! Started logfile: J0644+2911_S_2017_05_27_pus_uvs.log on Fri May 3 10:59:02 2019 obs J0644+2911_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0644+2911_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97037 visibilities/baseline/integration-bin. ! Found source: J0644+2911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0644+2911_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 606 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909555Jy sigma=0.052769 ! Fit after self-cal, rms=0.904125Jy sigma=0.052749 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=5.369 mas, bpa=21.3 degrees ! Estimated noise=461.152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031613 Jy ! Component: 100 - total flux cleaned = 0.0389044 Jy ! Total flux subtracted in 100 components = 0.0389044 Jy ! Clean residual min=-0.014570 max=0.018534 Jy/beam ! Clean residual mean=-0.000001 rms=0.004640 Jy/beam ! Combined flux in latest and established models = 0.0389044 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0389044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159866Jy sigma=0.001849 ! Fit after self-cal, rms=0.159841Jy sigma=0.001847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.105 mas, bmaj=5.817 mas, bpa=23.14 degrees ! Estimated noise=363.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187409 Jy ! Component: 100 - total flux cleaned = 0.0309053 Jy ! Component: 150 - total flux cleaned = 0.0398244 Jy ! Component: 200 - total flux cleaned = 0.0452772 Jy ! Total flux subtracted in 200 components = 0.0452772 Jy ! Clean residual min=-0.014683 max=0.017994 Jy/beam ! Clean residual mean=0.000001 rms=0.004530 Jy/beam ! Combined flux in latest and established models = 0.0841816 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.0841816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152417Jy sigma=0.002186 ! Fit after self-cal, rms=0.152234Jy sigma=0.002185 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.50 FD 0.71 HN 0.83 KP 0.83 ! LA 0.77 MK 0.84 NL 0.73 OV 0.88 ! PT 0.83 SC 0.62 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 0.81 KP 0.78 ! LA 0.76 MK 0.78 NL 0.83 OV 0.90 ! PT 0.83 SC 0.64 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 20.01 FD 0.82 HN 0.89 KP 0.87 ! LA 0.83 MK 0.94 NL 0.85 OV 0.88 ! PT 0.82 SC 0.63 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.81 KP 1.00* ! LA 0.80 MK 0.78 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.152234Jy sigma=0.002185 ! Fit after self-cal, rms=1.867754Jy sigma=0.000747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=6.909 mas, bpa=5.84 degrees ! Estimated noise=431.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416399 Jy ! Component: 100 - total flux cleaned = -0.000879817 Jy ! Component: 150 - total flux cleaned = -0.000882826 Jy ! Component: 200 - total flux cleaned = -0.000880594 Jy ! Total flux subtracted in 200 components = -0.000880594 Jy ! Clean residual min=-0.003374 max=0.003574 Jy/beam ! Clean residual mean=0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.083301 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.083301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.867054Jy sigma=0.000731 ! Fit after self-cal, rms=1.867041Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.867041Jy sigma=0.000712 ! Fit after self-cal, rms=0.525849Jy sigma=0.000699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=6.746 mas, bpa=5.266 degrees ! Estimated noise=421.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423862 Jy ! Component: 100 - total flux cleaned = 2.96597e-05 Jy ! Component: 150 - total flux cleaned = -0.000324921 Jy ! Component: 200 - total flux cleaned = -0.000565083 Jy ! Total flux subtracted in 200 components = -0.000565083 Jy ! Clean residual min=-0.002303 max=0.002753 Jy/beam ! Clean residual mean=-0.000002 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0827359 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.0827359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525462Jy sigma=0.000695 ! Fit after self-cal, rms=0.525455Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160817 Jy ! Component: 100 - total flux cleaned = 0.00184932 Jy ! Component: 150 - total flux cleaned = 0.00191669 Jy ! Component: 200 - total flux cleaned = 0.00185077 Jy ! Total flux subtracted in 200 components = 0.00185077 Jy ! Clean residual min=-0.002333 max=0.002443 Jy/beam ! Clean residual mean=-0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0845867 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.0845867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525278Jy sigma=0.000691 ! Fit after self-cal, rms=0.525281Jy sigma=0.000691 ! Inverting map ! Added new window around map position (13.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248448 Jy ! Component: 100 - total flux cleaned = 0.00296104 Jy ! Component: 150 - total flux cleaned = 0.00313929 Jy ! Component: 200 - total flux cleaned = 0.00329758 Jy ! Total flux subtracted in 200 components = 0.00329758 Jy ! Clean residual min=-0.002101 max=0.001802 Jy/beam ! Clean residual mean=-0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0878843 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 78 components and 0.0878843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525129Jy sigma=0.000689 ! Fit after self-cal, rms=0.525125Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525125Jy sigma=0.000689 ! Fit after self-cal, rms=0.059375Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=6.742 mas, bpa=5.772 degrees ! Estimated noise=421.562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100299 Jy ! Component: 100 - total flux cleaned = 0.00139346 Jy ! Component: 150 - total flux cleaned = 0.00154124 Jy ! Component: 200 - total flux cleaned = 0.00167807 Jy ! Total flux subtracted in 200 components = 0.00167807 Jy ! Clean residual min=-0.001654 max=0.001448 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0895623 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.0895624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059283Jy sigma=0.000678 ! Fit after self-cal, rms=0.059250Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432096 Jy ! Component: 100 - total flux cleaned = 0.00047281 Jy ! Component: 150 - total flux cleaned = 0.000627365 Jy ! Component: 200 - total flux cleaned = 0.000736592 Jy ! Total flux subtracted in 200 components = 0.000736592 Jy ! Clean residual min=-0.001501 max=0.001404 Jy/beam ! Clean residual mean=-0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.090299 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 109 components and 0.0902989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059203Jy sigma=0.000677 ! Fit after self-cal, rms=0.059203Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059203Jy sigma=0.000677 ! Fit after self-cal, rms=0.059180Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.427 mas, bmaj=10.24 mas, bpa=-2.355 degrees ! Estimated noise=521.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139732 Jy ! Component: 100 - total flux cleaned = 0.00173971 Jy ! Component: 150 - total flux cleaned = 0.00202297 Jy ! Component: 200 - total flux cleaned = 0.00217832 Jy ! Total flux subtracted in 200 components = 0.00217832 Jy ! Clean residual min=-0.001693 max=0.001417 Jy/beam ! Clean residual mean=-0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0924773 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 130 components and 0.0924773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059155Jy sigma=0.000676 ! Fit after self-cal, rms=0.059146Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330439 Jy ! Component: 100 - total flux cleaned = 0.000475054 Jy ! Component: 150 - total flux cleaned = 0.000501045 Jy ! Component: 200 - total flux cleaned = 0.000551427 Jy ! Total flux subtracted in 200 components = 0.000551427 Jy ! Clean residual min=-0.001620 max=0.001383 Jy/beam ! Clean residual mean=-0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0930287 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.0930287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059129Jy sigma=0.000676 ! Fit after self-cal, rms=0.059126Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=6.754 mas, bpa=6.037 degrees ! Estimated noise=422.217 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.545 x 6.754 at 6.037 degrees (North through East) ! Clean map min=-0.0017097 max=0.059838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=5.703 mas, bpa=5.256 degrees ! Estimated noise=659.614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0459592 Jy ! Component: 100 - total flux cleaned = 0.0585983 Jy ! Component: 150 - total flux cleaned = 0.0649023 Jy ! Component: 200 - total flux cleaned = 0.0688849 Jy ! Total flux subtracted in 200 components = 0.0688849 Jy ! Clean residual min=-0.002550 max=0.002970 Jy/beam ! Clean residual mean=-0.000002 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0688849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0688849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=6.754 mas, bpa=6.037 degrees ! Estimated noise=422.217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504618 Jy ! Component: 100 - total flux cleaned = 0.00848137 Jy ! Component: 150 - total flux cleaned = 0.011048 Jy ! Component: 200 - total flux cleaned = 0.0131291 Jy ! Total flux subtracted in 200 components = 0.0131291 Jy ! Clean residual min=-0.001608 max=0.002084 Jy/beam ! Clean residual mean=-0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0820139 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 77 components and 0.0820139 Jy ! Inverting map ! Added new window around map position (25.5, -42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202243 Jy ! Component: 100 - total flux cleaned = 0.00357557 Jy ! Component: 150 - total flux cleaned = 0.00465585 Jy ! Component: 200 - total flux cleaned = 0.00556119 Jy ! Total flux subtracted in 200 components = 0.00556119 Jy ! Clean residual min=-0.001472 max=0.001524 Jy/beam ! Clean residual mean=-0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0875751 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 113 components and 0.0875751 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.427 mas, bmaj=10.24 mas, bpa=-2.355 degrees ! Estimated noise=521.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182717 Jy ! Component: 100 - total flux cleaned = 0.00314343 Jy ! Component: 150 - total flux cleaned = 0.00371723 Jy ! Component: 200 - total flux cleaned = 0.00409255 Jy ! Total flux subtracted in 200 components = 0.00409255 Jy ! Clean residual min=-0.001484 max=0.001385 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0916677 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358881 Jy ! Component: 100 - total flux cleaned = 0.000722795 Jy ! Component: 150 - total flux cleaned = 0.000944977 Jy ! Component: 200 - total flux cleaned = 0.00114255 Jy ! Total flux subtracted in 200 components = 0.00114255 Jy ! Clean residual min=-0.001413 max=0.001253 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0928102 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 192 components and 0.0928102 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=6.754 mas, bpa=6.037 degrees ! Estimated noise=422.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.33532e-05 Jy ! Component: 100 - total flux cleaned = -8.51886e-06 Jy ! Component: 150 - total flux cleaned = 8.91586e-05 Jy ! Component: 200 - total flux cleaned = 0.000200655 Jy ! Total flux subtracted in 200 components = 0.000200655 Jy ! Clean residual min=-0.001353 max=0.001106 Jy/beam ! Clean residual mean=-0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.0930109 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 209 components and 0.0930109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059057Jy sigma=0.000674 ! Fit after self-cal, rms=0.059042Jy sigma=0.000674 wmodel J0644+2911_S_2017_05_27_pus_map.mod ! Writing 209 model components to file: J0644+2911_S_2017_05_27_pus_map.mod wobs J0644+2911_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0644+2911_S_2017_05_27_pus_uvs.fits wwins J0644+2911_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0644+2911_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573931 Jy ! Component: 100 - total flux cleaned = -0.00080391 Jy ! Component: 150 - total flux cleaned = -0.000942909 Jy ! Component: 200 - total flux cleaned = -0.00101935 Jy ! Component: 250 - total flux cleaned = -0.00107494 Jy ! Component: 300 - total flux cleaned = -0.00107468 Jy ! Component: 350 - total flux cleaned = -0.0011097 Jy ! Component: 400 - total flux cleaned = -0.0011267 Jy ! Component: 450 - total flux cleaned = -0.00121184 Jy ! Component: 500 - total flux cleaned = -0.00126178 Jy ! Component: 550 - total flux cleaned = -0.00127811 Jy ! Component: 600 - total flux cleaned = -0.00131027 Jy ! Component: 650 - total flux cleaned = -0.00134229 Jy ! Component: 700 - total flux cleaned = -0.00137394 Jy ! Component: 750 - total flux cleaned = -0.00138943 Jy ! Component: 800 - total flux cleaned = -0.00140501 Jy ! Component: 850 - total flux cleaned = -0.00146624 Jy ! Component: 900 - total flux cleaned = -0.00143618 Jy ! Component: 950 - total flux cleaned = -0.00148099 Jy ! Component: 1000 - total flux cleaned = -0.00151061 Jy ! Component: 1050 - total flux cleaned = -0.00155412 Jy ! Component: 1100 - total flux cleaned = -0.00152506 Jy ! Component: 1150 - total flux cleaned = -0.00155346 Jy ! Component: 1200 - total flux cleaned = -0.00153932 Jy ! Component: 1250 - total flux cleaned = -0.00156749 Jy ! Component: 1300 - total flux cleaned = -0.00156739 Jy ! Component: 1350 - total flux cleaned = -0.00155375 Jy ! Component: 1400 - total flux cleaned = -0.00156746 Jy ! Component: 1450 - total flux cleaned = -0.00158101 Jy ! Component: 1500 - total flux cleaned = -0.00155437 Jy ! Component: 1550 - total flux cleaned = -0.00156749 Jy ! Component: 1600 - total flux cleaned = -0.00159375 Jy ! Component: 1650 - total flux cleaned = -0.00161978 Jy ! Component: 1700 - total flux cleaned = -0.00163247 Jy ! Component: 1750 - total flux cleaned = -0.00164506 Jy ! Component: 1800 - total flux cleaned = -0.0016324 Jy ! Component: 1850 - total flux cleaned = -0.00163241 Jy ! Component: 1900 - total flux cleaned = -0.00163262 Jy ! Component: 1950 - total flux cleaned = -0.00170669 Jy ! Component: 2000 - total flux cleaned = -0.00179218 Jy ! Component: 2050 - total flux cleaned = -0.00179208 Jy ! Component: 2100 - total flux cleaned = -0.00181622 Jy ! Component: 2150 - total flux cleaned = -0.00186404 Jy ! Component: 2200 - total flux cleaned = -0.00189969 Jy ! Component: 2250 - total flux cleaned = -0.00195827 Jy ! Component: 2300 - total flux cleaned = -0.00195824 Jy ! Component: 2350 - total flux cleaned = -0.00203925 Jy ! Component: 2400 - total flux cleaned = -0.00206216 Jy ! Component: 2450 - total flux cleaned = -0.00207336 Jy ! Component: 2500 - total flux cleaned = -0.00210734 Jy ! Component: 2550 - total flux cleaned = -0.00215247 Jy ! Component: 2600 - total flux cleaned = -0.00215249 Jy ! Component: 2650 - total flux cleaned = -0.00217477 Jy ! Component: 2700 - total flux cleaned = -0.00220772 Jy ! Component: 2750 - total flux cleaned = -0.00218599 Jy ! Component: 2800 - total flux cleaned = -0.00224037 Jy ! Component: 2850 - total flux cleaned = -0.00226196 Jy ! Component: 2900 - total flux cleaned = -0.00230478 Jy ! Component: 2950 - total flux cleaned = -0.00230475 Jy ! Component: 3000 - total flux cleaned = -0.00229412 Jy ! Component: 3050 - total flux cleaned = -0.00235707 Jy ! Component: 3100 - total flux cleaned = -0.00232577 Jy ! Component: 3150 - total flux cleaned = -0.00232579 Jy ! Component: 3200 - total flux cleaned = -0.00236707 Jy ! Component: 3250 - total flux cleaned = -0.00235691 Jy ! Component: 3300 - total flux cleaned = -0.0023569 Jy ! Component: 3350 - total flux cleaned = -0.00240751 Jy ! Component: 3400 - total flux cleaned = -0.00238748 Jy ! Component: 3450 - total flux cleaned = -0.00237754 Jy ! Component: 3500 - total flux cleaned = -0.00237751 Jy ! Component: 3550 - total flux cleaned = -0.00238748 Jy ! Component: 3600 - total flux cleaned = -0.00241677 Jy ! Component: 3650 - total flux cleaned = -0.00241682 Jy ! Component: 3700 - total flux cleaned = -0.00239752 Jy ! Component: 3750 - total flux cleaned = -0.0024167 Jy ! Component: 3800 - total flux cleaned = -0.00242634 Jy ! Component: 3850 - total flux cleaned = -0.0024074 Jy ! Component: 3900 - total flux cleaned = -0.00242615 Jy ! Component: 3950 - total flux cleaned = -0.00238854 Jy ! Component: 4000 - total flux cleaned = -0.00241659 Jy ! Component: 4050 - total flux cleaned = -0.00241665 Jy ! Total flux subtracted in 4096 components = -0.00238898 Jy ! Clean residual min=-0.000528 max=0.000512 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0906219 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 498 components and 0.090622 Jy ![Exited script file: muppet] wmap "J0644+2911_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.545 x 6.754 at 6.037 degrees (North through East) ! Clean map min=-0.0011578 max=0.06104 Jy/beam ! Writing clean map to FITS file: J0644+2911_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0610396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169614 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.833624 0.833624 1.66725 3.3345 6.66899 13.338 26.676 53.3519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.545 x 6.754 at 6.037 degrees (North through East) ! Clean map min=-0.0011578 max=0.06104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0644+2911_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:59:08 2019