! Started logfile: J0635-1821_S_2017_10_21_pus_uvs.log on Sat May 11 20:52:34 2019 obs J0635-1821_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0635-1821_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.899113 visibilities/baseline/integration-bin. ! Found source: J0635-1821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0635-1821_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 957 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966629Jy sigma=0.008161 ! Fit after self-cal, rms=0.940201Jy sigma=0.007958 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=14.83 mas, bpa=-16.53 degrees ! Estimated noise=1363.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462579 Jy ! Component: 100 - total flux cleaned = 0.0589579 Jy ! Total flux subtracted in 100 components = 0.0589579 Jy ! Clean residual min=-0.004550 max=0.005482 Jy/beam ! Clean residual mean=-0.000017 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.0589579 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0589579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096069Jy sigma=0.000719 ! Fit after self-cal, rms=0.095777Jy sigma=0.000717 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=20.3 mas, bpa=-14.19 degrees ! Estimated noise=787.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830667 Jy ! Component: 100 - total flux cleaned = 0.0118876 Jy ! Component: 150 - total flux cleaned = 0.013909 Jy ! Component: 200 - total flux cleaned = 0.0151474 Jy ! Total flux subtracted in 200 components = 0.0151474 Jy ! Clean residual min=-0.003565 max=0.003494 Jy/beam ! Clean residual mean=0.000004 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0741054 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 66 components and 0.0741053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095090Jy sigma=0.000712 ! Fit after self-cal, rms=0.095069Jy sigma=0.000711 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.04 KP 1.10 ! LA 1.07 MK 1.00 NL 0.98 OV 1.04 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.02 KP 1.05 ! LA 1.00 MK 1.08 NL 1.11 OV 1.03 ! PT 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.01 KP 1.09 ! LA 0.82 MK 1.17 NL 1.23 OV 1.00 ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 339 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.095069Jy sigma=0.000711 ! Fit after self-cal, rms=0.094874Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=20.05 mas, bpa=-14.21 degrees ! Estimated noise=813.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155994 Jy ! Component: 100 - total flux cleaned = -0.000185118 Jy ! Component: 150 - total flux cleaned = -0.000234665 Jy ! Component: 200 - total flux cleaned = -0.000254702 Jy ! Total flux subtracted in 200 components = -0.000254702 Jy ! Clean residual min=-0.002527 max=0.002798 Jy/beam ! Clean residual mean=0.000004 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0738506 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.0738506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094849Jy sigma=0.000709 ! Fit after self-cal, rms=0.095027Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095027Jy sigma=0.000708 ! Fit after self-cal, rms=0.095213Jy sigma=0.000707 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=20.05 mas, bpa=-14.2 degrees ! Estimated noise=813.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.74647e-05 Jy ! Component: 100 - total flux cleaned = 4.74023e-05 Jy ! Component: 150 - total flux cleaned = 3.1043e-05 Jy ! Component: 200 - total flux cleaned = 4.66178e-05 Jy ! Total flux subtracted in 200 components = 4.66178e-05 Jy ! Clean residual min=-0.002341 max=0.002515 Jy/beam ! Clean residual mean=-0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0738972 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.0738972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095206Jy sigma=0.000707 ! Fit after self-cal, rms=0.095348Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.08874e-05 Jy ! Component: 100 - total flux cleaned = 4.11516e-05 Jy ! Component: 150 - total flux cleaned = 5.66883e-05 Jy ! Component: 200 - total flux cleaned = 5.70779e-05 Jy ! Total flux subtracted in 200 components = 5.70779e-05 Jy ! Clean residual min=-0.002313 max=0.002467 Jy/beam ! Clean residual mean=-0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0739543 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.0739543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095342Jy sigma=0.000707 ! Fit after self-cal, rms=0.095343Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095343Jy sigma=0.000707 ! Fit after self-cal, rms=0.095436Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=19.97 mas, bpa=-14.22 degrees ! Estimated noise=812.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013088 Jy ! Component: 100 - total flux cleaned = 0.000147301 Jy ! Component: 150 - total flux cleaned = 0.00013111 Jy ! Component: 200 - total flux cleaned = 0.00014546 Jy ! Total flux subtracted in 200 components = 0.00014546 Jy ! Clean residual min=-0.002186 max=0.002485 Jy/beam ! Clean residual mean=-0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0740998 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.0740998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095429Jy sigma=0.000707 ! Fit after self-cal, rms=0.095495Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90533e-05 Jy ! Component: 100 - total flux cleaned = -1.82964e-05 Jy ! Component: 150 - total flux cleaned = -3.55137e-06 Jy ! Component: 200 - total flux cleaned = -3.23062e-06 Jy ! Total flux subtracted in 200 components = -3.23062e-06 Jy ! Clean residual min=-0.002184 max=0.002508 Jy/beam ! Clean residual mean=-0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0740965 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.0740966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095489Jy sigma=0.000707 ! Fit after self-cal, rms=0.095492Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095492Jy sigma=0.000707 ! Fit after self-cal, rms=0.095332Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.505 mas, bmaj=24.97 mas, bpa=-7.736 degrees ! Estimated noise=924.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.34898e-05 Jy ! Component: 100 - total flux cleaned = -0.000140116 Jy ! Component: 150 - total flux cleaned = -0.000174721 Jy ! Component: 200 - total flux cleaned = -0.000205766 Jy ! Total flux subtracted in 200 components = -0.000205766 Jy ! Clean residual min=-0.002400 max=0.003013 Jy/beam ! Clean residual mean=-0.000003 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0738908 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 112 components and 0.0738908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095330Jy sigma=0.000707 ! Fit after self-cal, rms=0.095355Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.97475e-05 Jy ! Component: 100 - total flux cleaned = -9.06822e-05 Jy ! Component: 150 - total flux cleaned = -0.000116479 Jy ! Component: 200 - total flux cleaned = -0.00013986 Jy ! Total flux subtracted in 200 components = -0.00013986 Jy ! Clean residual min=-0.002376 max=0.003016 Jy/beam ! Clean residual mean=-0.000004 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0737509 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.0737509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095355Jy sigma=0.000707 ! Fit after self-cal, rms=0.095352Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=19.88 mas, bpa=-14.26 degrees ! Estimated noise=811.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 19.88 at -14.26 degrees (North through East) ! Clean map min=-0.0021416 max=0.062206 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=14.33 mas, bpa=-16.89 degrees ! Estimated noise=1427.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455311 Jy ! Component: 100 - total flux cleaned = 0.0591808 Jy ! Component: 150 - total flux cleaned = 0.0656714 Jy ! Component: 200 - total flux cleaned = 0.0695972 Jy ! Total flux subtracted in 200 components = 0.0695972 Jy ! Clean residual min=-0.003914 max=0.003778 Jy/beam ! Clean residual mean=-0.000013 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.0695972 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0695972 Jy ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=19.88 mas, bpa=-14.26 degrees ! Estimated noise=811.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304674 Jy ! Component: 100 - total flux cleaned = 0.00393241 Jy ! Component: 150 - total flux cleaned = 0.00415041 Jy ! Component: 200 - total flux cleaned = 0.00428778 Jy ! Total flux subtracted in 200 components = 0.00428778 Jy ! Clean residual min=-0.002217 max=0.002522 Jy/beam ! Clean residual mean=-0.000004 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0738849 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 65 components and 0.073885 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.505 mas, bmaj=24.97 mas, bpa=-7.736 degrees ! Estimated noise=924.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54064e-05 Jy ! Component: 100 - total flux cleaned = -3.9208e-05 Jy ! Component: 150 - total flux cleaned = -7.47273e-05 Jy ! Component: 200 - total flux cleaned = -0.000105197 Jy ! Total flux subtracted in 200 components = -0.000105197 Jy ! Clean residual min=-0.002403 max=0.003004 Jy/beam ! Clean residual mean=-0.000004 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0737798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34765e-05 Jy ! Component: 100 - total flux cleaned = -3.72883e-05 Jy ! Component: 150 - total flux cleaned = -4.77769e-05 Jy ! Component: 200 - total flux cleaned = -7.68569e-05 Jy ! Total flux subtracted in 200 components = -7.68569e-05 Jy ! Clean residual min=-0.002398 max=0.003022 Jy/beam ! Clean residual mean=-0.000004 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0737029 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.0737029 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=19.88 mas, bpa=-14.26 degrees ! Estimated noise=811.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8319e-05 Jy ! Component: 100 - total flux cleaned = -4.84475e-05 Jy ! Component: 150 - total flux cleaned = -4.8371e-05 Jy ! Component: 200 - total flux cleaned = -6.74652e-05 Jy ! Total flux subtracted in 200 components = -6.74652e-05 Jy ! Clean residual min=-0.002181 max=0.002553 Jy/beam ! Clean residual mean=-0.000004 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0736354 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.0736355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095365Jy sigma=0.000707 ! Fit after self-cal, rms=0.095371Jy sigma=0.000707 wmodel J0635-1821_S_2017_10_21_pus_map.mod ! Writing 97 model components to file: J0635-1821_S_2017_10_21_pus_map.mod wobs J0635-1821_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0635-1821_S_2017_10_21_pus_uvs.fits wwins J0635-1821_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0635-1821_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910052 Jy ! Component: 100 - total flux cleaned = 0.00127005 Jy ! Component: 150 - total flux cleaned = 0.00149055 Jy ! Component: 200 - total flux cleaned = 0.00159403 Jy ! Component: 250 - total flux cleaned = 0.00159366 Jy ! Component: 300 - total flux cleaned = 0.001594 Jy ! Component: 350 - total flux cleaned = 0.00150196 Jy ! Component: 400 - total flux cleaned = 0.00135449 Jy ! Component: 450 - total flux cleaned = 0.00121245 Jy ! Component: 500 - total flux cleaned = 0.00118483 Jy ! Component: 550 - total flux cleaned = 0.00115838 Jy ! Component: 600 - total flux cleaned = 0.00110723 Jy ! Component: 650 - total flux cleaned = 0.00110766 Jy ! Component: 700 - total flux cleaned = 0.00101086 Jy ! Component: 750 - total flux cleaned = 0.000987783 Jy ! Component: 800 - total flux cleaned = 0.000941657 Jy ! Component: 850 - total flux cleaned = 0.000986826 Jy ! Component: 900 - total flux cleaned = 0.000987085 Jy ! Component: 950 - total flux cleaned = 0.0010085 Jy ! Component: 1000 - total flux cleaned = 0.00107191 Jy ! Component: 1050 - total flux cleaned = 0.0010924 Jy ! Component: 1100 - total flux cleaned = 0.00107283 Jy ! Component: 1150 - total flux cleaned = 0.00111264 Jy ! Component: 1200 - total flux cleaned = 0.0011321 Jy ! Component: 1250 - total flux cleaned = 0.00115066 Jy ! Component: 1300 - total flux cleaned = 0.00118723 Jy ! Component: 1350 - total flux cleaned = 0.00122354 Jy ! Component: 1400 - total flux cleaned = 0.00120593 Jy ! Component: 1450 - total flux cleaned = 0.00118897 Jy ! Component: 1500 - total flux cleaned = 0.00113745 Jy ! Component: 1550 - total flux cleaned = 0.00110331 Jy ! Component: 1600 - total flux cleaned = 0.001036 Jy ! Component: 1650 - total flux cleaned = 0.000970281 Jy ! Component: 1700 - total flux cleaned = 0.000938002 Jy ! Component: 1750 - total flux cleaned = 0.000905776 Jy ! Component: 1800 - total flux cleaned = 0.000858203 Jy ! Component: 1850 - total flux cleaned = 0.000748654 Jy ! Component: 1900 - total flux cleaned = 0.000686783 Jy ! Component: 1950 - total flux cleaned = 0.000610533 Jy ! Component: 2000 - total flux cleaned = 0.000535562 Jy ! Component: 2050 - total flux cleaned = 0.000520726 Jy ! Component: 2100 - total flux cleaned = 0.000417883 Jy ! Component: 2150 - total flux cleaned = 0.000345363 Jy ! Component: 2200 - total flux cleaned = 0.000287851 Jy ! Component: 2250 - total flux cleaned = 0.000230863 Jy ! Component: 2300 - total flux cleaned = 0.00011885 Jy ! Component: 2350 - total flux cleaned = 9.1128e-05 Jy ! Component: 2400 - total flux cleaned = 6.37423e-05 Jy ! Component: 2450 - total flux cleaned = 9.27561e-06 Jy ! Component: 2500 - total flux cleaned = -4.45526e-05 Jy ! Component: 2550 - total flux cleaned = -8.44797e-05 Jy ! Component: 2600 - total flux cleaned = -9.77535e-05 Jy ! Component: 2650 - total flux cleaned = -0.000150016 Jy ! Component: 2700 - total flux cleaned = -0.000201629 Jy ! Component: 2750 - total flux cleaned = -0.000227037 Jy ! Component: 2800 - total flux cleaned = -0.000264974 Jy ! Component: 2850 - total flux cleaned = -0.00026527 Jy ! Component: 2900 - total flux cleaned = -0.000315141 Jy ! Component: 2950 - total flux cleaned = -0.000315148 Jy ! Component: 3000 - total flux cleaned = -0.000352014 Jy ! Component: 3050 - total flux cleaned = -0.000388266 Jy ! Component: 3100 - total flux cleaned = -0.000376153 Jy ! Component: 3150 - total flux cleaned = -0.000364119 Jy ! Component: 3200 - total flux cleaned = -0.000352263 Jy ! Component: 3250 - total flux cleaned = -0.000352157 Jy ! Component: 3300 - total flux cleaned = -0.000317026 Jy ! Component: 3350 - total flux cleaned = -0.000293728 Jy ! Component: 3400 - total flux cleaned = -0.000259265 Jy ! Component: 3450 - total flux cleaned = -0.000282258 Jy ! Component: 3500 - total flux cleaned = -0.00023665 Jy ! Component: 3550 - total flux cleaned = -0.000236541 Jy ! Component: 3600 - total flux cleaned = -0.000191628 Jy ! Component: 3650 - total flux cleaned = -0.000180608 Jy ! Component: 3700 - total flux cleaned = -0.000158426 Jy ! Component: 3750 - total flux cleaned = -0.000169511 Jy ! Component: 3800 - total flux cleaned = -0.000136626 Jy ! Component: 3850 - total flux cleaned = -0.000114776 Jy ! Component: 3900 - total flux cleaned = -4.98185e-05 Jy ! Component: 3950 - total flux cleaned = -1.75339e-05 Jy ! Component: 4000 - total flux cleaned = -6.81694e-06 Jy ! Component: 4050 - total flux cleaned = -6.76357e-06 Jy ! Total flux subtracted in 4096 components = 4.62991e-05 Jy ! Clean residual min=-0.000667 max=0.000704 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0736817 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 381 components and 0.0736817 Jy ![Exited script file: muppet] wmap "J0635-1821_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 19.88 at -14.26 degrees (North through East) ! Clean map min=-0.0017164 max=0.062132 Jy/beam ! Writing clean map to FITS file: J0635-1821_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0621323 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195743 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.945125 0.945125 1.89025 3.7805 7.561 15.122 30.244 60.488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 19.88 at -14.26 degrees (North through East) ! Clean map min=-0.0017164 max=0.062132 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0635-1821_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:52:39 2019