! Started logfile: J0644-3459_S_2017_01_21_pus_uvs.log on Sun May 5 15:48:49 2019 obs J0644-3459_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0644-3459_S_2017_01_21_pus_uva.fits ! AN table 1: 96 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.567708 visibilities/baseline/integration-bin. ! Found source: J0644-3459 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 7848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0644-3459_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630300Jy sigma=0.003506 ! Fit after self-cal, rms=0.593390Jy sigma=0.003300 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=8.239 mas, bpa=5.273 degrees ! Estimated noise=2194.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314834 Jy ! Component: 100 - total flux cleaned = 0.417033 Jy ! Total flux subtracted in 100 components = 0.417033 Jy ! Clean residual min=-0.030003 max=0.051955 Jy/beam ! Clean residual mean=-0.000406 rms=0.010404 Jy/beam ! Combined flux in latest and established models = 0.417033 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.417033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178118Jy sigma=0.001012 ! Fit after self-cal, rms=0.178079Jy sigma=0.001012 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=9.473 mas, bpa=4.913 degrees ! Estimated noise=1560.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792792 Jy ! Component: 100 - total flux cleaned = 0.121097 Jy ! Component: 150 - total flux cleaned = 0.144772 Jy ! Component: 200 - total flux cleaned = 0.158311 Jy ! Total flux subtracted in 200 components = 0.158311 Jy ! Clean residual min=-0.015214 max=0.026999 Jy/beam ! Clean residual mean=-0.000354 rms=0.005074 Jy/beam ! Combined flux in latest and established models = 0.575343 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.575343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146832Jy sigma=0.000751 ! Fit after self-cal, rms=0.146757Jy sigma=0.000750 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.20 LA 1.00 ! MK 0.96 NL 1.02 OV 1.01 PT 0.96 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.29 LA 0.97 ! MK 0.96 NL 1.05 OV 1.05 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 1.25 LA 0.96 ! MK 1.02 NL 1.05 OV 0.93 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.21 LA 1.01 ! MK 0.93 NL 1.00* OV 0.97 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.146757Jy sigma=0.000750 ! Fit after self-cal, rms=0.148941Jy sigma=0.000717 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=9.487 mas, bpa=5.033 degrees ! Estimated noise=1554.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161684 Jy ! Component: 100 - total flux cleaned = 0.0168575 Jy ! Component: 150 - total flux cleaned = 0.0160767 Jy ! Component: 200 - total flux cleaned = 0.0158481 Jy ! Total flux subtracted in 200 components = 0.0158481 Jy ! Clean residual min=-0.012332 max=0.013528 Jy/beam ! Clean residual mean=-0.000047 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 0.591191 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.591191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146776Jy sigma=0.000703 ! Fit after self-cal, rms=0.146846Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146846Jy sigma=0.000701 ! Fit after self-cal, rms=0.143960Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=9.465 mas, bpa=5.133 degrees ! Estimated noise=1542.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657627 Jy ! Component: 100 - total flux cleaned = 0.00659435 Jy ! Component: 150 - total flux cleaned = 0.00659784 Jy ! Component: 200 - total flux cleaned = 0.00645379 Jy ! Total flux subtracted in 200 components = 0.00645379 Jy ! Clean residual min=-0.006990 max=0.008386 Jy/beam ! Clean residual mean=-0.000074 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.597645 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.597645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143426Jy sigma=0.000688 ! Fit after self-cal, rms=0.143384Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, -113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651743 Jy ! Component: 100 - total flux cleaned = 0.0071356 Jy ! Component: 150 - total flux cleaned = 0.00713392 Jy ! Component: 200 - total flux cleaned = 0.00713152 Jy ! Total flux subtracted in 200 components = 0.00713152 Jy ! Clean residual min=-0.005736 max=0.006477 Jy/beam ! Clean residual mean=-0.000019 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.604777 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.604777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142987Jy sigma=0.000685 ! Fit after self-cal, rms=0.142950Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142950Jy sigma=0.000685 ! Fit after self-cal, rms=0.142444Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=9.455 mas, bpa=5.114 degrees ! Estimated noise=1536.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371421 Jy ! Component: 100 - total flux cleaned = 0.00415897 Jy ! Component: 150 - total flux cleaned = 0.00415673 Jy ! Component: 200 - total flux cleaned = 0.0039775 Jy ! Total flux subtracted in 200 components = 0.0039775 Jy ! Clean residual min=-0.004819 max=0.005763 Jy/beam ! Clean residual mean=-0.000016 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.608754 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.608754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142275Jy sigma=0.000683 ! Fit after self-cal, rms=0.142266Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532472 Jy ! Component: 100 - total flux cleaned = 0.000368302 Jy ! Component: 150 - total flux cleaned = 0.000212562 Jy ! Component: 200 - total flux cleaned = 6.36162e-05 Jy ! Total flux subtracted in 200 components = 6.36162e-05 Jy ! Clean residual min=-0.004626 max=0.005296 Jy/beam ! Clean residual mean=-0.000014 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.608818 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 0.608818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142165Jy sigma=0.000683 ! Fit after self-cal, rms=0.142165Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142165Jy sigma=0.000683 ! Fit after self-cal, rms=0.142018Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.639 mas, bmaj=22.29 mas, bpa=-0.09136 degrees ! Estimated noise=1921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028658 Jy ! Component: 100 - total flux cleaned = 0.00313761 Jy ! Component: 150 - total flux cleaned = 0.00308345 Jy ! Component: 200 - total flux cleaned = 0.00303599 Jy ! Total flux subtracted in 200 components = 0.00303599 Jy ! Clean residual min=-0.004579 max=0.005195 Jy/beam ! Clean residual mean=-0.000021 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.611854 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.611854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142003Jy sigma=0.000682 ! Fit after self-cal, rms=0.142004Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416802 Jy ! Component: 100 - total flux cleaned = 0.000314024 Jy ! Component: 150 - total flux cleaned = 0.000225431 Jy ! Component: 200 - total flux cleaned = 0.00026924 Jy ! Total flux subtracted in 200 components = 0.00026924 Jy ! Clean residual min=-0.004485 max=0.005055 Jy/beam ! Clean residual mean=-0.000017 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.612123 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 0.612123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141977Jy sigma=0.000682 ! Fit after self-cal, rms=0.141975Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=9.455 mas, bpa=5.123 degrees ! Estimated noise=1535.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.115 x 9.455 at 5.123 degrees (North through East) ! Clean map min=-0.0057483 max=0.40763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=8.213 mas, bpa=5.517 degrees ! Estimated noise=2175.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.312002 Jy ! Component: 100 - total flux cleaned = 0.416315 Jy ! Component: 150 - total flux cleaned = 0.475344 Jy ! Component: 200 - total flux cleaned = 0.511588 Jy ! Total flux subtracted in 200 components = 0.511588 Jy ! Clean residual min=-0.013654 max=0.018944 Jy/beam ! Clean residual mean=-0.000222 rms=0.004246 Jy/beam ! Combined flux in latest and established models = 0.511588 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.511588 Jy ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=9.455 mas, bpa=5.123 degrees ! Estimated noise=1535.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318537 Jy ! Component: 100 - total flux cleaned = 0.0499368 Jy ! Component: 150 - total flux cleaned = 0.0615688 Jy ! Component: 200 - total flux cleaned = 0.0699773 Jy ! Total flux subtracted in 200 components = 0.0699773 Jy ! Clean residual min=-0.006622 max=0.008768 Jy/beam ! Clean residual mean=-0.000218 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.581565 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 51 components and 0.581565 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.639 mas, bmaj=22.29 mas, bpa=-0.09136 degrees ! Estimated noise=1921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123196 Jy ! Component: 100 - total flux cleaned = 0.0192828 Jy ! Component: 150 - total flux cleaned = 0.0237408 Jy ! Component: 200 - total flux cleaned = 0.0266848 Jy ! Total flux subtracted in 200 components = 0.0266848 Jy ! Clean residual min=-0.004692 max=0.005073 Jy/beam ! Clean residual mean=-0.000090 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.60825 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128902 Jy ! Component: 100 - total flux cleaned = 0.00191935 Jy ! Component: 150 - total flux cleaned = 0.00240053 Jy ! Component: 200 - total flux cleaned = 0.00281804 Jy ! Total flux subtracted in 200 components = 0.00281804 Jy ! Clean residual min=-0.004401 max=0.004728 Jy/beam ! Clean residual mean=-0.000050 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.611068 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.611068 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=9.455 mas, bpa=5.123 degrees ! Estimated noise=1535.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202121 Jy ! Component: 100 - total flux cleaned = -0.00214319 Jy ! Component: 150 - total flux cleaned = -0.00236386 Jy ! Component: 200 - total flux cleaned = -0.00236162 Jy ! Total flux subtracted in 200 components = -0.00236162 Jy ! Clean residual min=-0.004447 max=0.005708 Jy/beam ! Clean residual mean=-0.000036 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.608707 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.608706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141915Jy sigma=0.000683 ! Fit after self-cal, rms=0.141869Jy sigma=0.000682 wmodel J0644-3459_S_2017_01_21_pus_map.mod ! Writing 91 model components to file: J0644-3459_S_2017_01_21_pus_map.mod wobs J0644-3459_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0644-3459_S_2017_01_21_pus_uvs.fits wwins J0644-3459_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0644-3459_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208947 Jy ! Component: 100 - total flux cleaned = 0.00272101 Jy ! Component: 150 - total flux cleaned = 0.00307416 Jy ! Component: 200 - total flux cleaned = 0.00313977 Jy ! Component: 250 - total flux cleaned = 0.00307715 Jy ! Component: 300 - total flux cleaned = 0.00295936 Jy ! Component: 350 - total flux cleaned = 0.0026776 Jy ! Component: 400 - total flux cleaned = 0.00257041 Jy ! Component: 450 - total flux cleaned = 0.00236151 Jy ! Component: 500 - total flux cleaned = 0.0019541 Jy ! Component: 550 - total flux cleaned = 0.00170617 Jy ! Component: 600 - total flux cleaned = 0.00146373 Jy ! Component: 650 - total flux cleaned = 0.00118142 Jy ! Component: 700 - total flux cleaned = 0.000953907 Jy ! Component: 750 - total flux cleaned = 0.000732385 Jy ! Component: 800 - total flux cleaned = 0.000733043 Jy ! Component: 850 - total flux cleaned = 0.000689385 Jy ! Component: 900 - total flux cleaned = 0.000566242 Jy ! Component: 950 - total flux cleaned = 0.000566023 Jy ! Component: 1000 - total flux cleaned = 0.00060441 Jy ! Component: 1050 - total flux cleaned = 0.000527105 Jy ! Component: 1100 - total flux cleaned = 0.000565692 Jy ! Component: 1150 - total flux cleaned = 0.000639861 Jy ! Component: 1200 - total flux cleaned = 0.000420068 Jy ! Component: 1250 - total flux cleaned = 0.000312884 Jy ! Component: 1300 - total flux cleaned = 0.000172189 Jy ! Component: 1350 - total flux cleaned = 6.8021e-05 Jy ! Component: 1400 - total flux cleaned = -0.000137503 Jy ! Component: 1450 - total flux cleaned = -0.000272449 Jy ! Component: 1500 - total flux cleaned = -0.000339153 Jy ! Component: 1550 - total flux cleaned = -0.000502384 Jy ! Component: 1600 - total flux cleaned = -0.000534014 Jy ! Component: 1650 - total flux cleaned = -0.000660731 Jy ! Component: 1700 - total flux cleaned = -0.000722724 Jy ! Component: 1750 - total flux cleaned = -0.00087637 Jy ! Component: 1800 - total flux cleaned = -0.00102801 Jy ! Component: 1850 - total flux cleaned = -0.00123694 Jy ! Component: 1900 - total flux cleaned = -0.00135467 Jy ! Component: 1950 - total flux cleaned = -0.00141304 Jy ! Component: 2000 - total flux cleaned = -0.00167207 Jy ! Component: 2050 - total flux cleaned = -0.00172907 Jy ! Component: 2100 - total flux cleaned = -0.00203848 Jy ! Component: 2150 - total flux cleaned = -0.00217719 Jy ! Component: 2200 - total flux cleaned = -0.00236892 Jy ! Component: 2250 - total flux cleaned = -0.00244977 Jy ! Component: 2300 - total flux cleaned = -0.002664 Jy ! Component: 2350 - total flux cleaned = -0.00271718 Jy ! Component: 2400 - total flux cleaned = -0.00292642 Jy ! Component: 2450 - total flux cleaned = -0.00302989 Jy ! Component: 2500 - total flux cleaned = -0.00313222 Jy ! Component: 2550 - total flux cleaned = -0.00341046 Jy ! Component: 2600 - total flux cleaned = -0.00356062 Jy ! Component: 2650 - total flux cleaned = -0.00378346 Jy ! Component: 2700 - total flux cleaned = -0.00393054 Jy ! Component: 2750 - total flux cleaned = -0.00419705 Jy ! Component: 2800 - total flux cleaned = -0.00438866 Jy ! Component: 2850 - total flux cleaned = -0.00455492 Jy ! Component: 2900 - total flux cleaned = -0.00476677 Jy ! Component: 2950 - total flux cleaned = -0.005023 Jy ! Component: 3000 - total flux cleaned = -0.00525388 Jy ! Component: 3050 - total flux cleaned = -0.00546006 Jy ! Component: 3100 - total flux cleaned = -0.00577721 Jy ! Component: 3150 - total flux cleaned = -0.00595673 Jy ! Component: 3200 - total flux cleaned = -0.00617952 Jy ! Component: 3250 - total flux cleaned = -0.0065102 Jy ! Component: 3300 - total flux cleaned = -0.00670699 Jy ! Component: 3350 - total flux cleaned = -0.00698913 Jy ! Component: 3400 - total flux cleaned = -0.00716131 Jy ! Component: 3450 - total flux cleaned = -0.00746019 Jy ! Component: 3500 - total flux cleaned = -0.00767178 Jy ! Component: 3550 - total flux cleaned = -0.00792366 Jy ! Component: 3600 - total flux cleaned = -0.00809049 Jy ! Component: 3650 - total flux cleaned = -0.00825615 Jy ! Component: 3700 - total flux cleaned = -0.00850281 Jy ! Component: 3750 - total flux cleaned = -0.00876801 Jy ! Component: 3800 - total flux cleaned = -0.00897061 Jy ! Component: 3850 - total flux cleaned = -0.00919207 Jy ! Component: 3900 - total flux cleaned = -0.00945208 Jy ! Component: 3950 - total flux cleaned = -0.00965063 Jy ! Component: 4000 - total flux cleaned = -0.00986769 Jy ! Component: 4050 - total flux cleaned = -0.0100835 Jy ! Total flux subtracted in 4096 components = -0.0102395 Jy ! Clean residual min=-0.001225 max=0.001328 Jy/beam ! Clean residual mean=-0.000009 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.598467 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 359 components and 0.598467 Jy ![Exited script file: muppet] wmap "J0644-3459_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.115 x 9.455 at 5.123 degrees (North through East) ! Clean map min=-0.0030924 max=0.42205 Jy/beam ! Writing clean map to FITS file: J0644-3459_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.422053 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.233909 0.233909 0.467818 0.935635 1.87127 3.74254 7.48508 14.9702 29.9403 59.8807 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.422 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.115 x 9.455 at 5.123 degrees (North through East) ! Clean map min=-0.0030924 max=0.42205 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0644-3459_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:48:54 2019