! Started logfile: J0637-3536_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:23 2019 obs J0637-3536_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0637-3536_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.344256 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0637-3536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 14624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0637-3536_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1043 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1334 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2262 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937160Jy sigma=0.005950 ! Fit after self-cal, rms=0.897298Jy sigma=0.005742 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=29.69 mas, bpa=-15.8 degrees ! Estimated noise=2755.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770729 Jy ! Component: 100 - total flux cleaned = 0.0994251 Jy ! Total flux subtracted in 100 components = 0.0994251 Jy ! Clean residual min=-0.009047 max=0.011405 Jy/beam ! Clean residual mean=-0.000114 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 0.0994251 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0994251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105586Jy sigma=0.000628 ! Fit after self-cal, rms=0.105428Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=29.16 mas, bpa=-15.11 degrees ! Estimated noise=1179.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169214 Jy ! Component: 100 - total flux cleaned = 0.0257264 Jy ! Component: 150 - total flux cleaned = 0.0307374 Jy ! Component: 200 - total flux cleaned = 0.0338668 Jy ! Total flux subtracted in 200 components = 0.0338668 Jy ! Clean residual min=-0.003511 max=0.004021 Jy/beam ! Clean residual mean=-0.000127 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.133292 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 97 components and 0.133292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102622Jy sigma=0.000611 ! Fit after self-cal, rms=0.102508Jy sigma=0.000610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 318 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 1.08 ! LA 1.01 MK 1.10 NL 1.00* OV 1.00 ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.91 KP 1.02 ! LA 0.95 MK 1.03 NL 1.00* OV 1.06 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.96 MK 1.05 NL 1.00* OV 0.97 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 393 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.102508Jy sigma=0.000610 ! Fit after self-cal, rms=0.101660Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=28.62 mas, bpa=-15.02 degrees ! Estimated noise=1213.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153457 Jy ! Component: 100 - total flux cleaned = 0.00179936 Jy ! Component: 150 - total flux cleaned = 0.00197767 Jy ! Component: 200 - total flux cleaned = 0.00210757 Jy ! Total flux subtracted in 200 components = 0.00210757 Jy ! Clean residual min=-0.003425 max=0.003031 Jy/beam ! Clean residual mean=-0.000065 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.135399 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.135399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101608Jy sigma=0.000617 ! Fit after self-cal, rms=0.101648Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101648Jy sigma=0.000617 ! Fit after self-cal, rms=0.101715Jy sigma=0.000617 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=28.56 mas, bpa=-15.05 degrees ! Estimated noise=1214.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137565 Jy ! Component: 100 - total flux cleaned = 0.00168804 Jy ! Component: 150 - total flux cleaned = 0.00182088 Jy ! Component: 200 - total flux cleaned = 0.00197236 Jy ! Total flux subtracted in 200 components = 0.00197236 Jy ! Clean residual min=-0.002814 max=0.003014 Jy/beam ! Clean residual mean=-0.000048 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.137372 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.137372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101682Jy sigma=0.000617 ! Fit after self-cal, rms=0.101733Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104752 Jy ! Component: 100 - total flux cleaned = 0.000198648 Jy ! Component: 150 - total flux cleaned = 0.000256219 Jy ! Component: 200 - total flux cleaned = 0.000363611 Jy ! Total flux subtracted in 200 components = 0.000363611 Jy ! Clean residual min=-0.002806 max=0.002912 Jy/beam ! Clean residual mean=-0.000048 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.137735 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 150 components and 0.137735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101713Jy sigma=0.000616 ! Fit after self-cal, rms=0.101716Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101716Jy sigma=0.000616 ! Fit after self-cal, rms=0.101889Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=28.52 mas, bpa=-15.07 degrees ! Estimated noise=1216.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106533 Jy ! Component: 100 - total flux cleaned = 0.00130527 Jy ! Component: 150 - total flux cleaned = 0.00140907 Jy ! Component: 200 - total flux cleaned = 0.00148202 Jy ! Total flux subtracted in 200 components = 0.00148202 Jy ! Clean residual min=-0.002725 max=0.002777 Jy/beam ! Clean residual mean=-0.000048 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.139217 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 166 components and 0.139217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101869Jy sigma=0.000616 ! Fit after self-cal, rms=0.101874Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.30123e-05 Jy ! Component: 100 - total flux cleaned = 8.78464e-05 Jy ! Component: 150 - total flux cleaned = 0.000159252 Jy ! Component: 200 - total flux cleaned = 0.000249258 Jy ! Total flux subtracted in 200 components = 0.000249258 Jy ! Clean residual min=-0.002704 max=0.002747 Jy/beam ! Clean residual mean=-0.000047 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.139467 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 170 components and 0.139467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101858Jy sigma=0.000616 ! Fit after self-cal, rms=0.101857Jy sigma=0.000616 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101857Jy sigma=0.000616 ! Fit after self-cal, rms=0.101853Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.65 mas, bmaj=31.12 mas, bpa=-4.889 degrees ! Estimated noise=1437.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947161 Jy ! Component: 100 - total flux cleaned = 0.00101374 Jy ! Component: 150 - total flux cleaned = 0.00105036 Jy ! Component: 200 - total flux cleaned = 0.00108362 Jy ! Total flux subtracted in 200 components = 0.00108362 Jy ! Clean residual min=-0.002323 max=0.003217 Jy/beam ! Clean residual mean=-0.000071 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.14055 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 191 components and 0.14055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101843Jy sigma=0.000616 ! Fit after self-cal, rms=0.101842Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234693 Jy ! Component: 100 - total flux cleaned = 0.000235992 Jy ! Component: 150 - total flux cleaned = 0.000184894 Jy ! Component: 200 - total flux cleaned = 0.000169543 Jy ! Total flux subtracted in 200 components = 0.000169543 Jy ! Clean residual min=-0.002291 max=0.003189 Jy/beam ! Clean residual mean=-0.000070 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.14072 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 211 components and 0.14072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101836Jy sigma=0.000616 ! Fit after self-cal, rms=0.101836Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=28.52 mas, bpa=-15.09 degrees ! Estimated noise=1216.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 28.52 at -15.09 degrees (North through East) ! Clean map min=-0.0024677 max=0.10308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=29.05 mas, bpa=-15.85 degrees ! Estimated noise=2003.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0751624 Jy ! Component: 100 - total flux cleaned = 0.100128 Jy ! Component: 150 - total flux cleaned = 0.113536 Jy ! Component: 200 - total flux cleaned = 0.122138 Jy ! Total flux subtracted in 200 components = 0.122138 Jy ! Clean residual min=-0.005614 max=0.005620 Jy/beam ! Clean residual mean=-0.000066 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.122138 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.122138 Jy ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=28.52 mas, bpa=-15.09 degrees ! Estimated noise=1216.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748346 Jy ! Component: 100 - total flux cleaned = 0.0117078 Jy ! Component: 150 - total flux cleaned = 0.0145012 Jy ! Component: 200 - total flux cleaned = 0.0164045 Jy ! Total flux subtracted in 200 components = 0.0164045 Jy ! Clean residual min=-0.003062 max=0.003220 Jy/beam ! Clean residual mean=-0.000063 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.138543 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 73 components and 0.138543 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.65 mas, bmaj=31.12 mas, bpa=-4.889 degrees ! Estimated noise=1437.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143146 Jy ! Component: 100 - total flux cleaned = 0.00190745 Jy ! Component: 150 - total flux cleaned = 0.00202543 Jy ! Component: 200 - total flux cleaned = 0.00204685 Jy ! Total flux subtracted in 200 components = 0.00204685 Jy ! Clean residual min=-0.002451 max=0.003755 Jy/beam ! Clean residual mean=-0.000073 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.14059 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18947e-07 Jy ! Component: 100 - total flux cleaned = -5.44223e-07 Jy ! Component: 150 - total flux cleaned = -8.01942e-07 Jy ! Component: 200 - total flux cleaned = -9.50121e-07 Jy ! Total flux subtracted in 200 components = -9.50121e-07 Jy ! Clean residual min=-0.002411 max=0.003628 Jy/beam ! Clean residual mean=-0.000072 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.140589 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 99 components and 0.140589 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=28.52 mas, bpa=-15.09 degrees ! Estimated noise=1216.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258443 Jy ! Component: 100 - total flux cleaned = 0.000258443 Jy ! Component: 150 - total flux cleaned = 0.000226998 Jy ! Component: 200 - total flux cleaned = 0.000225766 Jy ! Total flux subtracted in 200 components = 0.000225766 Jy ! Clean residual min=-0.002750 max=0.002885 Jy/beam ! Clean residual mean=-0.000046 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.140814 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.140814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101857Jy sigma=0.000616 ! Fit after self-cal, rms=0.101846Jy sigma=0.000616 wmodel J0637-3536_S_2017_09_26_pus_map.mod ! Writing 112 model components to file: J0637-3536_S_2017_09_26_pus_map.mod wobs J0637-3536_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0637-3536_S_2017_09_26_pus_uvs.fits wwins J0637-3536_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0637-3536_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667028 Jy ! Component: 100 - total flux cleaned = 0.000918901 Jy ! Component: 150 - total flux cleaned = 0.000787235 Jy ! Component: 200 - total flux cleaned = 0.000629773 Jy ! Component: 250 - total flux cleaned = 0.000433529 Jy ! Component: 300 - total flux cleaned = 0.000305989 Jy ! Component: 350 - total flux cleaned = 0.000138569 Jy ! Component: 400 - total flux cleaned = 9.49192e-05 Jy ! Component: 450 - total flux cleaned = 0.000115817 Jy ! Component: 500 - total flux cleaned = 0.000136077 Jy ! Component: 550 - total flux cleaned = 0.000117798 Jy ! Component: 600 - total flux cleaned = 4.53106e-05 Jy ! Component: 650 - total flux cleaned = -2.44338e-05 Jy ! Component: 700 - total flux cleaned = -0.000157354 Jy ! Component: 750 - total flux cleaned = -0.000269496 Jy ! Component: 800 - total flux cleaned = -0.000378427 Jy ! Component: 850 - total flux cleaned = -0.000484038 Jy ! Component: 900 - total flux cleaned = -0.000601379 Jy ! Component: 950 - total flux cleaned = -0.000687171 Jy ! Component: 1000 - total flux cleaned = -0.000771374 Jy ! Component: 1050 - total flux cleaned = -0.00086772 Jy ! Component: 1100 - total flux cleaned = -0.000989427 Jy ! Component: 1150 - total flux cleaned = -0.00112235 Jy ! Component: 1200 - total flux cleaned = -0.00125332 Jy ! Component: 1250 - total flux cleaned = -0.0013692 Jy ! Component: 1300 - total flux cleaned = -0.00145822 Jy ! Component: 1350 - total flux cleaned = -0.00157089 Jy ! Component: 1400 - total flux cleaned = -0.00160801 Jy ! Component: 1450 - total flux cleaned = -0.00169359 Jy ! Component: 1500 - total flux cleaned = -0.00176613 Jy ! Component: 1550 - total flux cleaned = -0.00183821 Jy ! Component: 1600 - total flux cleaned = -0.0019339 Jy ! Component: 1650 - total flux cleaned = -0.00201698 Jy ! Component: 1700 - total flux cleaned = -0.00207612 Jy ! Component: 1750 - total flux cleaned = -0.00218181 Jy ! Component: 1800 - total flux cleaned = -0.00224016 Jy ! Component: 1850 - total flux cleaned = -0.00233316 Jy ! Component: 1900 - total flux cleaned = -0.00240249 Jy ! Component: 1950 - total flux cleaned = -0.00248299 Jy ! Component: 2000 - total flux cleaned = -0.00252884 Jy ! Component: 2050 - total flux cleaned = -0.00257456 Jy ! Component: 2100 - total flux cleaned = -0.00260869 Jy ! Component: 2150 - total flux cleaned = -0.00266537 Jy ! Component: 2200 - total flux cleaned = -0.00269925 Jy ! Component: 2250 - total flux cleaned = -0.00275564 Jy ! Component: 2300 - total flux cleaned = -0.00280059 Jy ! Component: 2350 - total flux cleaned = -0.00284552 Jy ! Component: 2400 - total flux cleaned = -0.00290156 Jy ! Component: 2450 - total flux cleaned = -0.00294631 Jy ! Component: 2500 - total flux cleaned = -0.00299087 Jy ! Component: 2550 - total flux cleaned = -0.00303539 Jy ! Component: 2600 - total flux cleaned = -0.00309097 Jy ! Component: 2650 - total flux cleaned = -0.00314648 Jy ! Component: 2700 - total flux cleaned = -0.00320202 Jy ! Component: 2750 - total flux cleaned = -0.00326855 Jy ! Component: 2800 - total flux cleaned = -0.00334623 Jy ! Component: 2850 - total flux cleaned = -0.0034128 Jy ! Component: 2900 - total flux cleaned = -0.00347936 Jy ! Component: 2950 - total flux cleaned = -0.0035459 Jy ! Component: 3000 - total flux cleaned = -0.00357922 Jy ! Component: 3050 - total flux cleaned = -0.00363484 Jy ! Component: 3100 - total flux cleaned = -0.00367944 Jy ! Component: 3150 - total flux cleaned = -0.00371296 Jy ! Component: 3200 - total flux cleaned = -0.00375769 Jy ! Component: 3250 - total flux cleaned = -0.00378013 Jy ! Component: 3300 - total flux cleaned = -0.00379138 Jy ! Component: 3350 - total flux cleaned = -0.00382522 Jy ! Component: 3400 - total flux cleaned = -0.00383657 Jy ! Component: 3450 - total flux cleaned = -0.00384795 Jy ! Component: 3500 - total flux cleaned = -0.00388213 Jy ! Component: 3550 - total flux cleaned = -0.0039164 Jy ! Component: 3600 - total flux cleaned = -0.00393938 Jy ! Component: 3650 - total flux cleaned = -0.00397389 Jy ! Component: 3700 - total flux cleaned = -0.0040319 Jy ! Component: 3750 - total flux cleaned = -0.0040902 Jy ! Component: 3800 - total flux cleaned = -0.00411363 Jy ! Component: 3850 - total flux cleaned = -0.00418433 Jy ! Component: 3900 - total flux cleaned = -0.00424375 Jy ! Component: 3950 - total flux cleaned = -0.00430351 Jy ! Component: 4000 - total flux cleaned = -0.00436364 Jy ! Component: 4050 - total flux cleaned = -0.0044121 Jy ! Total flux subtracted in 4096 components = -0.00447296 Jy ! Clean residual min=-0.000756 max=0.000700 Jy/beam ! Clean residual mean=0.000002 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.136341 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 374 components and 0.136341 Jy ![Exited script file: muppet] wmap "J0637-3536_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 28.52 at -15.09 degrees (North through East) ! Clean map min=-0.0018022 max=0.10022 Jy/beam ! Writing clean map to FITS file: J0637-3536_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.69533 0.69533 1.39066 2.78132 5.56264 11.1253 22.2506 44.5011 89.0023 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 28.52 at -15.09 degrees (North through East) ! Clean map min=-0.0018022 max=0.10022 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0637-3536_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:55:29 2019