! Started logfile: J0648-1744_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:49 2019 obs J0648-1744_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0648-1744_S_2017_06_15_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.864683 visibilities/baseline/integration-bin. ! Found source: J0648-1744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 8716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-1744_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 349 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.816141Jy sigma=0.005758 ! Fit after self-cal, rms=0.796497Jy sigma=0.005630 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.604 mas, bpa=-4.457 degrees ! Estimated noise=1672.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158655 Jy ! Component: 100 - total flux cleaned = 0.210347 Jy ! Total flux subtracted in 100 components = 0.210347 Jy ! Clean residual min=-0.017421 max=0.032308 Jy/beam ! Clean residual mean=-0.000133 rms=0.005261 Jy/beam ! Combined flux in latest and established models = 0.210347 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.210347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135163Jy sigma=0.000980 ! Fit after self-cal, rms=0.135031Jy sigma=0.000978 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.696 mas, bpa=-4.051 degrees ! Estimated noise=1250.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445235 Jy ! Component: 100 - total flux cleaned = 0.0729704 Jy ! Component: 150 - total flux cleaned = 0.0932404 Jy ! Component: 200 - total flux cleaned = 0.108391 Jy ! Total flux subtracted in 200 components = 0.108391 Jy ! Clean residual min=-0.014016 max=0.029023 Jy/beam ! Clean residual mean=-0.000105 rms=0.005096 Jy/beam ! Combined flux in latest and established models = 0.318738 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 57 components and 0.318738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119323Jy sigma=0.000830 ! Fit after self-cal, rms=0.118057Jy sigma=0.000820 ! Inverting map ! Added new window around map position (15.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288955 Jy ! Component: 100 - total flux cleaned = 0.0455722 Jy ! Component: 150 - total flux cleaned = 0.0581932 Jy ! Component: 200 - total flux cleaned = 0.0683846 Jy ! Total flux subtracted in 200 components = 0.0683846 Jy ! Clean residual min=-0.011406 max=0.016076 Jy/beam ! Clean residual mean=-0.000053 rms=0.003449 Jy/beam ! Combined flux in latest and established models = 0.387123 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 111 components and 0.387123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110612Jy sigma=0.000753 ! Fit after self-cal, rms=0.109784Jy sigma=0.000747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 0.89 HN 1.06 KP 0.98 ! LA 0.97 MK 1.02 NL 0.88 OV 0.99 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.54 FD 0.93 HN 1.13 KP 0.95 ! LA 0.93 MK 0.98 NL 0.98 OV 1.00 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.61 FD 0.98 HN 1.05 KP 0.94 ! LA 0.95 MK 1.01 NL 0.97 OV 0.96 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.11 KP 1.00* ! LA 0.89 MK 0.98 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.109784Jy sigma=0.000747 ! Fit after self-cal, rms=0.113630Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.803 mas, bpa=-3.056 degrees ! Estimated noise=1237.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102183 Jy ! Component: 100 - total flux cleaned = 0.0147811 Jy ! Component: 150 - total flux cleaned = 0.0157047 Jy ! Component: 200 - total flux cleaned = 0.0158462 Jy ! Total flux subtracted in 200 components = 0.0158462 Jy ! Clean residual min=-0.005588 max=0.006199 Jy/beam ! Clean residual mean=0.000048 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.402969 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 150 components and 0.402969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112676Jy sigma=0.000685 ! Fit after self-cal, rms=0.112910Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112910Jy sigma=0.000683 ! Fit after self-cal, rms=0.113900Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.774 mas, bpa=-2.988 degrees ! Estimated noise=1237.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367195 Jy ! Component: 100 - total flux cleaned = 0.00459574 Jy ! Component: 150 - total flux cleaned = 0.00481848 Jy ! Component: 200 - total flux cleaned = 0.00491102 Jy ! Total flux subtracted in 200 components = 0.00491102 Jy ! Clean residual min=-0.004675 max=0.004848 Jy/beam ! Clean residual mean=0.000021 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.40788 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 177 components and 0.40788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113645Jy sigma=0.000678 ! Fit after self-cal, rms=0.113595Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, 34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424663 Jy ! Component: 100 - total flux cleaned = 0.00584161 Jy ! Component: 150 - total flux cleaned = 0.00619952 Jy ! Component: 200 - total flux cleaned = 0.00635472 Jy ! Total flux subtracted in 200 components = 0.00635472 Jy ! Clean residual min=-0.004286 max=0.003815 Jy/beam ! Clean residual mean=0.000013 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.414235 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 205 components and 0.414235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113381Jy sigma=0.000675 ! Fit after self-cal, rms=0.113365Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113365Jy sigma=0.000675 ! Fit after self-cal, rms=0.113382Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.757 mas, bpa=-2.844 degrees ! Estimated noise=1234.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162803 Jy ! Component: 100 - total flux cleaned = 0.00221302 Jy ! Component: 150 - total flux cleaned = 0.00228946 Jy ! Component: 200 - total flux cleaned = 0.00222398 Jy ! Total flux subtracted in 200 components = 0.00222398 Jy ! Clean residual min=-0.003823 max=0.003358 Jy/beam ! Clean residual mean=0.000010 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.416459 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 220 components and 0.416459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113280Jy sigma=0.000674 ! Fit after self-cal, rms=0.113271Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460246 Jy ! Component: 100 - total flux cleaned = 0.000401426 Jy ! Component: 150 - total flux cleaned = 0.000344897 Jy ! Component: 200 - total flux cleaned = 0.000235577 Jy ! Total flux subtracted in 200 components = 0.000235577 Jy ! Clean residual min=-0.003629 max=0.003389 Jy/beam ! Clean residual mean=0.000009 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.416694 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 232 components and 0.416694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113213Jy sigma=0.000673 ! Fit after self-cal, rms=0.113208Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113208Jy sigma=0.000673 ! Fit after self-cal, rms=0.113515Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.526 mas, bmaj=15.69 mas, bpa=-0.748 degrees ! Estimated noise=1561.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.57862e-05 Jy ! Component: 100 - total flux cleaned = -0.000130899 Jy ! Component: 150 - total flux cleaned = -0.000367253 Jy ! Component: 200 - total flux cleaned = -0.00062657 Jy ! Total flux subtracted in 200 components = -0.00062657 Jy ! Clean residual min=-0.004492 max=0.003360 Jy/beam ! Clean residual mean=0.000020 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.416068 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 264 components and 0.416068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113473Jy sigma=0.000673 ! Fit after self-cal, rms=0.113470Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.91494e-05 Jy ! Component: 100 - total flux cleaned = -0.000255322 Jy ! Component: 150 - total flux cleaned = -0.000431051 Jy ! Component: 200 - total flux cleaned = -0.000599337 Jy ! Total flux subtracted in 200 components = -0.000599337 Jy ! Clean residual min=-0.004274 max=0.003257 Jy/beam ! Clean residual mean=0.000019 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.415468 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 278 components and 0.415468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113452Jy sigma=0.000673 ! Fit after self-cal, rms=0.113445Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.747 mas, bpa=-2.73 degrees ! Estimated noise=1233.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 7.747 at -2.73 degrees (North through East) ! Clean map min=-0.0034005 max=0.20055 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.65 mas, bpa=-2.509 degrees ! Estimated noise=1643.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155992 Jy ! Component: 100 - total flux cleaned = 0.209528 Jy ! Component: 150 - total flux cleaned = 0.244475 Jy ! Component: 200 - total flux cleaned = 0.270902 Jy ! Total flux subtracted in 200 components = 0.270902 Jy ! Clean residual min=-0.010134 max=0.015468 Jy/beam ! Clean residual mean=-0.000060 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.270901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.270901 Jy ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.747 mas, bpa=-2.73 degrees ! Estimated noise=1233.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315844 Jy ! Component: 100 - total flux cleaned = 0.0541175 Jy ! Component: 150 - total flux cleaned = 0.0708714 Jy ! Component: 200 - total flux cleaned = 0.0837099 Jy ! Total flux subtracted in 200 components = 0.0837099 Jy ! Clean residual min=-0.005674 max=0.007668 Jy/beam ! Clean residual mean=-0.000050 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.354611 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 125 components and 0.354612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.526 mas, bmaj=15.69 mas, bpa=-0.748 degrees ! Estimated noise=1561.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175182 Jy ! Component: 100 - total flux cleaned = 0.0282157 Jy ! Component: 150 - total flux cleaned = 0.0354035 Jy ! Component: 200 - total flux cleaned = 0.0405669 Jy ! Total flux subtracted in 200 components = 0.0405669 Jy ! Clean residual min=-0.004640 max=0.003633 Jy/beam ! Clean residual mean=-0.000020 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.395178 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386643 Jy ! Component: 100 - total flux cleaned = 0.00681534 Jy ! Component: 150 - total flux cleaned = 0.00910396 Jy ! Component: 200 - total flux cleaned = 0.0108936 Jy ! Total flux subtracted in 200 components = 0.0108936 Jy ! Clean residual min=-0.003873 max=0.002841 Jy/beam ! Clean residual mean=-0.000002 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.406072 Jy ! Adding 162 model components to the UV plane model. ! The established model now contains 271 components and 0.406072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.747 mas, bpa=-2.73 degrees ! Estimated noise=1233.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166358 Jy ! Component: 100 - total flux cleaned = 0.00260129 Jy ! Component: 150 - total flux cleaned = 0.00307149 Jy ! Component: 200 - total flux cleaned = 0.00333805 Jy ! Total flux subtracted in 200 components = 0.00333805 Jy ! Clean residual min=-0.002819 max=0.003209 Jy/beam ! Clean residual mean=-0.000001 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.40941 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 298 components and 0.40941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113504Jy sigma=0.000672 ! Fit after self-cal, rms=0.113434Jy sigma=0.000672 wmodel J0648-1744_S_2017_06_15_pus_map.mod ! Writing 298 model components to file: J0648-1744_S_2017_06_15_pus_map.mod wobs J0648-1744_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0648-1744_S_2017_06_15_pus_uvs.fits wwins J0648-1744_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0648-1744_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256705 Jy ! Component: 100 - total flux cleaned = 0.000353197 Jy ! Component: 150 - total flux cleaned = 0.000444514 Jy ! Component: 200 - total flux cleaned = 0.000356741 Jy ! Component: 250 - total flux cleaned = 0.000314615 Jy ! Component: 300 - total flux cleaned = 0.000274124 Jy ! Component: 350 - total flux cleaned = 7.42254e-05 Jy ! Component: 400 - total flux cleaned = -8.16673e-05 Jy ! Component: 450 - total flux cleaned = -0.000196431 Jy ! Component: 500 - total flux cleaned = -0.000383043 Jy ! Component: 550 - total flux cleaned = -0.000565061 Jy ! Component: 600 - total flux cleaned = -0.000458393 Jy ! Component: 650 - total flux cleaned = -0.000459073 Jy ! Component: 700 - total flux cleaned = -0.000561909 Jy ! Component: 750 - total flux cleaned = -0.000561925 Jy ! Component: 800 - total flux cleaned = -0.000594982 Jy ! Component: 850 - total flux cleaned = -0.000660276 Jy ! Component: 900 - total flux cleaned = -0.000660422 Jy ! Component: 950 - total flux cleaned = -0.000755068 Jy ! Component: 1000 - total flux cleaned = -0.000755359 Jy ! Component: 1050 - total flux cleaned = -0.000755345 Jy ! Component: 1100 - total flux cleaned = -0.000846148 Jy ! Component: 1150 - total flux cleaned = -0.000905852 Jy ! Component: 1200 - total flux cleaned = -0.00102316 Jy ! Component: 1250 - total flux cleaned = -0.00113904 Jy ! Component: 1300 - total flux cleaned = -0.00110993 Jy ! Component: 1350 - total flux cleaned = -0.00119467 Jy ! Component: 1400 - total flux cleaned = -0.00125064 Jy ! Component: 1450 - total flux cleaned = -0.00133354 Jy ! Component: 1500 - total flux cleaned = -0.00136064 Jy ! Component: 1550 - total flux cleaned = -0.00138753 Jy ! Component: 1600 - total flux cleaned = -0.00138782 Jy ! Component: 1650 - total flux cleaned = -0.00144087 Jy ! Component: 1700 - total flux cleaned = -0.00144106 Jy ! Component: 1750 - total flux cleaned = -0.00133803 Jy ! Component: 1800 - total flux cleaned = -0.00131274 Jy ! Component: 1850 - total flux cleaned = -0.00136313 Jy ! Component: 1900 - total flux cleaned = -0.00138833 Jy ! Component: 1950 - total flux cleaned = -0.00143783 Jy ! Component: 2000 - total flux cleaned = -0.0013642 Jy ! Component: 2050 - total flux cleaned = -0.00136419 Jy ! Component: 2100 - total flux cleaned = -0.00136393 Jy ! Component: 2150 - total flux cleaned = -0.00131607 Jy ! Component: 2200 - total flux cleaned = -0.00131584 Jy ! Component: 2250 - total flux cleaned = -0.00124558 Jy ! Component: 2300 - total flux cleaned = -0.00122223 Jy ! Component: 2350 - total flux cleaned = -0.00119925 Jy ! Component: 2400 - total flux cleaned = -0.00110783 Jy ! Component: 2450 - total flux cleaned = -0.0011305 Jy ! Component: 2500 - total flux cleaned = -0.00101838 Jy ! Component: 2550 - total flux cleaned = -0.00106338 Jy ! Component: 2600 - total flux cleaned = -0.000975129 Jy ! Component: 2650 - total flux cleaned = -0.00095321 Jy ! Component: 2700 - total flux cleaned = -0.000931421 Jy ! Component: 2750 - total flux cleaned = -0.000931672 Jy ! Component: 2800 - total flux cleaned = -0.000802886 Jy ! Component: 2850 - total flux cleaned = -0.000802857 Jy ! Component: 2900 - total flux cleaned = -0.000760599 Jy ! Component: 2950 - total flux cleaned = -0.000676744 Jy ! Component: 3000 - total flux cleaned = -0.000531237 Jy ! Component: 3050 - total flux cleaned = -0.000614032 Jy ! Component: 3100 - total flux cleaned = -0.000572966 Jy ! Component: 3150 - total flux cleaned = -0.000511782 Jy ! Component: 3200 - total flux cleaned = -0.000410998 Jy ! Component: 3250 - total flux cleaned = -0.000390943 Jy ! Component: 3300 - total flux cleaned = -0.000410835 Jy ! Component: 3350 - total flux cleaned = -0.000331494 Jy ! Component: 3400 - total flux cleaned = -0.000252806 Jy ! Component: 3450 - total flux cleaned = -0.000194485 Jy ! Component: 3500 - total flux cleaned = -0.000194643 Jy ! Component: 3550 - total flux cleaned = -0.000156309 Jy ! Component: 3600 - total flux cleaned = -0.000137189 Jy ! Component: 3650 - total flux cleaned = -6.12415e-05 Jy ! Component: 3700 - total flux cleaned = -0.000117859 Jy ! Component: 3750 - total flux cleaned = -8.03083e-05 Jy ! Component: 3800 - total flux cleaned = -4.29751e-05 Jy ! Component: 3850 - total flux cleaned = -5.94354e-06 Jy ! Component: 3900 - total flux cleaned = -6.0013e-06 Jy ! Component: 3950 - total flux cleaned = 1.23038e-05 Jy ! Component: 4000 - total flux cleaned = 4.89197e-05 Jy ! Component: 4050 - total flux cleaned = 4.89232e-05 Jy ! Total flux subtracted in 4096 components = 8.48159e-05 Jy ! Clean residual min=-0.001098 max=0.001190 Jy/beam ! Clean residual mean=-0.000005 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.409495 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 568 components and 0.409495 Jy ![Exited script file: muppet] wmap "J0648-1744_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 7.747 at -2.73 degrees (North through East) ! Clean map min=-0.0021206 max=0.20296 Jy/beam ! Writing clean map to FITS file: J0648-1744_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.202964 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032255 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.476759 0.476759 0.953518 1.90704 3.81407 7.62814 15.2563 30.5126 61.0252 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.202 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 7.747 at -2.73 degrees (North through East) ! Clean map min=-0.0021206 max=0.20296 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0648-1744_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:54 2019