! Started logfile: J0640-1253_S_2017_06_10_pus_uvs.log on Mon May 6 14:46:39 2019 obs J0640-1253_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0640-1253_S_2017_06_10_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906901 visibilities/baseline/integration-bin. ! Found source: J0640-1253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0640-1253_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 595 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974441Jy sigma=0.008001 ! Fit after self-cal, rms=0.946954Jy sigma=0.007801 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=7.123 mas, bpa=-4.543 degrees ! Estimated noise=1444.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04112 Jy ! Component: 100 - total flux cleaned = 0.0519316 Jy ! Total flux subtracted in 100 components = 0.0519316 Jy ! Clean residual min=-0.004284 max=0.004851 Jy/beam ! Clean residual mean=-0.000001 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.0519316 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0519316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087683Jy sigma=0.000679 ! Fit after self-cal, rms=0.087314Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.482 mas, bpa=-4.215 degrees ! Estimated noise=858.727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00816758 Jy ! Component: 100 - total flux cleaned = 0.0119597 Jy ! Component: 150 - total flux cleaned = 0.0139667 Jy ! Component: 200 - total flux cleaned = 0.0150885 Jy ! Total flux subtracted in 200 components = 0.0150885 Jy ! Clean residual min=-0.002755 max=0.003086 Jy/beam ! Clean residual mean=0.000004 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0670202 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 58 components and 0.0670202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086591Jy sigma=0.000671 ! Fit after self-cal, rms=0.086583Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.05 KP 0.99 ! LA 0.98 MK 1.10 NL 0.98 OV 1.02 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00 KP 0.97 ! LA 0.94 MK 0.94 NL 1.20 OV 1.08 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.99 KP 1.00 ! LA 0.98 MK 1.24 NL 1.31 OV 0.96 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.86 KP 1.00* ! LA 0.69 MK 0.80 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.086583Jy sigma=0.000670 ! Fit after self-cal, rms=0.088022Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.64 mas, bpa=-4.071 degrees ! Estimated noise=876.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538684 Jy ! Component: 100 - total flux cleaned = 0.000434902 Jy ! Component: 150 - total flux cleaned = 0.000411173 Jy ! Component: 200 - total flux cleaned = 0.000411081 Jy ! Total flux subtracted in 200 components = 0.000411081 Jy ! Clean residual min=-0.002550 max=0.002999 Jy/beam ! Clean residual mean=0.000004 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0674312 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.0674312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088006Jy sigma=0.000668 ! Fit after self-cal, rms=0.088066Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088066Jy sigma=0.000668 ! Fit after self-cal, rms=0.087598Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=8.566 mas, bpa=-3.788 degrees ! Estimated noise=874.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330656 Jy ! Component: 100 - total flux cleaned = 0.000304785 Jy ! Component: 150 - total flux cleaned = 0.000284614 Jy ! Component: 200 - total flux cleaned = 0.000283879 Jy ! Total flux subtracted in 200 components = 0.000283879 Jy ! Clean residual min=-0.002421 max=0.002829 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0677151 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.0677151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087588Jy sigma=0.000667 ! Fit after self-cal, rms=0.087635Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279241 Jy ! Component: 100 - total flux cleaned = 0.00383179 Jy ! Component: 150 - total flux cleaned = 0.00417676 Jy ! Component: 200 - total flux cleaned = 0.0043156 Jy ! Total flux subtracted in 200 components = 0.0043156 Jy ! Clean residual min=-0.002120 max=0.002152 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0720307 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.0720307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087545Jy sigma=0.000665 ! Fit after self-cal, rms=0.087517Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087517Jy sigma=0.000665 ! Fit after self-cal, rms=0.086956Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=8.497 mas, bpa=-3.534 degrees ! Estimated noise=866.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156478 Jy ! Component: 100 - total flux cleaned = 0.00184752 Jy ! Component: 150 - total flux cleaned = 0.00204115 Jy ! Component: 200 - total flux cleaned = 0.00224047 Jy ! Total flux subtracted in 200 components = 0.00224047 Jy ! Clean residual min=-0.002015 max=0.002093 Jy/beam ! Clean residual mean=0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0742712 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.0742712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086919Jy sigma=0.000665 ! Fit after self-cal, rms=0.086924Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607469 Jy ! Component: 100 - total flux cleaned = 0.000697307 Jy ! Component: 150 - total flux cleaned = 0.00085179 Jy ! Component: 200 - total flux cleaned = 0.000966967 Jy ! Total flux subtracted in 200 components = 0.000966967 Jy ! Clean residual min=-0.002018 max=0.002060 Jy/beam ! Clean residual mean=0.000004 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0752382 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.0752382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086906Jy sigma=0.000664 ! Fit after self-cal, rms=0.086896Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086896Jy sigma=0.000664 ! Fit after self-cal, rms=0.086747Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.701 mas, bmaj=16.19 mas, bpa=-1.669 degrees ! Estimated noise=1076.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854328 Jy ! Component: 100 - total flux cleaned = 0.00127255 Jy ! Component: 150 - total flux cleaned = 0.00135432 Jy ! Component: 200 - total flux cleaned = 0.00140213 Jy ! Total flux subtracted in 200 components = 0.00140213 Jy ! Clean residual min=-0.002340 max=0.001969 Jy/beam ! Clean residual mean=0.000006 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0766403 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 104 components and 0.0766403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086741Jy sigma=0.000664 ! Fit after self-cal, rms=0.086742Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238664 Jy ! Component: 100 - total flux cleaned = 0.000291821 Jy ! Component: 150 - total flux cleaned = 0.000328055 Jy ! Component: 200 - total flux cleaned = 0.000350811 Jy ! Total flux subtracted in 200 components = 0.000350811 Jy ! Clean residual min=-0.002323 max=0.001995 Jy/beam ! Clean residual mean=0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0769911 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 0.0769911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086738Jy sigma=0.000664 ! Fit after self-cal, rms=0.086735Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=8.44 mas, bpa=-3.4 degrees ! Estimated noise=864.587 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 8.44 at -3.4 degrees (North through East) ! Clean map min=-0.0020734 max=0.054605 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.093 mas, bpa=-4.118 degrees ! Estimated noise=1455.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411826 Jy ! Component: 100 - total flux cleaned = 0.0531885 Jy ! Component: 150 - total flux cleaned = 0.0593443 Jy ! Component: 200 - total flux cleaned = 0.0635854 Jy ! Total flux subtracted in 200 components = 0.0635854 Jy ! Clean residual min=-0.004044 max=0.004069 Jy/beam ! Clean residual mean=-0.000001 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.0635853 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0635853 Jy ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=8.44 mas, bpa=-3.4 degrees ! Estimated noise=864.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473645 Jy ! Component: 100 - total flux cleaned = 0.00768586 Jy ! Component: 150 - total flux cleaned = 0.00900309 Jy ! Component: 200 - total flux cleaned = 0.00989995 Jy ! Total flux subtracted in 200 components = 0.00989995 Jy ! Clean residual min=-0.002292 max=0.001998 Jy/beam ! Clean residual mean=0.000003 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0734853 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0734853 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.701 mas, bmaj=16.19 mas, bpa=-1.669 degrees ! Estimated noise=1076.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183808 Jy ! Component: 100 - total flux cleaned = 0.00267673 Jy ! Component: 150 - total flux cleaned = 0.00285713 Jy ! Component: 200 - total flux cleaned = 0.00289917 Jy ! Total flux subtracted in 200 components = 0.00289917 Jy ! Clean residual min=-0.002358 max=0.002004 Jy/beam ! Clean residual mean=0.000007 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0763845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.04322e-07 Jy ! Component: 100 - total flux cleaned = 1.87765e-06 Jy ! Component: 150 - total flux cleaned = 2.84981e-06 Jy ! Component: 200 - total flux cleaned = 3.11895e-06 Jy ! Total flux subtracted in 200 components = 3.11895e-06 Jy ! Clean residual min=-0.002346 max=0.002000 Jy/beam ! Clean residual mean=0.000007 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0763876 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 68 components and 0.0763876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=8.44 mas, bpa=-3.4 degrees ! Estimated noise=864.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.69305e-05 Jy ! Component: 100 - total flux cleaned = -0.000225039 Jy ! Component: 150 - total flux cleaned = -0.000305305 Jy ! Component: 200 - total flux cleaned = -0.000305036 Jy ! Total flux subtracted in 200 components = -0.000305036 Jy ! Clean residual min=-0.001912 max=0.002039 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0760825 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.0760825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086726Jy sigma=0.000664 ! Fit after self-cal, rms=0.086706Jy sigma=0.000664 wmodel J0640-1253_S_2017_06_10_pus_map.mod ! Writing 79 model components to file: J0640-1253_S_2017_06_10_pus_map.mod wobs J0640-1253_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0640-1253_S_2017_06_10_pus_uvs.fits wwins J0640-1253_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J0640-1253_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152497 Jy ! Component: 100 - total flux cleaned = 0.0001174 Jy ! Component: 150 - total flux cleaned = 0.00018336 Jy ! Component: 200 - total flux cleaned = 0.000277494 Jy ! Component: 250 - total flux cleaned = 0.000458704 Jy ! Component: 300 - total flux cleaned = 0.000575883 Jy ! Component: 350 - total flux cleaned = 0.000774323 Jy ! Component: 400 - total flux cleaned = 0.000912189 Jy ! Component: 450 - total flux cleaned = 0.00112675 Jy ! Component: 500 - total flux cleaned = 0.00125712 Jy ! Component: 550 - total flux cleaned = 0.00135995 Jy ! Component: 600 - total flux cleaned = 0.00145999 Jy ! Component: 650 - total flux cleaned = 0.00158239 Jy ! Component: 700 - total flux cleaned = 0.00170154 Jy ! Component: 750 - total flux cleaned = 0.00174765 Jy ! Component: 800 - total flux cleaned = 0.00181612 Jy ! Component: 850 - total flux cleaned = 0.00177152 Jy ! Component: 900 - total flux cleaned = 0.00179439 Jy ! Component: 950 - total flux cleaned = 0.00192495 Jy ! Component: 1000 - total flux cleaned = 0.00188149 Jy ! Component: 1050 - total flux cleaned = 0.00190261 Jy ! Component: 1100 - total flux cleaned = 0.00188158 Jy ! Component: 1150 - total flux cleaned = 0.00194238 Jy ! Component: 1200 - total flux cleaned = 0.00196256 Jy ! Component: 1250 - total flux cleaned = 0.00196209 Jy ! Component: 1300 - total flux cleaned = 0.00192278 Jy ! Component: 1350 - total flux cleaned = 0.00194229 Jy ! Component: 1400 - total flux cleaned = 0.00192294 Jy ! Component: 1450 - total flux cleaned = 0.00192298 Jy ! Component: 1500 - total flux cleaned = 0.00194186 Jy ! Component: 1550 - total flux cleaned = 0.0019605 Jy ! Component: 1600 - total flux cleaned = 0.00196061 Jy ! Component: 1650 - total flux cleaned = 0.00201432 Jy ! Component: 1700 - total flux cleaned = 0.00208508 Jy ! Component: 1750 - total flux cleaned = 0.00213726 Jy ! Component: 1800 - total flux cleaned = 0.00211998 Jy ! Component: 1850 - total flux cleaned = 0.00215433 Jy ! Component: 1900 - total flux cleaned = 0.00223843 Jy ! Component: 1950 - total flux cleaned = 0.00222197 Jy ! Component: 2000 - total flux cleaned = 0.00227144 Jy ! Component: 2050 - total flux cleaned = 0.00228765 Jy ! Component: 2100 - total flux cleaned = 0.00235219 Jy ! Component: 2150 - total flux cleaned = 0.00235216 Jy ! Component: 2200 - total flux cleaned = 0.00230481 Jy ! Component: 2250 - total flux cleaned = 0.0022427 Jy ! Component: 2300 - total flux cleaned = 0.00230445 Jy ! Component: 2350 - total flux cleaned = 0.00238083 Jy ! Component: 2400 - total flux cleaned = 0.00238087 Jy ! Component: 2450 - total flux cleaned = 0.00235088 Jy ! Component: 2500 - total flux cleaned = 0.00236583 Jy ! Component: 2550 - total flux cleaned = 0.00243904 Jy ! Component: 2600 - total flux cleaned = 0.00246785 Jy ! Component: 2650 - total flux cleaned = 0.00249675 Jy ! Component: 2700 - total flux cleaned = 0.00252514 Jy ! Component: 2750 - total flux cleaned = 0.00261 Jy ! Component: 2800 - total flux cleaned = 0.00265199 Jy ! Component: 2850 - total flux cleaned = 0.00263809 Jy ! Component: 2900 - total flux cleaned = 0.00273416 Jy ! Component: 2950 - total flux cleaned = 0.00277478 Jy ! Component: 3000 - total flux cleaned = 0.0027614 Jy ! Component: 3050 - total flux cleaned = 0.00284164 Jy ! Component: 3100 - total flux cleaned = 0.00284147 Jy ! Component: 3150 - total flux cleaned = 0.00284165 Jy ! Component: 3200 - total flux cleaned = 0.00290682 Jy ! Component: 3250 - total flux cleaned = 0.00290666 Jy ! Component: 3300 - total flux cleaned = 0.00298345 Jy ! Component: 3350 - total flux cleaned = 0.00292001 Jy ! Component: 3400 - total flux cleaned = 0.00298317 Jy ! Component: 3450 - total flux cleaned = 0.00307085 Jy ! Component: 3500 - total flux cleaned = 0.0030582 Jy ! Component: 3550 - total flux cleaned = 0.00308291 Jy ! Component: 3600 - total flux cleaned = 0.00311964 Jy ! Component: 3650 - total flux cleaned = 0.00318016 Jy ! Component: 3700 - total flux cleaned = 0.0032043 Jy ! Component: 3750 - total flux cleaned = 0.00325207 Jy ! Component: 3800 - total flux cleaned = 0.00324026 Jy ! Component: 3850 - total flux cleaned = 0.00333432 Jy ! Component: 3900 - total flux cleaned = 0.00335758 Jy ! Component: 3950 - total flux cleaned = 0.00341543 Jy ! Component: 4000 - total flux cleaned = 0.003427 Jy ! Component: 4050 - total flux cleaned = 0.00349562 Jy ! Total flux subtracted in 4096 components = 0.00352962 Jy ! Clean residual min=-0.000678 max=0.000583 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0796122 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 353 components and 0.0796122 Jy ![Exited script file: muppet] wmap "J0640-1253_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 8.44 at -3.4 degrees (North through East) ! Clean map min=-0.0020307 max=0.055351 Jy/beam ! Writing clean map to FITS file: J0640-1253_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0553508 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002056 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11435 1.11435 2.22869 4.45739 8.91477 17.8295 35.6591 71.3182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.289 x 8.44 at -3.4 degrees (North through East) ! Clean map min=-0.0020307 max=0.055351 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0640-1253_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:46:44 2019