! Started logfile: J0648-3044_S_2017_06_10_pus_uvs.log on Mon May 6 14:46:55 2019 obs J0648-3044_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0648-3044_S_2017_06_10_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.567521 visibilities/baseline/integration-bin. ! Found source: J0648-3044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-3044_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.450503Jy sigma=0.002912 ! Fit after self-cal, rms=0.306523Jy sigma=0.001942 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=14.45 mas, bpa=0.08494 degrees ! Estimated noise=4902.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.559466 Jy ! Component: 100 - total flux cleaned = 0.702606 Jy ! Total flux subtracted in 100 components = 0.702606 Jy ! Clean residual min=-0.034713 max=0.080749 Jy/beam ! Clean residual mean=0.000520 rms=0.015242 Jy/beam ! Combined flux in latest and established models = 0.702606 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.702606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174217Jy sigma=0.001139 ! Fit after self-cal, rms=0.174073Jy sigma=0.001138 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=16.06 mas, bpa=2.031 degrees ! Estimated noise=3315.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0953852 Jy ! Component: 100 - total flux cleaned = 0.141251 Jy ! Component: 150 - total flux cleaned = 0.16481 Jy ! Component: 200 - total flux cleaned = 0.177253 Jy ! Total flux subtracted in 200 components = 0.177253 Jy ! Clean residual min=-0.016330 max=0.018164 Jy/beam ! Clean residual mean=0.000018 rms=0.004905 Jy/beam ! Combined flux in latest and established models = 0.879858 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 48 components and 0.879859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121346Jy sigma=0.000742 ! Fit after self-cal, rms=0.121120Jy sigma=0.000741 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.03 KP 1.01 ! LA 1.00 MK 1.00* NL 0.88 OV 0.97 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.11 KP 0.97 ! LA 0.94 MK 1.00* NL 1.09 OV 1.02 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.07 KP 0.97 ! LA 0.95 MK 1.00* NL 1.04 OV 0.92 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.08 KP 1.00* ! LA 0.93 MK 1.00* NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.121120Jy sigma=0.000741 ! Fit after self-cal, rms=0.107576Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=16.2 mas, bpa=2.287 degrees ! Estimated noise=3317.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00753692 Jy ! Component: 100 - total flux cleaned = -0.00855959 Jy ! Component: 150 - total flux cleaned = -0.00856517 Jy ! Component: 200 - total flux cleaned = -0.00856413 Jy ! Total flux subtracted in 200 components = -0.00856413 Jy ! Clean residual min=-0.010507 max=0.009558 Jy/beam ! Clean residual mean=0.000020 rms=0.002856 Jy/beam ! Combined flux in latest and established models = 0.871294 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.871294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106776Jy sigma=0.000652 ! Fit after self-cal, rms=0.106742Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106742Jy sigma=0.000652 ! Fit after self-cal, rms=0.106822Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=16.26 mas, bpa=2.344 degrees ! Estimated noise=3314.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0055241 Jy ! Component: 100 - total flux cleaned = -0.00651695 Jy ! Component: 150 - total flux cleaned = -0.00652109 Jy ! Component: 200 - total flux cleaned = -0.00643247 Jy ! Total flux subtracted in 200 components = -0.00643247 Jy ! Clean residual min=-0.009310 max=0.009107 Jy/beam ! Clean residual mean=0.000017 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 0.864862 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.864862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106367Jy sigma=0.000649 ! Fit after self-cal, rms=0.106359Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198053 Jy ! Component: 100 - total flux cleaned = 0.000282187 Jy ! Component: 150 - total flux cleaned = 0.000282238 Jy ! Component: 200 - total flux cleaned = 0.000282028 Jy ! Total flux subtracted in 200 components = 0.000282028 Jy ! Clean residual min=-0.008960 max=0.009102 Jy/beam ! Clean residual mean=0.000017 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 0.865144 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.865144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106215Jy sigma=0.000649 ! Fit after self-cal, rms=0.106206Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106206Jy sigma=0.000649 ! Fit after self-cal, rms=0.106376Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=16.31 mas, bpa=2.395 degrees ! Estimated noise=3312.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00406558 Jy ! Component: 100 - total flux cleaned = -0.00470115 Jy ! Component: 150 - total flux cleaned = -0.0048506 Jy ! Component: 200 - total flux cleaned = -0.00491751 Jy ! Total flux subtracted in 200 components = -0.00491751 Jy ! Clean residual min=-0.008243 max=0.008754 Jy/beam ! Clean residual mean=0.000015 rms=0.002475 Jy/beam ! Combined flux in latest and established models = 0.860227 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.860227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106124Jy sigma=0.000647 ! Fit after self-cal, rms=0.106128Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.9862e-05 Jy ! Component: 100 - total flux cleaned = -5.79766e-08 Jy ! Component: 150 - total flux cleaned = 6.01396e-05 Jy ! Component: 200 - total flux cleaned = 5.8431e-05 Jy ! Total flux subtracted in 200 components = 5.8431e-05 Jy ! Clean residual min=-0.008162 max=0.008792 Jy/beam ! Clean residual mean=0.000015 rms=0.002452 Jy/beam ! Combined flux in latest and established models = 0.860285 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.860285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106049Jy sigma=0.000647 ! Fit after self-cal, rms=0.106047Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106047Jy sigma=0.000647 ! Fit after self-cal, rms=0.106215Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.995 mas, bmaj=23.12 mas, bpa=-6.98 degrees ! Estimated noise=3850.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197515 Jy ! Component: 100 - total flux cleaned = -0.00213867 Jy ! Component: 150 - total flux cleaned = -0.00221749 Jy ! Component: 200 - total flux cleaned = -0.00235371 Jy ! Total flux subtracted in 200 components = -0.00235371 Jy ! Clean residual min=-0.007883 max=0.008452 Jy/beam ! Clean residual mean=0.000017 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.857931 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 85 components and 0.857931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106081Jy sigma=0.000646 ! Fit after self-cal, rms=0.106084Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50668e-05 Jy ! Component: 100 - total flux cleaned = -0.000110826 Jy ! Component: 150 - total flux cleaned = -0.000231047 Jy ! Component: 200 - total flux cleaned = -0.000336707 Jy ! Total flux subtracted in 200 components = -0.000336707 Jy ! Clean residual min=-0.007541 max=0.008406 Jy/beam ! Clean residual mean=0.000018 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 0.857595 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 86 components and 0.857595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106041Jy sigma=0.000646 ! Fit after self-cal, rms=0.106036Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=16.34 mas, bpa=2.434 degrees ! Estimated noise=3310.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 16.34 at 2.434 degrees (North through East) ! Clean map min=-0.0076277 max=0.74146 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106036Jy sigma=0.000646 ! Fit after self-cal, rms=0.099058Jy sigma=0.000590 ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=16.36 mas, bpa=2.436 degrees ! Estimated noise=3309.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257295 Jy ! Component: 100 - total flux cleaned = -0.00296083 Jy ! Component: 150 - total flux cleaned = -0.00322741 Jy ! Component: 200 - total flux cleaned = -0.0033201 Jy ! Total flux subtracted in 200 components = -0.0033201 Jy ! Clean residual min=-0.007599 max=0.008713 Jy/beam ! Clean residual mean=0.000012 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.854274 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.854274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098936Jy sigma=0.000589 ! Fit after self-cal, rms=0.098931Jy sigma=0.000589 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20767e-07 Jy ! Component: 100 - total flux cleaned = 4.23458e-05 Jy ! Component: 150 - total flux cleaned = 8.21508e-05 Jy ! Component: 200 - total flux cleaned = 0.000121488 Jy ! Total flux subtracted in 200 components = 0.000121488 Jy ! Clean residual min=-0.007494 max=0.008702 Jy/beam ! Clean residual mean=0.000012 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.854396 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.854396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098899Jy sigma=0.000589 ! Fit after self-cal, rms=0.098896Jy sigma=0.000589 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098896Jy sigma=0.000589 ! Fit after self-cal, rms=0.099079Jy sigma=0.000589 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=14.66 mas, bpa=0.6218 degrees ! Estimated noise=4923.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.561416 Jy ! Component: 100 - total flux cleaned = 0.700753 Jy ! Component: 150 - total flux cleaned = 0.769457 Jy ! Component: 200 - total flux cleaned = 0.807849 Jy ! Total flux subtracted in 200 components = 0.807849 Jy ! Clean residual min=-0.013002 max=0.024758 Jy/beam ! Clean residual mean=0.000138 rms=0.005095 Jy/beam ! Combined flux in latest and established models = 0.807849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.807849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=16.39 mas, bpa=2.466 degrees ! Estimated noise=3308.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-61, 110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269287 Jy ! Component: 100 - total flux cleaned = 0.0387918 Jy ! Component: 150 - total flux cleaned = 0.0448212 Jy ! Component: 200 - total flux cleaned = 0.0462678 Jy ! Total flux subtracted in 200 components = 0.0462678 Jy ! Clean residual min=-0.008123 max=0.008987 Jy/beam ! Clean residual mean=0.000011 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.854117 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.854117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.014 mas, bmaj=23.2 mas, bpa=-6.961 degrees ! Estimated noise=3842.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020394 Jy ! Component: 100 - total flux cleaned = 0.00178952 Jy ! Component: 150 - total flux cleaned = 0.00166611 Jy ! Component: 200 - total flux cleaned = 0.00167496 Jy ! Total flux subtracted in 200 components = 0.00167496 Jy ! Clean residual min=-0.006926 max=0.008409 Jy/beam ! Clean residual mean=0.000018 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.855792 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85601e-06 Jy ! Component: 100 - total flux cleaned = -8.51713e-06 Jy ! Component: 150 - total flux cleaned = -8.71026e-05 Jy ! Component: 200 - total flux cleaned = -8.64897e-05 Jy ! Total flux subtracted in 200 components = -8.64897e-05 Jy ! Clean residual min=-0.006551 max=0.008091 Jy/beam ! Clean residual mean=0.000025 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.855705 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.855705 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=16.39 mas, bpa=2.466 degrees ! Estimated noise=3308.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.92006e-05 Jy ! Component: 100 - total flux cleaned = 7.62642e-05 Jy ! Component: 150 - total flux cleaned = 7.28762e-05 Jy ! Component: 200 - total flux cleaned = 7.29622e-05 Jy ! Total flux subtracted in 200 components = 7.29622e-05 Jy ! Clean residual min=-0.006448 max=0.008448 Jy/beam ! Clean residual mean=0.000008 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.855778 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.855778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098412Jy sigma=0.000586 ! Fit after self-cal, rms=0.098268Jy sigma=0.000585 wmodel J0648-3044_S_2017_06_10_pus_map.mod ! Writing 96 model components to file: J0648-3044_S_2017_06_10_pus_map.mod wobs J0648-3044_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0648-3044_S_2017_06_10_pus_uvs.fits wwins J0648-3044_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0648-3044_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359374 Jy ! Component: 100 - total flux cleaned = 0.00580355 Jy ! Component: 150 - total flux cleaned = 0.00716096 Jy ! Component: 200 - total flux cleaned = 0.00735467 Jy ! Component: 250 - total flux cleaned = 0.00726506 Jy ! Component: 300 - total flux cleaned = 0.00718206 Jy ! Component: 350 - total flux cleaned = 0.00702479 Jy ! Component: 400 - total flux cleaned = 0.00672948 Jy ! Component: 450 - total flux cleaned = 0.00624536 Jy ! Component: 500 - total flux cleaned = 0.00631084 Jy ! Component: 550 - total flux cleaned = 0.00637439 Jy ! Component: 600 - total flux cleaned = 0.00655399 Jy ! Component: 650 - total flux cleaned = 0.00684223 Jy ! Component: 700 - total flux cleaned = 0.00717669 Jy ! Component: 750 - total flux cleaned = 0.00750042 Jy ! Component: 800 - total flux cleaned = 0.0079142 Jy ! Component: 850 - total flux cleaned = 0.00816325 Jy ! Component: 900 - total flux cleaned = 0.00850104 Jy ! Component: 950 - total flux cleaned = 0.00878145 Jy ! Component: 1000 - total flux cleaned = 0.0088268 Jy ! Component: 1050 - total flux cleaned = 0.00900418 Jy ! Component: 1100 - total flux cleaned = 0.00913497 Jy ! Component: 1150 - total flux cleaned = 0.00938665 Jy ! Component: 1200 - total flux cleaned = 0.00975402 Jy ! Component: 1250 - total flux cleaned = 0.0102328 Jy ! Component: 1300 - total flux cleaned = 0.0106239 Jy ! Component: 1350 - total flux cleaned = 0.0110456 Jy ! Component: 1400 - total flux cleaned = 0.011383 Jy ! Component: 1450 - total flux cleaned = 0.0117139 Jy ! Component: 1500 - total flux cleaned = 0.0120391 Jy ! Component: 1550 - total flux cleaned = 0.0122869 Jy ! Component: 1600 - total flux cleaned = 0.0124273 Jy ! Component: 1650 - total flux cleaned = 0.0125669 Jy ! Component: 1700 - total flux cleaned = 0.012741 Jy ! Component: 1750 - total flux cleaned = 0.0129853 Jy ! Component: 1800 - total flux cleaned = 0.0131251 Jy ! Component: 1850 - total flux cleaned = 0.0133008 Jy ! Component: 1900 - total flux cleaned = 0.0135127 Jy ! Component: 1950 - total flux cleaned = 0.0136198 Jy ! Component: 2000 - total flux cleaned = 0.0137632 Jy ! Component: 2050 - total flux cleaned = 0.0139083 Jy ! Component: 2100 - total flux cleaned = 0.0140188 Jy ! Component: 2150 - total flux cleaned = 0.0141673 Jy ! Component: 2200 - total flux cleaned = 0.0143201 Jy ! Component: 2250 - total flux cleaned = 0.014438 Jy ! Component: 2300 - total flux cleaned = 0.0145189 Jy ! Component: 2350 - total flux cleaned = 0.0146458 Jy ! Component: 2400 - total flux cleaned = 0.014733 Jy ! Component: 2450 - total flux cleaned = 0.0148684 Jy ! Component: 2500 - total flux cleaned = 0.0150091 Jy ! Component: 2550 - total flux cleaned = 0.0151066 Jy ! Component: 2600 - total flux cleaned = 0.0152574 Jy ! Component: 2650 - total flux cleaned = 0.0154148 Jy ! Component: 2700 - total flux cleaned = 0.0154695 Jy ! Component: 2750 - total flux cleaned = 0.0155257 Jy ! Component: 2800 - total flux cleaned = 0.0155846 Jy ! Component: 2850 - total flux cleaned = 0.015709 Jy ! Component: 2900 - total flux cleaned = 0.015775 Jy ! Component: 2950 - total flux cleaned = 0.0159121 Jy ! Component: 3000 - total flux cleaned = 0.0159848 Jy ! Component: 3050 - total flux cleaned = 0.0160583 Jy ! Component: 3100 - total flux cleaned = 0.0161355 Jy ! Component: 3150 - total flux cleaned = 0.0162152 Jy ! Component: 3200 - total flux cleaned = 0.0163846 Jy ! Component: 3250 - total flux cleaned = 0.0164719 Jy ! Component: 3300 - total flux cleaned = 0.0165621 Jy ! Component: 3350 - total flux cleaned = 0.016754 Jy ! Component: 3400 - total flux cleaned = 0.0168574 Jy ! Component: 3450 - total flux cleaned = 0.0169638 Jy ! Component: 3500 - total flux cleaned = 0.0171845 Jy ! Component: 3550 - total flux cleaned = 0.017301 Jy ! Component: 3600 - total flux cleaned = 0.0174231 Jy ! Component: 3650 - total flux cleaned = 0.017677 Jy ! Component: 3700 - total flux cleaned = 0.0178104 Jy ! Component: 3750 - total flux cleaned = 0.0179469 Jy ! Component: 3800 - total flux cleaned = 0.0182356 Jy ! Component: 3850 - total flux cleaned = 0.0183857 Jy ! Component: 3900 - total flux cleaned = 0.0185411 Jy ! Component: 3950 - total flux cleaned = 0.0188727 Jy ! Component: 4000 - total flux cleaned = 0.0190474 Jy ! Component: 4050 - total flux cleaned = 0.0194114 Jy ! Total flux subtracted in 4096 components = 0.019602 Jy ! Clean residual min=-0.010341 max=0.010264 Jy/beam ! Clean residual mean=0.000108 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 0.87538 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 316 components and 0.875381 Jy ![Exited script file: muppet] wmap "J0648-3044_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 16.39 at 2.466 degrees (North through East) ! Clean map min=-0.01901 max=0.73467 Jy/beam ! Writing clean map to FITS file: J0648-3044_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.734667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00255303 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04252 1.04252 2.08505 4.1701 8.3402 16.6804 33.3608 66.7216 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0076 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.734 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 16.39 at 2.466 degrees (North through East) ! Clean map min=-0.01901 max=0.73467 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0648-3044_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:47:01 2019