! Started logfile: J0635-1821_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:40:50 2019 obs J0635-1821_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0635-1821_S_2017_05_31_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88058 visibilities/baseline/integration-bin. ! Found source: J0635-1821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 18228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0635-1821_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 506 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973258Jy sigma=0.006929 ! Fit after self-cal, rms=0.940017Jy sigma=0.006742 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.529 mas, bmaj=7.01 mas, bpa=-6.496 degrees ! Estimated noise=1648.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489666 Jy ! Component: 100 - total flux cleaned = 0.0614746 Jy ! Total flux subtracted in 100 components = 0.0614746 Jy ! Clean residual min=-0.005435 max=0.006082 Jy/beam ! Clean residual mean=-0.000011 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.0614746 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0614746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112782Jy sigma=0.000656 ! Fit after self-cal, rms=0.112435Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.245 mas, bpa=-5.011 degrees ! Estimated noise=853.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627069 Jy ! Component: 100 - total flux cleaned = 0.00913077 Jy ! Component: 150 - total flux cleaned = 0.0104096 Jy ! Component: 200 - total flux cleaned = 0.0106987 Jy ! Total flux subtracted in 200 components = 0.0106987 Jy ! Clean residual min=-0.003390 max=0.002766 Jy/beam ! Clean residual mean=-0.000011 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0721733 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0721733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111956Jy sigma=0.000652 ! Fit after self-cal, rms=0.111938Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.97 HN 1.07 KP 0.99 ! LA 1.01 MK 1.15 NL 0.95 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 1.10 KP 0.96 ! LA 0.96 MK 1.02 NL 1.09 OV 1.05 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.01 KP 0.94 ! LA 0.99 MK 1.06 NL 1.02 OV 0.95 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.85 KP 0.92 ! LA 0.72 MK 0.82 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.111938Jy sigma=0.000652 ! Fit after self-cal, rms=0.106465Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=8.279 mas, bpa=-4.852 degrees ! Estimated noise=854.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68815e-05 Jy ! Component: 100 - total flux cleaned = 4.82459e-05 Jy ! Component: 150 - total flux cleaned = 9.24629e-05 Jy ! Component: 200 - total flux cleaned = 0.000130169 Jy ! Total flux subtracted in 200 components = 0.000130169 Jy ! Clean residual min=-0.002603 max=0.002284 Jy/beam ! Clean residual mean=-0.000009 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0723035 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0723035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106404Jy sigma=0.000649 ! Fit after self-cal, rms=0.106377Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106377Jy sigma=0.000649 ! Fit after self-cal, rms=0.101563Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.175 mas, bpa=-5.169 degrees ! Estimated noise=850.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.23237e-05 Jy ! Component: 100 - total flux cleaned = 7.08543e-05 Jy ! Component: 150 - total flux cleaned = 8.36556e-05 Jy ! Component: 200 - total flux cleaned = 8.39106e-05 Jy ! Total flux subtracted in 200 components = 8.39106e-05 Jy ! Clean residual min=-0.002210 max=0.002132 Jy/beam ! Clean residual mean=-0.000007 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0723874 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 29 components and 0.0723874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101558Jy sigma=0.000647 ! Fit after self-cal, rms=0.101508Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.22469e-05 Jy ! Component: 100 - total flux cleaned = -5.0666e-05 Jy ! Component: 150 - total flux cleaned = -3.631e-05 Jy ! Component: 200 - total flux cleaned = -1.08018e-05 Jy ! Total flux subtracted in 200 components = -1.08018e-05 Jy ! Clean residual min=-0.002257 max=0.002107 Jy/beam ! Clean residual mean=-0.000008 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0723766 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0723766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101501Jy sigma=0.000647 ! Fit after self-cal, rms=0.101487Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101487Jy sigma=0.000646 ! Fit after self-cal, rms=0.101492Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=8.152 mas, bpa=-5.184 degrees ! Estimated noise=848.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.99533e-05 Jy ! Component: 100 - total flux cleaned = 5.53718e-05 Jy ! Component: 150 - total flux cleaned = 6.69062e-05 Jy ! Component: 200 - total flux cleaned = 6.68961e-05 Jy ! Total flux subtracted in 200 components = 6.68961e-05 Jy ! Clean residual min=-0.002187 max=0.002085 Jy/beam ! Clean residual mean=-0.000007 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0724435 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.0724435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101488Jy sigma=0.000646 ! Fit after self-cal, rms=0.101491Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.59557e-05 Jy ! Component: 100 - total flux cleaned = -5.4475e-05 Jy ! Component: 150 - total flux cleaned = -3.40461e-05 Jy ! Component: 200 - total flux cleaned = -4.30052e-05 Jy ! Total flux subtracted in 200 components = -4.30052e-05 Jy ! Clean residual min=-0.002169 max=0.002116 Jy/beam ! Clean residual mean=-0.000007 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0724005 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0724005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101487Jy sigma=0.000646 ! Fit after self-cal, rms=0.101485Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101485Jy sigma=0.000646 ! Fit after self-cal, rms=0.101534Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.445 mas, bmaj=17.19 mas, bpa=-4.441 degrees ! Estimated noise=1071.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267749 Jy ! Component: 100 - total flux cleaned = 0.00024816 Jy ! Component: 150 - total flux cleaned = 0.000240223 Jy ! Component: 200 - total flux cleaned = 0.000233135 Jy ! Total flux subtracted in 200 components = 0.000233135 Jy ! Clean residual min=-0.002472 max=0.002187 Jy/beam ! Clean residual mean=-0.000013 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0726337 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.0726337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101533Jy sigma=0.000646 ! Fit after self-cal, rms=0.101541Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45443e-05 Jy ! Component: 100 - total flux cleaned = 4.53815e-06 Jy ! Component: 150 - total flux cleaned = -1.13564e-05 Jy ! Component: 200 - total flux cleaned = -1.7798e-05 Jy ! Total flux subtracted in 200 components = -1.7798e-05 Jy ! Clean residual min=-0.002462 max=0.002177 Jy/beam ! Clean residual mean=-0.000013 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0726159 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0726159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101540Jy sigma=0.000646 ! Fit after self-cal, rms=0.101540Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.149 mas, bpa=-5.154 degrees ! Estimated noise=847.271 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.149 at -5.154 degrees (North through East) ! Clean map min=-0.0020696 max=0.062894 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.892 mas, bpa=-7.022 degrees ! Estimated noise=1576.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471971 Jy ! Component: 100 - total flux cleaned = 0.0598284 Jy ! Component: 150 - total flux cleaned = 0.0653396 Jy ! Component: 200 - total flux cleaned = 0.0665117 Jy ! Total flux subtracted in 200 components = 0.0665117 Jy ! Clean residual min=-0.004650 max=0.004166 Jy/beam ! Clean residual mean=-0.000004 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.0665117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0665117 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.149 mas, bpa=-5.154 degrees ! Estimated noise=847.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345315 Jy ! Component: 100 - total flux cleaned = 0.00480364 Jy ! Component: 150 - total flux cleaned = 0.00488985 Jy ! Component: 200 - total flux cleaned = 0.00496654 Jy ! Total flux subtracted in 200 components = 0.00496654 Jy ! Clean residual min=-0.002275 max=0.002190 Jy/beam ! Clean residual mean=-0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0714783 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.0714783 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.445 mas, bmaj=17.19 mas, bpa=-4.441 degrees ! Estimated noise=1071.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000884366 Jy ! Component: 100 - total flux cleaned = 0.000885685 Jy ! Component: 150 - total flux cleaned = 0.00088551 Jy ! Component: 200 - total flux cleaned = 0.000885727 Jy ! Total flux subtracted in 200 components = 0.000885727 Jy ! Clean residual min=-0.002506 max=0.002197 Jy/beam ! Clean residual mean=-0.000014 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.072364 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10079e-05 Jy ! Component: 100 - total flux cleaned = 1.0999e-05 Jy ! Component: 150 - total flux cleaned = 1.25296e-05 Jy ! Component: 200 - total flux cleaned = 2.18343e-05 Jy ! Total flux subtracted in 200 components = 2.18343e-05 Jy ! Clean residual min=-0.002489 max=0.002194 Jy/beam ! Clean residual mean=-0.000014 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0723858 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0723858 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.149 mas, bpa=-5.154 degrees ! Estimated noise=847.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258692 Jy ! Component: 100 - total flux cleaned = -0.000314876 Jy ! Component: 150 - total flux cleaned = -0.000289611 Jy ! Component: 200 - total flux cleaned = -0.000247577 Jy ! Total flux subtracted in 200 components = -0.000247577 Jy ! Clean residual min=-0.002257 max=0.002112 Jy/beam ! Clean residual mean=-0.000007 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0721383 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.0721383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101547Jy sigma=0.000646 ! Fit after self-cal, rms=0.101559Jy sigma=0.000646 wmodel J0635-1821_S_2017_05_31_pus_map.mod ! Writing 44 model components to file: J0635-1821_S_2017_05_31_pus_map.mod wobs J0635-1821_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0635-1821_S_2017_05_31_pus_uvs.fits wwins J0635-1821_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0635-1821_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.21599e-05 Jy ! Component: 100 - total flux cleaned = -1.4926e-05 Jy ! Component: 150 - total flux cleaned = 0.000126089 Jy ! Component: 200 - total flux cleaned = 0.000127056 Jy ! Component: 250 - total flux cleaned = -1.23458e-06 Jy ! Component: 300 - total flux cleaned = -0.000125073 Jy ! Component: 350 - total flux cleaned = -0.000215176 Jy ! Component: 400 - total flux cleaned = -0.000331956 Jy ! Component: 450 - total flux cleaned = -0.000446183 Jy ! Component: 500 - total flux cleaned = -0.000391628 Jy ! Component: 550 - total flux cleaned = -0.000527445 Jy ! Component: 600 - total flux cleaned = -0.000579801 Jy ! Component: 650 - total flux cleaned = -0.000553936 Jy ! Component: 700 - total flux cleaned = -0.000680558 Jy ! Component: 750 - total flux cleaned = -0.000729752 Jy ! Component: 800 - total flux cleaned = -0.000778851 Jy ! Component: 850 - total flux cleaned = -0.000850714 Jy ! Component: 900 - total flux cleaned = -0.000874026 Jy ! Component: 950 - total flux cleaned = -0.000942787 Jy ! Component: 1000 - total flux cleaned = -0.000874698 Jy ! Component: 1050 - total flux cleaned = -0.000807978 Jy ! Component: 1100 - total flux cleaned = -0.000786661 Jy ! Component: 1150 - total flux cleaned = -0.000765726 Jy ! Component: 1200 - total flux cleaned = -0.000681425 Jy ! Component: 1250 - total flux cleaned = -0.000681022 Jy ! Component: 1300 - total flux cleaned = -0.000598209 Jy ! Component: 1350 - total flux cleaned = -0.00047669 Jy ! Component: 1400 - total flux cleaned = -0.000416916 Jy ! Component: 1450 - total flux cleaned = -0.000259725 Jy ! Component: 1500 - total flux cleaned = -0.000259884 Jy ! Component: 1550 - total flux cleaned = -0.00012603 Jy ! Component: 1600 - total flux cleaned = -5.05231e-05 Jy ! Component: 1650 - total flux cleaned = 5.35778e-06 Jy ! Component: 1700 - total flux cleaned = 6.04829e-05 Jy ! Component: 1750 - total flux cleaned = 0.00011486 Jy ! Component: 1800 - total flux cleaned = 0.000204403 Jy ! Component: 1850 - total flux cleaned = 0.000275138 Jy ! Component: 1900 - total flux cleaned = 0.00034458 Jy ! Component: 1950 - total flux cleaned = 0.000361894 Jy ! Component: 2000 - total flux cleaned = 0.0004132 Jy ! Component: 2050 - total flux cleaned = 0.000413492 Jy ! Component: 2100 - total flux cleaned = 0.000529943 Jy ! Component: 2150 - total flux cleaned = 0.000529596 Jy ! Component: 2200 - total flux cleaned = 0.00054613 Jy ! Component: 2250 - total flux cleaned = 0.000626649 Jy ! Component: 2300 - total flux cleaned = 0.000610682 Jy ! Component: 2350 - total flux cleaned = 0.000610738 Jy ! Component: 2400 - total flux cleaned = 0.000626616 Jy ! Component: 2450 - total flux cleaned = 0.000642271 Jy ! Component: 2500 - total flux cleaned = 0.000611731 Jy ! Component: 2550 - total flux cleaned = 0.000611791 Jy ! Component: 2600 - total flux cleaned = 0.000641991 Jy ! Component: 2650 - total flux cleaned = 0.000582563 Jy ! Component: 2700 - total flux cleaned = 0.000626662 Jy ! Component: 2750 - total flux cleaned = 0.000597451 Jy ! Component: 2800 - total flux cleaned = 0.000568456 Jy ! Component: 2850 - total flux cleaned = 0.000597261 Jy ! Component: 2900 - total flux cleaned = 0.000554573 Jy ! Component: 2950 - total flux cleaned = 0.000526238 Jy ! Component: 3000 - total flux cleaned = 0.000512217 Jy ! Component: 3050 - total flux cleaned = 0.000484565 Jy ! Component: 3100 - total flux cleaned = 0.000402133 Jy ! Component: 3150 - total flux cleaned = 0.000402107 Jy ! Component: 3200 - total flux cleaned = 0.000347981 Jy ! Component: 3250 - total flux cleaned = 0.000280987 Jy ! Component: 3300 - total flux cleaned = 0.000214559 Jy ! Component: 3350 - total flux cleaned = 0.000214568 Jy ! Component: 3400 - total flux cleaned = 0.000188583 Jy ! Component: 3450 - total flux cleaned = 0.000162563 Jy ! Component: 3500 - total flux cleaned = 0.000149763 Jy ! Component: 3550 - total flux cleaned = 0.000111235 Jy ! Component: 3600 - total flux cleaned = 6.03525e-05 Jy ! Component: 3650 - total flux cleaned = 4.76845e-05 Jy ! Component: 3700 - total flux cleaned = 3.51867e-05 Jy ! Component: 3750 - total flux cleaned = -2.71733e-05 Jy ! Component: 3800 - total flux cleaned = -0.000125965 Jy ! Component: 3850 - total flux cleaned = -0.000150644 Jy ! Component: 3900 - total flux cleaned = -0.000187241 Jy ! Component: 3950 - total flux cleaned = -0.000296087 Jy ! Component: 4000 - total flux cleaned = -0.000344086 Jy ! Component: 4050 - total flux cleaned = -0.000403579 Jy ! Total flux subtracted in 4096 components = -0.00043895 Jy ! Clean residual min=-0.001000 max=0.000599 Jy/beam ! Clean residual mean=-0.000004 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0716993 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 318 components and 0.0716993 Jy ![Exited script file: muppet] wmap "J0635-1821_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.149 at -5.154 degrees (North through East) ! Clean map min=-0.0013717 max=0.062799 Jy/beam ! Writing clean map to FITS file: J0635-1821_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0627987 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209132 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.999056 0.999056 1.99811 3.99623 7.99245 15.9849 31.9698 63.9396 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.149 at -5.154 degrees (North through East) ! Clean map min=-0.0013717 max=0.062799 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0635-1821_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:40:55 2019