! Started logfile: J0642+1128_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:34 2019 obs J0642+1128_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0642+1128_S_2017_09_26_pus_uva.fits ! AN table 1: 250 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.301222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0642+1128 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 10844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0642+1128_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1364 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1664 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982967Jy sigma=0.009084 ! Fit after self-cal, rms=0.952888Jy sigma=0.008849 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=14.72 mas, bpa=-12.43 degrees ! Estimated noise=1884.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036313 Jy ! Component: 100 - total flux cleaned = 0.0465351 Jy ! Total flux subtracted in 100 components = 0.0465351 Jy ! Clean residual min=-0.006898 max=0.009697 Jy/beam ! Clean residual mean=0.000019 rms=0.002607 Jy/beam ! Combined flux in latest and established models = 0.0465351 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0465351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073207Jy sigma=0.000641 ! Fit after self-cal, rms=0.072369Jy sigma=0.000632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.18 mas, bmaj=15.57 mas, bpa=-12.16 degrees ! Estimated noise=829.444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00918563 Jy ! Component: 100 - total flux cleaned = 0.0148191 Jy ! Component: 150 - total flux cleaned = 0.0186124 Jy ! Component: 200 - total flux cleaned = 0.0212195 Jy ! Total flux subtracted in 200 components = 0.0212195 Jy ! Clean residual min=-0.004190 max=0.004746 Jy/beam ! Clean residual mean=0.000025 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.0677546 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 82 components and 0.0677546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071100Jy sigma=0.000619 ! Fit after self-cal, rms=0.070974Jy sigma=0.000618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.10 KP 0.98 ! LA 0.95 MK 0.98 NL 1.18 OV 1.25 ! PT 0.90 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.11 KP 1.00 ! LA 0.94 MK 1.02 NL 1.17 OV 1.23 ! PT 0.87 ! ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.21 KP 0.91 ! LA 0.94 MK 0.99 NL 1.22 OV 1.13 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.81 KP 1.00* ! LA 0.90 MK 0.80 NL 1.00* OV 0.80 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.070974Jy sigma=0.000618 ! Fit after self-cal, rms=0.070236Jy sigma=0.000613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.142 mas, bmaj=15.42 mas, bpa=-12.7 degrees ! Estimated noise=846.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952985 Jy ! Component: 100 - total flux cleaned = 0.000748861 Jy ! Component: 150 - total flux cleaned = 0.000518858 Jy ! Component: 200 - total flux cleaned = 0.000456869 Jy ! Total flux subtracted in 200 components = 0.000456869 Jy ! Clean residual min=-0.003287 max=0.004008 Jy/beam ! Clean residual mean=0.000009 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.0682115 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.0682115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070166Jy sigma=0.000612 ! Fit after self-cal, rms=0.070301Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070301Jy sigma=0.000611 ! Fit after self-cal, rms=0.070707Jy sigma=0.000610 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=15.33 mas, bpa=-12.82 degrees ! Estimated noise=840.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.15992e-05 Jy ! Component: 100 - total flux cleaned = -0.000270586 Jy ! Component: 150 - total flux cleaned = -0.000356278 Jy ! Component: 200 - total flux cleaned = -0.000356513 Jy ! Total flux subtracted in 200 components = -0.000356513 Jy ! Clean residual min=-0.003111 max=0.003368 Jy/beam ! Clean residual mean=0.000008 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.067855 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.067855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070670Jy sigma=0.000610 ! Fit after self-cal, rms=0.070735Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171755 Jy ! Component: 100 - total flux cleaned = -0.000174229 Jy ! Component: 150 - total flux cleaned = -0.000127488 Jy ! Component: 200 - total flux cleaned = -0.000128341 Jy ! Total flux subtracted in 200 components = -0.000128341 Jy ! Clean residual min=-0.003067 max=0.003259 Jy/beam ! Clean residual mean=0.000009 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0677266 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.0677266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070712Jy sigma=0.000610 ! Fit after self-cal, rms=0.070681Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070681Jy sigma=0.000610 ! Fit after self-cal, rms=0.070805Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=15.39 mas, bpa=-12.83 degrees ! Estimated noise=834.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061145 Jy ! Component: 100 - total flux cleaned = -0.000663839 Jy ! Component: 150 - total flux cleaned = -0.000709969 Jy ! Component: 200 - total flux cleaned = -0.000751228 Jy ! Total flux subtracted in 200 components = -0.000751228 Jy ! Clean residual min=-0.003018 max=0.003043 Jy/beam ! Clean residual mean=0.000007 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.0669754 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 0.0669754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070779Jy sigma=0.000609 ! Fit after self-cal, rms=0.070809Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117202 Jy ! Component: 100 - total flux cleaned = -0.000117555 Jy ! Component: 150 - total flux cleaned = -0.000117402 Jy ! Component: 200 - total flux cleaned = -0.000135552 Jy ! Total flux subtracted in 200 components = -0.000135552 Jy ! Clean residual min=-0.003017 max=0.002963 Jy/beam ! Clean residual mean=0.000008 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0668398 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.0668398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070792Jy sigma=0.000609 ! Fit after self-cal, rms=0.070765Jy sigma=0.000609 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070765Jy sigma=0.000609 ! Fit after self-cal, rms=0.070966Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.81 mas, bmaj=15.89 mas, bpa=-12.77 degrees ! Estimated noise=944.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186407 Jy ! Component: 100 - total flux cleaned = -0.000239356 Jy ! Component: 150 - total flux cleaned = -0.000261905 Jy ! Component: 200 - total flux cleaned = -0.000283688 Jy ! Total flux subtracted in 200 components = -0.000283688 Jy ! Clean residual min=-0.003689 max=0.004052 Jy/beam ! Clean residual mean=0.000011 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.0665561 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 0.0665561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070948Jy sigma=0.000609 ! Fit after self-cal, rms=0.070951Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010836 Jy ! Component: 100 - total flux cleaned = 6.62564e-05 Jy ! Component: 150 - total flux cleaned = 4.7128e-05 Jy ! Component: 200 - total flux cleaned = 2.89595e-05 Jy ! Total flux subtracted in 200 components = 2.89595e-05 Jy ! Clean residual min=-0.003633 max=0.004051 Jy/beam ! Clean residual mean=0.000011 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.0665851 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 117 components and 0.0665851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070941Jy sigma=0.000609 ! Fit after self-cal, rms=0.070914Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=15.54 mas, bpa=-12.8 degrees ! Estimated noise=830.666 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 15.54 at -12.8 degrees (North through East) ! Clean map min=-0.0038075 max=0.047296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=14.89 mas, bpa=-13.19 degrees ! Estimated noise=1376.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316649 Jy ! Component: 100 - total flux cleaned = 0.0419772 Jy ! Component: 150 - total flux cleaned = 0.0486052 Jy ! Component: 200 - total flux cleaned = 0.0515348 Jy ! Total flux subtracted in 200 components = 0.0515348 Jy ! Clean residual min=-0.004637 max=0.003884 Jy/beam ! Clean residual mean=0.000007 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.0515348 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0515348 Jy ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=15.54 mas, bpa=-12.8 degrees ! Estimated noise=830.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696712 Jy ! Component: 100 - total flux cleaned = 0.0110224 Jy ! Component: 150 - total flux cleaned = 0.0121484 Jy ! Component: 200 - total flux cleaned = 0.0128654 Jy ! Total flux subtracted in 200 components = 0.0128654 Jy ! Clean residual min=-0.004172 max=0.003131 Jy/beam ! Clean residual mean=0.000009 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.0644001 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 70 components and 0.0644001 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.81 mas, bmaj=15.89 mas, bpa=-12.77 degrees ! Estimated noise=944.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173788 Jy ! Component: 100 - total flux cleaned = 0.00201605 Jy ! Component: 150 - total flux cleaned = 0.00223502 Jy ! Component: 200 - total flux cleaned = 0.00227336 Jy ! Total flux subtracted in 200 components = 0.00227336 Jy ! Clean residual min=-0.004116 max=0.004096 Jy/beam ! Clean residual mean=0.000010 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.0666735 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.98746e-07 Jy ! Component: 100 - total flux cleaned = 3.25257e-05 Jy ! Component: 150 - total flux cleaned = 3.3087e-05 Jy ! Component: 200 - total flux cleaned = 3.26087e-05 Jy ! Total flux subtracted in 200 components = 3.26087e-05 Jy ! Clean residual min=-0.003919 max=0.004125 Jy/beam ! Clean residual mean=0.000010 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.0667061 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.0667061 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=15.54 mas, bpa=-12.8 degrees ! Estimated noise=830.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75286e-05 Jy ! Component: 100 - total flux cleaned = -7.71921e-05 Jy ! Component: 150 - total flux cleaned = -0.000200651 Jy ! Component: 200 - total flux cleaned = -0.000313222 Jy ! Total flux subtracted in 200 components = -0.000313222 Jy ! Clean residual min=-0.002974 max=0.002913 Jy/beam ! Clean residual mean=0.000007 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.0663929 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.0663929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070947Jy sigma=0.000609 ! Fit after self-cal, rms=0.070941Jy sigma=0.000609 wmodel J0642+1128_S_2017_09_26_pus_map.mod ! Writing 100 model components to file: J0642+1128_S_2017_09_26_pus_map.mod wobs J0642+1128_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0642+1128_S_2017_09_26_pus_uvs.fits wwins J0642+1128_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0642+1128_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198139 Jy ! Component: 100 - total flux cleaned = 0.000430532 Jy ! Component: 150 - total flux cleaned = 0.00067875 Jy ! Component: 200 - total flux cleaned = 0.000864121 Jy ! Component: 250 - total flux cleaned = 0.0011617 Jy ! Component: 300 - total flux cleaned = 0.00143504 Jy ! Component: 350 - total flux cleaned = 0.00171598 Jy ! Component: 400 - total flux cleaned = 0.00192554 Jy ! Component: 450 - total flux cleaned = 0.00212209 Jy ! Component: 500 - total flux cleaned = 0.00209888 Jy ! Component: 550 - total flux cleaned = 0.00203278 Jy ! Component: 600 - total flux cleaned = 0.00209579 Jy ! Component: 650 - total flux cleaned = 0.00219624 Jy ! Component: 700 - total flux cleaned = 0.00229289 Jy ! Component: 750 - total flux cleaned = 0.00234918 Jy ! Component: 800 - total flux cleaned = 0.00245816 Jy ! Component: 850 - total flux cleaned = 0.00259835 Jy ! Component: 900 - total flux cleaned = 0.0027339 Jy ! Component: 950 - total flux cleaned = 0.00283296 Jy ! Component: 1000 - total flux cleaned = 0.00292908 Jy ! Component: 1050 - total flux cleaned = 0.00294442 Jy ! Component: 1100 - total flux cleaned = 0.00302096 Jy ! Component: 1150 - total flux cleaned = 0.00311093 Jy ! Component: 1200 - total flux cleaned = 0.00319884 Jy ! Component: 1250 - total flux cleaned = 0.00329951 Jy ! Component: 1300 - total flux cleaned = 0.00334176 Jy ! Component: 1350 - total flux cleaned = 0.00338321 Jy ! Component: 1400 - total flux cleaned = 0.0033969 Jy ! Component: 1450 - total flux cleaned = 0.0034501 Jy ! Component: 1500 - total flux cleaned = 0.00346306 Jy ! Component: 1550 - total flux cleaned = 0.00346318 Jy ! Component: 1600 - total flux cleaned = 0.00346336 Jy ! Component: 1650 - total flux cleaned = 0.00345088 Jy ! Component: 1700 - total flux cleaned = 0.00347549 Jy ! Component: 1750 - total flux cleaned = 0.00345113 Jy ! Component: 1800 - total flux cleaned = 0.00340283 Jy ! Component: 1850 - total flux cleaned = 0.00340289 Jy ! Component: 1900 - total flux cleaned = 0.0033674 Jy ! Component: 1950 - total flux cleaned = 0.00334407 Jy ! Component: 2000 - total flux cleaned = 0.00333244 Jy ! Component: 2050 - total flux cleaned = 0.00330956 Jy ! Component: 2100 - total flux cleaned = 0.00328683 Jy ! Component: 2150 - total flux cleaned = 0.00325288 Jy ! Component: 2200 - total flux cleaned = 0.00321933 Jy ! Component: 2250 - total flux cleaned = 0.0032195 Jy ! Component: 2300 - total flux cleaned = 0.00321956 Jy ! Component: 2350 - total flux cleaned = 0.0032196 Jy ! Component: 2400 - total flux cleaned = 0.00324141 Jy ! Component: 2450 - total flux cleaned = 0.00325216 Jy ! Component: 2500 - total flux cleaned = 0.00324136 Jy ! Component: 2550 - total flux cleaned = 0.00325206 Jy ! Component: 2600 - total flux cleaned = 0.00325202 Jy ! Component: 2650 - total flux cleaned = 0.00326277 Jy ! Component: 2700 - total flux cleaned = 0.00326278 Jy ! Component: 2750 - total flux cleaned = 0.00326283 Jy ! Component: 2800 - total flux cleaned = 0.00327348 Jy ! Component: 2850 - total flux cleaned = 0.00328404 Jy ! Component: 2900 - total flux cleaned = 0.00327352 Jy ! Component: 2950 - total flux cleaned = 0.00324215 Jy ! Component: 3000 - total flux cleaned = 0.00324216 Jy ! Component: 3050 - total flux cleaned = 0.00325261 Jy ! Component: 3100 - total flux cleaned = 0.00324227 Jy ! Component: 3150 - total flux cleaned = 0.00320077 Jy ! Component: 3200 - total flux cleaned = 0.00319038 Jy ! Component: 3250 - total flux cleaned = 0.00316968 Jy ! Component: 3300 - total flux cleaned = 0.00314899 Jy ! Component: 3350 - total flux cleaned = 0.00311801 Jy ! Component: 3400 - total flux cleaned = 0.00308699 Jy ! Component: 3450 - total flux cleaned = 0.00306632 Jy ! Component: 3500 - total flux cleaned = 0.00304574 Jy ! Component: 3550 - total flux cleaned = 0.00303542 Jy ! Component: 3600 - total flux cleaned = 0.00301476 Jy ! Component: 3650 - total flux cleaned = 0.00298372 Jy ! Component: 3700 - total flux cleaned = 0.00296305 Jy ! Component: 3750 - total flux cleaned = 0.00293204 Jy ! Component: 3800 - total flux cleaned = 0.00294237 Jy ! Component: 3850 - total flux cleaned = 0.00292155 Jy ! Component: 3900 - total flux cleaned = 0.00292157 Jy ! Component: 3950 - total flux cleaned = 0.00290058 Jy ! Component: 4000 - total flux cleaned = 0.00291107 Jy ! Component: 4050 - total flux cleaned = 0.00293209 Jy ! Total flux subtracted in 4096 components = 0.00296375 Jy ! Clean residual min=-0.000697 max=0.000744 Jy/beam ! Clean residual mean=0.000002 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0693566 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 362 components and 0.0693567 Jy ![Exited script file: muppet] wmap "J0642+1128_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 15.54 at -12.8 degrees (North through East) ! Clean map min=-0.0027711 max=0.046878 Jy/beam ! Writing clean map to FITS file: J0642+1128_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0468782 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209772 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34245 1.34245 2.6849 5.36979 10.7396 21.4792 42.9584 85.9167 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.088 x 15.54 at -12.8 degrees (North through East) ! Clean map min=-0.0027711 max=0.046878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0642+1128_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:55:39 2019