! Started logfile: J0633+3642_X_2017_05_01_pus_uvs.log on Wed May 1 19:53:23 2019 obs J0633+3642_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0633+3642_X_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902924 visibilities/baseline/integration-bin. ! Found source: J0633+3642 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 55584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0633+3642_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878770Jy sigma=0.007796 ! Fit after self-cal, rms=0.873346Jy sigma=0.007749 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7699 mas, bmaj=1.309 mas, bpa=-3.816 degrees ! Estimated noise=818.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0971082 Jy ! Component: 100 - total flux cleaned = 0.119584 Jy ! Total flux subtracted in 100 components = 0.119584 Jy ! Clean residual min=-0.003448 max=0.008692 Jy/beam ! Clean residual mean=-0.000015 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.119584 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.119584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078834Jy sigma=0.000672 ! Fit after self-cal, rms=0.078824Jy sigma=0.000672 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971595 Jy ! Component: 100 - total flux cleaned = 0.0148047 Jy ! Total flux subtracted in 100 components = 0.0148047 Jy ! Clean residual min=-0.002952 max=0.005021 Jy/beam ! Clean residual mean=-0.000008 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.134389 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 10 components and 0.134389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077318Jy sigma=0.000657 ! Fit after self-cal, rms=0.077309Jy sigma=0.000657 ! Inverting map ! Added new window around map position (-3, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471572 Jy ! Component: 100 - total flux cleaned = 0.0075066 Jy ! Total flux subtracted in 100 components = 0.0075066 Jy ! Clean residual min=-0.002738 max=0.002619 Jy/beam ! Clean residual mean=-0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.141895 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.141895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076961Jy sigma=0.000654 ! Fit after self-cal, rms=0.076940Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9717 mas, bmaj=1.603 mas, bpa=-3.118 degrees ! Estimated noise=340.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388754 Jy ! Component: 100 - total flux cleaned = 0.00612225 Jy ! Component: 150 - total flux cleaned = 0.00745188 Jy ! Component: 200 - total flux cleaned = 0.00798848 Jy ! Total flux subtracted in 200 components = 0.00798848 Jy ! Clean residual min=-0.001191 max=0.001656 Jy/beam ! Clean residual mean=0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.149884 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.149884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076741Jy sigma=0.000652 ! Fit after self-cal, rms=0.076721Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.02 KP 0.99 ! LA 0.95 MK 0.99 NL 0.98 OV 0.99 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.97 KP 0.98 ! LA 0.97 MK 0.97 NL 1.00 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 0.97 ! LA 0.99 MK 1.00 NL 0.97 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.02 KP 0.99 ! LA 0.98 MK 1.00 NL 1.00 OV 1.02 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.96 KP 0.99 ! LA 0.98 MK 1.04 NL 1.01 OV 0.99 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.96 KP 0.97 ! LA 0.99 MK 0.99 NL 1.01 OV 1.02 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.96 KP 0.97 ! LA 1.01 MK 1.02 NL 0.98 OV 1.02 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.96 KP 0.97 ! LA 0.98 MK 0.98 NL 1.00 OV 1.00 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 0.98 ! LA 0.98 MK 0.95 NL 1.00 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.97 KP 0.97 ! LA 1.00 MK 0.98 NL 1.00 OV 1.01 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 1.09 KP 1.02 ! LA 1.06 MK 1.04 NL 1.03 OV 1.08 ! PT 1.09 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 0.93 ! LA 0.98 MK 0.97 NL 1.04 OV 0.99 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.076721Jy sigma=0.000651 ! Fit after self-cal, rms=0.076287Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9759 mas, bmaj=1.606 mas, bpa=-3.588 degrees ! Estimated noise=339.662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861357 Jy ! Component: 100 - total flux cleaned = 0.00108391 Jy ! Component: 150 - total flux cleaned = 0.00117333 Jy ! Component: 200 - total flux cleaned = 0.00126821 Jy ! Total flux subtracted in 200 components = 0.00126821 Jy ! Clean residual min=-0.000850 max=0.000955 Jy/beam ! Clean residual mean=0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.151152 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.151152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076268Jy sigma=0.000649 ! Fit after self-cal, rms=0.076267Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076267Jy sigma=0.000649 ! Fit after self-cal, rms=0.076443Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9748 mas, bmaj=1.602 mas, bpa=-3.275 degrees ! Estimated noise=339.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500359 Jy ! Component: 100 - total flux cleaned = 0.000675785 Jy ! Component: 150 - total flux cleaned = 0.000761647 Jy ! Component: 200 - total flux cleaned = 0.000825038 Jy ! Total flux subtracted in 200 components = 0.000825038 Jy ! Clean residual min=-0.000765 max=0.000790 Jy/beam ! Clean residual mean=-0.000002 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.151977 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.151977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076437Jy sigma=0.000647 ! Fit after self-cal, rms=0.076449Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126696 Jy ! Component: 100 - total flux cleaned = 0.000173076 Jy ! Component: 150 - total flux cleaned = 0.000198836 Jy ! Component: 200 - total flux cleaned = 0.000230997 Jy ! Total flux subtracted in 200 components = 0.000230997 Jy ! Clean residual min=-0.000750 max=0.000762 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.152208 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.152208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076447Jy sigma=0.000647 ! Fit after self-cal, rms=0.076447Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076447Jy sigma=0.000647 ! Fit after self-cal, rms=0.076613Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9747 mas, bmaj=1.602 mas, bpa=-3.202 degrees ! Estimated noise=340.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319401 Jy ! Component: 100 - total flux cleaned = 0.000429115 Jy ! Component: 150 - total flux cleaned = 0.000476538 Jy ! Component: 200 - total flux cleaned = 0.000505072 Jy ! Total flux subtracted in 200 components = 0.000505072 Jy ! Clean residual min=-0.000758 max=0.000745 Jy/beam ! Clean residual mean=-0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.152713 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.152713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076610Jy sigma=0.000647 ! Fit after self-cal, rms=0.076612Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.36885e-05 Jy ! Component: 100 - total flux cleaned = 0.000115905 Jy ! Component: 150 - total flux cleaned = 0.000133704 Jy ! Component: 200 - total flux cleaned = 0.000161486 Jy ! Total flux subtracted in 200 components = 0.000161486 Jy ! Clean residual min=-0.000750 max=0.000748 Jy/beam ! Clean residual mean=-0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.152875 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.152875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076611Jy sigma=0.000647 ! Fit after self-cal, rms=0.076611Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076611Jy sigma=0.000647 ! Fit after self-cal, rms=0.076669Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=2.598 mas, bpa=-8.352 degrees ! Estimated noise=421.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037912 Jy ! Component: 100 - total flux cleaned = 0.000553386 Jy ! Component: 150 - total flux cleaned = 0.000570471 Jy ! Component: 200 - total flux cleaned = 0.000581352 Jy ! Total flux subtracted in 200 components = 0.000581352 Jy ! Clean residual min=-0.000719 max=0.000782 Jy/beam ! Clean residual mean=-0.000003 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.153456 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.153456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076669Jy sigma=0.000647 ! Fit after self-cal, rms=0.076669Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07375e-05 Jy ! Component: 100 - total flux cleaned = 8.57855e-05 Jy ! Component: 150 - total flux cleaned = 9.06625e-05 Jy ! Component: 200 - total flux cleaned = 9.55426e-05 Jy ! Total flux subtracted in 200 components = 9.55426e-05 Jy ! Clean residual min=-0.000732 max=0.000781 Jy/beam ! Clean residual mean=-0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.153552 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.153552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076669Jy sigma=0.000647 ! Fit after self-cal, rms=0.076669Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9745 mas, bmaj=1.602 mas, bpa=-3.155 degrees ! Estimated noise=340.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9745 x 1.602 at -3.155 degrees (North through East) ! Clean map min=-0.00067981 max=0.12778 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7725 mas, bmaj=1.305 mas, bpa=-3.894 degrees ! Estimated noise=817.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967672 Jy ! Component: 100 - total flux cleaned = 0.119433 Jy ! Component: 150 - total flux cleaned = 0.129119 Jy ! Component: 200 - total flux cleaned = 0.135142 Jy ! Total flux subtracted in 200 components = 0.135142 Jy ! Clean residual min=-0.002659 max=0.003312 Jy/beam ! Clean residual mean=-0.000011 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.135142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.135142 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9745 mas, bmaj=1.602 mas, bpa=-3.155 degrees ! Estimated noise=340.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630468 Jy ! Component: 100 - total flux cleaned = 0.0102293 Jy ! Component: 150 - total flux cleaned = 0.0127726 Jy ! Component: 200 - total flux cleaned = 0.0144692 Jy ! Total flux subtracted in 200 components = 0.0144692 Jy ! Clean residual min=-0.000954 max=0.000992 Jy/beam ! Clean residual mean=-0.000007 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.149611 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.149612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=2.598 mas, bpa=-8.352 degrees ! Estimated noise=421.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178937 Jy ! Component: 100 - total flux cleaned = 0.00268253 Jy ! Component: 150 - total flux cleaned = 0.00319751 Jy ! Component: 200 - total flux cleaned = 0.00352301 Jy ! Total flux subtracted in 200 components = 0.00352301 Jy ! Clean residual min=-0.000776 max=0.000779 Jy/beam ! Clean residual mean=-0.000004 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.153135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123471 Jy ! Component: 100 - total flux cleaned = 0.000193772 Jy ! Component: 150 - total flux cleaned = 0.000260119 Jy ! Component: 200 - total flux cleaned = 0.000305368 Jy ! Total flux subtracted in 200 components = 0.000305368 Jy ! Clean residual min=-0.000766 max=0.000776 Jy/beam ! Clean residual mean=-0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.15344 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 83 components and 0.15344 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9745 mas, bmaj=1.602 mas, bpa=-3.155 degrees ! Estimated noise=340.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170473 Jy ! Component: 100 - total flux cleaned = -0.000155986 Jy ! Component: 150 - total flux cleaned = -0.000115333 Jy ! Component: 200 - total flux cleaned = -0.000103037 Jy ! Total flux subtracted in 200 components = -0.000103037 Jy ! Clean residual min=-0.000728 max=0.000787 Jy/beam ! Clean residual mean=-0.000002 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.153337 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.153337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076678Jy sigma=0.000647 ! Fit after self-cal, rms=0.076675Jy sigma=0.000647 wmodel J0633+3642_X_2017_05_01_pus_map.mod ! Writing 95 model components to file: J0633+3642_X_2017_05_01_pus_map.mod wobs J0633+3642_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0633+3642_X_2017_05_01_pus_uvs.fits wwins J0633+3642_X_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0633+3642_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105872 Jy ! Component: 100 - total flux cleaned = 7.88645e-05 Jy ! Component: 150 - total flux cleaned = 6.62337e-05 Jy ! Component: 200 - total flux cleaned = 4.24246e-05 Jy ! Component: 250 - total flux cleaned = 6.59301e-05 Jy ! Component: 300 - total flux cleaned = 7.72444e-05 Jy ! Component: 350 - total flux cleaned = 6.59722e-05 Jy ! Component: 400 - total flux cleaned = 7.69214e-05 Jy ! Component: 450 - total flux cleaned = 7.67695e-05 Jy ! Component: 500 - total flux cleaned = 8.72631e-05 Jy ! Component: 550 - total flux cleaned = 8.72741e-05 Jy ! Component: 600 - total flux cleaned = 6.68818e-05 Jy ! Component: 650 - total flux cleaned = 3.68715e-05 Jy ! Component: 700 - total flux cleaned = 2.69614e-05 Jy ! Component: 750 - total flux cleaned = -2.31253e-06 Jy ! Component: 800 - total flux cleaned = -1.20737e-05 Jy ! Component: 850 - total flux cleaned = -5.00289e-05 Jy ! Component: 900 - total flux cleaned = -6.87468e-05 Jy ! Component: 950 - total flux cleaned = -6.88229e-05 Jy ! Component: 1000 - total flux cleaned = -0.000105504 Jy ! Component: 1050 - total flux cleaned = -0.000159478 Jy ! Component: 1100 - total flux cleaned = -0.000159196 Jy ! Component: 1150 - total flux cleaned = -0.000176691 Jy ! Component: 1200 - total flux cleaned = -0.000141765 Jy ! Component: 1250 - total flux cleaned = -0.000176329 Jy ! Component: 1300 - total flux cleaned = -0.000142235 Jy ! Component: 1350 - total flux cleaned = -0.000175961 Jy ! Component: 1400 - total flux cleaned = -0.000159229 Jy ! Component: 1450 - total flux cleaned = -0.000134439 Jy ! Component: 1500 - total flux cleaned = -0.000134582 Jy ! Component: 1550 - total flux cleaned = -0.000126578 Jy ! Component: 1600 - total flux cleaned = -0.000110606 Jy ! Component: 1650 - total flux cleaned = -0.0001266 Jy ! Component: 1700 - total flux cleaned = -0.000126567 Jy ! Component: 1750 - total flux cleaned = -0.000103239 Jy ! Component: 1800 - total flux cleaned = -9.54828e-05 Jy ! Component: 1850 - total flux cleaned = -9.53213e-05 Jy ! Component: 1900 - total flux cleaned = -8.77451e-05 Jy ! Component: 1950 - total flux cleaned = -0.000110292 Jy ! Component: 2000 - total flux cleaned = -0.000110327 Jy ! Total flux subtracted in 2048 components = -0.000110339 Jy ! Clean residual min=-0.000393 max=0.000489 Jy/beam ! Clean residual mean=-0.000001 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.153227 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 239 components and 0.153227 Jy ![Exited script file: muppet] wmap "J0633+3642_X_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9745 x 1.602 at -3.155 degrees (North through East) ! Clean map min=-0.0005593 max=0.12783 Jy/beam ! Writing clean map to FITS file: J0633+3642_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127826 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013918 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326646 0.326646 0.653292 1.30658 2.61317 5.22633 10.4527 20.9053 41.8107 83.6213 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9745 x 1.602 at -3.155 degrees (North through East) ! Clean map min=-0.0005593 max=0.12783 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0633+3642_X_2017_05_01_pus_uvs.log closed on Wed May 1 19:53:26 2019