! Started logfile: J0648-3044_S_2017_02_24_pus_uvs.log on Sat May 4 11:20:25 2019 obs J0648-3044_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0648-3044_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780556 visibilities/baseline/integration-bin. ! Found source: J0648-3044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-3044_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.424218Jy sigma=0.029110 ! Fit after self-cal, rms=0.417541Jy sigma=0.028532 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.819 mas, bpa=-8.304 degrees ! Estimated noise=2098.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303578 Jy ! Component: 100 - total flux cleaned = 0.35545 Jy ! Total flux subtracted in 100 components = 0.35545 Jy ! Clean residual min=-0.122251 max=0.134426 Jy/beam ! Clean residual mean=0.002295 rms=0.048222 Jy/beam ! Combined flux in latest and established models = 0.35545 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.35545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378392Jy sigma=0.009973 ! Fit after self-cal, rms=0.378349Jy sigma=0.009973 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=9.43 mas, bpa=-6.968 degrees ! Estimated noise=1632.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042486 Jy ! Component: 100 - total flux cleaned = 0.0436883 Jy ! Component: 150 - total flux cleaned = 0.0447257 Jy ! Component: 200 - total flux cleaned = 0.0446765 Jy ! Total flux subtracted in 200 components = 0.0446765 Jy ! Clean residual min=-0.121023 max=0.143479 Jy/beam ! Clean residual mean=0.005338 rms=0.044586 Jy/beam ! Combined flux in latest and established models = 0.400126 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.400126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340334Jy sigma=0.011051 ! Fit after self-cal, rms=0.340165Jy sigma=0.011050 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.76 HN 1.11 KP 0.72 ! LA 0.69 MK 0.95 NL 0.79 OV 0.76 ! PT 0.74 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.69 HN 1.10 KP 0.68 ! LA 0.66 MK 0.96 NL 0.77 OV 0.80 ! PT 0.72 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.72 HN 1.03 KP 0.74 ! LA 0.73 MK 0.95 NL 0.87 OV 0.71 ! PT 0.72 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.74 HN 1.05 KP 1.00* ! LA 28.93 MK 1.08 NL 1.00* OV 0.76 ! PT 0.74 SC 1.00* ! ! ! Fit before self-cal, rms=0.340165Jy sigma=0.011050 ! Fit after self-cal, rms=2.242999Jy sigma=0.001024 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=8.541 mas, bpa=-4.809 degrees ! Estimated noise=1635.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019668 Jy ! Component: 100 - total flux cleaned = 0.0215494 Jy ! Component: 150 - total flux cleaned = 0.0221886 Jy ! Component: 200 - total flux cleaned = 0.0224653 Jy ! Total flux subtracted in 200 components = 0.0224653 Jy ! Clean residual min=-0.011922 max=0.014458 Jy/beam ! Clean residual mean=0.000096 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 0.422592 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.422592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.241598Jy sigma=0.001006 ! Fit after self-cal, rms=2.241721Jy sigma=0.000994 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.241721Jy sigma=0.000994 ! Fit after self-cal, rms=2.382553Jy sigma=0.000947 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=8.436 mas, bpa=-4.58 degrees ! Estimated noise=1650.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146653 Jy ! Component: 100 - total flux cleaned = 0.0209198 Jy ! Component: 150 - total flux cleaned = 0.0223644 Jy ! Component: 200 - total flux cleaned = 0.0226868 Jy ! Total flux subtracted in 200 components = 0.0226868 Jy ! Clean residual min=-0.010584 max=0.011768 Jy/beam ! Clean residual mean=0.000073 rms=0.002981 Jy/beam ! Combined flux in latest and established models = 0.445278 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 0.445278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.380581Jy sigma=0.000945 ! Fit after self-cal, rms=2.380618Jy sigma=0.000944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110072 Jy ! Component: 100 - total flux cleaned = 0.00156056 Jy ! Component: 150 - total flux cleaned = 0.00155891 Jy ! Component: 200 - total flux cleaned = 0.00155487 Jy ! Total flux subtracted in 200 components = 0.00155487 Jy ! Clean residual min=-0.010395 max=0.011406 Jy/beam ! Clean residual mean=0.000076 rms=0.002932 Jy/beam ! Combined flux in latest and established models = 0.446833 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.446833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.380469Jy sigma=0.000942 ! Fit after self-cal, rms=2.380479Jy sigma=0.000941 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.380479Jy sigma=0.000941 ! Fit after self-cal, rms=0.081875Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.373 mas, bpa=-4.688 degrees ! Estimated noise=1641.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283746 Jy ! Component: 100 - total flux cleaned = 0.00230721 Jy ! Component: 150 - total flux cleaned = 0.00174425 Jy ! Component: 200 - total flux cleaned = 0.00144365 Jy ! Total flux subtracted in 200 components = 0.00144365 Jy ! Clean residual min=-0.005512 max=0.005670 Jy/beam ! Clean residual mean=0.000018 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.448277 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.448277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081238Jy sigma=0.000681 ! Fit after self-cal, rms=0.081192Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38.5, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244483 Jy ! Component: 100 - total flux cleaned = 0.00189639 Jy ! Component: 150 - total flux cleaned = 0.00166117 Jy ! Component: 200 - total flux cleaned = 0.00145009 Jy ! Total flux subtracted in 200 components = 0.00145009 Jy ! Clean residual min=-0.005061 max=0.004758 Jy/beam ! Clean residual mean=0.000017 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.449727 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.449727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080585Jy sigma=0.000676 ! Fit after self-cal, rms=0.080562Jy sigma=0.000676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080562Jy sigma=0.000676 ! Fit after self-cal, rms=0.079653Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.951 mas, bmaj=22.13 mas, bpa=0.6709 degrees ! Estimated noise=1875.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810638 Jy ! Component: 100 - total flux cleaned = 0.000537208 Jy ! Component: 150 - total flux cleaned = 0.000284764 Jy ! Component: 200 - total flux cleaned = 5.09638e-05 Jy ! Total flux subtracted in 200 components = 5.09638e-05 Jy ! Clean residual min=-0.004914 max=0.004638 Jy/beam ! Clean residual mean=0.000029 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.449778 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.449778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079532Jy sigma=0.000675 ! Fit after self-cal, rms=0.079515Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32676e-05 Jy ! Component: 100 - total flux cleaned = -0.000256734 Jy ! Component: 150 - total flux cleaned = -0.0004075 Jy ! Component: 200 - total flux cleaned = -0.000551283 Jy ! Total flux subtracted in 200 components = -0.000551283 Jy ! Clean residual min=-0.004884 max=0.004556 Jy/beam ! Clean residual mean=0.000025 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.449227 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.449227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079469Jy sigma=0.000674 ! Fit after self-cal, rms=0.079463Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=8.35 mas, bpa=-4.721 degrees ! Estimated noise=1636.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 8.35 at -4.721 degrees (North through East) ! Clean map min=-0.0090156 max=0.41653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=6.824 mas, bpa=-5.345 degrees ! Estimated noise=2150.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310979 Jy ! Component: 100 - total flux cleaned = 0.386981 Jy ! Component: 150 - total flux cleaned = 0.42341 Jy ! Component: 200 - total flux cleaned = 0.443502 Jy ! Total flux subtracted in 200 components = 0.443502 Jy ! Clean residual min=-0.009205 max=0.011696 Jy/beam ! Clean residual mean=0.000018 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.443502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.443502 Jy ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=8.35 mas, bpa=-4.721 degrees ! Estimated noise=1636.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920305 Jy ! Component: 100 - total flux cleaned = 0.0101613 Jy ! Component: 150 - total flux cleaned = 0.010997 Jy ! Component: 200 - total flux cleaned = 0.0114954 Jy ! Total flux subtracted in 200 components = 0.0114954 Jy ! Clean residual min=-0.006238 max=0.006898 Jy/beam ! Clean residual mean=0.000047 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.454998 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.454998 Jy ! Inverting map ! Added new window around map position (17.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340467 Jy ! Component: 100 - total flux cleaned = 0.00341011 Jy ! Component: 150 - total flux cleaned = 0.00340912 Jy ! Component: 200 - total flux cleaned = 0.00321776 Jy ! Total flux subtracted in 200 components = 0.00321776 Jy ! Clean residual min=-0.005718 max=0.006241 Jy/beam ! Clean residual mean=0.000050 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.458216 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.458216 Jy ! Inverting map ! Added new window around map position (-78.5, -57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362866 Jy ! Component: 100 - total flux cleaned = 0.00363222 Jy ! Component: 150 - total flux cleaned = 0.00330554 Jy ! Component: 200 - total flux cleaned = 0.00299387 Jy ! Total flux subtracted in 200 components = 0.00299387 Jy ! Clean residual min=-0.005371 max=0.005701 Jy/beam ! Clean residual mean=0.000034 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.461209 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.461209 Jy ! Inverting map ! Added new window around map position (-71, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328709 Jy ! Component: 100 - total flux cleaned = 0.00344476 Jy ! Component: 150 - total flux cleaned = 0.00301321 Jy ! Component: 200 - total flux cleaned = 0.00259952 Jy ! Total flux subtracted in 200 components = 0.00259952 Jy ! Clean residual min=-0.004876 max=0.004739 Jy/beam ! Clean residual mean=0.000018 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.463809 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 78 components and 0.463809 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.951 mas, bmaj=22.13 mas, bpa=0.6709 degrees ! Estimated noise=1875.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322205 Jy ! Component: 100 - total flux cleaned = -0.00416443 Jy ! Component: 150 - total flux cleaned = -0.00468969 Jy ! Component: 200 - total flux cleaned = -0.00535273 Jy ! Total flux subtracted in 200 components = -0.00535273 Jy ! Clean residual min=-0.004639 max=0.004568 Jy/beam ! Clean residual mean=0.000049 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.458456 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469007 Jy ! Component: 100 - total flux cleaned = -0.000844962 Jy ! Component: 150 - total flux cleaned = -0.00120626 Jy ! Component: 200 - total flux cleaned = -0.00141558 Jy ! Total flux subtracted in 200 components = -0.00141558 Jy ! Clean residual min=-0.004541 max=0.004420 Jy/beam ! Clean residual mean=0.000048 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.457041 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 113 components and 0.457041 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=8.35 mas, bpa=-4.721 degrees ! Estimated noise=1636.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378619 Jy ! Component: 100 - total flux cleaned = 0.000620441 Jy ! Component: 150 - total flux cleaned = 0.000616259 Jy ! Component: 200 - total flux cleaned = 0.000504762 Jy ! Total flux subtracted in 200 components = 0.000504762 Jy ! Clean residual min=-0.004635 max=0.004216 Jy/beam ! Clean residual mean=0.000023 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.457545 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.457545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079462Jy sigma=0.000672 ! Fit after self-cal, rms=0.079357Jy sigma=0.000671 wmodel J0648-3044_S_2017_02_24_pus_map.mod ! Writing 127 model components to file: J0648-3044_S_2017_02_24_pus_map.mod wobs J0648-3044_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0648-3044_S_2017_02_24_pus_uvs.fits wwins J0648-3044_S_2017_02_24_pus_map.win ! wwins: Wrote 6 windows to J0648-3044_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172022 Jy ! Component: 100 - total flux cleaned = 0.00113661 Jy ! Component: 150 - total flux cleaned = 0.00198228 Jy ! Component: 200 - total flux cleaned = 0.00259231 Jy ! Component: 250 - total flux cleaned = 0.00324767 Jy ! Component: 300 - total flux cleaned = 0.00375532 Jy ! Component: 350 - total flux cleaned = 0.00424916 Jy ! Component: 400 - total flux cleaned = 0.00466857 Jy ! Component: 450 - total flux cleaned = 0.00507807 Jy ! Component: 500 - total flux cleaned = 0.00559079 Jy ! Component: 550 - total flux cleaned = 0.00603481 Jy ! Component: 600 - total flux cleaned = 0.00652249 Jy ! Component: 650 - total flux cleaned = 0.00668214 Jy ! Component: 700 - total flux cleaned = 0.00720483 Jy ! Component: 750 - total flux cleaned = 0.00751205 Jy ! Component: 800 - total flux cleaned = 0.00781472 Jy ! Component: 850 - total flux cleaned = 0.00821133 Jy ! Component: 900 - total flux cleaned = 0.00830859 Jy ! Component: 950 - total flux cleaned = 0.00854978 Jy ! Component: 1000 - total flux cleaned = 0.00878699 Jy ! Component: 1050 - total flux cleaned = 0.00911388 Jy ! Component: 1100 - total flux cleaned = 0.0092062 Jy ! Component: 1150 - total flux cleaned = 0.0093429 Jy ! Component: 1200 - total flux cleaned = 0.00938789 Jy ! Component: 1250 - total flux cleaned = 0.0095659 Jy ! Component: 1300 - total flux cleaned = 0.0096977 Jy ! Component: 1350 - total flux cleaned = 0.00991498 Jy ! Component: 1400 - total flux cleaned = 0.0100434 Jy ! Component: 1450 - total flux cleaned = 0.0102131 Jy ! Component: 1500 - total flux cleaned = 0.0102967 Jy ! Component: 1550 - total flux cleaned = 0.0106282 Jy ! Component: 1600 - total flux cleaned = 0.0106674 Jy ! Component: 1650 - total flux cleaned = 0.0107071 Jy ! Component: 1700 - total flux cleaned = 0.0109079 Jy ! Component: 1750 - total flux cleaned = 0.0111056 Jy ! Component: 1800 - total flux cleaned = 0.0113402 Jy ! Component: 1850 - total flux cleaned = 0.0113401 Jy ! Component: 1900 - total flux cleaned = 0.0114941 Jy ! Component: 1950 - total flux cleaned = 0.0116844 Jy ! Component: 2000 - total flux cleaned = 0.011872 Jy ! Component: 2050 - total flux cleaned = 0.0120204 Jy ! Component: 2100 - total flux cleaned = 0.012204 Jy ! Component: 2150 - total flux cleaned = 0.0123134 Jy ! Component: 2200 - total flux cleaned = 0.0125303 Jy ! Component: 2250 - total flux cleaned = 0.0127445 Jy ! Component: 2300 - total flux cleaned = 0.0127797 Jy ! Component: 2350 - total flux cleaned = 0.012885 Jy ! Component: 2400 - total flux cleaned = 0.0129899 Jy ! Component: 2450 - total flux cleaned = 0.0131291 Jy ! Component: 2500 - total flux cleaned = 0.0134379 Jy ! Component: 2550 - total flux cleaned = 0.0134715 Jy ! Component: 2600 - total flux cleaned = 0.0137079 Jy ! Component: 2650 - total flux cleaned = 0.013775 Jy ! Component: 2700 - total flux cleaned = 0.0139739 Jy ! Component: 2750 - total flux cleaned = 0.0141715 Jy ! Component: 2800 - total flux cleaned = 0.0142692 Jy ! Component: 2850 - total flux cleaned = 0.0145282 Jy ! Component: 2900 - total flux cleaned = 0.0145597 Jy ! Component: 2950 - total flux cleaned = 0.0146876 Jy ! Component: 3000 - total flux cleaned = 0.0148774 Jy ! Component: 3050 - total flux cleaned = 0.0148775 Jy ! Component: 3100 - total flux cleaned = 0.0151585 Jy ! Component: 3150 - total flux cleaned = 0.0153133 Jy ! Component: 3200 - total flux cleaned = 0.0152821 Jy ! Component: 3250 - total flux cleaned = 0.0154045 Jy ! Component: 3300 - total flux cleaned = 0.0154651 Jy ! Component: 3350 - total flux cleaned = 0.015646 Jy ! Component: 3400 - total flux cleaned = 0.0157358 Jy ! Component: 3450 - total flux cleaned = 0.0158551 Jy ! Component: 3500 - total flux cleaned = 0.0158848 Jy ! Component: 3550 - total flux cleaned = 0.015973 Jy ! Component: 3600 - total flux cleaned = 0.0160603 Jy ! Component: 3650 - total flux cleaned = 0.0161764 Jy ! Component: 3700 - total flux cleaned = 0.01632 Jy ! Component: 3750 - total flux cleaned = 0.0162345 Jy ! Component: 3800 - total flux cleaned = 0.0163479 Jy ! Component: 3850 - total flux cleaned = 0.0165176 Jy ! Component: 3900 - total flux cleaned = 0.0165175 Jy ! Component: 3950 - total flux cleaned = 0.0166847 Jy ! Component: 4000 - total flux cleaned = 0.0167123 Jy ! Component: 4050 - total flux cleaned = 0.0167674 Jy ! Total flux subtracted in 4096 components = 0.0167951 Jy ! Clean residual min=-0.001761 max=0.001897 Jy/beam ! Clean residual mean=0.000000 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.47434 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 390 components and 0.47434 Jy ![Exited script file: muppet] wmap "J0648-3044_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 8.35 at -4.721 degrees (North through East) ! Clean map min=-0.0043514 max=0.40218 Jy/beam ! Writing clean map to FITS file: J0648-3044_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.402177 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000504806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.376556 0.376556 0.753111 1.50622 3.01245 6.02489 12.0498 24.0996 48.1991 96.3982 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.402 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 8.35 at -4.721 degrees (North through East) ! Clean map min=-0.0043514 max=0.40218 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0648-3044_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:20:30 2019