! Started logfile: J0637-2942_S_2017_01_21_pus_uvs.log on Sun May 5 15:48:06 2019 obs J0637-2942_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0637-2942_S_2017_01_21_pus_uva.fits ! AN table 1: 95 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.866082 visibilities/baseline/integration-bin. ! Found source: J0637-2942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0637-2942_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955233Jy sigma=0.005695 ! Fit after self-cal, rms=0.920001Jy sigma=0.005532 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.347 mas, bmaj=6.318 mas, bpa=-3.188 degrees ! Estimated noise=2213.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677331 Jy ! Component: 100 - total flux cleaned = 0.0825976 Jy ! Total flux subtracted in 100 components = 0.0825976 Jy ! Clean residual min=-0.006109 max=0.007008 Jy/beam ! Clean residual mean=-0.000036 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.0825976 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0825976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124885Jy sigma=0.000658 ! Fit after self-cal, rms=0.124553Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=7.35 mas, bpa=-2.82 degrees ! Estimated noise=1187.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667624 Jy ! Component: 100 - total flux cleaned = 0.00997453 Jy ! Component: 150 - total flux cleaned = 0.0117732 Jy ! Component: 200 - total flux cleaned = 0.0127847 Jy ! Total flux subtracted in 200 components = 0.0127847 Jy ! Clean residual min=-0.003527 max=0.003655 Jy/beam ! Clean residual mean=-0.000020 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0953824 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.0953823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124263Jy sigma=0.000654 ! Fit after self-cal, rms=0.124322Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.20 LA 0.98 ! MK 1.01 NL 0.98 OV 1.02 PT 1.01 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.16 LA 0.96 ! MK 1.03 NL 1.01 OV 1.04 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.22 LA 0.99 ! MK 1.03 NL 0.98 OV 0.94 PT 0.98 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 0.97 LA 0.98 ! MK 0.96 NL 1.00* OV 0.88 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.124322Jy sigma=0.000654 ! Fit after self-cal, rms=0.128762Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.336 mas, bpa=-2.591 degrees ! Estimated noise=1187.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227167 Jy ! Component: 100 - total flux cleaned = 0.000130036 Jy ! Component: 150 - total flux cleaned = 7.59128e-05 Jy ! Component: 200 - total flux cleaned = 2.80468e-05 Jy ! Total flux subtracted in 200 components = 2.80468e-05 Jy ! Clean residual min=-0.003059 max=0.003090 Jy/beam ! Clean residual mean=-0.000008 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0954104 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0954104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128748Jy sigma=0.000652 ! Fit after self-cal, rms=0.128913Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128913Jy sigma=0.000652 ! Fit after self-cal, rms=0.132362Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.378 mas, bpa=-2.479 degrees ! Estimated noise=1190.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275101 Jy ! Component: 100 - total flux cleaned = 0.000194712 Jy ! Component: 150 - total flux cleaned = 0.000178122 Jy ! Component: 200 - total flux cleaned = 0.000192928 Jy ! Total flux subtracted in 200 components = 0.000192928 Jy ! Clean residual min=-0.002988 max=0.002984 Jy/beam ! Clean residual mean=-0.000003 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0956033 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0956033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132351Jy sigma=0.000651 ! Fit after self-cal, rms=0.132462Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.31258e-05 Jy ! Component: 100 - total flux cleaned = 0.000110394 Jy ! Component: 150 - total flux cleaned = 0.000126441 Jy ! Component: 200 - total flux cleaned = 0.000126976 Jy ! Total flux subtracted in 200 components = 0.000126976 Jy ! Clean residual min=-0.003069 max=0.003001 Jy/beam ! Clean residual mean=-0.000004 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0957303 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0957303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132455Jy sigma=0.000651 ! Fit after self-cal, rms=0.132457Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132457Jy sigma=0.000651 ! Fit after self-cal, rms=0.133869Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.397 mas, bpa=-2.481 degrees ! Estimated noise=1190.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249309 Jy ! Component: 100 - total flux cleaned = 0.000173132 Jy ! Component: 150 - total flux cleaned = 0.00012906 Jy ! Component: 200 - total flux cleaned = 0.000116469 Jy ! Total flux subtracted in 200 components = 0.000116469 Jy ! Clean residual min=-0.003037 max=0.002914 Jy/beam ! Clean residual mean=-0.000003 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.0958468 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0958468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133860Jy sigma=0.000651 ! Fit after self-cal, rms=0.133893Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.84371e-05 Jy ! Component: 100 - total flux cleaned = 5.23784e-05 Jy ! Component: 150 - total flux cleaned = 6.45549e-05 Jy ! Component: 200 - total flux cleaned = 5.35301e-05 Jy ! Total flux subtracted in 200 components = 5.35301e-05 Jy ! Clean residual min=-0.003070 max=0.002933 Jy/beam ! Clean residual mean=-0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0959003 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0959003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133888Jy sigma=0.000651 ! Fit after self-cal, rms=0.133886Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133886Jy sigma=0.000651 ! Fit after self-cal, rms=0.134123Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=19.14 mas, bpa=4.441 degrees ! Estimated noise=1525.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020011 Jy ! Component: 100 - total flux cleaned = 0.000201165 Jy ! Component: 150 - total flux cleaned = 0.000202073 Jy ! Component: 200 - total flux cleaned = 0.000209683 Jy ! Total flux subtracted in 200 components = 0.000209683 Jy ! Clean residual min=-0.002786 max=0.002911 Jy/beam ! Clean residual mean=-0.000005 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.09611 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.09611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134129Jy sigma=0.000651 ! Fit after self-cal, rms=0.134143Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.39757e-05 Jy ! Component: 100 - total flux cleaned = 3.96679e-05 Jy ! Component: 150 - total flux cleaned = 5.00979e-05 Jy ! Component: 200 - total flux cleaned = 4.9159e-05 Jy ! Total flux subtracted in 200 components = 4.9159e-05 Jy ! Clean residual min=-0.002788 max=0.002891 Jy/beam ! Clean residual mean=-0.000004 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0961591 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0961592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134147Jy sigma=0.000651 ! Fit after self-cal, rms=0.134149Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.41 mas, bpa=-2.497 degrees ! Estimated noise=1191.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.41 at -2.497 degrees (North through East) ! Clean map min=-0.002937 max=0.084836 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=6.347 mas, bpa=-2.817 degrees ! Estimated noise=2252.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686574 Jy ! Component: 100 - total flux cleaned = 0.0838483 Jy ! Component: 150 - total flux cleaned = 0.0893826 Jy ! Component: 200 - total flux cleaned = 0.0909452 Jy ! Total flux subtracted in 200 components = 0.0909452 Jy ! Clean residual min=-0.005373 max=0.006000 Jy/beam ! Clean residual mean=-0.000013 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.0909452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0909452 Jy ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.41 mas, bpa=-2.497 degrees ! Estimated noise=1191.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032414 Jy ! Component: 100 - total flux cleaned = 0.00437242 Jy ! Component: 150 - total flux cleaned = 0.0044769 Jy ! Component: 200 - total flux cleaned = 0.00457546 Jy ! Total flux subtracted in 200 components = 0.00457546 Jy ! Clean residual min=-0.003187 max=0.003045 Jy/beam ! Clean residual mean=-0.000005 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0955206 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.0955206 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=19.14 mas, bpa=4.441 degrees ! Estimated noise=1525.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650203 Jy ! Component: 100 - total flux cleaned = 0.000790442 Jy ! Component: 150 - total flux cleaned = 0.000835926 Jy ! Component: 200 - total flux cleaned = 0.000876563 Jy ! Total flux subtracted in 200 components = 0.000876563 Jy ! Clean residual min=-0.002800 max=0.002809 Jy/beam ! Clean residual mean=-0.000003 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0963972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7497e-05 Jy ! Component: 100 - total flux cleaned = 7.10051e-05 Jy ! Component: 150 - total flux cleaned = 8.61291e-05 Jy ! Component: 200 - total flux cleaned = 0.000100454 Jy ! Total flux subtracted in 200 components = 0.000100454 Jy ! Clean residual min=-0.002824 max=0.002802 Jy/beam ! Clean residual mean=-0.000002 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0964976 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0964977 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.41 mas, bpa=-2.497 degrees ! Estimated noise=1191.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.63806e-05 Jy ! Component: 100 - total flux cleaned = -9.44187e-05 Jy ! Component: 150 - total flux cleaned = -0.000126334 Jy ! Component: 200 - total flux cleaned = -0.000156331 Jy ! Total flux subtracted in 200 components = -0.000156331 Jy ! Clean residual min=-0.003148 max=0.002962 Jy/beam ! Clean residual mean=-0.000002 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0963413 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.0963413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134122Jy sigma=0.000651 ! Fit after self-cal, rms=0.134108Jy sigma=0.000651 wmodel J0637-2942_S_2017_01_21_pus_map.mod ! Writing 55 model components to file: J0637-2942_S_2017_01_21_pus_map.mod wobs J0637-2942_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0637-2942_S_2017_01_21_pus_uvs.fits wwins J0637-2942_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J0637-2942_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524998 Jy ! Component: 100 - total flux cleaned = -0.000524166 Jy ! Component: 150 - total flux cleaned = -0.000230492 Jy ! Component: 200 - total flux cleaned = 9.70033e-05 Jy ! Component: 250 - total flux cleaned = 0.000590448 Jy ! Component: 300 - total flux cleaned = 0.000978967 Jy ! Component: 350 - total flux cleaned = 0.0011882 Jy ! Component: 400 - total flux cleaned = 0.00155396 Jy ! Component: 450 - total flux cleaned = 0.00179066 Jy ! Component: 500 - total flux cleaned = 0.00186844 Jy ! Component: 550 - total flux cleaned = 0.00209545 Jy ! Component: 600 - total flux cleaned = 0.00198359 Jy ! Component: 650 - total flux cleaned = 0.00202042 Jy ! Component: 700 - total flux cleaned = 0.00198548 Jy ! Component: 750 - total flux cleaned = 0.00195092 Jy ! Component: 800 - total flux cleaned = 0.00198558 Jy ! Component: 850 - total flux cleaned = 0.00195128 Jy ! Component: 900 - total flux cleaned = 0.0018518 Jy ! Component: 950 - total flux cleaned = 0.00191719 Jy ! Component: 1000 - total flux cleaned = 0.00175593 Jy ! Component: 1050 - total flux cleaned = 0.00172439 Jy ! Component: 1100 - total flux cleaned = 0.00166202 Jy ! Component: 1150 - total flux cleaned = 0.00160028 Jy ! Component: 1200 - total flux cleaned = 0.00160009 Jy ! Component: 1250 - total flux cleaned = 0.00157014 Jy ! Component: 1300 - total flux cleaned = 0.00148037 Jy ! Component: 1350 - total flux cleaned = 0.00142243 Jy ! Component: 1400 - total flux cleaned = 0.0014517 Jy ! Component: 1450 - total flux cleaned = 0.00139441 Jy ! Component: 1500 - total flux cleaned = 0.00136642 Jy ! Component: 1550 - total flux cleaned = 0.00133865 Jy ! Component: 1600 - total flux cleaned = 0.00142149 Jy ! Component: 1650 - total flux cleaned = 0.00136705 Jy ! Component: 1700 - total flux cleaned = 0.00144813 Jy ! Component: 1750 - total flux cleaned = 0.00147435 Jy ! Component: 1800 - total flux cleaned = 0.00152655 Jy ! Component: 1850 - total flux cleaned = 0.00152622 Jy ! Component: 1900 - total flux cleaned = 0.00144813 Jy ! Component: 1950 - total flux cleaned = 0.00157654 Jy ! Component: 2000 - total flux cleaned = 0.00157646 Jy ! Component: 2050 - total flux cleaned = 0.00165229 Jy ! Component: 2100 - total flux cleaned = 0.00172695 Jy ! Component: 2150 - total flux cleaned = 0.00175178 Jy ! Component: 2200 - total flux cleaned = 0.00175194 Jy ! Component: 2250 - total flux cleaned = 0.00187317 Jy ! Component: 2300 - total flux cleaned = 0.00196924 Jy ! Component: 2350 - total flux cleaned = 0.00206452 Jy ! Component: 2400 - total flux cleaned = 0.00208785 Jy ! Component: 2450 - total flux cleaned = 0.00222814 Jy ! Component: 2500 - total flux cleaned = 0.00222796 Jy ! Component: 2550 - total flux cleaned = 0.00234268 Jy ! Component: 2600 - total flux cleaned = 0.00238814 Jy ! Component: 2650 - total flux cleaned = 0.00241088 Jy ! Component: 2700 - total flux cleaned = 0.00252329 Jy ! Component: 2750 - total flux cleaned = 0.00254577 Jy ! Component: 2800 - total flux cleaned = 0.00265602 Jy ! Component: 2850 - total flux cleaned = 0.00272138 Jy ! Component: 2900 - total flux cleaned = 0.00269935 Jy ! Component: 2950 - total flux cleaned = 0.00274273 Jy ! Component: 3000 - total flux cleaned = 0.00278558 Jy ! Component: 3050 - total flux cleaned = 0.002807 Jy ! Component: 3100 - total flux cleaned = 0.00289152 Jy ! Component: 3150 - total flux cleaned = 0.00287053 Jy ! Component: 3200 - total flux cleaned = 0.0029124 Jy ! Component: 3250 - total flux cleaned = 0.00293333 Jy ! Component: 3300 - total flux cleaned = 0.00299521 Jy ! Component: 3350 - total flux cleaned = 0.00305641 Jy ! Component: 3400 - total flux cleaned = 0.00301587 Jy ! Component: 3450 - total flux cleaned = 0.00309666 Jy ! Component: 3500 - total flux cleaned = 0.00309657 Jy ! Component: 3550 - total flux cleaned = 0.00313668 Jy ! Component: 3600 - total flux cleaned = 0.00321591 Jy ! Component: 3650 - total flux cleaned = 0.00329476 Jy ! Component: 3700 - total flux cleaned = 0.00323611 Jy ! Component: 3750 - total flux cleaned = 0.00333352 Jy ! Component: 3800 - total flux cleaned = 0.00341106 Jy ! Component: 3850 - total flux cleaned = 0.00341118 Jy ! Component: 3900 - total flux cleaned = 0.00358353 Jy ! Component: 3950 - total flux cleaned = 0.00364063 Jy ! Component: 4000 - total flux cleaned = 0.0036975 Jy ! Component: 4050 - total flux cleaned = 0.0037918 Jy ! Total flux subtracted in 4096 components = 0.00390432 Jy ! Clean residual min=-0.001121 max=0.001072 Jy/beam ! Clean residual mean=0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.100246 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 321 components and 0.100246 Jy ![Exited script file: muppet] wmap "J0637-2942_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.41 at -2.497 degrees (North through East) ! Clean map min=-0.0023963 max=0.085606 Jy/beam ! Writing clean map to FITS file: J0637-2942_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0856062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13036 1.13036 2.26072 4.52144 9.04288 18.0858 36.1715 72.3431 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.41 at -2.497 degrees (North through East) ! Clean map min=-0.0023963 max=0.085606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0637-2942_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:48:11 2019