! Started logfile: J0642+8811_S_2017_04_28_pus_uvs.log on Thu May 2 16:19:06 2019 obs J0642+8811_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0642+8811_S_2017_04_28_pus_uva.fits ! AN table 1: 194 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.732302 visibilities/baseline/integration-bin. ! Found source: J0642+8811 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 25572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0642+8811_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 491 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1055 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906537Jy sigma=0.007114 ! Fit after self-cal, rms=0.893099Jy sigma=0.007000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=3.346 mas, bpa=-22.12 degrees ! Estimated noise=1086.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0926132 Jy ! Component: 100 - total flux cleaned = 0.11741 Jy ! Total flux subtracted in 100 components = 0.11741 Jy ! Clean residual min=-0.013962 max=0.014902 Jy/beam ! Clean residual mean=0.000023 rms=0.007597 Jy/beam ! Combined flux in latest and established models = 0.11741 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.11741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145986Jy sigma=0.001197 ! Fit after self-cal, rms=0.145993Jy sigma=0.001197 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=4.181 mas, bpa=-81.72 degrees ! Estimated noise=632.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928996 Jy ! Component: 100 - total flux cleaned = 0.0140732 Jy ! Component: 150 - total flux cleaned = 0.0167024 Jy ! Component: 200 - total flux cleaned = 0.0181569 Jy ! Total flux subtracted in 200 components = 0.0181569 Jy ! Clean residual min=-0.009973 max=0.010214 Jy/beam ! Clean residual mean=0.000010 rms=0.005025 Jy/beam ! Combined flux in latest and established models = 0.135567 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.135567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145488Jy sigma=0.001193 ! Fit after self-cal, rms=0.145506Jy sigma=0.001192 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.20 HN 1.07 KP 1.12 ! LA 1.12 MK 1.09 NL 1.02 OV 0.74 ! PT 0.81 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.09 KP 0.99 ! LA 1.03 MK 0.94 NL 1.13 OV 1.20 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.86 FD 1.89 HN 1.72 KP 1.85 ! LA 1.77 MK 1.76 NL 1.73 OV 0.40 ! PT 0.44 SC 1.60 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.95 KP 1.00* ! LA 1.02 MK 0.89 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.145506Jy sigma=0.001192 ! Fit after self-cal, rms=0.198634Jy sigma=0.001134 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.13 mas, bmaj=4.304 mas, bpa=-87.57 degrees ! Estimated noise=699.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813451 Jy ! Component: 100 - total flux cleaned = 0.00800979 Jy ! Component: 150 - total flux cleaned = 0.00766355 Jy ! Component: 200 - total flux cleaned = 0.00725824 Jy ! Total flux subtracted in 200 components = 0.00725824 Jy ! Clean residual min=-0.012181 max=0.013674 Jy/beam ! Clean residual mean=-0.000044 rms=0.004465 Jy/beam ! Combined flux in latest and established models = 0.142825 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.142825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196421Jy sigma=0.001137 ! Fit after self-cal, rms=0.199720Jy sigma=0.001133 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199720Jy sigma=0.001133 ! Fit after self-cal, rms=1.237177Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=4.4 mas, bpa=-32.94 degrees ! Estimated noise=744.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627347 Jy ! Component: 100 - total flux cleaned = 0.00610442 Jy ! Component: 150 - total flux cleaned = 0.00598503 Jy ! Component: 200 - total flux cleaned = 0.00578639 Jy ! Total flux subtracted in 200 components = 0.00578639 Jy ! Clean residual min=-0.003518 max=0.010189 Jy/beam ! Clean residual mean=-0.000017 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.148612 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.148612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235489Jy sigma=0.000769 ! Fit after self-cal, rms=1.242138Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87.5, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681406 Jy ! Component: 100 - total flux cleaned = 0.00699154 Jy ! Component: 150 - total flux cleaned = 0.0069905 Jy ! Component: 200 - total flux cleaned = 0.00700144 Jy ! Total flux subtracted in 200 components = 0.00700144 Jy ! Clean residual min=-0.004129 max=0.007544 Jy/beam ! Clean residual mean=-0.000009 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.155613 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.155613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.241336Jy sigma=0.000759 ! Fit after self-cal, rms=1.241115Jy sigma=0.000757 ! Inverting map ! Added new window around map position (41, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593646 Jy ! Component: 100 - total flux cleaned = 0.00699074 Jy ! Component: 150 - total flux cleaned = 0.00733902 Jy ! Component: 200 - total flux cleaned = 0.00743646 Jy ! Total flux subtracted in 200 components = 0.00743646 Jy ! Clean residual min=-0.003885 max=0.007315 Jy/beam ! Clean residual mean=-0.000005 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.16305 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.16305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.240219Jy sigma=0.000757 ! Fit after self-cal, rms=1.239980Jy sigma=0.000756 ! Inverting map ! Added new window around map position (-112.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587608 Jy ! Component: 100 - total flux cleaned = 0.00737525 Jy ! Component: 150 - total flux cleaned = 0.00823458 Jy ! Component: 200 - total flux cleaned = 0.00866663 Jy ! Total flux subtracted in 200 components = 0.00866663 Jy ! Clean residual min=-0.003639 max=0.006159 Jy/beam ! Clean residual mean=-0.000003 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.171716 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.171716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.239217Jy sigma=0.000757 ! Fit after self-cal, rms=1.238890Jy sigma=0.000756 ! Inverting map ! Added new window around map position (-70, 50.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464487 Jy ! Component: 100 - total flux cleaned = 0.00597437 Jy ! Component: 150 - total flux cleaned = 0.00619918 Jy ! Component: 200 - total flux cleaned = 0.00620111 Jy ! Total flux subtracted in 200 components = 0.00620111 Jy ! Clean residual min=-0.003895 max=0.005612 Jy/beam ! Clean residual mean=-0.000004 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.177917 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 0.177917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.238343Jy sigma=0.000757 ! Fit after self-cal, rms=1.238112Jy sigma=0.000757 ! Inverting map ! Added new window around map position (-46.5, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452839 Jy ! Component: 100 - total flux cleaned = 0.0061896 Jy ! Component: 150 - total flux cleaned = 0.00640399 Jy ! Component: 200 - total flux cleaned = 0.00660707 Jy ! Total flux subtracted in 200 components = 0.00660707 Jy ! Clean residual min=-0.003916 max=0.005720 Jy/beam ! Clean residual mean=-0.000004 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.184524 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.184524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.237516Jy sigma=0.000758 ! Fit after self-cal, rms=1.237448Jy sigma=0.000758 ! Inverting map ! Added new window around map position (2.5, 50.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296027 Jy ! Component: 100 - total flux cleaned = 0.00391785 Jy ! Component: 150 - total flux cleaned = 0.00507719 Jy ! Component: 200 - total flux cleaned = 0.0055661 Jy ! Total flux subtracted in 200 components = 0.0055661 Jy ! Clean residual min=-0.003887 max=0.005357 Jy/beam ! Clean residual mean=-0.000004 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.190091 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 169 components and 0.190091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.237049Jy sigma=0.000758 ! Fit after self-cal, rms=1.236917Jy sigma=0.000757 ! Inverting map ! Added new window around map position (127.5, 73.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032101 Jy ! Component: 100 - total flux cleaned = 0.00461606 Jy ! Component: 150 - total flux cleaned = 0.00609764 Jy ! Component: 200 - total flux cleaned = 0.00704279 Jy ! Total flux subtracted in 200 components = 0.00704279 Jy ! Clean residual min=-0.003415 max=0.004699 Jy/beam ! Clean residual mean=-0.000003 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.197133 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 192 components and 0.197133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.236410Jy sigma=0.000756 ! Fit after self-cal, rms=1.236258Jy sigma=0.000756 ! Inverting map ! Added new window around map position (-49.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004028 Jy ! Component: 100 - total flux cleaned = 0.00448976 Jy ! Component: 150 - total flux cleaned = 0.00480139 Jy ! Component: 200 - total flux cleaned = 0.00519362 Jy ! Total flux subtracted in 200 components = 0.00519362 Jy ! Clean residual min=-0.003484 max=0.004769 Jy/beam ! Clean residual mean=-0.000005 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.202327 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 213 components and 0.202327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235838Jy sigma=0.000756 ! Fit after self-cal, rms=1.235633Jy sigma=0.000756 ! Inverting map ! Added new window around map position (46.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402596 Jy ! Component: 100 - total flux cleaned = 0.00574675 Jy ! Component: 150 - total flux cleaned = 0.00657504 Jy ! Component: 200 - total flux cleaned = 0.00715039 Jy ! Total flux subtracted in 200 components = 0.00715039 Jy ! Clean residual min=-0.003280 max=0.004806 Jy/beam ! Clean residual mean=-0.000006 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.209477 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 238 components and 0.209477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235129Jy sigma=0.000757 ! Fit after self-cal, rms=1.234953Jy sigma=0.000756 ! Inverting map ! Added new window around map position (-41, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363985 Jy ! Component: 100 - total flux cleaned = 0.00445209 Jy ! Component: 150 - total flux cleaned = 0.004759 Jy ! Component: 200 - total flux cleaned = 0.00525197 Jy ! Total flux subtracted in 200 components = 0.00525197 Jy ! Clean residual min=-0.003304 max=0.004154 Jy/beam ! Clean residual mean=-0.000005 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.214729 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 250 components and 0.214729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.234353Jy sigma=0.000755 ! Fit after self-cal, rms=1.234164Jy sigma=0.000755 ! Inverting map ! Added new window around map position (-124, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360029 Jy ! Component: 100 - total flux cleaned = 0.00519196 Jy ! Component: 150 - total flux cleaned = 0.00607998 Jy ! Component: 200 - total flux cleaned = 0.00645761 Jy ! Total flux subtracted in 200 components = 0.00645761 Jy ! Clean residual min=-0.003561 max=0.004112 Jy/beam ! Clean residual mean=-0.000005 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.221187 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 266 components and 0.221187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.233737Jy sigma=0.000755 ! Fit after self-cal, rms=1.233659Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.233659Jy sigma=0.000754 ! Fit after self-cal, rms=0.739416Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.059 mas, bmaj=4.45 mas, bpa=-30.28 degrees ! Estimated noise=757.279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546132 Jy ! Component: 100 - total flux cleaned = 0.00980899 Jy ! Component: 150 - total flux cleaned = 0.0137606 Jy ! Component: 200 - total flux cleaned = 0.0172916 Jy ! Total flux subtracted in 200 components = 0.0172916 Jy ! Clean residual min=-0.004129 max=0.005666 Jy/beam ! Clean residual mean=-0.000006 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.238479 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 285 components and 0.238479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.738349Jy sigma=0.000744 ! Fit after self-cal, rms=0.736476Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (113, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569018 Jy ! Component: 100 - total flux cleaned = 0.00956862 Jy ! Component: 150 - total flux cleaned = 0.0116965 Jy ! Component: 200 - total flux cleaned = 0.0130462 Jy ! Total flux subtracted in 200 components = 0.0130462 Jy ! Clean residual min=-0.004063 max=0.005784 Jy/beam ! Clean residual mean=-0.000007 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.251525 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 301 components and 0.251525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735510Jy sigma=0.000744 ! Fit after self-cal, rms=0.734962Jy sigma=0.000744 ! Inverting map ! Added new window around map position (-85.5, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544935 Jy ! Component: 100 - total flux cleaned = 0.00861043 Jy ! Component: 150 - total flux cleaned = 0.0108213 Jy ! Component: 200 - total flux cleaned = 0.0128982 Jy ! Total flux subtracted in 200 components = 0.0128982 Jy ! Clean residual min=-0.004240 max=0.005276 Jy/beam ! Clean residual mean=-0.000004 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.264423 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 311 components and 0.264423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.734007Jy sigma=0.000745 ! Fit after self-cal, rms=0.733605Jy sigma=0.000745 ! Inverting map ! Added new window around map position (71, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470346 Jy ! Component: 100 - total flux cleaned = 0.00729309 Jy ! Component: 150 - total flux cleaned = 0.0093506 Jy ! Component: 200 - total flux cleaned = 0.0109515 Jy ! Total flux subtracted in 200 components = 0.0109515 Jy ! Clean residual min=-0.004086 max=0.004874 Jy/beam ! Clean residual mean=-0.000005 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.275375 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 323 components and 0.275375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732839Jy sigma=0.000745 ! Fit after self-cal, rms=0.732555Jy sigma=0.000745 ! Inverting map ! Added new window around map position (-126, -72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388065 Jy ! Component: 100 - total flux cleaned = 0.00591171 Jy ! Component: 150 - total flux cleaned = 0.00715504 Jy ! Component: 200 - total flux cleaned = 0.00809472 Jy ! Total flux subtracted in 200 components = 0.00809472 Jy ! Clean residual min=-0.003706 max=0.004803 Jy/beam ! Clean residual mean=-0.000004 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.283469 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 345 components and 0.283469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.731862Jy sigma=0.000743 ! Fit after self-cal, rms=0.731548Jy sigma=0.000743 ! Inverting map ! Added new window around map position (40, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403914 Jy ! Component: 100 - total flux cleaned = 0.00551712 Jy ! Component: 150 - total flux cleaned = 0.00632339 Jy ! Component: 200 - total flux cleaned = 0.00687558 Jy ! Total flux subtracted in 200 components = 0.00687558 Jy ! Clean residual min=-0.003587 max=0.004361 Jy/beam ! Clean residual mean=-0.000009 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.290345 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 364 components and 0.290345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730849Jy sigma=0.000743 ! Fit after self-cal, rms=0.730611Jy sigma=0.000742 ! Inverting map ! Added new window around map position (85, -55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040826 Jy ! Component: 100 - total flux cleaned = 0.00604983 Jy ! Component: 150 - total flux cleaned = 0.00704666 Jy ! Component: 200 - total flux cleaned = 0.00812281 Jy ! Total flux subtracted in 200 components = 0.00812281 Jy ! Clean residual min=-0.003664 max=0.004224 Jy/beam ! Clean residual mean=-0.000008 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.298468 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 383 components and 0.298468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729923Jy sigma=0.000743 ! Fit after self-cal, rms=0.729711Jy sigma=0.000743 ! Inverting map ! Added new window around map position (-38, -126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391642 Jy ! Component: 100 - total flux cleaned = 0.00547854 Jy ! Component: 150 - total flux cleaned = 0.00643142 Jy ! Component: 200 - total flux cleaned = 0.00736532 Jy ! Total flux subtracted in 200 components = 0.00736532 Jy ! Clean residual min=-0.003630 max=0.004059 Jy/beam ! Clean residual mean=-0.000007 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.305833 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 405 components and 0.305833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729055Jy sigma=0.000742 ! Fit after self-cal, rms=0.728881Jy sigma=0.000742 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.728881Jy sigma=0.000742 ! Fit after self-cal, rms=0.406788Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.77 mas, bmaj=9.426 mas, bpa=-77.2 degrees ! Estimated noise=923.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335021 Jy ! Component: 100 - total flux cleaned = 0.00552293 Jy ! Component: 150 - total flux cleaned = 0.00774382 Jy ! Component: 200 - total flux cleaned = 0.00980353 Jy ! Total flux subtracted in 200 components = 0.00980353 Jy ! Clean residual min=-0.004269 max=0.004876 Jy/beam ! Clean residual mean=-0.000001 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.315637 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 454 components and 0.315637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406401Jy sigma=0.000736 ! Fit after self-cal, rms=0.403723Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308914 Jy ! Component: 100 - total flux cleaned = 0.0047027 Jy ! Component: 150 - total flux cleaned = 0.00631976 Jy ! Component: 200 - total flux cleaned = 0.00805608 Jy ! Total flux subtracted in 200 components = 0.00805608 Jy ! Clean residual min=-0.004342 max=0.004929 Jy/beam ! Clean residual mean=-0.000006 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.323693 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 481 components and 0.323693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403323Jy sigma=0.000735 ! Fit after self-cal, rms=0.403110Jy sigma=0.000735 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.442 mas, bpa=-29.89 degrees ! Estimated noise=765.157 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.442 at -29.89 degrees (North through East) ! Clean map min=-0.0064661 max=0.14609 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=3.684 mas, bpa=-20.59 degrees ! Estimated noise=1292.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107839 Jy ! Component: 100 - total flux cleaned = 0.13698 Jy ! Component: 150 - total flux cleaned = 0.155439 Jy ! Component: 200 - total flux cleaned = 0.170714 Jy ! Total flux subtracted in 200 components = 0.170714 Jy ! Clean residual min=-0.008922 max=0.012815 Jy/beam ! Clean residual mean=0.000005 rms=0.002851 Jy/beam ! Combined flux in latest and established models = 0.170714 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.170714 Jy ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.442 mas, bpa=-29.89 degrees ! Estimated noise=765.157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-73, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013888 Jy ! Component: 100 - total flux cleaned = 0.0253923 Jy ! Component: 150 - total flux cleaned = 0.0357077 Jy ! Component: 200 - total flux cleaned = 0.0452727 Jy ! Total flux subtracted in 200 components = 0.0452727 Jy ! Clean residual min=-0.005139 max=0.008425 Jy/beam ! Clean residual mean=0.000016 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.215987 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 69 components and 0.215987 Jy ! Inverting map ! Added new window around map position (26.5, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00943316 Jy ! Component: 100 - total flux cleaned = 0.0178749 Jy ! Component: 150 - total flux cleaned = 0.0255501 Jy ! Component: 200 - total flux cleaned = 0.032249 Jy ! Total flux subtracted in 200 components = 0.032249 Jy ! Clean residual min=-0.004913 max=0.007233 Jy/beam ! Clean residual mean=0.000009 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.248235 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 100 components and 0.248235 Jy ! Inverting map ! Added new window around map position (73, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753644 Jy ! Component: 100 - total flux cleaned = 0.0136727 Jy ! Component: 150 - total flux cleaned = 0.0192664 Jy ! Component: 200 - total flux cleaned = 0.0243684 Jy ! Total flux subtracted in 200 components = 0.0243684 Jy ! Clean residual min=-0.004334 max=0.006315 Jy/beam ! Clean residual mean=0.000009 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.272604 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 129 components and 0.272604 Jy ! Inverting map ! Added new window around map position (-117, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522128 Jy ! Component: 100 - total flux cleaned = 0.00950354 Jy ! Component: 150 - total flux cleaned = 0.0136179 Jy ! Component: 200 - total flux cleaned = 0.0175778 Jy ! Total flux subtracted in 200 components = 0.0175778 Jy ! Clean residual min=-0.004199 max=0.005218 Jy/beam ! Clean residual mean=0.000008 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.290182 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 159 components and 0.290182 Jy ! Inverting map ! Added new window around map position (111.5, -53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418324 Jy ! Component: 100 - total flux cleaned = 0.00769198 Jy ! Component: 150 - total flux cleaned = 0.0110757 Jy ! Component: 200 - total flux cleaned = 0.0141505 Jy ! Total flux subtracted in 200 components = 0.0141505 Jy ! Clean residual min=-0.004196 max=0.004896 Jy/beam ! Clean residual mean=0.000006 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.304332 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 184 components and 0.304332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.77 mas, bmaj=9.426 mas, bpa=-77.2 degrees ! Estimated noise=923.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476715 Jy ! Component: 100 - total flux cleaned = 0.00727507 Jy ! Component: 150 - total flux cleaned = 0.00973992 Jy ! Component: 200 - total flux cleaned = 0.0123574 Jy ! Total flux subtracted in 200 components = 0.0123574 Jy ! Clean residual min=-0.004510 max=0.005326 Jy/beam ! Clean residual mean=0.000007 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.31669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292484 Jy ! Component: 100 - total flux cleaned = 0.00525996 Jy ! Component: 150 - total flux cleaned = 0.00720681 Jy ! Component: 200 - total flux cleaned = 0.00868204 Jy ! Total flux subtracted in 200 components = 0.00868204 Jy ! Clean residual min=-0.004133 max=0.005054 Jy/beam ! Clean residual mean=0.000005 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.325372 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 238 components and 0.325372 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=4.442 mas, bpa=-29.89 degrees ! Estimated noise=765.157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324744 Jy ! Component: 100 - total flux cleaned = 0.00598958 Jy ! Component: 150 - total flux cleaned = 0.00824628 Jy ! Component: 200 - total flux cleaned = 0.00947703 Jy ! Total flux subtracted in 200 components = 0.00947703 Jy ! Clean residual min=-0.003547 max=0.004304 Jy/beam ! Clean residual mean=0.000002 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.334849 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 266 components and 0.334849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404512Jy sigma=0.000737 ! Fit after self-cal, rms=0.404376Jy sigma=0.000736 wmodel J0642+8811_S_2017_04_28_pus_map.mod ! Writing 266 model components to file: J0642+8811_S_2017_04_28_pus_map.mod wobs J0642+8811_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0642+8811_S_2017_04_28_pus_uvs.fits wwins J0642+8811_S_2017_04_28_pus_map.win ! wwins: Wrote 24 windows to J0642+8811_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200891 Jy ! Component: 100 - total flux cleaned = 0.00386101 Jy ! Component: 150 - total flux cleaned = 0.00563129 Jy ! Component: 200 - total flux cleaned = 0.00727762 Jy ! Component: 250 - total flux cleaned = 0.00874726 Jy ! Component: 300 - total flux cleaned = 0.00999023 Jy ! Component: 350 - total flux cleaned = 0.0112089 Jy ! Component: 400 - total flux cleaned = 0.0124695 Jy ! Component: 450 - total flux cleaned = 0.0133997 Jy ! Component: 500 - total flux cleaned = 0.0146236 Jy ! Component: 550 - total flux cleaned = 0.0157092 Jy ! Component: 600 - total flux cleaned = 0.016722 Jy ! Component: 650 - total flux cleaned = 0.0178403 Jy ! Component: 700 - total flux cleaned = 0.0188296 Jy ! Component: 750 - total flux cleaned = 0.0199225 Jy ! Component: 800 - total flux cleaned = 0.0209468 Jy ! Component: 850 - total flux cleaned = 0.0220161 Jy ! Component: 900 - total flux cleaned = 0.0230734 Jy ! Component: 950 - total flux cleaned = 0.0240097 Jy ! Component: 1000 - total flux cleaned = 0.0249915 Jy ! Component: 1050 - total flux cleaned = 0.0259101 Jy ! Component: 1100 - total flux cleaned = 0.0267664 Jy ! Component: 1150 - total flux cleaned = 0.0277216 Jy ! Component: 1200 - total flux cleaned = 0.028459 Jy ! Component: 1250 - total flux cleaned = 0.029504 Jy ! Component: 1300 - total flux cleaned = 0.0303851 Jy ! Component: 1350 - total flux cleaned = 0.0314142 Jy ! Component: 1400 - total flux cleaned = 0.0322313 Jy ! Component: 1450 - total flux cleaned = 0.0329923 Jy ! Component: 1500 - total flux cleaned = 0.033899 Jy ! Component: 1550 - total flux cleaned = 0.0346495 Jy ! Component: 1600 - total flux cleaned = 0.0355938 Jy ! Component: 1650 - total flux cleaned = 0.0363836 Jy ! Component: 1700 - total flux cleaned = 0.0371198 Jy ! Component: 1750 - total flux cleaned = 0.0380953 Jy ! Component: 1800 - total flux cleaned = 0.0389196 Jy ! Component: 1850 - total flux cleaned = 0.0396427 Jy ! Component: 1900 - total flux cleaned = 0.0404576 Jy ! Component: 1950 - total flux cleaned = 0.0413153 Jy ! Component: 2000 - total flux cleaned = 0.042073 Jy ! Component: 2050 - total flux cleaned = 0.0429208 Jy ! Component: 2100 - total flux cleaned = 0.0437172 Jy ! Component: 2150 - total flux cleaned = 0.0446021 Jy ! Component: 2200 - total flux cleaned = 0.0452965 Jy ! Component: 2250 - total flux cleaned = 0.0461721 Jy ! Component: 2300 - total flux cleaned = 0.046768 Jy ! Component: 2350 - total flux cleaned = 0.047634 Jy ! Component: 2400 - total flux cleaned = 0.0483138 Jy ! Component: 2450 - total flux cleaned = 0.0490803 Jy ! Component: 2500 - total flux cleaned = 0.0497532 Jy ! Component: 2550 - total flux cleaned = 0.0505125 Jy ! Component: 2600 - total flux cleaned = 0.0512236 Jy ! Component: 2650 - total flux cleaned = 0.0520196 Jy ! Component: 2700 - total flux cleaned = 0.0525919 Jy ! Component: 2750 - total flux cleaned = 0.0534246 Jy ! Component: 2800 - total flux cleaned = 0.0540353 Jy ! Component: 2850 - total flux cleaned = 0.0548607 Jy ! Component: 2900 - total flux cleaned = 0.0554232 Jy ! Component: 2950 - total flux cleaned = 0.0561984 Jy ! Component: 3000 - total flux cleaned = 0.0569703 Jy ! Component: 3050 - total flux cleaned = 0.0576109 Jy ! Component: 3100 - total flux cleaned = 0.058334 Jy ! Component: 3150 - total flux cleaned = 0.0590964 Jy ! Component: 3200 - total flux cleaned = 0.0598133 Jy ! Component: 3250 - total flux cleaned = 0.0603594 Jy ! Component: 3300 - total flux cleaned = 0.0610287 Jy ! Component: 3350 - total flux cleaned = 0.0617788 Jy ! Component: 3400 - total flux cleaned = 0.0625259 Jy ! Component: 3450 - total flux cleaned = 0.0632286 Jy ! Component: 3500 - total flux cleaned = 0.0640109 Jy ! Component: 3550 - total flux cleaned = 0.0646672 Jy ! Component: 3600 - total flux cleaned = 0.065321 Jy ! Component: 3650 - total flux cleaned = 0.066013 Jy ! Component: 3700 - total flux cleaned = 0.0667835 Jy ! Component: 3750 - total flux cleaned = 0.0675509 Jy ! Component: 3800 - total flux cleaned = 0.0680738 Jy ! Component: 3850 - total flux cleaned = 0.068876 Jy ! Component: 3900 - total flux cleaned = 0.0695152 Jy ! Component: 3950 - total flux cleaned = 0.0702317 Jy ! Component: 4000 - total flux cleaned = 0.0709061 Jy ! Component: 4050 - total flux cleaned = 0.0714988 Jy ! Total flux subtracted in 4096 components = 0.0721684 Jy ! Clean residual min=-0.002049 max=0.002289 Jy/beam ! Clean residual mean=-0.000004 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.407017 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 559 components and 0.407017 Jy ![Exited script file: muppet] wmap "J0642+8811_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.442 at -29.89 degrees (North through East) ! Clean map min=-0.0049299 max=0.14699 Jy/beam ! Writing clean map to FITS file: J0642+8811_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000711849 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4529 1.4529 2.9058 5.8116 11.6232 23.2464 46.4928 92.9856 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.074 x 4.442 at -29.89 degrees (North through East) ! Clean map min=-0.0049299 max=0.14699 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0642+8811_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:19:15 2019