! Started logfile: J0637+3322_S_2017_05_01_pus_uvs.log on Wed May 1 18:29:35 2019 obs J0637+3322_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0637+3322_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.947953 visibilities/baseline/integration-bin. ! Found source: J0637+3322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0637+3322_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 523 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964732Jy sigma=0.008890 ! Fit after self-cal, rms=0.947734Jy sigma=0.008761 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=5.518 mas, bpa=-6.106 degrees ! Estimated noise=1039.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425287 Jy ! Component: 100 - total flux cleaned = 0.0525054 Jy ! Total flux subtracted in 100 components = 0.0525054 Jy ! Clean residual min=-0.003639 max=0.003659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0525054 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0525054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090072Jy sigma=0.000667 ! Fit after self-cal, rms=0.089867Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.749 mas, bmaj=6.315 mas, bpa=-4.191 degrees ! Estimated noise=627.541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362336 Jy ! Component: 100 - total flux cleaned = 0.00529536 Jy ! Component: 150 - total flux cleaned = 0.00617222 Jy ! Component: 200 - total flux cleaned = 0.00626392 Jy ! Total flux subtracted in 200 components = 0.00626392 Jy ! Clean residual min=-0.002321 max=0.002100 Jy/beam ! Clean residual mean=-0.000002 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0587693 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.0587693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089735Jy sigma=0.000664 ! Fit after self-cal, rms=0.089736Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 1.01 KP 0.95 ! LA 0.97 MK 0.94 NL 0.91 OV 1.03 ! PT 1.00 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.22 KP 0.97 ! LA 0.91 MK 1.11 NL 1.24 OV 1.00 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.21 KP 1.33 ! LA 1.01 MK 0.96 NL 1.12 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.86 KP 1.00* ! LA 0.97 MK 0.63 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.089736Jy sigma=0.000664 ! Fit after self-cal, rms=0.082857Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=6.272 mas, bpa=-3.484 degrees ! Estimated noise=630.579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658977 Jy ! Component: 100 - total flux cleaned = 0.000684998 Jy ! Component: 150 - total flux cleaned = 0.000702172 Jy ! Component: 200 - total flux cleaned = 0.000673302 Jy ! Total flux subtracted in 200 components = 0.000673302 Jy ! Clean residual min=-0.001880 max=0.001880 Jy/beam ! Clean residual mean=-0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0594426 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0594426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082842Jy sigma=0.000660 ! Fit after self-cal, rms=0.082882Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082882Jy sigma=0.000660 ! Fit after self-cal, rms=0.082493Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=6.298 mas, bpa=-4.072 degrees ! Estimated noise=631.886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.72233e-07 Jy ! Component: 100 - total flux cleaned = 4.96883e-05 Jy ! Component: 150 - total flux cleaned = 3.89876e-05 Jy ! Component: 200 - total flux cleaned = 2.95082e-05 Jy ! Total flux subtracted in 200 components = 2.95082e-05 Jy ! Clean residual min=-0.001529 max=0.001487 Jy/beam ! Clean residual mean=-0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0594721 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0594721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082488Jy sigma=0.000656 ! Fit after self-cal, rms=0.082636Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132401 Jy ! Component: 100 - total flux cleaned = -0.000162882 Jy ! Component: 150 - total flux cleaned = -0.000180235 Jy ! Component: 200 - total flux cleaned = -0.000180036 Jy ! Total flux subtracted in 200 components = -0.000180036 Jy ! Clean residual min=-0.001508 max=0.001444 Jy/beam ! Clean residual mean=-0.000005 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0592921 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0592921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082632Jy sigma=0.000656 ! Fit after self-cal, rms=0.082620Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082620Jy sigma=0.000656 ! Fit after self-cal, rms=0.084155Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=6.303 mas, bpa=-4.267 degrees ! Estimated noise=633.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.60105e-05 Jy ! Component: 100 - total flux cleaned = 6.61932e-05 Jy ! Component: 150 - total flux cleaned = 5.03336e-05 Jy ! Component: 200 - total flux cleaned = 5.02598e-05 Jy ! Total flux subtracted in 200 components = 5.02598e-05 Jy ! Clean residual min=-0.001479 max=0.001446 Jy/beam ! Clean residual mean=-0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0593424 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0593424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084152Jy sigma=0.000656 ! Fit after self-cal, rms=0.084195Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.50457e-05 Jy ! Component: 100 - total flux cleaned = -5.19055e-05 Jy ! Component: 150 - total flux cleaned = -5.21434e-05 Jy ! Component: 200 - total flux cleaned = -6.40439e-05 Jy ! Total flux subtracted in 200 components = -6.40439e-05 Jy ! Clean residual min=-0.001488 max=0.001452 Jy/beam ! Clean residual mean=-0.000005 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0592783 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0592783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084194Jy sigma=0.000655 ! Fit after self-cal, rms=0.084189Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084189Jy sigma=0.000655 ! Fit after self-cal, rms=0.084616Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.863 mas, bmaj=9.54 mas, bpa=-5.071 degrees ! Estimated noise=766.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217521 Jy ! Component: 100 - total flux cleaned = -0.000225568 Jy ! Component: 150 - total flux cleaned = -0.000232852 Jy ! Component: 200 - total flux cleaned = -0.000239681 Jy ! Total flux subtracted in 200 components = -0.000239681 Jy ! Clean residual min=-0.001574 max=0.001620 Jy/beam ! Clean residual mean=-0.000009 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0590386 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0590386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084614Jy sigma=0.000655 ! Fit after self-cal, rms=0.084619Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.34474e-05 Jy ! Component: 100 - total flux cleaned = -5.36729e-05 Jy ! Component: 150 - total flux cleaned = -6.00127e-05 Jy ! Component: 200 - total flux cleaned = -6.5757e-05 Jy ! Total flux subtracted in 200 components = -6.5757e-05 Jy ! Clean residual min=-0.001564 max=0.001607 Jy/beam ! Clean residual mean=-0.000009 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0589729 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.0589729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084618Jy sigma=0.000655 ! Fit after self-cal, rms=0.084618Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=6.306 mas, bpa=-4.554 degrees ! Estimated noise=634.142 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 6.306 at -4.554 degrees (North through East) ! Clean map min=-0.0013982 max=0.054681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=5.497 mas, bpa=-6.872 degrees ! Estimated noise=1027.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422315 Jy ! Component: 100 - total flux cleaned = 0.052597 Jy ! Component: 150 - total flux cleaned = 0.0565513 Jy ! Component: 200 - total flux cleaned = 0.0573413 Jy ! Total flux subtracted in 200 components = 0.0573413 Jy ! Clean residual min=-0.002804 max=0.003168 Jy/beam ! Clean residual mean=-0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0573413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0573413 Jy ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=6.306 mas, bpa=-4.554 degrees ! Estimated noise=634.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010012 Jy ! Component: 100 - total flux cleaned = 0.00127158 Jy ! Component: 150 - total flux cleaned = 0.00140089 Jy ! Component: 200 - total flux cleaned = 0.00144357 Jy ! Total flux subtracted in 200 components = 0.00144357 Jy ! Clean residual min=-0.001497 max=0.001468 Jy/beam ! Clean residual mean=-0.000005 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0587848 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.0587848 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.863 mas, bmaj=9.54 mas, bpa=-5.071 degrees ! Estimated noise=766.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106238 Jy ! Component: 100 - total flux cleaned = 0.000145646 Jy ! Component: 150 - total flux cleaned = 0.000168092 Jy ! Component: 200 - total flux cleaned = 0.000167733 Jy ! Total flux subtracted in 200 components = 0.000167733 Jy ! Clean residual min=-0.001548 max=0.001581 Jy/beam ! Clean residual mean=-0.000009 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0589525 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.89547e-06 Jy ! Component: 100 - total flux cleaned = -1.51498e-05 Jy ! Component: 150 - total flux cleaned = -1.47898e-05 Jy ! Component: 200 - total flux cleaned = -2.10117e-05 Jy ! Total flux subtracted in 200 components = -2.10117e-05 Jy ! Clean residual min=-0.001550 max=0.001577 Jy/beam ! Clean residual mean=-0.000009 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0589315 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0589315 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=6.306 mas, bpa=-4.554 degrees ! Estimated noise=634.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52228e-05 Jy ! Component: 100 - total flux cleaned = -4.51169e-07 Jy ! Component: 150 - total flux cleaned = 1.36324e-05 Jy ! Component: 200 - total flux cleaned = 1.29861e-05 Jy ! Total flux subtracted in 200 components = 1.29861e-05 Jy ! Clean residual min=-0.001468 max=0.001464 Jy/beam ! Clean residual mean=-0.000005 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0589445 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0589445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084625Jy sigma=0.000655 ! Fit after self-cal, rms=0.084625Jy sigma=0.000655 wmodel J0637+3322_S_2017_05_01_pus_map.mod ! Writing 42 model components to file: J0637+3322_S_2017_05_01_pus_map.mod wobs J0637+3322_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0637+3322_S_2017_05_01_pus_uvs.fits wwins J0637+3322_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0637+3322_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164459 Jy ! Component: 100 - total flux cleaned = -0.000241728 Jy ! Component: 150 - total flux cleaned = -0.000315819 Jy ! Component: 200 - total flux cleaned = -0.000364014 Jy ! Component: 250 - total flux cleaned = -0.000434447 Jy ! Component: 300 - total flux cleaned = -0.00045719 Jy ! Component: 350 - total flux cleaned = -0.000434998 Jy ! Component: 400 - total flux cleaned = -0.000369852 Jy ! Component: 450 - total flux cleaned = -0.000349073 Jy ! Component: 500 - total flux cleaned = -0.000496919 Jy ! Component: 550 - total flux cleaned = -0.000579938 Jy ! Component: 600 - total flux cleaned = -0.000661534 Jy ! Component: 650 - total flux cleaned = -0.000782086 Jy ! Component: 700 - total flux cleaned = -0.000801897 Jy ! Component: 750 - total flux cleaned = -0.000939127 Jy ! Component: 800 - total flux cleaned = -0.000997015 Jy ! Component: 850 - total flux cleaned = -0.0011111 Jy ! Component: 900 - total flux cleaned = -0.00113009 Jy ! Component: 950 - total flux cleaned = -0.00126009 Jy ! Component: 1000 - total flux cleaned = -0.00129684 Jy ! Component: 1050 - total flux cleaned = -0.00138753 Jy ! Component: 1100 - total flux cleaned = -0.00145892 Jy ! Component: 1150 - total flux cleaned = -0.00149405 Jy ! Component: 1200 - total flux cleaned = -0.00151161 Jy ! Component: 1250 - total flux cleaned = -0.00161569 Jy ! Component: 1300 - total flux cleaned = -0.00170109 Jy ! Component: 1350 - total flux cleaned = -0.00173501 Jy ! Component: 1400 - total flux cleaned = -0.00180203 Jy ! Component: 1450 - total flux cleaned = -0.00188509 Jy ! Component: 1500 - total flux cleaned = -0.00191798 Jy ! Component: 1550 - total flux cleaned = -0.00201575 Jy ! Component: 1600 - total flux cleaned = -0.00209613 Jy ! Component: 1650 - total flux cleaned = -0.00217568 Jy ! Component: 1700 - total flux cleaned = -0.00227041 Jy ! Component: 1750 - total flux cleaned = -0.00231735 Jy ! Component: 1800 - total flux cleaned = -0.00233273 Jy ! Component: 1850 - total flux cleaned = -0.00244027 Jy ! Component: 1900 - total flux cleaned = -0.0025013 Jy ! Component: 1950 - total flux cleaned = -0.0026069 Jy ! Component: 2000 - total flux cleaned = -0.00268163 Jy ! Component: 2050 - total flux cleaned = -0.00271124 Jy ! Component: 2100 - total flux cleaned = -0.00271141 Jy ! Component: 2150 - total flux cleaned = -0.00287227 Jy ! Component: 2200 - total flux cleaned = -0.00291596 Jy ! Component: 2250 - total flux cleaned = -0.00303095 Jy ! Component: 2300 - total flux cleaned = -0.00310239 Jy ! Component: 2350 - total flux cleaned = -0.00320136 Jy ! Component: 2400 - total flux cleaned = -0.00324336 Jy ! Component: 2450 - total flux cleaned = -0.00328505 Jy ! Component: 2500 - total flux cleaned = -0.00329876 Jy ! Component: 2550 - total flux cleaned = -0.00342219 Jy ! Component: 2600 - total flux cleaned = -0.00349032 Jy ! Component: 2650 - total flux cleaned = -0.00351737 Jy ! Component: 2700 - total flux cleaned = -0.00359798 Jy ! Component: 2750 - total flux cleaned = -0.0036914 Jy ! Component: 2800 - total flux cleaned = -0.0037577 Jy ! Component: 2850 - total flux cleaned = -0.00382347 Jy ! Component: 2900 - total flux cleaned = -0.0038367 Jy ! Component: 2950 - total flux cleaned = -0.00391482 Jy ! Component: 3000 - total flux cleaned = -0.00397952 Jy ! Component: 3050 - total flux cleaned = -0.00408222 Jy ! Component: 3100 - total flux cleaned = -0.00418424 Jy ! Component: 3150 - total flux cleaned = -0.00423498 Jy ! Component: 3200 - total flux cleaned = -0.00426018 Jy ! Component: 3250 - total flux cleaned = -0.00439788 Jy ! Component: 3300 - total flux cleaned = -0.0044476 Jy ! Component: 3350 - total flux cleaned = -0.00447238 Jy ! Component: 3400 - total flux cleaned = -0.00457072 Jy ! Component: 3450 - total flux cleaned = -0.00468041 Jy ! Component: 3500 - total flux cleaned = -0.00474101 Jy ! Component: 3550 - total flux cleaned = -0.00482554 Jy ! Component: 3600 - total flux cleaned = -0.0048975 Jy ! Component: 3650 - total flux cleaned = -0.00493331 Jy ! Component: 3700 - total flux cleaned = -0.00505179 Jy ! Component: 3750 - total flux cleaned = -0.00515776 Jy ! Component: 3800 - total flux cleaned = -0.00523955 Jy ! Component: 3850 - total flux cleaned = -0.00528614 Jy ! Component: 3900 - total flux cleaned = -0.00536729 Jy ! Component: 3950 - total flux cleaned = -0.00540186 Jy ! Component: 4000 - total flux cleaned = -0.00552776 Jy ! Component: 4050 - total flux cleaned = -0.00555052 Jy ! Total flux subtracted in 4096 components = -0.00564115 Jy ! Clean residual min=-0.000624 max=0.000719 Jy/beam ! Clean residual mean=-0.000002 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.0533034 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 339 components and 0.0533034 Jy ![Exited script file: muppet] wmap "J0637+3322_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 6.306 at -4.554 degrees (North through East) ! Clean map min=-0.0013762 max=0.054648 Jy/beam ! Writing clean map to FITS file: J0637+3322_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546479 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16388 1.16388 2.32776 4.65552 9.31105 18.6221 37.2442 74.4884 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 6.306 at -4.554 degrees (North through East) ! Clean map min=-0.0013762 max=0.054648 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0637+3322_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:29:39 2019