! Started logfile: J0648-3044_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:15 2019 obs J0648-3044_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0648-3044_S_2017_10_09_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.378205 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0648-3044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-3044_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.331783Jy sigma=0.001825 ! Fit after self-cal, rms=0.307648Jy sigma=0.001687 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=54.61 mas, bpa=-16.61 degrees ! Estimated noise=5931.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.581431 Jy ! Component: 100 - total flux cleaned = 0.742578 Jy ! Total flux subtracted in 100 components = 0.742578 Jy ! Clean residual min=-0.050288 max=0.071957 Jy/beam ! Clean residual mean=0.000479 rms=0.020798 Jy/beam ! Combined flux in latest and established models = 0.742578 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.742578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214913Jy sigma=0.001225 ! Fit after self-cal, rms=0.214735Jy sigma=0.001224 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.223 mas, bmaj=52.83 mas, bpa=-17.21 degrees ! Estimated noise=5005.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1083 Jy ! Component: 100 - total flux cleaned = 0.163059 Jy ! Component: 150 - total flux cleaned = 0.17756 Jy ! Component: 200 - total flux cleaned = 0.183594 Jy ! Total flux subtracted in 200 components = 0.183594 Jy ! Clean residual min=-0.017910 max=0.017804 Jy/beam ! Clean residual mean=0.000176 rms=0.006947 Jy/beam ! Combined flux in latest and established models = 0.926173 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 109 components and 0.926173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151150Jy sigma=0.000820 ! Fit after self-cal, rms=0.151169Jy sigma=0.000820 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 1.08 ! LA 1.04 MK 1.00* NL 0.91 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.07 KP 1.04 ! LA 1.01 MK 1.00* NL 1.01 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 0.91 ! LA 0.79 MK 1.00* NL 1.11 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.151169Jy sigma=0.000820 ! Fit after self-cal, rms=0.113873Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.425 mas, bmaj=52.5 mas, bpa=-17.44 degrees ! Estimated noise=5098.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013299 Jy ! Component: 100 - total flux cleaned = -0.00102698 Jy ! Component: 150 - total flux cleaned = -0.00176827 Jy ! Component: 200 - total flux cleaned = -0.00268002 Jy ! Total flux subtracted in 200 components = -0.00268002 Jy ! Clean residual min=-0.003640 max=0.003656 Jy/beam ! Clean residual mean=0.000011 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.923493 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 153 components and 0.923493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112562Jy sigma=0.000640 ! Fit after self-cal, rms=0.112526Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112526Jy sigma=0.000640 ! Fit after self-cal, rms=0.112504Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.426 mas, bmaj=52.5 mas, bpa=-17.44 degrees ! Estimated noise=5097.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.40168e-05 Jy ! Component: 100 - total flux cleaned = 0.00109426 Jy ! Component: 150 - total flux cleaned = 0.0020928 Jy ! Component: 200 - total flux cleaned = 0.00233807 Jy ! Total flux subtracted in 200 components = 0.00233807 Jy ! Clean residual min=-0.002053 max=0.002072 Jy/beam ! Clean residual mean=0.000001 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.925831 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 201 components and 0.925831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112079Jy sigma=0.000637 ! Fit after self-cal, rms=0.112086Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000431216 Jy ! Component: 100 - total flux cleaned = 0.000120665 Jy ! Component: 150 - total flux cleaned = 0.0010377 Jy ! Component: 200 - total flux cleaned = 0.00196713 Jy ! Total flux subtracted in 200 components = 0.00196713 Jy ! Clean residual min=-0.001502 max=0.001479 Jy/beam ! Clean residual mean=0.000001 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.927798 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 253 components and 0.927798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111895Jy sigma=0.000636 ! Fit after self-cal, rms=0.111897Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111897Jy sigma=0.000636 ! Fit after self-cal, rms=0.111817Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.425 mas, bmaj=52.5 mas, bpa=-17.44 degrees ! Estimated noise=5094.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190789 Jy ! Component: 100 - total flux cleaned = -1.7674e-05 Jy ! Component: 150 - total flux cleaned = 0.00021788 Jy ! Component: 200 - total flux cleaned = 0.00036306 Jy ! Total flux subtracted in 200 components = 0.00036306 Jy ! Clean residual min=-0.001179 max=0.001184 Jy/beam ! Clean residual mean=-0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.928161 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 310 components and 0.928162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111703Jy sigma=0.000635 ! Fit after self-cal, rms=0.111705Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.34028e-05 Jy ! Component: 100 - total flux cleaned = 0.000530277 Jy ! Component: 150 - total flux cleaned = 0.000650895 Jy ! Component: 200 - total flux cleaned = 0.000828193 Jy ! Total flux subtracted in 200 components = 0.000828193 Jy ! Clean residual min=-0.000954 max=0.000957 Jy/beam ! Clean residual mean=0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.92899 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 363 components and 0.92899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111636Jy sigma=0.000635 ! Fit after self-cal, rms=0.111638Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111638Jy sigma=0.000635 ! Fit after self-cal, rms=0.111614Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.129 mas, bmaj=56.18 mas, bpa=-19.69 degrees ! Estimated noise=5325.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200308 Jy ! Component: 100 - total flux cleaned = -0.000252018 Jy ! Component: 150 - total flux cleaned = -0.000202047 Jy ! Component: 200 - total flux cleaned = -7.48472e-06 Jy ! Total flux subtracted in 200 components = -7.48472e-06 Jy ! Clean residual min=-0.000809 max=0.000816 Jy/beam ! Clean residual mean=-0.000007 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.928982 Jy selfcal ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 439 components and 0.928982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111577Jy sigma=0.000635 ! Fit after self-cal, rms=0.111579Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109563 Jy ! Component: 100 - total flux cleaned = 0.000112445 Jy ! Component: 150 - total flux cleaned = 0.000199571 Jy ! Component: 200 - total flux cleaned = 7.23661e-05 Jy ! Total flux subtracted in 200 components = 7.23661e-05 Jy ! Clean residual min=-0.000694 max=0.000691 Jy/beam ! Clean residual mean=-0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.929055 Jy ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 525 components and 0.929054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111551Jy sigma=0.000634 ! Fit after self-cal, rms=0.111552Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.424 mas, bmaj=52.5 mas, bpa=-17.44 degrees ! Estimated noise=5094.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.424 x 52.5 at -17.44 degrees (North through East) ! Clean map min=-0.009121 max=0.73576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111552Jy sigma=0.000634 ! Fit after self-cal, rms=0.099129Jy sigma=0.000545 ! Inverting map and beam ! Estimated beam: bmin=5.423 mas, bmaj=52.49 mas, bpa=-17.44 degrees ! Estimated noise=5093.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.96218e-05 Jy ! Component: 100 - total flux cleaned = 0.000216089 Jy ! Component: 150 - total flux cleaned = 0.000325393 Jy ! Component: 200 - total flux cleaned = 0.000276419 Jy ! Total flux subtracted in 200 components = 0.000276419 Jy ! Clean residual min=-0.000807 max=0.000793 Jy/beam ! Clean residual mean=-0.000003 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.929331 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 588 components and 0.929331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099071Jy sigma=0.000545 ! Fit after self-cal, rms=0.099073Jy sigma=0.000545 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372303 Jy ! Component: 100 - total flux cleaned = -0.000374099 Jy ! Component: 150 - total flux cleaned = -0.00046612 Jy ! Component: 200 - total flux cleaned = -0.000602195 Jy ! Total flux subtracted in 200 components = -0.000602195 Jy ! Clean residual min=-0.000747 max=0.000744 Jy/beam ! Clean residual mean=-0.000003 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.928729 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 633 components and 0.928729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099032Jy sigma=0.000545 ! Fit after self-cal, rms=0.099035Jy sigma=0.000545 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099035Jy sigma=0.000545 ! Fit after self-cal, rms=0.099041Jy sigma=0.000545 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.548 mas, bmaj=53.24 mas, bpa=-16.83 degrees ! Estimated noise=5906.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.588388 Jy ! Component: 100 - total flux cleaned = 0.744978 Jy ! Component: 150 - total flux cleaned = 0.821267 Jy ! Component: 200 - total flux cleaned = 0.868755 Jy ! Total flux subtracted in 200 components = 0.868755 Jy ! Clean residual min=-0.020420 max=0.025192 Jy/beam ! Clean residual mean=0.000216 rms=0.008111 Jy/beam ! Combined flux in latest and established models = 0.868755 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.868755 Jy ! Inverting map and beam ! Estimated beam: bmin=5.423 mas, bmaj=52.49 mas, bpa=-17.44 degrees ! Estimated noise=5094.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355927 Jy ! Component: 100 - total flux cleaned = 0.040828 Jy ! Component: 150 - total flux cleaned = 0.0394258 Jy ! Component: 200 - total flux cleaned = 0.0375583 Jy ! Total flux subtracted in 200 components = 0.0375583 Jy ! Clean residual min=-0.006937 max=0.006899 Jy/beam ! Clean residual mean=0.000033 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 0.906313 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 144 components and 0.906313 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.128 mas, bmaj=56.15 mas, bpa=-19.68 degrees ! Estimated noise=5326.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474258 Jy ! Component: 100 - total flux cleaned = 0.006338 Jy ! Component: 150 - total flux cleaned = 0.0103918 Jy ! Component: 200 - total flux cleaned = 0.0133443 Jy ! Total flux subtracted in 200 components = 0.0133443 Jy ! Clean residual min=-0.003057 max=0.003065 Jy/beam ! Clean residual mean=0.000036 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.919658 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212235 Jy ! Component: 100 - total flux cleaned = 0.00317546 Jy ! Component: 150 - total flux cleaned = 0.00446004 Jy ! Component: 200 - total flux cleaned = 0.00525093 Jy ! Total flux subtracted in 200 components = 0.00525093 Jy ! Clean residual min=-0.003385 max=0.003442 Jy/beam ! Clean residual mean=0.000052 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.924909 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 251 components and 0.924908 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.423 mas, bmaj=52.49 mas, bpa=-17.44 degrees ! Estimated noise=5094.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183321 Jy ! Component: 100 - total flux cleaned = -0.00373051 Jy ! Component: 150 - total flux cleaned = -0.00450797 Jy ! Component: 200 - total flux cleaned = -0.00536412 Jy ! Total flux subtracted in 200 components = -0.00536412 Jy ! Clean residual min=-0.002280 max=0.002281 Jy/beam ! Clean residual mean=-0.000007 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.919544 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 307 components and 0.919544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099877Jy sigma=0.000550 ! Fit after self-cal, rms=0.099837Jy sigma=0.000549 wmodel J0648-3044_S_2017_10_09_pus_map.mod ! Writing 307 model components to file: J0648-3044_S_2017_10_09_pus_map.mod wobs J0648-3044_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0648-3044_S_2017_10_09_pus_uvs.fits wwins J0648-3044_S_2017_10_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0648-3044_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.423 x 52.49 at -17.44 degrees (North through East) ! Clean map min=-0.0061508 max=0.72949 Jy/beam ! Writing clean map to FITS file: J0648-3044_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.729491 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000797131 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.327817 0.327817 0.655633 1.31127 2.62253 5.24506 10.4901 20.9803 41.9605 83.921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.729 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.423 x 52.49 at -17.44 degrees (North through East) ! Clean map min=-0.0061508 max=0.72949 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0648-3044_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:06:20 2019