! Started logfile: J0646-3903_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:06:31 2019 obs J0646-3903_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0646-3903_S_2017_01_16_pus_uva.fits ! AN table 1: 130 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.536581 visibilities/baseline/integration-bin. ! Found source: J0646-3903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 12556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0646-3903_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 373 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 393 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917949Jy sigma=0.004479 ! Fit after self-cal, rms=0.875795Jy sigma=0.004277 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=10.1 mas, bpa=16.95 degrees ! Estimated noise=3320.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0995 Jy ! Component: 100 - total flux cleaned = 0.126006 Jy ! Total flux subtracted in 100 components = 0.126006 Jy ! Clean residual min=-0.009247 max=0.012804 Jy/beam ! Clean residual mean=-0.000173 rms=0.002779 Jy/beam ! Combined flux in latest and established models = 0.126006 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.126006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176688Jy sigma=0.000691 ! Fit after self-cal, rms=0.176635Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=14.29 mas, bpa=20.42 degrees ! Estimated noise=1416.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284807 Jy ! Component: 100 - total flux cleaned = 0.0409875 Jy ! Component: 150 - total flux cleaned = 0.0473725 Jy ! Component: 200 - total flux cleaned = 0.050721 Jy ! Total flux subtracted in 200 components = 0.050721 Jy ! Clean residual min=-0.005283 max=0.007038 Jy/beam ! Clean residual mean=-0.000164 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.176727 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 82 components and 0.176727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173210Jy sigma=0.000660 ! Fit after self-cal, rms=0.173392Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.91 HN 0.91 KP 0.98 ! LA 0.97 MK 1.00* NL 1.21 OV 0.99 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.00 KP 0.93 ! LA 0.98 MK 1.00* NL 1.33 OV 0.96 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 0.92 HN 1.05 KP 0.98 ! LA 0.97 MK 1.00* NL 1.33 OV 0.93 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.97 HN 0.97 KP 1.08 ! LA 0.88 MK 1.00* NL 1.00* OV 1.01 ! PT 1.01 SC 0.84 ! ! ! Fit before self-cal, rms=0.173392Jy sigma=0.000659 ! Fit after self-cal, rms=0.197538Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.145 mas, bmaj=14.29 mas, bpa=20.26 degrees ! Estimated noise=1420.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000845105 Jy ! Component: 100 - total flux cleaned = 0.000687047 Jy ! Component: 150 - total flux cleaned = 0.000622334 Jy ! Component: 200 - total flux cleaned = 0.000573436 Jy ! Total flux subtracted in 200 components = 0.000573436 Jy ! Clean residual min=-0.004206 max=0.004374 Jy/beam ! Clean residual mean=-0.000145 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.1773 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.1773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197483Jy sigma=0.000653 ! Fit after self-cal, rms=0.198139Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198139Jy sigma=0.000652 ! Fit after self-cal, rms=0.202826Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=14.29 mas, bpa=20.03 degrees ! Estimated noise=1424.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986616 Jy ! Component: 100 - total flux cleaned = 0.000988155 Jy ! Component: 150 - total flux cleaned = 0.000988156 Jy ! Component: 200 - total flux cleaned = 0.000923363 Jy ! Total flux subtracted in 200 components = 0.000923363 Jy ! Clean residual min=-0.003535 max=0.003385 Jy/beam ! Clean residual mean=-0.000101 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.178224 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.178224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202806Jy sigma=0.000649 ! Fit after self-cal, rms=0.203084Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106853 Jy ! Component: 100 - total flux cleaned = 8.34767e-05 Jy ! Component: 150 - total flux cleaned = 3.98513e-05 Jy ! Component: 200 - total flux cleaned = -1.89211e-05 Jy ! Total flux subtracted in 200 components = -1.89211e-05 Jy ! Clean residual min=-0.003479 max=0.003350 Jy/beam ! Clean residual mean=-0.000103 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.178205 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 101 components and 0.178205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203079Jy sigma=0.000649 ! Fit after self-cal, rms=0.203082Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203082Jy sigma=0.000649 ! Fit after self-cal, rms=0.205256Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=14.26 mas, bpa=19.86 degrees ! Estimated noise=1429.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803404 Jy ! Component: 100 - total flux cleaned = 0.000825233 Jy ! Component: 150 - total flux cleaned = 0.000882847 Jy ! Component: 200 - total flux cleaned = 0.000881183 Jy ! Total flux subtracted in 200 components = 0.000881183 Jy ! Clean residual min=-0.003537 max=0.003415 Jy/beam ! Clean residual mean=-0.000100 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.179086 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 0.179086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205243Jy sigma=0.000649 ! Fit after self-cal, rms=0.205277Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114562 Jy ! Component: 100 - total flux cleaned = 8.00713e-05 Jy ! Component: 150 - total flux cleaned = 4.80635e-05 Jy ! Component: 200 - total flux cleaned = 3.29792e-05 Jy ! Total flux subtracted in 200 components = 3.29792e-05 Jy ! Clean residual min=-0.003537 max=0.003394 Jy/beam ! Clean residual mean=-0.000100 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.179119 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 0.179119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205273Jy sigma=0.000649 ! Fit after self-cal, rms=0.205275Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205275Jy sigma=0.000649 ! Fit after self-cal, rms=0.206611Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.662 mas, bmaj=31.24 mas, bpa=9.675 degrees ! Estimated noise=1571.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010293 Jy ! Component: 100 - total flux cleaned = 0.00104832 Jy ! Component: 150 - total flux cleaned = 0.00107707 Jy ! Component: 200 - total flux cleaned = 0.00106475 Jy ! Total flux subtracted in 200 components = 0.00106475 Jy ! Clean residual min=-0.003840 max=0.003324 Jy/beam ! Clean residual mean=-0.000151 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.180184 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 106 components and 0.180184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206606Jy sigma=0.000649 ! Fit after self-cal, rms=0.206607Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.98188e-05 Jy ! Component: 100 - total flux cleaned = 2.74477e-05 Jy ! Component: 150 - total flux cleaned = 1.63854e-05 Jy ! Component: 200 - total flux cleaned = 5.23033e-06 Jy ! Total flux subtracted in 200 components = 5.23033e-06 Jy ! Clean residual min=-0.003841 max=0.003312 Jy/beam ! Clean residual mean=-0.000150 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.180189 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 111 components and 0.180189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206608Jy sigma=0.000649 ! Fit after self-cal, rms=0.206609Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=14.24 mas, bpa=19.77 degrees ! Estimated noise=1434.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.147 x 14.24 at 19.77 degrees (North through East) ! Clean map min=-0.0034652 max=0.13716 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=10.06 mas, bpa=16 degrees ! Estimated noise=3340.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964408 Jy ! Component: 100 - total flux cleaned = 0.12849 Jy ! Component: 150 - total flux cleaned = 0.145779 Jy ! Component: 200 - total flux cleaned = 0.156304 Jy ! Total flux subtracted in 200 components = 0.156304 Jy ! Clean residual min=-0.007850 max=0.007916 Jy/beam ! Clean residual mean=-0.000157 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.156304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.156304 Jy ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=14.24 mas, bpa=19.77 degrees ! Estimated noise=1434.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127226 Jy ! Component: 100 - total flux cleaned = 0.0181056 Jy ! Component: 150 - total flux cleaned = 0.0206534 Jy ! Component: 200 - total flux cleaned = 0.0215531 Jy ! Total flux subtracted in 200 components = 0.0215531 Jy ! Clean residual min=-0.003826 max=0.003587 Jy/beam ! Clean residual mean=-0.000106 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.177857 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.177857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.662 mas, bmaj=31.24 mas, bpa=9.675 degrees ! Estimated noise=1571.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102492 Jy ! Component: 100 - total flux cleaned = 0.00108676 Jy ! Component: 150 - total flux cleaned = 0.0011414 Jy ! Component: 200 - total flux cleaned = 0.00118829 Jy ! Total flux subtracted in 200 components = 0.00118829 Jy ! Clean residual min=-0.004094 max=0.003395 Jy/beam ! Clean residual mean=-0.000155 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.179046 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.26598e-05 Jy ! Component: 100 - total flux cleaned = 8.09263e-05 Jy ! Component: 150 - total flux cleaned = 0.000115528 Jy ! Component: 200 - total flux cleaned = 0.000148066 Jy ! Total flux subtracted in 200 components = 0.000148066 Jy ! Clean residual min=-0.004048 max=0.003423 Jy/beam ! Clean residual mean=-0.000155 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.179194 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.179194 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=14.24 mas, bpa=19.77 degrees ! Estimated noise=1434.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185889 Jy ! Component: 100 - total flux cleaned = -0.000184242 Jy ! Component: 150 - total flux cleaned = -0.000148681 Jy ! Component: 200 - total flux cleaned = -0.00014934 Jy ! Total flux subtracted in 200 components = -0.00014934 Jy ! Clean residual min=-0.003673 max=0.003257 Jy/beam ! Clean residual mean=-0.000102 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.179044 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 105 components and 0.179044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206668Jy sigma=0.000649 ! Fit after self-cal, rms=0.206679Jy sigma=0.000649 wmodel J0646-3903_S_2017_01_16_pus_map.mod ! Writing 105 model components to file: J0646-3903_S_2017_01_16_pus_map.mod wobs J0646-3903_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0646-3903_S_2017_01_16_pus_uvs.fits wwins J0646-3903_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0646-3903_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300505 Jy ! Component: 100 - total flux cleaned = -0.000296634 Jy ! Component: 150 - total flux cleaned = -0.000707295 Jy ! Component: 200 - total flux cleaned = -0.00114926 Jy ! Component: 250 - total flux cleaned = -0.00157006 Jy ! Component: 300 - total flux cleaned = -0.00192802 Jy ! Component: 350 - total flux cleaned = -0.00240263 Jy ! Component: 400 - total flux cleaned = -0.00281703 Jy ! Component: 450 - total flux cleaned = -0.00317866 Jy ! Component: 500 - total flux cleaned = -0.00353024 Jy ! Component: 550 - total flux cleaned = -0.00406034 Jy ! Component: 600 - total flux cleaned = -0.00435475 Jy ! Component: 650 - total flux cleaned = -0.00475093 Jy ! Component: 700 - total flux cleaned = -0.00503303 Jy ! Component: 750 - total flux cleaned = -0.00523975 Jy ! Component: 800 - total flux cleaned = -0.00544336 Jy ! Component: 850 - total flux cleaned = -0.00567685 Jy ! Component: 900 - total flux cleaned = -0.00590597 Jy ! Component: 950 - total flux cleaned = -0.00609858 Jy ! Component: 1000 - total flux cleaned = -0.00628832 Jy ! Component: 1050 - total flux cleaned = -0.00647543 Jy ! Component: 1100 - total flux cleaned = -0.0065982 Jy ! Component: 1150 - total flux cleaned = -0.0067191 Jy ! Component: 1200 - total flux cleaned = -0.00692718 Jy ! Component: 1250 - total flux cleaned = -0.00704449 Jy ! Component: 1300 - total flux cleaned = -0.00721865 Jy ! Component: 1350 - total flux cleaned = -0.00747624 Jy ! Component: 1400 - total flux cleaned = -0.00770238 Jy ! Component: 1450 - total flux cleaned = -0.0078689 Jy ! Component: 1500 - total flux cleaned = -0.00808879 Jy ! Component: 1550 - total flux cleaned = -0.00827913 Jy ! Component: 1600 - total flux cleaned = -0.0084401 Jy ! Component: 1650 - total flux cleaned = -0.00867887 Jy ! Component: 1700 - total flux cleaned = -0.00891458 Jy ! Component: 1750 - total flux cleaned = -0.00906982 Jy ! Component: 1800 - total flux cleaned = -0.00935081 Jy ! Component: 1850 - total flux cleaned = -0.00950209 Jy ! Component: 1900 - total flux cleaned = -0.00975192 Jy ! Component: 1950 - total flux cleaned = -0.00992487 Jy ! Component: 2000 - total flux cleaned = -0.0101202 Jy ! Component: 2050 - total flux cleaned = -0.0103376 Jy ! Component: 2100 - total flux cleaned = -0.0106007 Jy ! Component: 2150 - total flux cleaned = -0.010837 Jy ! Component: 2200 - total flux cleaned = -0.0110946 Jy ! Component: 2250 - total flux cleaned = -0.0113031 Jy ! Component: 2300 - total flux cleaned = -0.0115325 Jy ! Component: 2350 - total flux cleaned = -0.0116463 Jy ! Component: 2400 - total flux cleaned = -0.0118264 Jy ! Component: 2450 - total flux cleaned = -0.0120275 Jy ! Component: 2500 - total flux cleaned = -0.0121826 Jy ! Component: 2550 - total flux cleaned = -0.0123366 Jy ! Component: 2600 - total flux cleaned = -0.0125543 Jy ! Component: 2650 - total flux cleaned = -0.012727 Jy ! Component: 2700 - total flux cleaned = -0.0128985 Jy ! Component: 2750 - total flux cleaned = -0.0130474 Jy ! Component: 2800 - total flux cleaned = -0.0132793 Jy ! Component: 2850 - total flux cleaned = -0.0134051 Jy ! Component: 2900 - total flux cleaned = -0.0135506 Jy ! Component: 2950 - total flux cleaned = -0.0137568 Jy ! Component: 3000 - total flux cleaned = -0.0138591 Jy ! Component: 3050 - total flux cleaned = -0.0140216 Jy ! Component: 3100 - total flux cleaned = -0.0142029 Jy ! Component: 3150 - total flux cleaned = -0.0143228 Jy ! Component: 3200 - total flux cleaned = -0.0144422 Jy ! Component: 3250 - total flux cleaned = -0.0146002 Jy ! Component: 3300 - total flux cleaned = -0.014718 Jy ! Component: 3350 - total flux cleaned = -0.0148742 Jy ! Component: 3400 - total flux cleaned = -0.0150486 Jy ! Component: 3450 - total flux cleaned = -0.0152026 Jy ! Component: 3500 - total flux cleaned = -0.0152982 Jy ! Component: 3550 - total flux cleaned = -0.0153934 Jy ! Component: 3600 - total flux cleaned = -0.0155449 Jy ! Component: 3650 - total flux cleaned = -0.0156202 Jy ! Component: 3700 - total flux cleaned = -0.0158073 Jy ! Component: 3750 - total flux cleaned = -0.0159002 Jy ! Component: 3800 - total flux cleaned = -0.0160297 Jy ! Component: 3850 - total flux cleaned = -0.0161216 Jy ! Component: 3900 - total flux cleaned = -0.0162313 Jy ! Component: 3950 - total flux cleaned = -0.016286 Jy ! Component: 4000 - total flux cleaned = -0.0163766 Jy ! Component: 4050 - total flux cleaned = -0.0164667 Jy ! Total flux subtracted in 4096 components = -0.0165206 Jy ! Clean residual min=-0.001157 max=0.001177 Jy/beam ! Clean residual mean=-0.000028 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.162524 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 337 components and 0.162524 Jy ![Exited script file: muppet] wmap "J0646-3903_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.147 x 14.24 at 19.77 degrees (North through East) ! Clean map min=-0.0031121 max=0.13587 Jy/beam ! Writing clean map to FITS file: J0646-3903_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135872 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000327114 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.722257 0.722257 1.44451 2.88903 5.77805 11.5561 23.1122 46.2244 92.4488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.147 x 14.24 at 19.77 degrees (North through East) ! Clean map min=-0.0031121 max=0.13587 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0646-3903_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:06:37 2019