 0.00281968 Jy
! Component: 1000  -  total flux cleaned = 0.00281979 Jy
! Component: 1050  -  total flux cleaned = 0.00275296 Jy
! Component: 1100  -  total flux cleaned = 0.00270874 Jy
! Component: 1150  -  total flux cleaned = 0.00264348 Jy
! Component: 1200  -  total flux cleaned = 0.0026221 Jy
! Component: 1250  -  total flux cleaned = 0.00262207 Jy
! Component: 1300  -  total flux cleaned = 0.00255876 Jy
! Component: 1350  -  total flux cleaned = 0.00249617 Jy
! Component: 1400  -  total flux cleaned = 0.0024549 Jy
! Component: 1450  -  total flux cleaned = 0.00241371 Jy
! Component: 1500  -  total flux cleaned = 0.00233245 Jy
! Component: 1550  -  total flux cleaned = 0.00229211 Jy
! Component: 1600  -  total flux cleaned = 0.00221211 Jy
! Component: 1650  -  total flux cleaned = 0.00217273 Jy
! Component: 1700  -  total flux cleaned = 0.00207466 Jy
! Component: 1750  -  total flux cleaned = 0.00203583 Jy
! Component: 1800  -  total flux cleaned = 0.00195873 Jy
! Component: 1850  -  total flux cleaned = 0.00192058 Jy
! Component: 1900  -  total flux cleaned = 0.00176893 Jy
! Component: 1950  -  total flux cleaned = 0.00171246 Jy
! Component: 2000  -  total flux cleaned = 0.00163764 Jy
! Total flux subtracted in 2048 components = 0.00148964 Jy
! Clean residual min=-0.001044 max=0.001156 Jy/beam
! Clean residual mean=-0.000006 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.720242 Jy
keep
! Adding 136 model components to the UV plane model.
! The established model now contains 352 components and 0.720241 Jy
![Exited script file: muppet]
wmap "J0648-3044_X_2017_09_26_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9852 x 4.016 at -20.75 degrees (North through East)
! Clean map  min=-0.0017646  max=0.53913 Jy/beam
! Writing clean map to FITS file: J0648-3044_X_2017_09_26_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.539135 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000386307 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.21496 0.21496 0.429919 0.859839 1.71968 3.43936 6.87871 13.7574 27.5148 55.0297
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.539 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9852 x 4.016 at -20.75 degrees (North through East)
! Clean map  min=-0.0017646  max=0.53913 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0648-3044_X_2017_09_26_pus_uvs.log closed on Sat May 11 13:35:20 2019