! Started logfile: J0638+2458_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:55 2019 obs J0638+2458_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0638+2458_S_2017_05_27_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975447 visibilities/baseline/integration-bin. ! Found source: J0638+2458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 25108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0638+2458_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 784 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961593Jy sigma=0.021988 ! Fit after self-cal, rms=0.943494Jy sigma=0.021929 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=6.052 mas, bpa=2.161 degrees ! Estimated noise=811.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397842 Jy ! Component: 100 - total flux cleaned = 0.0487144 Jy ! Total flux subtracted in 100 components = 0.0487144 Jy ! Clean residual min=-0.004998 max=0.005957 Jy/beam ! Clean residual mean=-0.000004 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.0487144 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0487144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098631Jy sigma=0.001159 ! Fit after self-cal, rms=0.098573Jy sigma=0.001158 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=6.821 mas, bpa=1.458 degrees ! Estimated noise=523.112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521037 Jy ! Component: 100 - total flux cleaned = 0.00847063 Jy ! Component: 150 - total flux cleaned = 0.0106328 Jy ! Component: 200 - total flux cleaned = 0.0120868 Jy ! Total flux subtracted in 200 components = 0.0120868 Jy ! Clean residual min=-0.004897 max=0.006430 Jy/beam ! Clean residual mean=-0.000002 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.0608012 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 26 components and 0.0608012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098104Jy sigma=0.001171 ! Fit after self-cal, rms=0.098112Jy sigma=0.001171 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.85 HN 1.15 KP 0.94 ! LA 0.99 MK 1.03 NL 0.89 OV 0.97 ! PT 1.02 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 1.06 KP 0.91 ! LA 0.87 MK 0.95 NL 0.93 OV 1.03 ! PT 1.01 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 22.10 FD 0.94 HN 1.06 KP 1.13 ! LA 1.03 MK 0.95 NL 1.00 OV 0.93 ! PT 0.99 SC 0.91 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.92 KP 1.00* ! LA 1.03 MK 0.76 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.098112Jy sigma=0.001171 ! Fit after self-cal, rms=0.823767Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.112 mas, bpa=0.01924 degrees ! Estimated noise=563.384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275873 Jy ! Component: 100 - total flux cleaned = 0.00265532 Jy ! Component: 150 - total flux cleaned = 0.00238201 Jy ! Component: 200 - total flux cleaned = 0.00222168 Jy ! Total flux subtracted in 200 components = 0.00222168 Jy ! Clean residual min=-0.003213 max=0.002225 Jy/beam ! Clean residual mean=-0.000001 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0630229 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0630229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.823145Jy sigma=0.000683 ! Fit after self-cal, rms=0.823904Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.823904Jy sigma=0.000679 ! Fit after self-cal, rms=0.855750Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.099 mas, bpa=-0.2998 degrees ! Estimated noise=577.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182938 Jy ! Component: 100 - total flux cleaned = 0.00176562 Jy ! Component: 150 - total flux cleaned = 0.00153094 Jy ! Component: 200 - total flux cleaned = 0.00142708 Jy ! Total flux subtracted in 200 components = 0.00142708 Jy ! Clean residual min=-0.002071 max=0.002048 Jy/beam ! Clean residual mean=0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0644499 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0644499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.855389Jy sigma=0.000674 ! Fit after self-cal, rms=0.855383Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205034 Jy ! Component: 100 - total flux cleaned = -0.000817918 Jy ! Component: 150 - total flux cleaned = -0.00110285 Jy ! Component: 200 - total flux cleaned = -0.00130216 Jy ! Total flux subtracted in 200 components = -0.00130216 Jy ! Clean residual min=-0.001865 max=0.001774 Jy/beam ! Clean residual mean=0.000000 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0631478 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.0631478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.855073Jy sigma=0.000674 ! Fit after self-cal, rms=0.855086Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.855086Jy sigma=0.000673 ! Fit after self-cal, rms=0.706093Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.059 mas, bpa=-0.4147 degrees ! Estimated noise=586.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149466 Jy ! Component: 100 - total flux cleaned = 0.00145206 Jy ! Component: 150 - total flux cleaned = 0.00141169 Jy ! Component: 200 - total flux cleaned = 0.00133745 Jy ! Total flux subtracted in 200 components = 0.00133745 Jy ! Clean residual min=-0.001582 max=0.001636 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0644853 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.0644852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705929Jy sigma=0.000670 ! Fit after self-cal, rms=0.705918Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07872e-06 Jy ! Component: 100 - total flux cleaned = -0.000102936 Jy ! Component: 150 - total flux cleaned = -0.000166789 Jy ! Component: 200 - total flux cleaned = -0.000227254 Jy ! Total flux subtracted in 200 components = -0.000227254 Jy ! Clean residual min=-0.001637 max=0.001559 Jy/beam ! Clean residual mean=0.000000 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.064258 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.064258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705826Jy sigma=0.000670 ! Fit after self-cal, rms=0.705826Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705826Jy sigma=0.000670 ! Fit after self-cal, rms=0.759549Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.378 mas, bmaj=10.77 mas, bpa=-4.224 degrees ! Estimated noise=738.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971884 Jy ! Component: 100 - total flux cleaned = 0.000800952 Jy ! Component: 150 - total flux cleaned = 0.000619818 Jy ! Component: 200 - total flux cleaned = 0.000496355 Jy ! Total flux subtracted in 200 components = 0.000496355 Jy ! Clean residual min=-0.001758 max=0.001816 Jy/beam ! Clean residual mean=0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0647544 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.0647544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.759383Jy sigma=0.000670 ! Fit after self-cal, rms=0.759382Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225222 Jy ! Component: 100 - total flux cleaned = -0.000334549 Jy ! Component: 150 - total flux cleaned = -0.000431272 Jy ! Component: 200 - total flux cleaned = -0.000476067 Jy ! Total flux subtracted in 200 components = -0.000476067 Jy ! Clean residual min=-0.001812 max=0.001875 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0642783 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.0642783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.759307Jy sigma=0.000670 ! Fit after self-cal, rms=0.759305Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=7.059 mas, bpa=-0.5355 degrees ! Estimated noise=599.676 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 7.059 at -0.5355 degrees (North through East) ! Clean map min=-0.0025593 max=0.060992 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=6.189 mas, bpa=-0.5887 degrees ! Estimated noise=919.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452851 Jy ! Component: 100 - total flux cleaned = 0.0570697 Jy ! Component: 150 - total flux cleaned = 0.0632613 Jy ! Component: 200 - total flux cleaned = 0.0644608 Jy ! Total flux subtracted in 200 components = 0.0644608 Jy ! Clean residual min=-0.002619 max=0.002715 Jy/beam ! Clean residual mean=-0.000000 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0644608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0644608 Jy ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=7.059 mas, bpa=-0.5355 degrees ! Estimated noise=599.676 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961402 Jy ! Component: 100 - total flux cleaned = 0.000877276 Jy ! Component: 150 - total flux cleaned = 0.000591894 Jy ! Component: 200 - total flux cleaned = 0.000410674 Jy ! Total flux subtracted in 200 components = 0.000410674 Jy ! Clean residual min=-0.001678 max=0.001779 Jy/beam ! Clean residual mean=0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0648715 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.0648715 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.378 mas, bmaj=10.77 mas, bpa=-4.224 degrees ! Estimated noise=738.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158974 Jy ! Component: 100 - total flux cleaned = -0.000347095 Jy ! Component: 150 - total flux cleaned = -0.000552736 Jy ! Component: 200 - total flux cleaned = -0.000697911 Jy ! Total flux subtracted in 200 components = -0.000697911 Jy ! Clean residual min=-0.001750 max=0.001896 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0641736 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81241e-07 Jy ! Component: 100 - total flux cleaned = -3.11155e-05 Jy ! Component: 150 - total flux cleaned = -3.04716e-05 Jy ! Component: 200 - total flux cleaned = -5.91283e-05 Jy ! Total flux subtracted in 200 components = -5.91283e-05 Jy ! Clean residual min=-0.001766 max=0.001887 Jy/beam ! Clean residual mean=0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0641144 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 69 components and 0.0641144 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=7.059 mas, bpa=-0.5355 degrees ! Estimated noise=599.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98188e-05 Jy ! Component: 100 - total flux cleaned = 3.04791e-05 Jy ! Component: 150 - total flux cleaned = 9.41082e-05 Jy ! Component: 200 - total flux cleaned = 0.000153068 Jy ! Total flux subtracted in 200 components = 0.000153068 Jy ! Clean residual min=-0.001787 max=0.001791 Jy/beam ! Clean residual mean=0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0642675 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.0642675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.759274Jy sigma=0.000670 ! Fit after self-cal, rms=0.759277Jy sigma=0.000670 wmodel J0638+2458_S_2017_05_27_pus_map.mod ! Writing 80 model components to file: J0638+2458_S_2017_05_27_pus_map.mod wobs J0638+2458_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0638+2458_S_2017_05_27_pus_uvs.fits wwins J0638+2458_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0638+2458_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125604 Jy ! Component: 100 - total flux cleaned = 0.0002682 Jy ! Component: 150 - total flux cleaned = 0.000406112 Jy ! Component: 200 - total flux cleaned = 0.000565751 Jy ! Component: 250 - total flux cleaned = 0.000643316 Jy ! Component: 300 - total flux cleaned = 0.000794238 Jy ! Component: 350 - total flux cleaned = 0.000793861 Jy ! Component: 400 - total flux cleaned = 0.000914776 Jy ! Component: 450 - total flux cleaned = 0.0008905 Jy ! Component: 500 - total flux cleaned = 0.000890627 Jy ! Component: 550 - total flux cleaned = 0.000844291 Jy ! Component: 600 - total flux cleaned = 0.000890069 Jy ! Component: 650 - total flux cleaned = 0.000821993 Jy ! Component: 700 - total flux cleaned = 0.000799683 Jy ! Component: 750 - total flux cleaned = 0.000799442 Jy ! Component: 800 - total flux cleaned = 0.000755871 Jy ! Component: 850 - total flux cleaned = 0.000734475 Jy ! Component: 900 - total flux cleaned = 0.000819791 Jy ! Component: 950 - total flux cleaned = 0.000840845 Jy ! Component: 1000 - total flux cleaned = 0.00086187 Jy ! Component: 1050 - total flux cleaned = 0.000861486 Jy ! Component: 1100 - total flux cleaned = 0.000902968 Jy ! Component: 1150 - total flux cleaned = 0.00094354 Jy ! Component: 1200 - total flux cleaned = 0.00100433 Jy ! Component: 1250 - total flux cleaned = 0.00114496 Jy ! Component: 1300 - total flux cleaned = 0.00112457 Jy ! Component: 1350 - total flux cleaned = 0.00112474 Jy ! Component: 1400 - total flux cleaned = 0.00122288 Jy ! Component: 1450 - total flux cleaned = 0.00120345 Jy ! Component: 1500 - total flux cleaned = 0.00126175 Jy ! Component: 1550 - total flux cleaned = 0.0013192 Jy ! Component: 1600 - total flux cleaned = 0.00135705 Jy ! Component: 1650 - total flux cleaned = 0.00141363 Jy ! Component: 1700 - total flux cleaned = 0.00145119 Jy ! Component: 1750 - total flux cleaned = 0.00143242 Jy ! Component: 1800 - total flux cleaned = 0.00146943 Jy ! Component: 1850 - total flux cleaned = 0.001506 Jy ! Component: 1900 - total flux cleaned = 0.00154221 Jy ! Component: 1950 - total flux cleaned = 0.0014698 Jy ! Component: 2000 - total flux cleaned = 0.0014338 Jy ! Component: 2050 - total flux cleaned = 0.00148759 Jy ! Component: 2100 - total flux cleaned = 0.00145199 Jy ! Component: 2150 - total flux cleaned = 0.00139903 Jy ! Component: 2200 - total flux cleaned = 0.00139897 Jy ! Component: 2250 - total flux cleaned = 0.00138153 Jy ! Component: 2300 - total flux cleaned = 0.00129488 Jy ! Component: 2350 - total flux cleaned = 0.00131231 Jy ! Component: 2400 - total flux cleaned = 0.00129529 Jy ! Component: 2450 - total flux cleaned = 0.00129536 Jy ! Component: 2500 - total flux cleaned = 0.00121072 Jy ! Component: 2550 - total flux cleaned = 0.001194 Jy ! Component: 2600 - total flux cleaned = 0.0011772 Jy ! Component: 2650 - total flux cleaned = 0.00121042 Jy ! Component: 2700 - total flux cleaned = 0.00117731 Jy ! Component: 2750 - total flux cleaned = 0.00114431 Jy ! Component: 2800 - total flux cleaned = 0.00111156 Jy ! Component: 2850 - total flux cleaned = 0.00111161 Jy ! Component: 2900 - total flux cleaned = 0.00107923 Jy ! Component: 2950 - total flux cleaned = 0.00104716 Jy ! Component: 3000 - total flux cleaned = 0.000999193 Jy ! Component: 3050 - total flux cleaned = 0.00104696 Jy ! Component: 3100 - total flux cleaned = 0.00101526 Jy ! Component: 3150 - total flux cleaned = 0.000999366 Jy ! Component: 3200 - total flux cleaned = 0.000983576 Jy ! Component: 3250 - total flux cleaned = 0.000952392 Jy ! Component: 3300 - total flux cleaned = 0.000921251 Jy ! Component: 3350 - total flux cleaned = 0.000874856 Jy ! Component: 3400 - total flux cleaned = 0.000798006 Jy ! Component: 3450 - total flux cleaned = 0.000813309 Jy ! Component: 3500 - total flux cleaned = 0.000767584 Jy ! Component: 3550 - total flux cleaned = 0.000737239 Jy ! Component: 3600 - total flux cleaned = 0.00070705 Jy ! Component: 3650 - total flux cleaned = 0.000662031 Jy ! Component: 3700 - total flux cleaned = 0.000617228 Jy ! Component: 3750 - total flux cleaned = 0.000602363 Jy ! Component: 3800 - total flux cleaned = 0.00058753 Jy ! Component: 3850 - total flux cleaned = 0.000572814 Jy ! Component: 3900 - total flux cleaned = 0.00049933 Jy ! Component: 3950 - total flux cleaned = 0.00051402 Jy ! Component: 4000 - total flux cleaned = 0.00048486 Jy ! Component: 4050 - total flux cleaned = 0.00049926 Jy ! Total flux subtracted in 4096 components = 0.000470253 Jy ! Clean residual min=-0.000790 max=0.001160 Jy/beam ! Clean residual mean=-0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0647378 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 384 components and 0.0647377 Jy ![Exited script file: muppet] wmap "J0638+2458_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 7.059 at -0.5355 degrees (North through East) ! Clean map min=-0.0027817 max=0.061174 Jy/beam ! Writing clean map to FITS file: J0638+2458_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0611742 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271875 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33328 1.33328 2.66657 5.33313 10.6663 21.3325 42.6651 85.3301 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 7.059 at -0.5355 degrees (North through East) ! Clean map min=-0.0027817 max=0.061174 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0638+2458_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:59:01 2019